Fasteners

ASTM A516 Grade 70 Sheets Stockist In India

ASTM A516 Grade 70 Sheets Stockist In India

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality ASTM A516 Grade 70 Sheets, Plates, Coils, which exhibits very good corrosion resistance in concentrated acid. Naturally aerated sulphuric acid in ASTM A516 Gr. 70 Carbon Steel Plates is more corrosive than de – aerated acid in the intermediate concentration range. Sulphuric acid in ASME SA 516 Gr. 70 Carbon Steel Coils is sometimes contaminated with chlorides which increases the corrosively of the solution.

ASTM A516 Grade 70 Sheets

However, ASTM A516 Gr. 70 Carbon Steel Slating Coils has good resistance, also in chloride contaminated sulphuric acid, especially at high concentrations. Heavily cold worked material such as ASME SA 516 Gr. 70 Carbon Steel Perforated Coils, however, can have tensile strengths as high as 220,000 psi (1517 MPa). Sachiya Steel International is one of the well-known dealer and supplier for high quality ASTM A516 Gr. 70 CS Plates, which has the innate ability to form a passive layer that prevents corrosion.

The 18 % minimum chromium content in ASME SA 516 Gr. 70 CS Coils provides corrosion and oxidation resistance, where it also must contain at least 10.5 percent chromium. ASTM A516 Gr. 70 CS Slating Coils may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, Aluminium, copper, nitrogen, phosphorous and selenium. ASME SA 516 Gr. 70 CS Perforated Coils is an economical and practical choice for most environments, but it doesn’t have the chloride resistance.

ASTM A516 Grade 70 Plates Specifications

Specifications : ASTM A516
Thickness : 8-100mm
Width
: 1500-3500mm
Length
: 3000-8000mm
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip etc.

ASTM A516 Grade 70 Plates Chemical Composition

Grade C Mn P S Si
A516 Grade 70 0.27-0.31 0.79 – 1.30 0.035 max 0.035 max 0.13-0.45

ASTM A516 Grade 70 Sheets, Plates Mechanical Properties

Grade Thickness Yield Tensile Elongation
A516 Grade 70  6-100mm MPa -260 min MPa – 485-620 17-21%

ASTM A516 Grade 70 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

ASTM A516 Grade 70 Sheets, Plate Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-06-24T17:05:37+05:30June 9th, 2022|

Bolt Grade 10.9 Manufacturers | 10.9 bolt / Hex Bolts / Nuts / Studs

Sachiya Steel International Supplies A Full Range Of Bolt Grade 10.9 Bolts, Grade 10.9 Screw, Grade 10.9 Nuts At Factory Price In India

Grade 10.9 Bolt is a high tensile bolt. These are made up of carbon steels and low boron steels. The material is heat treated by quenched and tempered methods. Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Grade 10.9 Bolt products in various dimensions and types. The bolts are produced in a way that they have high tensile strength.

Grade 10.9 Bolt

The specification standard used to manufacture the Grade 10.9 Stainless Steel Bolt include medium carbon steel, medium carbon steel alloy and low carbon boron steel. These three grades of steel are heat treated by quenching and tempering the Grade 10.9 Bolt Material. The main features of specified Hex Bolt Class 10.9 include its high tensile strength and good wear resistance. 

These features are the reason why the Grade 10.9 Steel Bolts are used in automotive applications and for bolting large and forged parts. The yield strength of the Class 10.9 Bolt is 940 Mpa and the tensile strength of the Grade 10.9 Nuts is 1040 MPa. Bolts Grade 10.9 are characterized by uniformity in their threading, dimensional accuracy as well as their corrosion resistance which is why they are primarily used in applications like construction, Engineering, and structural steelwork in industries such as petrochemicals, Defence, railways, and mechanical.

The 10.9 grade has around 10.9mm diameter and the applications range from motors, engines, railroad equipment and processing equipment. The Class 10.9 Alloy Steel Hex Bolts have a hexagonally shaped head that could be used with appropriate tools for maximum tightening. This is the most common shape of the bolts. The Grade 10.9 Nut Dimensions vary in length from 20mm to 200mm depending on the use case.

The Grade 10.9 Screw is available in a wide range sizes i.e. – standard, coarse and fine sizes. Besides having variability in their sizes, the Class 10.9 Bolt are available in customizable finishes which are done either as required by the buyer or as required by the end use of the product. The Grade 10.9 Steel Bolts can be coated or plated by finishing the surface of the fastener with Black oxide, White Zinc Plating, Yellow Zinc Plating or they could be Hot Dip Galvanized.

We Sachiya Steel International manufacture and export a broad variety of products, including High Tensile Bolts 10.9 Grade in supreme Quality. We have a well-equipped infrastructure facility where our latest machinery assists us in making items of the accurate and finest quality. We are making these Bolts in a variety of specs and sizes, to satisfy the requirements of the clients. Tempering and quenching are also followed on these 10.9 Grade Bolts. Tempering is also done to modify this alloy.

We fabricate these bolts with a modest quantity of carbon steel and a lesser amount of boron steel. Boron is added to such steels to improve their properties. The formability of 10.9 grade bolt chemical composition improves even when trace amounts of boron are added.

The dimensions are governed by the DIN, EN,ISO 4014 and 4017 standards. The HT Class 10.9 Studs are one type of the fasteners that have threaded ends on both sides. The bolts could also be plain, zinc plated or hot dip galvanized in finish. The different finishes are preferred in different application types. The High Tensile Grade 10.9 Screw is a special type that does not need nuts to fix it onto other components. This grade of bolts have tensile strength Upto 1040 minimum and yield strength up to 940MPa minimum. The Grade 10.9 Stainless Steel Bolt Material Properties make them applicable in engine parts and components. Please contact us for more information on these products and pricing.

