We are leading Manufacturers, Supplier, Dealers, and Exporter of Alloy Steel T9 Tube in India. Our Alloy Steel T9 Tube is available in different sizes, shapes, and grades. We supply Alloy Steel T9 Tube in most of the major Indian cities in more than 20 States. We Sachiya Steel International offer different types of grades like Stainless Steel tubes, Super Duplex Steel Tubes, Duplex Steel Tubes, Carbon Steel tubes, Alloys Steel tubes, Nickel Alloys tubes, Titanium Steel tubes, Inconel Steel tubes, Aluminium tubes, etc.
Alloy Steel T9 Tube Specification
| Size (Seamless) | : | 6.35mm OD to 101.60mm OD |
| Standards | : | ASTM A213, ASME SA213 |
| Equivalent Standards | : | EN 10216-2, ASTM A335, GOST 550-75, S50400, WN 1.7386 |
| Material | : | T9, S50400 |
| Equivalent Material | : | P9 |
| Type | : | Seamless |
| Specialized in | : | Large Diameter Size |
| Outer Dimensions | : | 6-2500mm; WT:1-200mm |
| Wall Thickness | : | Schedule 3mm to 15mm. |
| Length | : | max 1~12m |
| Schedule | : | STD, SCH40, SCH80 |
| Form | : | Round, Square, Rectangular, Hydraulic Etc. |
| Length | : | Single Random, Double Random & Cut Length. |
| Tubing End | : | Plain End, Beveled End, Treaded. |
Chemical Compositions ASTM A213 / ASME SA213 T5 Alloy Steel SMLS Tubes
| C, % | Mn, % | P, % | S, % | Si, % | Cr, % | Mo, % |
| 0.15 max | 0.30-0.60 | 0.025 max | 0.025 max | 0.25-1.00 | 8.0-10.0 | 0.90-1.10 |
Mechanical Properties ASTM A213 / ASME SA213 T5 Alloy Steel SMLS Tubes
| Tensile Strength , MPa | Yield Strength, MPa | Elongation, % | Hardness, HB |
| 415 min | 205 min | 30 min | 179 max |
Outside Diameter & Tolerance
| Hot rolled | Outside Diameter, mm | Tolerance, mm |
| OD≤101.6 | +0.4/-0.8 | |
| 101.6＜OD≤190.5 | +0.4/-1.2 | |
| 190.5＜OD≤228.6 | +0.4/-1.6 | |
| Cold Drawn | Outside Diameter, mm | Tolerance, mm |
| OD＜25.4 | ±0.10 | |
| 25.4≤OD≤38.1 | ±0.15 | |
| 38.1＜OD＜50.8 | ±0.20 | |
| 50.8≤OD＜63.5 | ±0.25 | |
| 63.5≤OD＜76.2 | ±0.30 | |
| 76.2≤OD≤101.6 | ±0.38 | |
| 101.6＜OD≤190.5 | +0.38/-0.64 | |
| 190.5＜OD≤228.6 | +0.38/-1.14 |
Wall thickness & Tolerance
| Hot rolled | Outside Diameter, mm | Tolerance, % |
| OD≤101.6, WT≤2.4 | +40/-0 | |
| OD≤101.6, 2.4＜WT≤3.8 | +35/-0 | |
| OD≤101.6, 3.8＜WT≤4.6 | +33/-0 | |
| OD≤101.6, WT>4.6 | +28/-0 | |
| OD>101.6, 2.4＜WT≤3.8 | +35/-0 | |
| OD>101.6, 3.8＜WT≤4.6 | +33/-0 | |
| OD>101.6, WT>4.6 | +28/-0 | |
| Cold Drawn | Outside Diameter, mm | Tolerance, % |
| OD≤38.1 | +20/-0 | |
| OD>38.1 | +22/-0 |
