Sachiya Steel International

class 6000 fittings

Brass Socket Weld Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of high quality Brass Socket Weld Fittings, where too little carbon content leaves (pure) iron quite soft, ductile, and weak. Brass Socket Weld Elbow Fittings is also distinguishable from wrought iron (now largely obsolete), which may contain a small amount of carbon but large amounts of slag. Carbon contents higher than those of Brass Socket Weld Tee Fittings make an alloy, commonly called pig iron that is brittle (not malleable).

While iron alloyed with carbon is called carbon steel, Brass Socket Weld Cap Fittings is steel to which other alloying elements have been intentionally added to modify the characteristics of steel. Common alloying elements of Brass Socket Weld Coupling Fittings include: manganese, nickel, chromium, molybdenum, boron, titanium, vanadium, tungsten, cobalt, and niobium.

Brass Socket Weld Fittings Manufacturer In India | Brass Socket Weld Fittings Manufacturer In Mumbai | Brass Socket Weld Fittings Exporter In India| Brass Socket Weld Fittings Exporter In Mumbai| Brass Socket Weld Fittings Supplier In India| Brass Socket Weld Fittings Supplier In Mumbai | Brass Socket Weld Fittings Stockist In India | Brass Socket Weld Fittings Stockist In Mumbai

Additional elements are also important in Brass Socket Weld Cross Fittings: phosphorus, Sulphur, silicon, and traces of oxygen, nitrogen, and copper, that are most frequently considered undesirable. With modern steelmaking techniques such as powder metal forming in Brass Socket Weld Union Fittings, it is possible to make very high – carbon (and other alloy material) steels, but such are not common. Brass Socket Weld Plug Fittings is not malleable even when hot, but it can be formed by casting as it has a lower melting point than steel and good castability properties.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Brass Socket weld Fittings Specifications
Specifications : ASTM B62 & ASME B62
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.15, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Brass Socket Weld Fitting Chemical Composition
Brass Cu Fe Pb Zn
Min./Max. 60.0-63.0 0.35 2.5-3.0 Rem.
Nominal 61.5 – 2.7 35.4
Brass Socket Weld Fitting Physical Properties
Properties US Customary
Melting Point -Liquidus 1650 F
Melting Point -Solidus 1630 F
Density 0.307 lb/in3at 68 F
Electrical Resistivity 39.90 ohms – cmil/ft @ 68 F
Electrical Conductivity 26 %IACS @ 68 F
Thermal Conductivity 67 Btu · ft/(hr · ft2·oF)at 68F
Modulas of Elasticity in Tension 14000 ksi
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Brass Forged Socket weld Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Brass Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Brass Socket Weld Fittings
Brass Socket Weld Fittings Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of high quality Brass Socket Weld Fittings, where too little carbon content leaves (pure) iron quite soft, ductile, and weak.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-10-27T10:33:35+05:30October 27th, 2021|

SMO 254 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality SMO 254 Socket Weld Fittings, which is an austenite steel. SMO 254 Forged Socket Weld Elbow Fittings offered feature high finish strength in comparison to 316L and 317L austenitic stainless steel as well as superior ductility and impact strength. Further, SMO 254 Forged Socket Weld Tee Fittings also come with higher resistance to abrasion, erosion as well as resistance to crevice corrosion in seawater. Even highly alloyed stainless steels such as SMO 254 Forged Socket Weld Cap Fittings have limited applicability in environments which have halide ions, e.g. chloride, bromide and fluoride solutions.

SMO 254 Socket Weld Fittings

It is for this reason that SMO 254 Forged Socket Weld Coupling Fittings has often been necessary to use such expensive materials such as nickel based alloys or titanium for these environments.  SMO 254 Forged Socket Weld Cross Fittings was developed with a view of offering a less expensive alternative to the conventional pricier alloys. With its high nitrogen content SMO 254 Forged Socket Weld Union Fittings has higher mechanical strength than most other austenitic stainless steels.

Similar to these, SMO 254 Forged Socket Weld Plug Fittings is characterized by high ductility and impact strength as well as good weldability. Some of the other properties of SMO 254 Forged Socket Weld Lateral Tee Fittings include high resistance to stress corrosion cracking, good resistance to erosion corrosion, low magnetic permeability and others.