Grade 10.9 bolts are commonly used in high-strength situations, i.e. the automobile sector, in particular, needs. The popularity for high tensile bolts 10.9 grade stems from the significant cost savings they provide over common stainless steel grades such as 304 or 316. When increased corrosion resistance, such as oxidation or pitting, is required, stainless steel bolts are regarded to be a much durable. Although they have a higher rate of corrosion, they compensate for this by having superior mechanical qualities at hotter temperatures.

We Grade 10.9 High Tensile bolts manufacturers offer these bolts to a wide range of industries and are used for a variety of purposes. Bolts made of Alloy Steel Grade 10.9 is used in railroad machinery, air compressors, propellers, and processing machinery. Our consumers value our goods for their excellent quality and endurance. We manufacture these items in accordance with international manufacturing standards. We design these goods so that they may be used to their full potential even under difficult situations.

Specification Chart of 10.9 Grade Bolt 

Grades Grade 10.9 Bolt
Standard ASTM A324, ASME SA324
Size Dia M 20 to 100 mm Inch 3/4″ to 3.1/2″
finish Zinc plated / Plain / Hot dip galvanized

Chemical Composition Grade 10.9 Nut

Carbon Steel 10.9 C P S B
0.20-0.55 0.025 0.025 0.003

HT Class 10.9 Studs Mechanical Strength

Grades Size Range PS [MPa] YS (min) [MPa] TS (min) [MPa] Hardness [Rockwell]
Class 10.9 5–100 830 940 1040 C33–39

Grade 10.9 Stainless Steel Bolt Physical Properties

Class and Material Nominal Size Range (mm) Mechanical Properties
Proof Load (MPa) Min. Yield Strength (MPa) Min. Tensile Strength (MPa)
Class 10.9 Alloy steel, quenched and tempered 5mm – 100mm 830 940 1040

Sachiya Steel International is One Of The Leading Manufacturer of Hex Bolt Class 10.9, Hex Head Bolt Grade 10.9 in India. Check Dimension of Hex Bolt Grade 10.9.

Dimensions Schedule Of Class 10.9 Hex Nuts

Diameter M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 M42 M45 M48 M52
Pitch 0.7 0.8 1 1.25 1.5 1.75 2 2 2.5 2.5 2.5 3 3 3.5 3.5 4 4 4.5 4.5 5 5
Across Flat (S) Max

Minimum

7 8 10 13 16 18 21 24 27 30 34 36 41 46 50 55 60 65 70 75 80
6.78 7.78 9.78 12.73 15.73 17.73 20.67 23.67 26.16 29.16 33 35 40 45 49 53.8 510.9 63.1 68.1 73.1 78.1
Thickness (M) Max

Minimum

3.2 4.7 5.2 6.8 8.4 10.8 12.8 14.8 15.8 18 19.4 21.5 23.8 25.6 28.7 31 33.4 34 36 38 42
2.9 4.4 4.9 6.44 8.04 10.37 12.1 14.1 15.1 16.9 18.1 20.2 22.5 24.3 27.4 29.4 31.8 32.4 34.4 36.4 40.4
Across corners (E) Min 7.66 8.79 11.05 14.38 17.77 20.03 23.35 26.75 29.56 32.95 37.29 39.55 45.2 50.85 55.37 60.79 66.44 71.3 76.95 82.6 88.25
Minor Dia at thread (min) 3.242 4.134 4.917 6.647 8.376 10.106 11.835 13.835 15.294 17.294 19.294 20.752 23.752 26.211 29.211 31.67 34.67 37.129 40.129 42.587 46.587
Minor Dia at thread (maximum) 3.422 4.334 5.153 6.912 8.676 10.441 12.210 14.210 15.744 17.774 19.774

Grade 10.9 Hex Bolts Dimensions

Grade 10.9 Hex Bolts Dimensions

                  Grade 10.9 Hex Bolts Dimensions

**All measurements in millimeters**

DIA

M4

M5

M6

M8

M10

M12

M14

M16

M18

M20

M22

M24

M27

M30

M33

M36

M39

M42

M45

M48

M52

Pitch

0.7

0.8

1

1.25

1.5

1.75

2

2.5

3

3.5

4

4.5

5

Grade A upto length

40

50

60

80

100

120

140

150

Grade A not applicable to these dia’s

Head Across Flat (S)

Nom = Max

Min

Grade A

Grade B

7

8

10

13

16

18

21

24

27

30

34

36

41

46

50

55

60

65

70

75

80

6.78

7.78

9.78

12.73

15.73

17.73

20.67

23.67

26.67

29.67

33.38

35.38

Grade A not applicable to these dia’s

6.64

7.64

9.64

12.57

15.57

17.57

20.16

23.16

26.16

29.16

33

35

40

45

49

53.8

510.9

63.1

68.1

73.1

78.1

Head Height (K) Nom

Tol + or –

Grade A

Grade B

2.8

3.5

4

5.3

6.4

7.5

10.9

10

11.5

12.5

14

15

17

18.7

21

22.5

25

26

28

30

33

0.125

0.15

0.18

0.215

Grade A not applicable to these dia’s

0.2

0.24

0.29

0.35

0.42

0.5

Across corners e Min

Grade A

Grade B

7.66

8.79

11.05

14.38

17.77

20.03

23.36

26.75

30.14

33.53

37.72

39.98

Grade A not applicable to these dia’s

7.5

8.63

10.89

14.2

17.59

19.85

22.78

26.17

29.56

32.95

37.29

39.55

45.2

50.85

55.37

60.79

66.44

71.3

76.95

82.6

88.25

Thread Length (b)

For lengths

< or = 125mm

For lengths

> 125mm <= 200mm

For lengths > 200mm

14

16

18

22

26

30

34

38

42

46

50

54

60

66

Not specified as full thread recommended

20

22

24

28

32

36

40

44

48

52

56

60

66

72

78

84

90

96

102

108

116

33

35

37

41

45

49

53

57

61

65

69

73

79

85

91

97

103

109

115

121

129

Major Dia at thread (min)

