Sachiya Steel International

class 6000 fittings

Incoloy 800 Socket Weld Fittings Manufacturers In India

Incoloy 800 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Incoloy 800 Socket Weld Fittings, which has many different industrial applications, some of which include: Industrial furnaces, Hydrocarbon cracking, Heat exchangers and Ethylene furnace quench boilers. For hot working in Incoloy 800 Forged Socket Weld Elbow Fittings, temperatures should be between 1000 Degree C and 1230 Degree C although light work may be done at temperatures as low as 850 Degree C.

To avoid possible stress relaxation grain boundary cracking of Incoloy 800H Forged Socket Weld Tee Fittings in applications above 1000 Degree F, the welded fabrication may be heated 1650 Degree F for about one hour per inch of thickness or 30 minutes minimum then air cooled. This modification of Incoloy 800HT Forged Socket Weld Cap Fittings was to control carbon and grain size to optimize stress rupture properties.

Incoloy 800 Socket Weld Fittings

Alloy 800H Forged Socket Weld Coupling Fittings is a solution heat treated (2100 Degree F / 1150 Degree C) and a controlled – carbon version of Alloy 800 Forged Socket Weld Cross Fittings with improved elevated temperature properties. Alloy 800HT Forged Socket Weld Lateral Tee Fittings is meant to fill the need for a heat – and corrosion – resistant alloy with relatively low nickel content since nickel was, at the time, designated a “strategic” metal. Alloy 800 Forged Socket Weld Union Fittings has added Carbon and annealing treatment allows for higher creep and rupture properties above 1100 Degree F (600 Degree C).

Incoloy 800 Socket Weld Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Incoloy 800/800H/800HT Forged Socket weld Fittings Chemical Composition

Grade C Mn Si Al S Cr Cu Ni Fe
Incoloy 800 0.10 max 1.50 max 1 max 0.15 – 0.60 0.015 max 19.0-23.0 0.75 max 30.0-35.0 39.5 min
Incoloy 800H 0.05 – 0.10 1.50 max 1 max 0.15 – 0.60 0.015 max 19.0-23.0 0.75 max 30.0-35.0 39.5 min
Incoloy 800HT 0.06 – 0.10 1.50 max 1 max 0.15 – 0.60 0.015 max 19.0-23.0 0.75 max 30.0-35.0 39.5 min

Alloy 800/800H/800HT Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 800/800H/800HT Incoloy Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 – X8NiCrAlTi32-21

Incoloy 800/800H/800HT Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 800/800H/800HT Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-10T17:03:03+05:30October 9th, 2021|

Inconel 718 Socket Weld Fittings Manufacturers In India

Inconel 718 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Inconel 718 Socket Weld Fittings to the clients, which is used from cryogenic temperatures up to long term service at 1200 Degree F. Inconel 718 Forged Socket Weld Elbow has an excellent creep – rupture strength at temperatures up to 700 Degree C (1300 Degree F). Inconel 718 Forged Socket Weld Tee is age harden able and may be welded in fully aged condition, along with having excellent oxidation resistance up to 1800 degrees F (980 degrees C).

Also known as “heat – resistant super – alloys” or “high – temperature alloys”, Inconel 718 Forged Socket Weld Cap can withstand severe mechanical stresses and strains in extreme environments while remaining stable, corrosion and creep resistant. It has been used for jet engine and high – speed airframe parts such as wheels, spacers, buckets, and Inconel 718 Forged Socket Weld Coupling temperature bolts and fasteners. The welding characteristics of Inconel 718 Forged Socket Weld Cross, especially its resistance to post – weld cracking, are outstanding.

Inconel 718 Socket Weld Fittings

Inconel 718 Forged Socket Weld Union is a nickel – based super alloy that is well suited for applications requiring high strength in temperature ranges from cryogenic up to 1400 Degree F. Inconel 718 Forged Socket Weld Plug is a precipitation – hardening nickel – chromium alloy containing significant amounts of iron, columbium, and molybdenum, along with lesser amounts of aluminum and titanium.

