Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Wire, which is a low alloy pressure vessel quality steel for high temperatures. Monel K500 Wire is primarily used in welded pressure vessels where improved toughness is required. Monel K500 Welding Wire is a metal alloy consisting mostly of iron, in addition to small amounts of carbon, depending on the grade and quality of the steel. Monel K500 Coil Wire is any type of steel to which one or more elements besides carbon have been intentionally added, to produce a desired physical property or characteristic. Common elements that are added to make Monel K500 are molybdenum, manganese, nickel, silicon, boron, chromium, and vanadium.
These metals are added to produce specific properties for Monel K500 that is not found in regular carbon steel. Alloy K500 Filler Wire is normally used in the annealed temper, and strength characteristics described below are representative of annealed material. Alloy K500 should be machined by the procedures, where the usual annealing temperature is approximately 1900 Degree F (1040 Degree C).
Like other nickel alloys, Alloy K500 Coil Wire should be clean before it is heated and should be heated in a low – Sulphur atmosphere. In various types of high – temperature water, Alloy K500 Welding Wire displays low corrosion rates and excellent resistance to stress – corrosion cracking.
Monel K500 Wire Specifications |
||
| Specifications | : | ASTM B865 ASME SB865 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire, Electrode Wire, Welding Wire. |
K500 Monel Wire Chemical Composition
| Grade | C | Mn | Si | Cu | S | Cr | Fe | Ni | N |
| Monel K500 | 0.25 max | 1.50 max | 0.50 max | 27.0-33.0 | 0.10max | – | 0.5-2.0 max | 63.00 min | – |
Monel K500 Wire Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel K500 | 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 1,60,000 , MPa – 1100 | Psi – 115000 , MPa – 790 | 20% |
Equivalent Grades for K500 Monel Wire
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Monel K500 | 2.4375 | N05500 |
Monel K500 Wire Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
K500 Monel Wire Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Monel Alloy K500 Wire
Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Wire, which is a low alloy pressure vessel quality steel for high temperatures. Monel K500 Wire is primarily used in welded pressure vessels where improved toughness is required. Monel K500 Welding Wire is a metal alloy consisting mostly of iron, in addition to small amounts of carbon, depending on the grade and quality of the steel. Monel K500 Coil Wire is any type of steel to which one or more elements besides carbon have been intentionally added, to produce a desired physical property or characteristic. Common elements that are added to make Monel K500 are molybdenum, manganese, nickel, silicon, boron, chromium, and vanadium.
Product Brand: Sachiya Steel International
Product Currency: INR
Product Price: 200
Product In-Stock: InStock
5