3.838

4.826

5.794

7.76

9.732

11.701

13.682

15.682

17.623

19.623

21.623

23.577

26.577

29.522

32.522

35.465

38.465

41.437

44.437

47.399

51.399

Major Dia at thread (max)

3.978

4.976

5.974

7.972

9.968

11.966

13.962

15.962

17.958

19.958

21.958

23.952

26.952

29.947

32.947

35.94

38.94

41.937

44.937

47.929

51.929

Grade 10.9 Hex Bolts In Bsw/Bsf Threads To Bs 1083-1965 

All dimensions in Inches

DIA 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 2
BSW Pitch (TPI) 20 18 16 14 12 12 11 10 9 8 7 7 6 5 4.5
BSF PITCH (TPI) 26 22 20 18 16 16 14 12 11 10 9 9 8 8 7 7
Head Across Flat (S) Min

Max

0.438 0.518 0.592 0.702 0.812 0.912 1.000 1.190 1.288 1.468 1.640 1.815 2.005 2.175 2.520 2.700
0.445 0.525 0.600 0.710 0.820 0.920 1.010 1.200 1.300 1.480 1.670 1.860 2.050 2.220 2.580 2.760
Head height (K) Min

Max

0.166 0.208 0.250 0.292 0.333 0.365 0.407 0.480 0.563 0.636 0.710 0.790 0.880 0.960 1.110 1.270
0.176 0.218 0.260 0.302 0.343 0.375 0.417 0.500 0.583 0.666 0.750 0.830 0.920 1.000 1.170 1.330
Across corners e Max 0.51 0.61 0.69 0.82 0.95 1.06 1.17 1.39 1.50 1.71 1.93 2.15 2.37 2.56 2.98 3.19
Thread Length b Min Twice the Dia (2D)
Major Dia at thread BSW (min) 0.2427 0.3046 0.3666 0.4285 0.4904 0.5527 0.6147 0.7390 0.8653 0.9897 1.1140 1.2388 1.4879 1.7369 1.9862
Major Dia at thread BSW (max) 0.2488 0.3112 0.3736 0.4360 0.4985 0.5609 0.6233 0.7482 0.8750 1.000 1.1250 1.250 1.500 1.750 2.000
Major Dia at thread BSF (min) 0.2432 0.3051 0.3671 0.4290 0.4910 0.5533 0.6153 0.7394 0.8658 0.9902 1.1148 1.2395 1.3640 1.4888 1.7380 1.9876
Major Dia at thread BSF (max) 0.2489 0.3113 0.3737 0.4361 0.4985 0.5610 0.6234 0.7482 0.8750 1.000 1.1250 1.250 1.375 1.500

Grade 10.9 Hex Bolts Unc/Unf Threads To Bs 1768-1963

All dimensions in Inches

DIA

1/4

5/16

3/8

7/16

1/2

9/16

5/8

3/4

7/8

1

1 1/8

1 1/4

1 3/8

1 1/2

1 3/4

2

UNC Pitch (TPI)

20

18

16

14

13

12

11

10

9

8

7

7

6

6

5

4.5

UNF Pitch (TPI)

28

24

24

24

20

20

18

16

14

12

NOT RECOMMENDED

Head Across Flat (S) Min

Max

0.430

0.493

0.554

0.617

0.742

0.804

0.929

1.115

1.300

1.488

1.657

1.830

2.017

2.205

2.565

2.940

0.437

0.500

0.562

0.625

0.750

0.812

0.937

1.125

1.312

1.500

1.687

1.875

2.062

2.250

2.625

3.000

Head Height (K) Min

Max

0.153

0.201

0.233

0.281

0.313

0.361

0.393

0.463

0.543

0.597

0.678

0.773

0.838

0.934

1.074

1.203

0.163

0.211

0.243

0.291

0.323

0.371

0.403

0.483

0.563

0.627

0.718

0.813

0.878

0.974

1.134

1.263

Across corners e (MAX)

0.505

0.577

0.650

0.722

0.866

0.938

1.083

1.300

1.515

1.732

1.948

2.165

2.382

2.598

3.031

3.464

Thread Length b (Min)

2D + 1/4” upto bolt length of 6” and 2D + 1/2” for bolt lengths above 6”

Major Dia at thread ( Class 2A) Min for UNC

0.2408

0.3026

0.3643

0.4258

0.4876

0.5495

0.6113

0.7353

0.8592

0.9830

1.1064

1.2314

1.3544

1.4794

1.7268

1.9751

Major Dia at thread (2A) Min for UNF

0.2425

0.3042

0.3667

0.4281

0.4906

0.5524

0.6149

0.7391

0.8631

0.9868

NOT RECOMMENDED

Major Dia at thread Class 2A Max for UNC

0.2490

0.3113

0.3737

0.4361

0.4985

0.5609

0.6234

0.7482

0.8731

0.9980

1.1228

1.2478

1.3726

1.4976

1.7473

1.9971

Grade 10.9 Washers Dimensions

DIA M16 M20 M22 M24 M27 M30 M36
HARDNESS FOR PL. WASHER 35 TO 45 HRC
Hardness for Hot Dip Galvd washer 26 HRC
Outer Dia (Max) d2 34 42 44 50 56 60 72
Inner Dia (Min) d1 18 22 24 26 30 33 39
Thickness (S) 3.1 TO 4.6
Tolerance for OD Minus(-) 1.6 1.9
Tolerance for ID Plus(+) 0.43 0.52 0.62

Hardened And Tempered Washers To Din 6916

All dimensions in mm

DIA

M12

M16

M20

M22

M24

M27

M30

M36

Weight in Kgs for 100 nos

0.703

1.46

1.96

2.43

3.06

5.02

6.32

11.50

Outer Dia (Max) d2

24

30

37

39

44

50

56

66

Inner Dia (Min) d1

13

17

21

23

25

28

31

37

Thickness (S)