Inconel 718 Socket weld Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Inconel 718 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr Cu Ni Fe
Inconel 718 0.08 max 0.35 max 0.35 max – 0.015 max 17 – 21 0.30 max 50.0-55.0 –

Alloy 718 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.2 g/cm3 1350 °C (2460 °F) Psi –1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482 45 %

Equivalent Grades for 718 Inconel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 718 2.4668 N07718

Inconel 718 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 718 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-26T15:49:06+05:30October 8th, 2021|

Inconel 625 Socket Weld Fittings Manufacturers In India

Inconel 625 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Inconel 625 Socket Weld Fittings, which has excellent mechanical properties at both extremely low and extremely high temperatures. Because of this, the uses of these Inconel 625 Forged Socket Weld Elbow have expanded into a wide range of industries such as the chemical processing industry, and for marine and nuclear applications to make pumps and valves and other high pressure equipment.

Our Inconel 625 Forged Socket Weld Tee is used as wire rope for mooring cables, propeller blades for motor patrol gunboats, submarine quick – disconnect fittings, submarine auxiliary propulsion motors, etc. These Inconel 625 Forged Socket Weld Cap has withstood many corrosive environments and also has excellent weldability and is frequently used to weld AL-6XN. Our Inconel 625 Forged Socket Weld Coupling is good for sea water applications and has outstanding resistance to chloride pitting and crevice corrosion cracking.

Inconel 625 Socket Weld Fittings

These Inconel 625 Forged Socket Weld Cross has exceptional fatigue resistance, therefore, precipitation – hardening treatments are not required. Because of its resistance to corrosion, pressure and heat, our Inconel 625 Forged Socket Weld Tee is ideal for applications in the power industry, chemical processing components, aerospace, marine and hardware industries. These Inconel 625 Forged Socket Weld Lateral Tee is a Ni – Cr – Mo alloy that is used for its high strength, high toughness, and its oxidation and corrosion resistance.

Inconel 625 Socket weld Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Inconel 625 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr Cu Ni Fe
Inconel 625 0.10 max 0.50 max 0.5 max – 0.015 max 20.0 – 23.0 – 58 min 5.0 max

Alloy 625 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.4 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 517 42.5 %

Equivalent Grades for 625 Inconel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 625 2.4856 N06625 NCF 625 NA 21 ХН75МБТЮ NC22DNB4M NiCr22Mo9Nb

Inconel 625 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 625 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-27T19:18:24+05:30October 8th, 2021|

Inconel 601 Socket Weld Fittings Manufacturers In India

Inconel 601 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Inconel 601 Socket Weld Fittings, which have high temperature static applications. Inconel 601 Forged Socket Weld Elbow is not embrittled by long exposure to high temperatures, thanks to the nickel, chromium and aluminum contents that together form a protective and adherent oxide film. Oxidation resistance of Inconel 601 Forged Socket Weld Tee is further enhanced by the aluminum content. The properties of Inconel 601 Forged Socket Weld Cap make it a material of broad utility in fields like thermal processing, pollution control, chemical processing, power generation and aerospace.

The nickel base of Inconel 601 Forged Socket Weld Coupling, in conjunction with substantial chromium content, provides resistance to many corrosive media and high – temperature environments. Inconel 601 Forged Socket Weld Cross has good aqueous corrosion resistance and outstanding mechanical strength. Inconel 601 Forged Socket Weld Lateral Tee can be used at very high temperatures and mechanical stress, and also where high surface stability is required.

Inconel 601 Socket Weld Fittings

Inconel 601 Forged Socket Weld Union has good high temperature strength, and retains its ductility after long service exposure. Inconel 601 Forged Socket Weld Plug is often used in gas – turbine components, petrochemical and other process equipment. These Inconel 601 Forged SW Cap also has high strength and good workability with excellent metallurgical stability and a high resistance to carburization.

Inconel 601 Socket weld Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Inconel 601 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cu Cr Ni Fe
Inconel 601 0.10 max 1 max 0.5 max – 0.015 max 1.0 max 21.0-25.0 58.0-63.0 Balance

Alloy 601 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 601 Inconel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe

Inconel 601 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 601 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-07T12:54:48+05:30October 7th, 2021|

Inconel 600 Socket Weld Fittings Manufacturers In India

Inconel 600 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Inconel 600 Socket Weld Fittings, which displays good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range. The high nickel content of Inconel 600 Forged Socket Weld Elbow enables it to retain considerable resistance under reducing conditions and makes it resistant to corrosion by a number of organic and inorganic compounds. Inconel 600 Forged Socket Weld Tee is often used in carburizing atmospheres, barge liners, tank truck liners, ethylene dichloride crackers, and so on.

Inconel 600 Forged Socket Weld Cap is also used in Food Processing and Nuclear Engineering applications. Inconel 600 Forged Socket Weld Coupling is a nickel – chromium – iron and solid solution strengthened alloy used for applications that require corrosion and high temperature resistance. Inconel 600 Forged Socket Weld Cross is a nickel – chromium alloy with good oxidation resistance at high temperatures and resistance to chloride – ion stress – corrosion cracking, corrosion by high – purity water, and caustic corrosion.

Inconel 600 Socket Weld Fittings

Inconel 600 Forged Socket Weld Lateral Tee also has excellent mechanical properties and presents the desirable combination of high strength and good workability. Inconel 600 Forged Socket Weld Union was designed for service temperatures from cryogenic to elevated temperatures in the range of 2000 Degree F. Inconel 600 Forged Socket Weld Plug is a nickel – base alloy with excellent carburization, and good oxidation resistance at elevated temperatures.

Inconel 600 Socket weld Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Inconel 600 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr Cu Ni Fe
Inconel 600 0.15 max 1 max 0.5 max – 0.015 max 14 – 17 0.50 max 72 min 6.0-10.0

Alloy 600 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %

Equivalent Grades for 600 Inconel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 600 2.4816 N06600 NCF 600 NA 13 МНЖМц 28-2,5-1,5 NC15FE11M NiCr15Fe

Inconel 600 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 600 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-08T13:08:19+05:30October 7th, 2021|

AISI 4130 Socket Weld Fittings Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality AISI 4130 Socket Weld Fittings that are performance based and are extremely well – organized in nature. These AISI 4130 Forged Socket Weld Elbow Fittings is an austenitic alloy considered for moderate to elevated corrosion resistance. Our AISI 4130 Forged Socket Weld Tee Fittings is low carbon soaring alloy austenitic steel that is extensively used in applications where the corrosion features of Stainless Steel 317L and Stainless Steel 316L are not sufficient.

These AISI 4130 Forged Socket Weld Cap Fittings has been use proved more than a lot of years and was formerly industrialized to repel corrosion in diluted sulfuric acid. Meanwhile, these AISI 4130 Forged Socket Weld Cross Fittings are as well being offered in different sizes and shapes to our customers. Sachiya Steel International is one of the pioneer distributors & stockiest in these AISI 4130 Forged Socket Weld Coupling Fittings, which is available in different specifications and designs to our customers, along with in made – to – order options.

Exceptions of our AISI 4130 Forged Socket Weld Union Fittings are nitride parts, which have better wear resistance than would be expected from the carbon content alone. Fully hardened – and – tempered, these AISI 4130 Forged Socket Weld Plug Fittings have a good combination of strength and toughness, both at room temperature and low temperature.

AISI 4130 Socket weld Fittings Specifications
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

AISI 4130 Forged Socket weld Fittings Chemical Composition

Grade Ni C Mo Mn Si Fe Cu S P Cr
AISI 4130 0.50 max 0.28-0.33 0.15-0.25 0.40-0.60 0.15-0.35 97.3-98.22 – 0.025 MAX 0.035 max 0.80-1.10

AISI 4130 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.85 g/cm3 1432 ℃ 560 460  21.50 %

Equivalent Grades for 4130 AISI Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS SIS BS EN
AISI 4130 1.7218 G41300 JIS G4105 BS 970 25CrMo4

AISI 4130 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

AISI 4130 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-10-28T16:39:53+05:30October 6th, 2021|

SMO 254 Socket Weld Fittings Manufacturers In India

SMO 254 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality SMO 254 Socket Weld Fittings, which is an austenite steel. SMO 254 Forged Socket Weld Elbow Fittings offered feature high finish strength in comparison to 316L and 317L austenitic stainless steel as well as superior ductility and impact strength. Further, SMO 254 Forged Socket Weld Tee Fittings also come with higher resistance to abrasion, erosion as well as resistance to crevice corrosion in seawater. Even highly alloyed stainless steels such as SMO 254 Forged Socket Weld Cap Fittings have limited applicability in environments which have halide ions, e.g. chloride, bromide and fluoride solutions.

It is for this reason that SMO 254 Forged Socket Weld Coupling Fittings has often been necessary to use such expensive materials such as nickel based alloys or titanium for these environments.  SMO 254 Forged Socket Weld Cross Fittings was developed with a view of offering a less expensive alternative to the conventional pricier alloys. With its high nitrogen content SMO 254 Forged Socket Weld Union Fittings has higher mechanical strength than most other austenitic stainless steels.

SMO 254 Socket Weld Fittings

Similar to these, SMO 254 Forged Socket Weld Plug Fittings is characterized by high ductility and impact strength as well as good weldability. Some of the other properties of SMO 254 Forged Socket Weld Lateral Tee Fittings include high resistance to stress corrosion cracking, good resistance to erosion corrosion, low magnetic permeability and others.

SMO 254 Socket weld Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

SMO 254 Forged Socket weld Fittings Chemical Composition

Grade Ni Cr Mo Cu N C Mn Si P S
SMO 254 17.5-18.5 19.5-20.5  6-6.5 0.5-1 0.18-0.22 0.02 1 .08 0.03 0.01

SMO 254 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
 8.0 g/cm3 1320-1390 ℃ 650 300  35 %

Equivalent Grades for 254 SMO Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS SIS AFNOR EN
SMO 254 1.4547 S31254 2378 Z1 CNDU 20.18.06Az X1CrNiMoCuN20-18-7

SMO 254 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SMO 254 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-10T19:15:51+05:30October 6th, 2021|

Alloy 20 Socket Weld Fittings Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy 20 Socket Weld Fittings, where the alloying elements tend to form either solid solutions or compounds or carbides. Alloying elements in our Alloy 20 Forged Socket Weld Elbow Fittings as well have an effect on the eutectoid temperature of the steel. Manganese and nickel in these Alloy 20 Forged Socket Weld Tee Fittings lower the eutectoid temperature and are known as austenite stabilizing elements. With enough of these elements, the austenitic structure of our Alloy 20 Forged Socket Weld Cross Fittings may be obtained at room temperature.

Carbide – forming elements raise the eutectoid temperature in these Alloy 20 Forged Socket Weld Cap Fittings, where these elements are as well-known as ferrite stabilizing elements. Deposition of complex and heavy organic compounds in our Alloy 20 Forged Socket Weld Union Fittings in crude and heavy oil can cause a number of severe problems up to pipeline blocking.

These Alloy 20 Forged Socket Weld Plug Fittings are developed for energy – related applications involving oil & gas drilling and as a result are subjected to stresses in machine parts. Further, our Alloy 20 Forged Socket Weld Lateral Tee Fittings is also used in domestic, professional or industrial areas. This specification covers nominal wall and minimum wall seamless ferrite these Alloy 20 Forged SW Cap Fittings intended for high temperature service.

