Aluminium Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Aluminium Screw, which is not usually used at temperatures exceeding 800 Degree F (427 Degree C) due to quick hardening and loss of corrosion resistance. When given a high temperature final solution anneal, Aluminium 6061 Hex Head Screws exhibits dramatic creep resistance. The dual stabilization prevents carbide sensitization during welding and high temperature exposure, and makes Aluminium 6082 Socket Head Cap Screws non harden able by heat treatment. A major difference in Aluminium 5083 Socket Set Screws can be attributed to the alloy addition to control hardening which results in the need for higher heat input to achieve penetration during arc welding.

Aluminium Screw

In some of the industry sectors, Aluminium 5086 Anchors Screws can be used in include Marine Industry and Shipbuilding, Oil and Gas Industry, Power Industry and Desalination plants among others. All surfaces of Aluminium 5052 Blind Rivet Screws must be ground or polished to remove any traces of oxide and surface decarburization. The parts of Aluminium 6063 Concrete Screws should then be generally considered to be weldable by the common fusion and resistance techniques.

Aluminium 7075 Threaded Screws exhibits good corrosion resistance to atmospheric corrosion, potable water, and to mildly corrosive chemical environments because of its ability to form a tightly adherent oxide film which protects their surfaces from further attack. These Aluminium 1100 Steel Shoulder Screws has exceptional resistance to a wide variety of chemical environments.

Aluminium Screw 6061, 6082, 5083, 5086, 5052 ,6063, 7075, 1100 Specifications

Specifications : ASTM B 211 ASME SB 211
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

Aluminium Screw Chemical Composition

Grade Si Fe Cu Zn Mn Mg Ti Cr Al Others(Total)
Aluminium 0.40 – 0.80 0.70 max 0.15-0.40 0.25 max 0.15 0.8-1.2 0.15 max 0.04-0.35 Balance 0.15 max

Mechanical Properties for Aluminium Screw

Temper Tensile Hardness
Ultimate Yield Elongation Brinell
KSI MPA KSI MPA %
T6, T651 45 310 21 145 25 65

Physical Property for 6082 Aluminium Screw

Physical Property Value
Density 2,70 g/cm³
Melting Point 582 °C
Thermal Expansion 23.4 x 10^-6 /K
Modulus of Elasticity 69 GPa
Thermal Conductivity 170 W/m.K
Electrical Resistivity %43 IACS

Aluminium 6061, 6082, 5083, 5086, 5052 ,6063, 7075, 1100 Screw Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

6061, 6082, 5083, 5086, 5052 ,6063, 7075, 1100 Aluminium Screw Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Aluminium Screw
Aluminium Screw Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Aluminium Screw, which is not usually used at temperatures exceeding 800 Degree F (427 Degree C) due to quick hardening and loss of corrosion resistance. When given a high temperature final solution anneal, Aluminium 6061 Hex Head Screws exhibits dramatic creep resistance. The dual stabilization prevents carbide sensitization during welding and high temperature exposure, and makes Aluminium 6082 Socket Head Cap Screws non harden able by heat treatment.

Product Brand: Sachiya Steel International Private Limited

Product Currency: INR

Product Price: 5

Price Valid Until: 2025-06-30

Product In-Stock: InStock

Editor's Rating:
5