SMO 254 Socket weld Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

SMO 254 Forged Socket weld Fittings Chemical Composition

Grade Ni Cr Mo Cu N C Mn Si P S
SMO 254 17.5-18.5 19.5-20.5  6-6.5 0.5-1 0.18-0.22 0.02 1 .08 0.03 0.01

SMO 254 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
 8.0 g/cm3 1320-1390 ℃ 650 300  35 %

Equivalent Grades for 254 SMO Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS SIS AFNOR EN
SMO 254 1.4547 S31254 2378 Z1 CNDU 20.18.06Az X1CrNiMoCuN20-18-7

SMO 254 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SMO 254 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-07T11:23:59+05:30October 26th, 2021|Socket Weld Fittings|

Copper Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Copper Socket Weld Fittings, which are precisely – engineered by our experts using high quality steel, which are in fact made from the reliable experts of the market. We are one of the topmost known trusted names in market that offer these Copper Socket Weld Elbow Fittings, where we have been able to meet varied requirements of patrons in prompt manner. The Air Conditioning Copper Socket Weld Tee Fittings that we manufacture are extensively used in Air conditioning systems. We are passionately engaged in offering an extensive range of these Copper Socket Weld Cap Fittings, which are manufactured from optimum quality material in complete compliance with international quality standards.

Copper Socket Weld Fittings

According to the requirements of our customers, we are involved in offering a fine quality Copper Socket Weld Coupling Fittings. Having vast experience in this domain, we are engaged in offering these elegantly designed Copper Socket Weld Cross Fittings in the market. Our Copper Socket Weld Union Fittings are often used for Writing Instrument, CNG / LPG Kit Industries, Water Lines, Plumbing & Home Application office Accessories & etc.

These Copper Socket Weld Plug Fittings are also used for Sanitation, Hot and Cold Water, Industrial & Medical Gas Transportation, Various Engineering, where further we are also engaged in providing HVAC Installation Work and Ducting Work to our valuable clients.

Copper Socket weld Fittings Specifications
Specifications : ASTM B62 & ASME B62
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.15, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Copper Forged Socket weld Fittings Chemical Composition

Standard Copper NO. Chemical Composition Mechanical Properties
CU% P% Temper Tensile strength (Mpa) Elongation (%) Average Grain Size (mm)
ASTM
B280/68		 C12200 >99.9 0.015 to 0.040 >60 >205 >40 >0.040
>50 >245

Copper Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Copper Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-07T11:26:41+05:30October 26th, 2021|Socket Weld Fittings|

Titanium Grade 5 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality of Titanium Grade 5 Socket Weld Fittings, where we provide these products to our valuable clienteles in different specifications at industry – leading prices. Titanium Grade 5 Forged Socket Weld Elbow Fittings has outstanding resistance to corrosion in seawater making it an exceptional select for use in subsea oil & gas and offshore processes where seawater weight and corrosion are concerns. Titanium Grade 5 Forged Socket Weld Tee Fittings is age harden able by heat action to attain even greater powers. Titanium Grade 5 Forged Socket Weld Cap Fittings is used in medical, aerospace, and other uses where reasonable strength, good potency to weight, and promising corrosion features are essential.

Titanium Grade 5 Forged Socket Weld Cross Fittings also has some best features to offer such as precise dimensions, easy to fit, rust proof and more. Meanwhile, Titanium Grade 5 Forged Socket Weld Coupling Fittings are also being offered in different sizes and shapes to our customers. Titanium Grade 5 Forged Socket Weld Union Fittings is the common name for a number of different alloys used in corrosive environments.

Titanium Grade 5 Socket Weld Fittings

Titanium Grade 5 Forged Socket Weld Plug Fittings is used to keep food surfaces and medical devices safe of microbes as it is self-repairing with its chromium oxide film. Our knowledgeable staff and resident metallurgists will be pleased to assist you further on any technical issue related to Titanium Grade 5 Forged Socket Weld Lateral Tee Fittings.

Titanium Grade 5 Forged Socket weld Fittings Specifications
Specifications : ASTM B381 & ASME B381
Size : 1/8” NB to 4” NB
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Titanium Gr.5 Forged Socket weld Fittings Chemical Composition

Grade Ti C Fe H N O Al V
Titanium Gr.5 90 min – 0.25 max – –  0.2 max 6 min 4 min

Titanium Grade 5 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 %

Equivalent Grades for Gr.5 Titanium Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Titanium Gr.5 3.7165 R56400 – – – – –

Titanium Grade 5 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Titanium Grade 5 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-19T12:05:42+05:30October 25th, 2021|

Titanium Grade 2 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Titanium Grade 2 Socket Weld Fittings, where our engineers hire cutting – edge technology in the manufacture procedure to make these products. As a single – stage material, features of Titanium Grade 2 Forged Socket Weld Elbow Fittings are measured by chemistry (interstitial contamination and iron elements) and grain size. Linked to the other grades of commercially untainted titanium, Titanium Grade 2 Forged Socket Weld Tee Fittings is feebler than Grade 3 to some extent, but sturdier than Grade 1 and similarly resistant to corrosion.