3

4

4

4

4

5

5

6

Tolerance for OD Minus(-)

0.52

0.62

1

1.20

Tolerance for ID Plus(+)

0.27

0.33

0.52

0.62

Tolerance for thickness + or –

0.30

0.60

Dimensions of Grade 10.9 Hex Nuts

Dimensions of Grade 10.9 Hex Nuts

Dimensions of Grade 10.9 Hex Nuts

**All measurements in millimeters**

DIA

M4

M5

M6

M8

M10

M12

M14

M16

M18

M20

M22

M24

M27

M30

M33

M36

M39

M42

M45

M48

M52

Pitch

0.7

0.8

1

1.25

1.5

1.75

2

2

2.5

2.5

2.5

3

3

3.5

3.5

4

4

4.5

4.5

5

5

Across Flat (S) Max

Min

7

8

10

13

16

18

21

24

27

30

34

36

41

46

50

55

60

65

70

75

80

6.78

7.78

9.78

12.73

15.73

17.73

20.67

23.67

26.16

29.16

33

35

40

45

49

53.8

510.9

63.1

68.1

73.1

78.1

Thickness (M) Max

Min

3.2

4.7

5.2

6.8

8.4

10.8

12.8

14.8

15.8

18

19.4

21.5

23.8

25.6

28.7

31

33.4

34

36

38

42

2.9

4.4

4.9

6.44

8.04

10.37

12.1

14.1

15.1

16.9

18.1

20.2

22.5

24.3

27.4

29.4

31.8

32.4

34.4

36.4

40.4

Across corners (E) Min

7.66

8.79

11.05

14.38

17.77

20.03

23.35

26.75

29.56

32.95

37.29

39.55

45.2

50.85

55.37

60.79

66.44

71.3

76.95

82.6

88.25

Minor Dia at thread (min)

3.242

4.134

4.917

6.647

8.376

10.106

11.835

13.835

15.294

17.294

19.294

20.752

23.752

26.211

29.211

31.67

34.67

37.129

40.129

42.587

46.587

Minor Dia at thread (max)

3.422

4.334

5.153

6.912

8.676

10.441

12.210

14.210

15.744

17.774

19.774

21.252

24.252

26.771

29.771

32.27

35.27

37.799

40.799

43.297

47.297

Grade 10.9 Hex Nuts In Bsw/Bsf Threads To Bs 1083-1965 Threads To Bs 84

All dimensions in inches

DIA

1/4

5/16

3/8

7/16

1/2

9/16

5/8

3/4

7/8

1

1 1/8

1 1/4

1 3/8

1 1/2

1 3/4

2

BSW Pitch (TPI)

20

18

16

14

12

12

11

10

9

8

7

7

6

5

4.5

BSF PITCH (TPI)

26

22

20

18

16

16

14

12

11

10

9

9

8

8

7

7

WIDTH Across Flat (S) Min

Max

0.438

0.518

0.592

0.702

0.812

0.912

1.000

1.190

1.288

1.468

1.640

1.815

2.005

2.175

2.520

2.700

0.445

0.525

0.600

0.710

0.820

0.920

1.010

1.200

1.300

1.480

1.670

1.860

2.050

2.220

2.580

2.760

Thickness (M) Min

Max

0.190

0.240

0.302

0.365

0.427

0.490

0.552

0.677

0.740

0.865

0.990

1.105

1.230

1.355

1.605

1.730

0.200

0.250

0.312

0.375

0.437

0.500

0.562

0.687

0.750

0.875

1.000

1.125

1.250

1.375

1.625

1.750

Across corners (Max inches)

0.51

0.61

0.69

0.82

0.95

1.06

1.17

1.39

1.50

1.71

1.93

2.15

2.37

2.56

2.98

3.19

Minor Dia at thread BSW (min)

0.1860

0.2413

0.2950

0.3461

0.3932

0.4557

0.5086

0.6220

0.7328

0.8400

0.9420

1.0670

1.2866

1.4938

1.7154

Minor Dia at thread BSW (max)

0.2030

0.2594

0.3145

0.3674

0.4169

0.4794

0.5338

0.6490

0.7620

0.8720

0.9776

1.1026

1.3269

1.5408

1.7668

Minor Dia at thread BSF (min)

0.2008

0.2543

0.3110

0.3663

0.4200

0.4825

0.5336

0.6432

0.7586

0.8720

0.9828

1.1078

1.2150

1.3400

1.5670

1.8170

Minor Dia at thread BSF (max)

0.2125

0.2684

0.3280

0.3844

0.4395

0.5020

0.5549

0.6669

0.7838

0.8990

1.0120

1.1370

1.2470

1.3720

1.6026

1.8526

Grade 10.9 Hex Nuts In Unc/Unf Threads To Bs 1768-1963 Threads To Bs 1580

All dimensions in inches

DIA

1/4

5/16

3/8

7/16

1/2

9/16

5/8

3/4

7/8

1

1 1/8

1 1/4

1 3/8

1 1/2

1 3/4

2

UNC Pitch (TPI)

20

18

16

14

13

12

11

10

9

8

7

7

6

6

5

4.5

UNF Pitch (TPI)

28

24

24

24

20

20

18

16

14

12

NOT RECOMMENDED

Width Across Flat (S) Min

Max

0.430

0.493

0.554

0.617

0.742

0.804

0.929

1.115

1.300

1.488

1.657

1.830

2.017

2.205

2.565

2.940

0.437

0.500

0.562

0.625

0.750

0.812

0.937

1.125

1.312

1.500

1.687

1.875

2.062

2.250

2.625

3.000

Thickness (M) Min

Max

0.214

0.261

0.323

0.370

0.432

0.479

0.542

0.631

0.740

0.844

0.949

1.037

1.147

1.251

1.470

1.684

0.224

0.271

0.333

0.380

0.442

0.489

0.552

0.651

0.760

0.874

0.989

1.087

1.197

1.311

1.530

1.754

Across corners (E) Max

0.505

0.577

0.650

0.722

0.866

0.938

1.083

1.300

1.515

1.732

1.948

2.165

2.382

2.598

3.031

3.464

Minor Dia at thread (min) UNC (2B)

