Titanium Gr 2 Tube to Female Pipes Manufacture

 

Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Tube to Female Pipes, which is alloyed with 6 % Aluminum and 4 % Vanadium. Titanium Grade 2 Compression Fittings has good ductility, which allows for cold formability. Hot roll, forge and hot press, initial roughing for Titanium Grade 2 Ferrule Fittings is done at 86 Degree F to 122 Degree F (30 Degree C to 50 Degree C) higher than beta transits, Finish from 1499 Degree F to 1652 Degree F (815 Degree C to 900 Degree C).

This heat treatment process is carried out after Titanium Grade 2 Double Ferrule Fittings has been worked into its final shape but before it is put to use, allowing much easier fabrication of a high – strength product. Annealing of Titanium Grade 2 Double Ferrule Fittings in air oxidizes the surface to a depth of 0.1 mm to 0.2 mm, depending on time and temperature of the treatment. Titanium Grade 2 Female Connector Fittings may be considered in any application where formability and corrosion resistance are important, and strength requirements are moderate.

Titanium Gr 2 Tube to Female Pipes | Titanium Gr 2 Tube to Female Pipes | Titanium Gr 2 Tube to Female Pipes | Titanium Gr 2 Tube to Female Pipes | Titanium Gr 2 Tube to Female Pipes | Titanium Gr 2 Tube to Female Pipes | Titanium Gr 2 Tube to Female Pipes | Titanium Gr 2 Tube to Female Pipes | Titanium Gr 2 Tube to Female Pipes | Titanium Gr 2 Tube to Female Pipes
Titanium Gr 2 Tube to Female Pipes
Titanium Gr 2 Tube to Female Pipes

We also boast an Accredited Testing Laboratory for Grade 2 Titanium Tube Fittings which is unique within the multi – metal and plastic stockholding sector. Most of the applications of Grade 2 Titanium Compression Fittings are in the chemical industries, where the most common uses are reactor autoclaves, piping and fittings, valves, heat exchangers and condensers.

 

Titanium Gr 2 Tube to Female Pipes Specifications
Specifications : ASTM B381 ASME SB 381
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
: 3000 – 4000 PSI
Applicable Temperature
: 150-400 C
Type
: Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.

 

Grade 2 Titanium Tube to Female Pipes Fitting Chemical Composition

Titanium Gr 2 C Ti N Fe H O V Al
0.1 max 99.2 min 0.03 max 0.3 max 0.015 max 0.25 max

Titanium Alloy Gr.2 Tube to Female Pipes Fitting Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
4.5 g/cm3 1665 °C (3030 °F) Psi – 39900 , MPa – 275 Psi – 49900 , MPa – 344 20 %

Equivalent Grades for Grade 2 Titanium Tube to Female Pipes Fitting

STANDARD UNS WERKSTOFF NR.
Titanium Grade 2 R50400 3.7035

 

Titanium Titanium Alloy Gr.2 Tube to Female Pipes Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

 

Titanium Gr 2 Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

 

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

 

Titanium Gr 2 Tube to Female Pipes
Titanium Gr 2 Tube to Female Pipes Manufacture

Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Tube to Female Pipes, which is alloyed with 6 % Aluminum and 4 % Vanadium

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Sachiya Steel International


Leave a Reply

Your email address will not be published. Required fields are marked *


Mumbai

D-2, Office no. 3, Gr. Floor, Bharat Nagar Society, Grant Road (E), Mumbai – 400007.
+91 9769056007

+91 22 66518863

[email protected][email protected]
LOCATIONS

We Are Everywhere


Titanium Gr 2 Tube to Female Pipes Manufacture

OUR NETWORK india

MumbaiDelhiChennai


About Us

Sachiya Steel International

We are an ISO 9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.

We are an ISO TUV  9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.