Alloy Steel T5 Tube Manufacturers In India

We are leading Manufacturers, Supplier, Dealers, and Exporter of Alloy Steel T5 Tube in India. Our Alloy Steel T5 Tube is available in different sizes, shapes, and grades. We supply Alloy Steel T5 Tube in most of the major Indian cities in more than 20 States. We Sachiya Steel International offer different types of grades like Stainless Steel tubes, Super Duplex Steel Tubes, Duplex Steel Tubes, Carbon Steel tubes, Alloys Steel tubes, Nickel Alloys tubes, Titanium Steel tubes, Inconel Steel tubes, Aluminium tubes, etc.

Alloy Steel T5 Tube Specification

Size (Seamless)	:	6.35mm o.d to 101.60mm o.d
Standards	:	ASTM A213, ASME SA213
Equivalent Standards	:	EN 10216-2, ASTM A335, GOST 550-75, WN 1.7362, K41545
Material	:	P5, K41545
Equivalent Material	:	T5, 15Ch5M
Type	:	Seamless
Specialized in	:	Large Diameter Size
Outer Dimensions	:	6-2500mm; WT:1-200mm
Wall Thickness	:	Schedule 3mm to 15mm.
Length	:	max 1~12m
Schedule	:	STD, SCH40, SCH80
Form	:	Round, Square, Rectangular, Hydraulic Etc.
Length	:	Single Random, Double Random & Cut Length.
Tubing End	:	Plain End, Beveled End, Treaded.

Chemical Compositions of ASTM A213 / ASME SA213 T5 Alloy Steel SMLS Tubes:

C, %	Mn, %	P, %	S, %	Si, %	Cr, %	Mo, %
0.15 max	0.30-0.60	0.025 max	0.025 max	0.50 max	4.00-6.00	0.45-0.65

Mechanical Properties ASTM A213 / ASME SA213 T5 Alloy Steel SMLS Tubes:

Tensile Strength , MPa	Yield Strength, MPa	Elongation, %	Hardness, HB
415 min	205 min	30 min	163 max

Outside Diameter & Tolerance :

Hot rolled	Outside Diameter, mm	Tolerance, mm
	OD≤101.6	+0.4/-0.8
	101.6＜OD≤190.5	+0.4/-1.2
	190.5＜OD≤228.6	+0.4/-1.6
Cold Drawn	Outside Diameter, mm	Tolerance, mm
	OD＜25.4	±0.10
	25.4≤OD≤38.1	±0.15
	38.1＜OD＜50.8	±0.20
	50.8≤OD＜63.5	±0.25
	63.5≤OD＜76.2	±0.30
	76.2≤OD≤101.6	±0.38
	101.6＜OD≤190.5	+0.38/-0.64
	190.5＜OD≤228.6	+0.38/-1.14

Wall thickness & Tolerance :

Hot rolled	Outside Diameter, mm	Tolerance, %
	OD≤101.6, WT≤2.4	+40/-0
	OD≤101.6, 2.4＜WT≤3.8	+35/-0
	OD≤101.6, 3.8＜WT≤4.6	+33/-0
	OD≤101.6, WT>4.6	+28/-0
	OD>101.6, 2.4＜WT≤3.8	+35/-0
	OD>101.6, 3.8＜WT≤4.6	+33/-0
	OD>101.6, WT>4.6	+28/-0
Cold Drawn	Outside Diameter, mm	Tolerance, %
	OD≤38.1	+20/-0
	OD>38.1	+22/-0