0.1960

0.2520

0.3070

0.3600

0.4170

0.4720

0.5270

0.6420

0.7550

0.8650

0.9700

1.0950

1.1950

1.3200

1.5340

1.7590

Minor Dia at thread (max) UNC (2B)

0.2070

0.2650

0.3210

0.3760

0.4340

0.4900

0.5460

0.6630

0.7780

0.8900

0.9980

1.1230

1.2250

1.3500

1.5680

1.7950

Minor Dia at thread (min) UNF (2B)

0.2110

0.2670

0.3300

0.3830

0.4460

0.5020

0.5650

0.6820

0.7980

0.9100

NOT RECOMMENDED

Minor Dia at thread (max) UNF (2B)

0.2200

0.2770

0.3400

0.3950

0.4570

0.5150

0.5780

0.6960

0.8140

0.9280

High Strength Friction Grip Hex Nuts In Mm Threads To Is 6623-1985 Grades 8s & 10s

All dimensions in mm

DIA

M16

M20

M22

M24

M27

M30

M36

Pitch

2

2.5

2.5

3

3

3.5

4

Head Across Flat (B) Min

26.16

33

35

40

45

49

510.9

Head Across Flat (B) Max

27

34

36

41

46

50

60

Height (H) Min

Max

16.4

19.4

22.3

22.9

26.3

29.1

35

17.1

20.7

23.6

24.2

27.6

30.7

36.6

Across corners C min

29.56

37.29

39.55

45.20

50.85

55.37

66.44

Minor Dia at thread (min)

14.235

17.694

19.694

21.202

24.252

26.761

32.270

Minor Dia at thread (max)

14.610

18.144

20.144

21.702

24.752

27.321

32.870

Application of Grade 10.9 Fasteners

  • HT Studs uses in Petrochemicals
  •  Grade 10.9 Nuts uses in Specialty Chemicals
  •  Grade 10.9 Bolts And Nuts uses in Pharmaceuticals
  •  HT U Bolts uses in Spiral Welded tube for burner pipes and flues
  •  Grade 10.9 Fasteners uses in Gas Processing
  •  HT Fasteners uses in Power Generation
  •  Grade 10.9 Threaded Rod uses in Sea Water Equipment
  •  HT Bolts uses in Off-Shore Oil Drilling Companies
  •  HT Anchor Bolts uses in Heat Exchangers
  •  HT Fasteners uses in Pharmaceutical Equipment

ASTM A324 HT Grade 10.9 Threaded Rod price

High Tensile Gr. 10.9 Fasteners Price List Price Per Pcs
High Tensile class 10.9 Socket Head Cap Screw price USD $3.00
Grade 10.9 Allen bolt price USD $4.00
High Tensile Class 10.9 Hex head bolt price USD $6.00
High Tensile Class 10.9 Nuts price USD $1.20
High Tensile Gr 10.9 Machine bolt price USD $5.00

 

By |2024-05-29T17:54:36+05:30May 7th, 2022|

Alloy Steel B16 Screws Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy Steel B16 Screws, which is often used in food industries, chemical industries, electrical industries, generator industries, shaft industries, cement industries, and gas industries power project. The following is a range of improved properties in Alloy Steel B16 Hex Head Screws (as compared to carbon steels): strength, hardness, toughness, wear resistance, corrosion resistance, hardenability, and hot hardness.

Alloy Steel B16 Screws

The offered Alloy Steel B16 Socket Head Cap Screws are manufactured by our experts using quality approved material with the help of modern technology in accordance with set standards of industry. We are one of the noteworthy enterprises engaged in offering superior quality Alloy Steel B16 Socket Set Screws, which is being made of at our end using best alloy. We are also a prominent firm engaged in manufacturing, trading and exporting a finest quality Alloy Steel B16 Anchore Screws, which are designed and developed in line with the prevailing trend and standards of the industry.

Apart from this, we intend to make the supply of Alloy Steel B16 Blind Rivet Screws to our customers within stipulated time frame. Alloy Steel B16 Concrete Screws has excellent features to offer such as Durability High, Price Reasonable, Quality Good, Working Life Long, Processed Type Forging, Surface Galvanized and so on. Using the best quality material, we are successfully supplying a high quality Alloy Steel B16 Threaded Screws to our esteemed clients all over the country.

Alloy Steel B16 Screws Specifications

Specifications : ASTM A 193 ASME SA 193
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

B16 Alloy Steel Screw Chemical Composition

Alloy Steel B16 C Mn P S Si Ni Cr
0.15 max 1.00 max 0.040 0.030 1.00 max 11.50-13.50

Physical Properties

Dia Minimum
Temperature
° F (°C)
Tensile
Strength
min, ksi
( MPa)
Yield
Strength. min,
0.2% offset, Ksi
( MPa)
Elongation in
4D
min %
Reduction of
Area
min %
Hardness
max
2 1/2″ and under 1200(650) 125(860) 105(725) 18 50 321HB
or 35 HRC
over
21/2″ to 4″
1200(650) 110(760) 95(655) 17 45 302HB
or 33 HRC
over 4″ to
7″
1200(650 ) 100(690) 85(586) 16 45 227HB
or 29 HRC

Mechanical Properties

Grade Size Tensile ksi, min Yield, ksi, min Elong, %, min RA % min
B16 Up to 2-1/2 125 105 18 50
2-5/8 – 4 110 95 17 45
4-1/8 – 7 100 85 16 45

B16 Screws Application Industries

Off-Shore Oil Drilling Companies
Power Generation
Petrochemicals
Gas Processing
Specialty Chemicals
Pharmaceuticals
Pharmaceutical Equipment
Chemical Equipment
Sea Water Equipment
Heat Exchangers
Condensers
Pulp and Paper Industry

B16 Alloy Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-12T18:50:07+05:30March 29th, 2022|

Alloy Steel B7M Screws Manufacturers In India

Alloy Steel B7M Screws Manufacturers In India

Sachiya Steel International is one of  the Leading Manufacturer And Exporter Of High Quality Alloy Steel B7M Screws, where our clients can avail the offered products from us at market leading prices. Alloy Steel B7M Hex Head Screws has less common alloyants which include aluminum, cobalt, copper, cerium, niobium, titanium, tungsten, tin, zinc, lead, and zirconium. By keeping track of the latest technological developments, we are offering a superior quality Alloy Steel B7M Socket Head Cap Screws, which are presented in a plethora to our customers. Our offered Alloy Steel B7M Socket Set Screws are used in under similar service conditions in heat transfer process equipment like boilers, super heaters, heat exchangers and condensers.

Alloy Steel B7M Screws

Available in straight and coil forms, Alloy Steel B7M Anchore Screws find their application for various purposes: Plumbing, Interior fittings, Accessories, and Structural artifacts. Alloy Steel B7M Blind Rivet Screws are present in the market in coil or sheet form after that it is processed into finished products by the manufacturer. With assistance from highly competent and experienced professionals, we are engaged in offering Alloy Steel B7M Concrete Screws, which are being manufactured as per the international standards.

With the vast industrial expertise in the domain, we are able to provide our prestigious customers a wide assortment of Alloy Steel B7M Threaded Screws. Used in diverse industrial applications, Alloy Steel B7M Panel Screws are available in the following sizes, where clients can also avail the same from us at reasonable prices.

Alloy Steel B7M Screws Specifications

Specifications : ASTM A 193 ASME SA 193
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

B7M Alloy Steel Screw Chemical Composition

Alloy Steel B7M C Mn P S Si Cr Mo
0.37-0.49 0.65-1.10 0.035 Max 0.04 Max 0.15-0.35 0.75-1.20 0.15-0.25

Mechanical Properties

Grade Size Tensile ksi, min Yield, ksi, min Elong, %, min RA % min
B7M Up to 2-1/2 125 105 16 50
2-5/8 – 4 115 95 16 50
4-1/8 – 7 100 75 18 50

B7M Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

B7M Alloy Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-14T13:21:51+05:30March 29th, 2022|

Alloy Steel Grade 7 Screw Manufacturers In Saudi Arabia

Alloy Steel Grade 7 Screws Manufacturers In Saudi Arabia

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy Steel Grade 7 Screws, which is available in best market rates to our customers. As a guideline, alloying elements in Alloy Steel Grade 7 Hex Head Screws are added in lower percentages (less than 5 %) to increase strength or hardenability, or in larger percentages (over 5 %) to achieve special properties, such as corrosion resistance or extreme temperature stability. Addition of such alloying elements in Alloy Steel Grade 7 Socket Head Cap Screws is usually for the purpose to increase hardness, strength or chemical resistance.

Alloy Steel Grade 7 Screws

Owing to years of industry experience and knowledge, we have been able to offer a supreme quality of Alloy Steel Grade 7 Socket Set Screws, which are used in different industrial applications in the industries like chemicals, fats, fertilizers, Construction industry, Medical Pharmaceutical, Plumber making tools, etc. Alloy Steel Grade 7 Anchore Screws are also use in food industries, chemical industries, electrical industries, generator industries, shaft industries, cement industries, gas industries, and power project.

High quality of raw materials is used in manufacturing Alloy Steel Grade 7 Blind Rivet Screws, which are being offered in varied shapes and sizes and is appreciated for its durability and toughness. Further, the entire range of Alloy Steel Grade 7 Threaded Screws is tested by a team of quality controllers on various parameters to deliver flawless range to the clients.

Alloy Steel GR 7 Screws Specifications

Specifications : ASTM A 194 ASME SA 194
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

GR 7 Alloy Steel Screw Chemical Composition

Alloy Steel GR 7 C Mn P S Si Mo Cr
0.37-0.49% 0.65-1.10% 0.04% 0.04% 0.15-0.035% 0.15-0.25% 0.75-1.20%

GR 7 Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

GR 7 Alloy Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-24T13:57:04+05:30March 28th, 2022|

Alloy Steel 2HM Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy Steel 2HM Screw, which has some great features to offer such as Long life, Corrosion resistance, Permanence in nature and so on. Alloy Steel Grade 2HM Hex Head Screws finds its uses in exotic and highly – demanding applications, such as in the turbine blades of jet engines, in spacecraft, and in nuclear reactors. Our offered Alloy Steel Grade 2HM Socket Head Cap Screws are increasing owing to its durability and sturdy construction.

Alloy Steel 2HM Screw

Our company is widely appreciated in the domain of supplying accurate and durable Alloy Steel Grade 2HM Socket Set Screws all around the market, which are being made from amended machinery and supreme grade material at our base. Alloy Steel Grade 2HM Anchors Screws is made of using quality alloy and technology to make it provide a smooth function. Alloy Steel Grade 2HM Blind Rivet Screws are available in different shapes, sizes, and specifications to address to the diverse applications, where clients can also avail these from us at affordable prices.

Alloy Steel Grade 2HM Concrete Screws is often used in chemicals, fats, & fertilizers, sugar mills & distilleries, cement industries, ship builders, paper industries, pumps, petrochemicals, etc. Alloy Steel Grade 2HM Threaded Screws are also used in Condenser Plates, Heat Exchangers and Condenser Tubing, Hot Forgings, Radiator Tanks and Cores, Hinges, Pins, Rivets, Buttons, Needles and so on.

Alloy Steel 2HM Screws Specifications

Specifications : ASTM A 194 ASME SA 194
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

2HM Alloy Steel Screw Chemical Composition

Alloy Steel 2 C Mn P S Si Ni Cr
0.40% min 1.00% max 0.040% 0.050% 0.40% max

Mechanical Properties

Specification Material Nominal Size, In. Tempering Temp. °F Proof Load Stress, ksi Hardness Rockwell See Note
Min Max
ASTM A194 Grade 2HM Medium Carbon Steel, Quenched and Tempered 1/4 – 4 1000 150 159 237

2HM Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

2HM Alloy Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-10T17:52:45+05:30March 26th, 2022|

Alloy Steel B16 Screws Manufacturers In Saudi Arabia

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy Steel B16 Screws, which is often used in food industries, chemical industries, electrical industries, generator industries, shaft industries, cement industries, and gas industries power project. The following is a range of improved properties in Alloy Steel B16 Hex Head Screws (as compared to carbon steels): strength, hardness, toughness, wear resistance, corrosion resistance, hardenability, and hot hardness.

Alloy Steel B16 Screws

The offered Alloy Steel B16 Socket Head Cap Screws are manufactured by our experts using quality approved material with the help of modern technology in accordance with set standards of industry. We are one of the noteworthy enterprises engaged in offering superior quality Alloy Steel B16 Socket Set Screws, which is being made of at our end using best alloy. We are also a prominent firm engaged in manufacturing, trading and exporting a finest quality Alloy Steel B16 Anchore Screws, which are designed and developed in line with the prevailing trend and standards of the industry.

Apart from this, we intend to make the supply of Alloy Steel B16 Blind Rivet Screws to our customers within stipulated time frame. Alloy Steel B16 Concrete Screws has excellent features to offer such as Durability High, Price Reasonable, Quality Good, Working Life Long, Processed Type Forging, Surface Galvanized and so on. Using the best quality material, we are successfully supplying a high quality Alloy Steel B16 Threaded Screws to our esteemed clients all over the country.

Alloy Steel B16 Screws Specifications

Specifications : ASTM A 193 ASME SA 193
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

B16 Alloy Steel Screw Chemical Composition

Alloy Steel B16 C Mn P S Si Ni Cr
0.15 max 1.00 max 0.040 0.030 1.00 max 11.50-13.50

Physical Properties

Dia Minimum
Temperature
° F (°C)
Tensile
Strength
min, ksi
( MPa)
Yield
Strength. min,
0.2% offset, Ksi
( MPa)
Elongation in
4D
min %
Reduction of
Area
min %
Hardness
max
2 1/2″ and under 1200(650) 125(860) 105(725) 18 50 321HB
or 35 HRC
over
21/2″ to 4″
1200(650) 110(760) 95(655) 17 45 302HB
or 33 HRC
over 4″ to
7″
1200(650 ) 100(690) 85(586) 16 45 227HB
or 29 HRC

Mechanical Properties

Grade Size Tensile ksi, min Yield, ksi, min Elong, %, min RA % min
B16 Up to 2-1/2 125 105 18 50
2-5/8 – 4 110 95 17 45
4-1/8 – 7 100 85 16 45

B16 Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

B16 Alloy Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-12T18:53:15+05:30March 25th, 2022|

Alloy Steel 2 Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy Steel 2 Screw, which is highly demanded in various residential and commercial sectors. To achieve some of these improved properties like strength, hardness, toughness, wear resistance, corrosion resistance, hardenability, and hot hardness, Alloy Steel Grade 2 Hex Head Screws may require heat treating. The offered Alloy Steel Grade 2 Socket Head Cap Screws can be available from us on numerous sizes options as per the needs of the patrons.

Alloy Steel 2 Screw

Alloy Steel Grade 2 Socket Set Screws has some excellent features to offer such as Rust and abrasion resistant, Highly capacitive, Longevity, Superb accuracy, Sturdy construction, High thermal load bearing capacity and more. Alloy Steel Grade 2 Anchors Screws is often used in a variety of commercial and domestic areas such as cabinet, doors, closet, windows, rooms and bathrooms. Our professionals conduct various tests on Alloy Steel Grade 2 Blind Rivet Screws so as to make sure these are flawless.

We are engaged in trading of Alloy Steel Grade 2 Concrete Screws procured from leading manufacturers, where they are quite soft annealed, quarter hard, half hard and full hard brass metal. Our quality inspector inspects Alloy Steel Grade 2 Threaded Screws according to the international quality standards. We employ ultra – modern techniques and quality approved steel to manufacture Alloy Steel Grade 2 Panel Screws, in accordance with industry set norms and standards.

Alloy Steel 2 Screws Specifications

Specifications : ASTM A 194 ASME SA 194
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

Alloy Steel Screw Chemical Composition

Alloy Steel 2 C Mn P S Si Ni Cr
0.40% min 1.00% max 0.040% 0.050% 0.40% max

Alloy Steel Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-07T18:56:54+05:30March 25th, 2022|

Cupro Nickel 90 Nuts Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Cupro Nickel 90 Nuts And Bolts. These Copper Nickel 90 / 10 Hex Head Bolts have good fabric ability and high inherent resistance to befouling. Cu-Ni 90 / 10 Hex Head Nuts is often used in Condenser Plates, Condensers, Weld Torch Tips, Heat Exchanger Tubes, Valve Bodies, Evaporator Tubes, Pressure Vessels, Distiller Tubes, Pump Impellers for Oil Refining, Ferrules, and Evaporators.