Titanium Grade 2 Forged Socket Weld Cap Fittings is generally used in Marine and Chemical applications, Aerospace industry, Medical industry, Electroplating industry, etc. Meanwhile, Titanium Grade 2 Forged Socket Weld Coupling Fittings are also being offered in different sizes and shapes to our customers.

Titanium Grade 2 Socket Weld Fittings

The parts of Titanium Grade 2 Forged Socket Weld Union Fittings have good strength – to – weight ratio, corrosion resistance and ductility. Parts built with Titanium Grade 2 Forged Socket Weld Plug Fittings can be machined, shot – peened and polished in as – built and heat treated states. These Titanium Grade 2 Forged Socket Weld Cross Fittings is widely used in heat exchangers; where despite the low thermal conductivity of titanium the efficiency of heat transfer is high due to good strength, high resistance to erosion corrosion and the fouling resistance of the hard, smooth surface.

Titanium Grade 2 Forged Socket weld Fittings Specifications
Specifications : ASTM B381 & ASME B381
Size : 1/8” NB to 4” NB
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Titanium Gr.2 Forged Socket weld Fittings Chemical Composition

Grade Ti C Fe H N O Al V
Titanium Gr.2 99.2 min 0.1 max 0.3 max  0.015 max  0.03 max  0.25 max – –

Titanium Grade 2 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
4.5 g/cm3 1665 °C (3030 °F) Psi – 49900 , MPa – 344 Psi – 39900 , MPa – 275 20 %

Equivalent Grades for Gr.2 Titanium Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Titanium Gr.2 3.7035 R50400 – – – – –

Titanium Grade 2 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Titanium Grade 2 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-20T15:23:20+05:30October 23rd, 2021|

Super Duplex S32750 Socket Weld Fittings Manufacturers In India

Super Duplex S32750 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Super Duplex S32750 Socket Weld Fittings, where the corrosively of such solutions is affected by acidity and chloride content. In aqueous solutions containing hydrogen sulphide and chlorides, stress corrosion cracking can also occur on Super Duplex S32750 Forged Socket Weld Elbow Fittings at temperatures below 60 Degree C (140 Degree F). In direct contrast to the case with ordinary chloride – induced stress corrosion cracking, ferritic stainless steels such as Super Duplex S32760 Forged Socket Weld Tee Fittings are more sensitive to this type of stress corrosion cracking than austenitic steels.

In accordance with solution annealed and liquid quenched wrought Super Duplex S32750 Forged Socket Weld Cap Fittings are suitable for use at temperatures up to 450 Degree F (232 Degree C) in sour environments in oil and gas production, if the partial pressure of hydrogen sulphide does not exceed.

Hydrogen Induced Stress Cracking (HISC) in Super Duplex S32760 Forged Socket Weld Coupling Fittings is an embrittlement phenomenon which may occur in catholically protected subsea steel constructions in the presence of high tensile stresses. When connected to catholically protected carbon steels, Super Duplex S32750 Forged Socket Weld Cross Fittings will also be catholically protected even though this is not necessary. The low, ambient, and elevated temperature are mechanical properties of Super Duplex S32760 Forged Socket Weld Union Fittings.

Super Duplex S32750/S32760 Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings
Grades : S32750 / S32760/ S32950 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61

Super Duplex S32750 Socket Weld Fittings

 

Super Duplex S32750/S32760 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N Cu
S32750/S32760 0.030max  1.20 max 0.80 max 0.035max 0.020 max 24.0-26.0  3.0-5.0  6.0-8.0 0.24/0.32 0.50

Super Duplex S32750/S32760 Socket weld Fitting Mechanical Properties

Grades Density (g/cm 3) Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
S32750 / S32760 7.8 g/cm3 1350 °C (2460 °F) Psi – 80000 , MPa – 550 Psi – 116000 , MPa – 800 15%

Equivalent Grades for Super Duplex S32750/S32760 Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS
Super Duplex S32750/S32760 1.4410 S32750/S32760

Super Duplex S32750/S32760 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Super Duplex S32750/S32760 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-21T16:24:27+05:30October 23rd, 2021|

Duplex S31803 Socket Weld Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Duplex S31803 Socket Weld Fittings, which is available at reasonable price for our esteemed clients. Chloride stress corrosion cracking of Duplex S31803 Forged Socket Weld Elbow Fittings can occur when the necessary conditions of temperature, tensile stress, oxygen, and chlorides are present. Because these conditions in Duplex S32205 Forged Socket Weld Tee Fittings are not easily controlled and are often characteristic of the operating environment, SCC has sometimes been a barrier to the use of stainless steels.

