Sachiya Steel International is a known manufacturer of Cupro Nickel 90 Tube to Female Pipes, which is relatively insensitive to stress corrosion. Because of this, Cu-Ni 90 / 10 Tube Fittings is used for marine hardware, piping systems and sometimes for the propellers, crankshafts and hulls of premium tugboats, fishing boats and other working boats. Small amounts of iron and manganese in these Cupro Nickel 90 / 10 Compression Fittings are added to improve corrosion resistance in high – velocity waters, including seawater.

Copper Nickel 90 / 10 Female Connector Fittings is often used in condensers, condenser plates, distiller tubes, evaporator and heat exchanger tubes, salt water piping, and ferrules. In spite of the appropriate properties of these Cu-Ni 90 / 10 Ferrule Fittings, instances of failure have been experienced in practice. Benefit of Cupro Nickel 90 / 10 Double Ferrule Fittings is its high resistance to befouling: in recent years this has led to sheathing developments particularly for structures and boat hulls.

Cupro Nickel 90 Tube to Female Pipes

These Copper Nickel 90 / 10 Compression Tube Fittings are a copper-nickel alloy with low resistivity suitable for use at temperatures up to 300 Degree C (570 Degree F). Cu-Ni 90 / 10 Female Connector Tube Fittings prevents stress corrosion cracking and pitting and crevice corrosion. These Cu-Ni 90 / 10 Compression Fittings is resistant to acid solutions and highly resistant to stress corrosion cracking, and impingement corrosion.

Cu-Ni 90/10 Tube to Female Pipes Specifications

Specifications : ASTM B122 ASME SB122
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
: 3000 – 4000 PSI
Applicable Temperature
: 150-400 C
: Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.

90/10 Cupro Nickel Tube to Female Pipes Fitting Chemical Composition

Cu-Ni 90/10 Cu Pb Mn Fe Zn Ni
88.6 min 0.05 max 1.0 max 1.8 max 1 max 9-11 max

Cu 90/10 Tube to Female Pipes Fitting Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.1 g/cm3 1443 °C (2430 °F) Psi – 35,000, MPa – 241 Psi -80,000, MPa -551 30 %

Equivalent Grades for 90/10 Cu-Ni Tube to Female Pipes Fitting

Cupro Nickel 90/10 C70600 2.0872

Cupro Nickel 90/10 Tube to Female Pipes Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Cu-Ni 90/10 Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Cupro Nickel 90 Tube to Female Pipes
cupro nickel tubes 90 2f10 heat exchangers 500x500 1

Sachiya Steel International is a known manufacturer of Cupro Nickel 90 Tube to Female Pipes, which is relatively insensitive to stress corrosion.

Product Brand: Sachiya Steel International

Product Currency: INR

Product Price: 180

Product In-Stock: InStock

Editor's Rating: