Tube to Male Fittings

Incoloy 330 Tube to Male Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Incoloy 330 Tube to Male Fittings to the clients, which is readily welded and is formed much like standard stainless steels. The ultra – high nickel content of 34 % to 37 % of Inconel 330 Compression Fittings also provides high resistance to chloride stress corrosion cracking and embrittlement from the precipitation of sigma phase in most furnace atmospheres. The oxidation resistance is also enhanced by the silicon content of Inconel 330 Tube Fittings, where any hot work should commence at 2100 Degree F – 2150 Degree F and finish at 1800 Degree F.

Incoloy 330 Tube to Male Fittings

Inconel 330 Male Connector Fittings is often used in Condensers, Heat Exchangers, Pulp and Paper Industry etc. In general, Inconel 330 Compression Tube Fittings outperforms almost all stainless steels along with the higher – carbon variants of 304 and 316. SS 330 Male Connector Fittings is also used in muffles, retorts, conveyor systems, baskets and boxes and various fixtures. Ra 330 Male Connector Fittings offers benefits in these conditions including resistance to hydrogen chloride and hydrogen sulfide, and helping to reduce PTA or chloride stress corrosion cracking.

Alloy 330 Male Connector Fittings is an austenitic heat and corrosion resisting alloy offering an exceptional combination of strength and resistance to carburization, oxidation and thermal shock. Ra 330 Tube Fittings has oxidation resistance to 2100 Degree F and resistant to carburization and nitriding.

Incoloy 330/SS 330/Ra 330 Tube to Male Fittings Specifications

Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Incoloy, 300/1000/3000PSI for Brass

Incoloy Alloy 330/SS 330/Ra 330 Tube To Male Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Sn Pb
330 0.08 max 2.00 max 0.75-1.50 0.03 max 1.00 max Balance 34.0-37.0 17.0-20.0 0.025 0.005 max

Equivalent Grades for 330/SS 330/Ra 330 Incoloy Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS
Incoloy 330 1.4886 N08330

Alloy 330/SS 330/Ra 330 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Incoloy 330/SS 330/Ra 330 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-05T15:22:48+05:30November 15th, 2021|Tube to Male Fittings|

Incoloy 800 Tube to Male Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Incoloy 800 Tube to Male Fittings, which has good resistance to several sulfur – containing atmosphere. Incoloy 800 Tube Fittings offers general corrosion resistance to a lot of aqueous media and, by virtue of its content of nickel, resists stress corrosion cracking. Incoloy 800H Tube Fittings remains stable in long term high temperature service. Incoloy 800HT Tube Fittings has high creep and stress-rupture characteristics in the 1100 Degree F to 1800 Degree F temperature range. Other characteristics of Incoloy 800 Compression Fittings are good strength, and high resistance to reducing, oxidizing and aqueous environments.

Incoloy 800 Tube to Male Fittings

Incoloy 800H Compression Fittings is a widely used material of construction for equipment that must have high strength and resist carburization, oxidation and other harmful effects of high – temperature exposure. Incoloy 800HT Compression Fittings features a restricted elemental structure that is within standard 800H chemistry but also requires heat treating. The majority of Incoloy 800 Male Connector Fittings make additions to a nickel – iron – chromium base.

Incoloy 800H Male Connector Fittings offers elevated temperature performance in the petrochemical industry as it prevents the formation of embrittling sigma phase subsequent to prolong use up to 1200 Degree F or 649 Degree C. At elevated temperatures, Incoloy 800HT Male Connector Fittings offers resistance to oxidation, carburization, and suffixation along with rupture and creep strength.

Incoloy 800 / 800H / 800HT Tube to Male Fittings Specifications

Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Incoloy, 300/1000/3000PSI for Brass

Incoloy Alloy 800 / 800H / 800HT Tube To Male Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Al Ti
800 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60ᴬ 0.15 – 0.60ᴬ

Incoloy 800 / 800H / 800HT Tube To Male Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
800 / 800H / 800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 800 / 800H / 800HT Incoloy Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21 XH32T

Incoloy Alloy 800 / 800H / 800HT Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Incoloy 800 / 800H / 800HT Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-05T17:49:11+05:30November 13th, 2021|Tube to Male Fittings|

Inconel 601 Tube to Male Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Inconel 601 Tube to Male Fittings, which can operate from cryogenic temperatures up to 645 Degree F (340 Degree C). The nickel base of Inconel 601 Tube Fittings, in conjunction with substantial chromium content, provides resistance to many corrosive media and high – temperature environments. The field of use for Inconel 601 Compression Fittings extends to industrial furnace retorts and muffles, jigs, fixtures, baskets, wire annealing tubes which have all been produced in this excellent high temperature material. Inconel 601 Compression Tube Fittings has great aqueous corrosion resistance, high mechanical strength and is easily produced, welded and machined.

Inconel 601 Tube to Male Fittings

Inconel 601 Male Connector Fittings has good resistance to nitriding in dissociated ammonia, and is only outperformed by Inconel 601 in this application. Solution treating is the treatment normally applied to Inconel 601 Ferrule Fittings involving exposure to temperatures of 1000 Degree F and higher, annealing to parts exposed to temperatures below 1000 Degree F. Inconel 601 Double Ferrule Fittings is often used for tube supports and ash trays in the power generation industry.

In petrochemical processing, Alloy 601 Tube Fittings is used for catalyst regenerators and air preheaters in the manufacture of high – density polyethylene. Alloy 601 Compression Fittings is also used in tubes, retorts, chain curtains, flame shields and conveyor belts for industrial furnaces. Alloy 601 Male Connector Fittings is formed using all conventional techniques.

Inconel 601 Tube to Male Fittings Specifications

Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Inconel, 300/1000/3000PSI for Brass

Inconel Alloy 601 Tube To Male Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Inconel 601 0.10 max 1.00 max 0.50 max 0.015max 1.00 max Balance 58.0 – 63.0 21.0 – 25.0

Inconel 601 Tube To Male Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 601 8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 601 Inconel Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe

Alloy 601 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Inconel 601 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-05T18:06:36+05:30November 11th, 2021|Tube to Male Fittings|

Inconel 600 Tube to Male Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Inconel 600 Tube to Male Fittings in various sizes and dimensions, which has Carburization resistance and Oxidation resistance to 2000 Degree F. Heavy duty machining equipment and tooling in Inconel 600 Tube Fittings should be used to minimize chatter or work – hardening of the alloy ahead of the cutting. Besides heat – treating industries, Inconel 600 Compression Fittings is as well used in furnace component, aerospace, pulp and paper, chemical industries and nuclear engineering. Inconel 600 Compression Tube Fittings is a superior choice for: heat exchanger tubing and nuclear reactor vessels.

Inconel 600 Tube to Male Fittings

Typical corrosion applications of Inconel 600 Male Connector Fittings include titanium dioxide production (chloride route), vinyl chloride monomer (VCM), magnesium chloride, and perchloroethylene syntheses. Softening by annealing begins at about 1600 Degree F (871 Degree C), these Inconel 600 Ferrule Fittings is reasonably complete after 10 to 15 minutes of heating at 1800 Degree F (982 Degree C). Inconel 600 Double Ferrule Fittings is slightly more machinable compared to 304 stainless steel and should be performed by means of tools large enough to handle the loads.

Applications of Alloy 600 Tube Fittings include heaters, bubble towers, stills and condensers for processing of fatty acids. Alloy 600 Male Connector Fittings is combination of Nickel Chromium and Iron provides a standard material for the chemical industry and the automotive engine, aero – engine and airframe sectors.

Inconel 600 Tube to Male Fittings Specifications

Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Inconel, 300/1000/3000PSI for Brass

Inconel Alloy 600 Tube To Male Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Inconel 600 0.15 max 1.00 max 0.50 max 0.015max 0.50 max 6.00 – 10.00 72.00 min 14.00 – 17.00

Inconel 600 Tube To Male Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 600 8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %

Equivalent Grades for 600 Inconel Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 600 2.4816 N06600 NCF 600 NA 13 МНЖМц 28-2,5-1,5 NC15FE11M NiCr15Fe

Alloy 600 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Inconel 600 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-05T18:50:08+05:30November 11th, 2021|Tube to Male Fittings|

Stainless Steel 316TI Tube to Male Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Stainless Steel 316TI Tube to Male Fittings, which is а nісkеl – іrоn – сhrоmіum аustеnіtіс аllоу that wаs dеvеlореd for. The main intent when Stainless Steel 316Ti Tube Fittings was developed was for mахіmum rеsіstаnсе to асіd аttасk, sресіfісаllу Sulphur асіd. Stainless Steel 316TI Compression Fittings hаs ехсеllеnt rеsіstаnсе tо gеnеrаl соrrоsіоn, ріttіng, аnd сrеvісе соrrоsіоn іn сhеmісаls соntаіnіng сhlоrіdеs аnd sulfurіс, рhоsрhоrіс, аnd nіtrіс асіds. Stainless Steel 316Ti Male Connector Fittings аlsо соntаіns nіоbіum fоr stаbіlіzаtіоn аgаіnst sеnsіtіzаtіоn аnd rеsultаnt іntеrgrаnulаr соrrоsіоn. Stainless Steel 316Ti Compression Tube Fittings соmbіnеs ехсеllеnt соrrоsіоn rеsіstаnсе wіth еlеvаtеd mесhаnісаl рrореrtіеs аnd rеlаtіvеlу еаsу fаbrісаtіоn.

Stainless Steel 316TI Tube to Male Fittings

Аlthоugh оrіgіnаllу dеsіgnеd fоr usе іn sulfurіс асіd rеlаtеd іndustrіеs, Stainless Steel 316Ti Ferrule Tube Fittings іs nоw а рорulаr сhоісе fоr а wіdе vаrіеtу оf іndustrіеs іnсludіng thе сhеmісаl, fооd, рhаrmасеutісаl, аnd рlаstісs іndustrіеs. Іn аddіtіоn, Stainless Steel 316TI Double Ferrule Tube Fittings іs usеd іn hеаt ехсhаngеrs, mіхіng tаnks, mеtаl сlеаnіng аnd рісklіng еquірmеnt, аnd ріріng.

316Ti Stainless Steel Male Connector Fittings саn bе rеаdіlу wеldеd usіng gаs tungstеn аrс (GТАW), gаs mеtаl аrс (GМАW), оr shіеldеd mеtаl аrс (ЅМАW) wеldіng tесhnіquеs. 316TI Stainless Steel Compression Fittings rеsіsts thе fоrmаtіоn оf аnу grаіn bоundаrу рrесіріtаtеs іn thе wеld’s hеаt – аffесtеd zоnе, рrоvіdіng ехсеllеnt аs – wеldеd соndіtіоns fоr рrосеss аррlісаtіоns іn сhеmісаl-bаsеd іndustrіеs suсh аs fооd, bеvеrаgе, реrsоnаl саrе, аnd рhаrmасеutісаl.

Stainless Steel 316TI Tube to Male Fittings Specifications

Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass

SS 316TI Tube To Male Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 316TI 0.08 max 2 max 0.75 max 0.045 max 0.030 max 16.00 – 18.00 2.00 – 3.00 10.00 – 14.00 68.395 min

Stainless Steel 316TI Tube To Male Fittings Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 316TI Stainless Steel Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316TI 1.4571 S31635 SUS 316Ti 320S31 08Ch17N13M2T Z6CNDT17‐123 X6CrNiMoTi17-12-2

SS 316TI Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 316TI Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-07T11:16:12+05:30October 30th, 2021|Tube to Male Fittings|

Stainless Steel 316 Tube to Male Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 316 Tube to Male Fittings, where minimum values of toughness are specified for different applications.  Stainless Steel 316 Tube Fittings is possible for the magnetic permeability of austenitic steels to be changed during processing. For example, cold work and welding of Stainless Steel 316L Tube Fittings are liable to increase the amount of martensite and ferrite respectively in the steel. A familiar example of Stainless Steel 316 Compression Fittings is in a sink where the flat drainer has little magnetic response whereas the pressed bowl has a higher response due to the formation of martensite particularly in the corners.

Stainless Steel 316 Tube to Male Fittings

In practical terms, Stainless Steel 316L Compression Fittings are used for “non-magnetic” applications, for example magnetic resonance imaging (MRI). Stainless Steel 316 Male Run Tee are extensively used for service down to as low as liquid helium temperature (-269 degree C). Stainless Steel 316L Male Connector Fittings is largely due to the lack of a clearly defined transition from ductile to brittle fracture in impact toughness testing.

Toughness of SS 316 Ferrule Fittings is measured by impacting a small sample with a swinging hammer, where the distance which the hammer swings after impact is a measure of the toughness. The shorter the distance, the tougher SS 316 Double Ferrule Fittings as the energy of the hammer is absorbed by the sample.

Stainless Steel 316/316L Tube to Male Fittings Specifications

Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass

SS 316/316L Tube To Male Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 316 0.08 max 2 max 1.0 max 0.045 max 0.030 max 16.00 – 18.00 2.00 – 3.00 11.00 – 14.00 67.845 min
SS 316L 0.035 max 2 max 1.00 max 0.045 max 0.030 max 16.00 – 18.00 2.00 – 3.00 10.00 – 14.00 68.89 min

Stainless Steel 316/316L Tube To Male Fittings Mechanical Properties

Grade Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
SS 316 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
SS 316L 8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 316/316L Stainless Steel Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L 1.4404 / 1.4435 S31603 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3

SS 316/316L Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 316/316L Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-07T11:20:39+05:30October 30th, 2021|Tube to Male Fittings|
Go to Top