Cupro Nickel 90 Nuts Manufacturer In India | Cupro Nickel 90 Nuts Manufacturer In Mumbai | Cupro Nickel 90 Nuts Exporter In India | Cupro Nickel 90 Nuts Exporter In Mumbai | Cupro Nickel 90 Nuts Supplier In India | Cupro Nickel 90 Nuts Supplier In Mumbai | Cupro Nickel 90 Nuts Stockist In India | Cupro Nickel 90 Nuts Stockist In Mumbai
Cupro Nickel 90 Nuts

Cupro Nickel 90 Nuts

For this reason, these Cupro Nickel 90 / 10 Square Bolts is used for piping, heat exchangers and condensers in seawater systems, marine hardware, and sometimes for the propellers, crankshafts and hulls of premium tugboats, fishing boats and other working boats. Copper Nickel 90 / 10 Eye Bolts have very good resistance to seawater, brine water, organic compounds, salts, diluted non – oxidizing acids, and more. These Cu-Ni 90 / 10 Eye Nuts is often used in Hydraulic lines, Fish cages for aquaculture, Heat exchangers and condensers, Desalination units, Sea water pipe work, Tubes for power plants and ships, Offshore fire water systems, etc.

Cupro Nickel 90 / 10 T-Bolts contain a unique summary of data relating to the physical and mechanical properties of the materials and low, ambient and elevated temperatures which is not available elsewhere. These Copper Nickel 90 / 10 T-Nuts are most commonly specified within the marine, offshore, chemical, and petrochemical and shipbuilding industries and are as well widely used for handling seawater in all types of heat exchanger and cooling plant.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cu-Ni 90/10 Bolt/Nut Specifications
Specifications : ASTM B 151 ASME SB 151
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 90/10 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
90/10 Cupro Nickel Bolt/Nut Chemical Composition
Cu-Ni 90/10 Cu Pb Mn Fe Zn Ni
88.6 min 0.05 max 1.0 max 1.8 max 1 max 9-11 max
Copper Nickel  90/10 Bolt/Nut Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.1 g/cm3 1443 °C (2430 °F) Psi – 35,000, MPa – 241 Psi -80,000, MPa -551 30 %
Equivalent Grades for 90/10 Cu-Ni Bolt/Nut
STANDARD UNS WERKSTOFF NR.
Cupro Nickel 90/10 C70600 2.0872
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cu-Ni 90/10 Bolt/Nut Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
90/10 Cupro Nickel Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cupro Nickel 90 Nuts
Cupro Nickel 90 Nuts

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Cupro Nickel 90 Nuts And Bolts. These Copper Nickel 90 / 10 Hex Head Bolts have good fabric ability and high inherent resistance to befouling.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2022-03-04T13:03:36+05:30March 4th, 2022|

Cupro Nickel 70 Nuts Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of Cupro Nickel 70 Nuts And Bolts, which are recognized for fitting reason in the business sector. Cu-Ni 70 / 30 Hex Head Bolts is often used in Salt Water Flanges, Salt Water Piping, Valve Bodies, Sea Water Service, Fittings, Sea Water Condensers, Salt Water Pipe Fittings, Water Boxes – Salt Water Applications, Pump Bodies and Internal Parts-Sea Water. Applications of Cupro Nickel 70 / 30 Hex Head Nuts include condenser, heat exchanger and distiller tubes, tube sheets and baffles, sale water piping, water boxes, tanks, vats, pressure vessels, process equipment, pumps and valves.

Cupro Nickel 70 Nuts Manufacturer In India | Cupro Nickel 70 Nuts Manufacturer In Mumbai | Cupro Nickel 70 Nuts Exporter In India | Cupro Nickel 70 Nuts Exporter In Mumbai | Cupro Nickel 70 Nuts Supplier In India | Cupro Nickel 70 Nuts Supplier In Mumbai | Cupro Nickel 70 Nuts Stockist In India | Cupro Nickel 70 Nuts Stockist in Mumbai 
Cupro Nickel 70 Nuts

  Cupro Nickel 70 Nuts

The small iron content, up to 0.5 %, gives Copper Nickel 70 / 30 Square Bolts an extraordinary resistance to general corrosion and stress corrosion cracking, making it very suitable and ideal for the marine or industrial industries. Cu-Ni 70 / 30 Square Nuts have been used in auto components, tools for marine exploration and in power plants; additionally, it is applied in coinage.

The soluble nature of nickel in copper provides Cupro Nickel 70 / 30 Eye Bolts with single phase alpha structures. For this reason, Cupro Nickel 70 / 30 Eye Nuts is used for piping, heat exchangers and condensers in seawater systems, marine hardware, and sometimes for the propellers, crankshafts. Being a well-established organization, we are offering a huge range of Copper Nickel 70 / 30 T-Bolts.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cu-Ni 70/30 Bolt/Nut Specifications
Specifications : ASTM B 151 ASME SB 151
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 70/30 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
70/30 Cupro Nickel Bolt/Nut Chemical Composition
Cu-Ni 70/30 Cu Pb Mn Fe Zn Ni
88.6 min 0.05 max 1.0 max 1.8 max 1 max 9-11 max
Copper Nickel 70/30 Bolt/Nut Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.1 g/cm3 1443 °C (2430 °F) Psi – 35,000, MPa – 241 Psi -80,000, MPa -551 30 %
Equivalent Grades for 70/30 Cu-Ni Bolt/Nut
STANDARD UNS WERKSTOFF NR.
Cupro Nickel 70/30 C71500 2.0882
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cu-Ni 70/30 Bolt/Nut Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
70/30 Cupro Nickel Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cupro Nickel 70 Nuts
Cupro Nickel 70 Nuts Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of Cupro Nickel 70 Nuts And Bolts, which are recognized for fitting reason in the business sector. Cu-Ni 70 / 30 Hex Head Bolts is often used in Salt Water Flanges, Salt Water Piping, Valve Bodies, Sea Water Service, Fittings, Sea Water Condensers, Salt Water Pipe Fittings, Water Boxes – Salt Water Applications, Pump Bodies and Internal Parts-Sea Water.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2022-03-04T12:50:52+05:30March 4th, 2022|
Go to Top