Duplex S31803 Forged Socket Weld Cap Fittings are especially susceptible to SCC, and even Type 317L is not resistant. However, the duplex nature of Duplex S32205 Forged Socket Weld Coupling Fittings imparts an excellent resistance to SCC. Duplex S31803 Forged Socket Weld Cross Fittings resists SCC in two sodium chloride-containing environments that provide meaningful results relating to many practical service applications. As with most austenitic stainless steels, these Duplex S32205 Forged Socket Weld Union Fittings will not resist boiling 42 % magnesium chloride, but this environment is rarely encountered in service.

Duplex S31803 Socket Weld Fittings Manufacturer In India | Duplex S31803 Socket Weld Fittings Exporter In India | Duplex S31803 Socket Weld Fittings Manufacturer In Mumbai | Duplex S31803 Socket Weld Fittings Exporter In Mumbai | Duplex S31803 Socket Weld Fittings Supplier In Mumbai | Duplex S31803 Socket Weld Fittings Supplier In India | Duplex S31803 Socket Weld Fittings Stockist

The boiling magnesium chloride test results indicate only that Duplex S31803 Forged Socket Weld Plug Fittings can be susceptible to SCC in certain specific environments. Austenite favours resistance and these Duplex Steel S32205 Forged Socket Weld Lateral Tee Fittings is usually superior to the martensitic and ferritic stainless steels.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Duplex S31803/S32205 Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings
Grades : S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Duplex S31803/S32205 Forged Socket weld Fittings Chemical Composition
Grade C Mn Si P S Cr Mo Ni N Fe
Duplex S31803 0.030max  2.00 max 1.00 max 0.030max 0.020 max 22.0-23.0  3.0-3.5  4.50-6.50 0.14-0.20  63.72 min
Duplex S32205 0.030max  2.00 max 1.00 max 0.030max 0.020 max 21.0-23.0 2.50-3.50  4.50-6.50 0.08-0.20  63.54 min
Duplex S31803/S32205 Socket weld Fitting Mechanical Properties
Grades Density (g/cm 3) Density (lb/in 3) Melting Point (°C) Melting Point (°F)
S31803 / S32205 7.805 0.285 1420 – 1465 2588 – 2669
Equivalent Grades for Duplex S31803/S32205 Forged Socket weld Fittings
STANDARD WERKSTOFF NR. UNS
Duplex S31803/S32205 1.4462 S31803/S32205
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Duplex S31803/S32205 Forged Socket weld Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Duplex S31803/S32205 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Duplex S31803 Socket Weld Fittings
Duplex S31803 Socket Weld Fittings Manufacturer 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Duplex S31803 Socket Weld Fittings, which is available at reasonable price for our esteemed clients.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-10-22T10:40:29+05:30October 22nd, 2021|

Nickel Alloy 201 Socket Weld Fittings Manufacturers In India

Nickel Alloy 201 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Nickel Alloy 201 Socket Weld Fittings, which is a silvery – white metal with a slight golden tinge that takes a high polish. Nickel 201 Forged Socket Weld Elbow is slowly oxidized by air at room temperature and is considered corrosion – resistant. Historically, Nickel 201 Forged Socket Weld Tee has been used for plating iron and brass, coating chemistry equipment, and manufacturing certain alloys that retain a high silvery polish, such as German silver.

About 6 % of world production of Nickel 201 Forged Socket Weld Cap is still used for corrosion – resistant pure – nickel plating, where these nickel – plated objects sometimes provoke nickel allergy. Nickel 201 Forged Socket Weld Coupling, has been widely used in coins, though its rising price has led to some replacement with cheaper metals in recent years.

Nickel 201 Forged Socket Weld Cross is one of four elements (iron, cobalt, nickel, and gadolinium) that are ferromagnetic at approximately room temperature. Alnico permanent magnets based partly on Nickel 201 Forged Socket Weld Tee are of intermediate strength between iron-based permanent magnets and rare – earth magnets. Nickel 201 Forged Socket Weld Union is valuable in modern times chiefly in alloys, where about maximum percentage of world production is used in nickel – steels (particularly stainless steel).