Alloy 20 Socket weld Fittings Specifications
Specifications : ASTM B462 & ASME B462
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Alloy 20 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si S Cu Ni Cr Fe Mo P
Alloy 20  0.07 max  2.00 max 1.00 max 0.035 max 3.0-4.0  32.0-38.0 19.0-21.0  29.85 min*  2.0-3.0  0.045 max

Alloy 20 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
 8.1 g/cm3  1443 °C (2430 °F) Psi -80,000, MPa -551 Psi – 35,000, MPa – 241 30%

Equivalent Grades for Alloy 20 Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS AFNOR EN
Alloy 20  2.4660  N08020  Z2NCUD31-20AZ  NiCr20CuMo

Alloy 20 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 20 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-11-06T17:56:39+05:30October 5th, 2021|

Stainless Steel 904L Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality for Stainless Steel 904L Socket Weld Fittings, which is available at best prices to our clients. Stainless Steel 904L Forged Socket Weld Elbow is less resistant to nitric acid than grades 304L and 310L, which are free of molybdenum. Stainless Steel 904L Forged Socket Weld Tee offer good oxidation resistance, where most common fusion and resistance methods may be employed. However, the structural stability of Stainless Steel 904L Forged Socket Weld Cap collapses at high temperatures, particularly above 400 Degree C.

Stainless Steel 904L Forged Socket Weld Coupling can be solution heat – treated at 1090 Degree C to 1175 Degree C, following by rapid cooling, where thermal treatment is suitable for hardening these grades. Stainless Steel 904L Forged Socket Weld Cross needs to be solution treated following cold working, to achieve maximum stress corrosion cracking resistance under critical environments. Welding of Stainless Steel 904L Forged Socket Weld Union can be performed using all conventional methods, which further does not require pre – heat and post – weld heat treatments.

Stainless Steel 904L Forged Socket Weld Plug can be subjected to hot cracking in constrained weldment, which further can be readily bent to a small radius under cold conditions. Full annealing of Stainless Steel 904L Forged Socket Weld Lateral Tee should follow any hot work to re – attain maximum ductility and corrosion resistance.

Stainless Steel 904L Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

SS 904L Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr Mo N Cu
SS 904L 0.20 max 2 max 1.00 max 0.045 max 0.035 max 19 – 23 4.00-5.00 0.10-0.25 1.0-2.0

Stainless Steel 904L Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1390℃ MPa – 490  MPa – 220 35 %

Equivalent Grades for 904L Stainless Steel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS KS AFNOR EN
SS 904L 1.4539 N08904 SUS 890L 904S13 STS 317J5L Z2 NCDU 25-20 X1NiCrMoCu25-20-5

Stainless Steel 904L Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 904L Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-21T13:01:54+05:30October 5th, 2021|

Stainless Steel 446 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Stainless Steel 446 Socket Weld Fittings, which has general corrosion resistance similar to the low carbon 304 / 304L. These Stainless Steel 446 Forged Socket Weld Elbow is available in the annealed condition, which is also called the solution heat treat condition. Solution treatment of our Stainless Steel 446 Forged Socket Weld Tee is done from 1675 Degree F – 1725 Degree F for 15 minutes to 30 minutes at temperature.

Air cool or oil quenches these Stainless Steel 446 Forged Socket Weld Cap, to below 60 Degree F to effect complete transformation to martensite. Aging of our Stainless Steel 446 Forged Socket Weld Coupling is normally carried out from 950 Degree F – 1150 Degree F, depending on the desired final properties, where heat treatment is usually performed in air. Heat treatment of brazed components may be done in inert atmospheres of this Stainless Steel 446 Forged Socket Weld Cross, where reducing atmospheres should not be used because of the potential for nitrogen contamination.

Our Stainless Steel 446 Forged Socket Weld Union is used as a material of construction up to 1500 Degree F, where slight scaling begins at about 1200 Degree F. However, these Stainless Steel 446 Forged Socket Weld plug is subject to carbide precipitation in the heat affected zone (HAZ) of welds.

Stainless Steel 446 Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

SS 446 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr Mo N Fe
SS 446 0.2 max 1.5 max 0.75 max 0.045 max 0.030 max 11.5 – 23 – 0.10-0.25 –

Stainless Steel 446 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.5 g/cm3 1510 °C (2750 °F) Psi – 75000 , MPa – 485 Psi – 40000 , MPa – 275 20 %

Equivalent Grades for 446 Stainless Steel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 446 1.4762/3 S44600 SUS 446 – – – –

Stainless Steel 446 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 446 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-22T17:10:27+05:30October 4th, 2021|

SACHIYA STEEL INTERNATIONAL

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top