Nickel Alloy 201 Socket Weld Fittings

Nickel Alloy 201 Socket Weld Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Nickel Alloy 201 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cu Mo Ni Fe
Nickel 201 0.02 max 0.35 max 0.35 max – 0.01 max 0.25 max – 99.00 min 0.40 max

Nickel Alloy 201 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 201 Nickel Alloy Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 – LC-Ni 99

Nickel 201 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel Alloy 201 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-13T14:54:03+05:30October 20th, 2021|

Nickel Alloy 200 Socket Weld Fittings Manufacturers In India

Nickel Alloy 200 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Nickel Alloy 200 Socket Weld Fittings, which has outstanding resistance to hydrochloric acid at all concentrations and temperatures. Furthermore, Nickel 200 Forged Socket Weld Elbow has greatly improved structural stability compared with other type alloys, leading to fewer concerns during welding, fabrication, and service. Nickel 200 Forged Socket Weld Tee is a nickel – molybdenum alloy with excellent resistance to pitting, corrosion, and stress – corrosion cracking plus, thermal stability superior to that of alloy.

Nickel Alloy 200 Socket Weld Fittings

Nickel 200 Forged Socket Weld Cap is applicable in aircraft, furnace and chemical process components, honeycombs and gas turbine combustion section components. Nickel 200 Forged Socket Weld Coupling also withstands sulphuric, acetic, formic and phosphoric acids and other non – oxidizing media. Nickel 200 Forged Socket Weld Cross has a special chemistry designed to achieve a level of thermal stability greatly superior to that of its predecessors.

Nickel 200 Forged Socket Weld Union has been primarily used for their resistance to corrosion in non – oxidizing environments such as HCl. Nickel 200 Forged Socket Weld Plug is an additional member of the Ni – Mo – family of alloys with a special chemistry designed. Nickel 200 Forged Socket Weld Lateral Tee belongs to the family of nickel – molybdenum alloys and has an average composition of 65 % nickel and 30 % molybdenum.

Nickel Alloy 200 Socket Weld Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Nickel Alloy 200 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cu Mo Ni Fe
Nickel 200 0.15 max 0.35 max 0.35 max – 0.01 max 0.25 max – 99.00 min 0.40 max

Nickel Alloy 200 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 200 Nickel Alloy Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2

Nickel 200 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel Alloy 200 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-13T17:42:06+05:30October 20th, 2021|

Monel Alloy K500 Socket Weld Fittings Manufacturers In India

Monel Alloy K500 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Monel Alloy K500 Socket Weld Fittings, which is tailor – made as per the customer’s specification and end application. Monel K500 Forged Socket Weld Elbow is that is alloyed with a variety of elements in total amounts between 1.0 % and 50 % by weight to improve its mechanical properties. Monel K500 Forged Socket Weld Tee are trusted for their various salient features like corrosion resistance, durability and high tensile strength.

Monel K500 Forged Socket Weld Lateral Tee also contains niobium for stabilization against sensitization and resultants inter – granular corrosion. Strictly speaking, the simplest Monel K500 Forged Socket Weld Cap are iron (Fe) alloyed with carbon (C) (about 0.1 % to 1 %, depending on type). Monel K500 Forged Socket Weld Coupling is a metal alloy consisting mostly of iron, in addition to small amounts of carbon, depending on the grade and quality of the steel.

Monel K500 Forged Socket Weld Cross are made by combining carbon steel with one or several alloying elements, such as manganese, silicon, nickel, titanium, copper, chromium and Aluminium. The process of making Monel K500 Forged Socket Weld Union is highly specialized and complex. Inconel contain specified amounts of alloying elements — other than carbon and the commonly accepted amounts of manganese, copper, silicon, Sulphur, and phosphorus — are known as Monel K500 Forged Socket Weld Plug.

Monel Alloy K500 Socket Weld Fittings

 

Monel Alloy K500 Socket Weld Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Monel K500 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cu Mo Ni Fe
Monel K500 0.25 max 1.5 max 0.50 max – 0.010 max 27 – 33 – 63.00 min 0.5-2 max

Monel K500 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.44 g/cm3 1350 °C (2550 °F) Psi – 160000 , MPa – 1100 Psi – 115000 , MPa – 790 20 %

Equivalent Grades for K500 Monel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Monel K500 2.4375 N05500 – – – – –

Monel K500 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Monel K500 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-16T17:17:44+05:30October 19th, 2021|

SACHIYA STEEL INTERNATIONAL

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top