LOGO 1200 X 300

class 6000 fittings

Stainless Steel 410 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Stainless Steel 410 Socket Weld Fittings, where it does not soak but commence forging immediately. Heat this Stainless Steel 410 Forged Socket Weld Elbow uniformly up to 1100 Degree C – 1200 Degree C, and hold until temperature is uniform throughout the section. Prior to nitriding, the chrome oxide film which protects the surface of Stainless Steel 410 Forged Socket Weld Tee must be broken down by pickling or fine sand blasting.

Stainless Steel 410 Forged Socket Weld Cap machines best in the hardened and tempered as supplied condition, and is regarded as being readily machinable with all operations such as turning, milling and reaming etc. Stainless Steel 410 Forged Socket Weld Coupling is capable of being carried out as per machine manufacturer’s recommendations for suitable tool type, feeds and speeds.

Stainless Steel 410 Forged Socket Weld Cross does not work harden to the same extent as the 300 series austenitic stainless steels, but is more similar in this respect to the low alloy high tensile steels. Nitriding of Stainless Steel 410 Forged Socket Weld Union is carried out at 500 Degree C – 550 Degree C followed by slow cooling (no quench) reducing the problem of distortion. Parts of Stainless Steel 410 Forged Socket Weld Plug can therefore be machined to near final size, leaving a grinding tolerance only.

Stainless Steel 410 Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

SS 410 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 410 0.08 max 2 max 0.75 max 0.045 max 0.030 max 18 – 20 – 8 – 11 –

Stainless Steel 410 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 410 Stainless Steel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 410 1.4006 S41000 SUS 410 410 S 21 – Z 12 C 13 –

Stainless Steel 410 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 410 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-26T11:58:23+05:30October 4th, 2021|

Stainless Steel 347H Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Stainless Steel 347H Socket Weld Fittings, which applies to both quench – annealed and welded material. In certain applications, e.g. suction rolls in paper mills, the resistance of Stainless Steel 347H Forged Socket Weld Elbow to corrosion fatigue has a crucial bearing on its service life. Laboratory tests have shown that Stainless Steel 347H Forged Socket Weld Tee has far better fatigue strength under corrosive conditions. The force requirement for bending is about twice as high for Stainless Steel 347H Forged Socket Weld Cap, but when the proof strength is exceeded, the plastic deformation takes place just as easily in austenitic stainless steels.

However, under service conditions where the risk of stress corrosion cracking starts to increase for example where the temperature of Stainless Steel 347H Forged Socket Weld Cross is nearly 150 Degree C (300 Degree F) in oxygen – bearing environment, and heat treatment is recommended even after moderate cold bending.

The mechanical machining of Stainless Steel 347H Forged Socket Weld Union always requires an adjustment of cutting data and machining method to give satisfactory results. When turning is undertaken with carbide – tipped tools, the cutting speed should be reduced by 20 % for finish machining and 60 % for rough machining compared to the cutting speeds applied for Stainless Steel 347H Forged Socket Weld Plug.

Stainless Steel 347H Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

SS 347H Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr Cb Ni Fe
SS 347H 0.04-0.10 max 2 max 1.0 max 0.045 max 0.030 max 17 – 19 8xC – 1.10 9 – 13 63.72 min

Stainless Steel 347H Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1454 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 347H Stainless Steel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 347H 1.4550 S34709 SUS 347H – – – X6CrNiNb18-12

Stainless Steel 347H Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 347H Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-26T18:04:19+05:30October 2nd, 2021|

Stainless Steel 347 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Stainless Steel 347 Socket Weld Fittings, where the restitution of a strong chromium oxide film starts in the subsequent rinsing in water. The addition of chromium to Stainless Steel 347 Forged Socket Weld Elbow results in the formation of a passivating oxide film with a high content of chromium oxides. This oxide film protects the surface of Stainless Steel 347 Forged Socket Weld Tee against oxygen in air and water. An outstanding property of Stainless Steel 347 Forged Socket Weld Cap is that the chromium oxide film automatically regenerates if the surface of the steel is exposed.

This restitution of the oxide film can only occur if the surface of Stainless Steel 347 Forged Socket Weld Coupling is completely clean and free of tempering agents and slag from welding processes and residues from tools made from ordinary carbon steel. If this surface contamination is not removed, Stainless Steel 347 Forged Socket Weld Cross may ultimately corrode.

To prevent this, Stainless Steel 347 Forged Socket Weld Union surfaces should be cleaned after welding and processing, e.g. by means of so – called acid pickling of the stainless steel. The pickling effectively removes all impurities from the surface of Stainless Steel 347 Forged Socket Weld Plug and permits the reestablishment of a strong, uniform chromium oxide film.

Stainless Steel 347 Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

SS 347 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr Cb Ni Fe
SS 347 0.08 max 2 max 1.0 max 0.045 max 0.030 max 17 – 20 10xC – 1.10 9 – 13 62.74 min

Stainless Steel 347 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1454 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 347 Stainless Steel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 347 1.4550 S34700 SUS 347 – 08Ch18N12B – X6CrNiNb18-10

Stainless Steel 347 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 347 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-27T16:01:32+05:30October 2nd, 2021|

Stainless Steel 321 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Stainless Steel 321 Socket Weld Fittings, which is readily welded by most standard processes. Stainless Steel 321 Forged Socket Weld Fittings should be considered for applications requiring intermittent heating between 800 º F (427 º C) and 1650 º F (899 º C). In welded ambient temperature applications, Stainless Steel 321H Forged Socket Weld Fittings has been replaced by SS 304L.

Stainless Steel 321 Forged Socket Weld Elbow Fittings has excellent resistance to inter-granular corrosion and has excellent weldability. Stainless Steel 321 Forged Socket Weld Tee Fittings has excellent corrosion resistance at normal temperatures but is primarily designed to perform at elevated temperatures. Austenitic class of Stainless Steel 321 Forged Socket Weld Cap Fittings is generally considered to be weldable by the common fusion and resistance techniques. Stainless Steel 321 Forged Socket Weld Coupling Fittings is often used for aircraft piston engine manifolds and exhaust stacks.

Typical applications of Stainless Steel 321 Forged Socket Weld Cross Fittings include Aircraft exhaust manifolds and Expansion joints. Stainless Steel 321 Forged Socket Weld Union Fittings is extremely beneficial in applications of temperatures ranging from 800 ° F, to 1600 ° F, as it eliminates the necessity for re-annealing after fabrication. These Stainless Steel 321 Forged Socket Weld Plug Fittings is also used in Weld equipment and Chemical processing equipment.

Stainless Steel 321/321H Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

SS 321/321H Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr N Ni Ti
SS 321 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 5(C+N) – 0.70 max
SS 321H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 4(C+N) – 0.70 max

Stainless Steel 321/321H Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 321/321H Stainless Steel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS EN
SS 321 1.4541 S32100 SUS 321 X6CrNiTi18-10
SS 321H 1.4878 S32109 SUS 321H X12CrNiTi18-9

Stainless Steel 321/321H Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 321/321H Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-29T11:49:49+05:30October 1st, 2021|

Stainless Steel 317L Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Stainless Steel 317L Socket Weld Fittings , which is provided by the strain associated with the stress – induced transformation and the high work – hardening rate of the martensitic product. The abrasion resistance of Stainless Steel 317L Forged Socket Weld Elbow was shown to be superior to that of mild steel. The abrasive – corrosive properties of Stainless Steel 317L Forged Socket Weld Tee are very much superior to those of most proprietary abrasion – resistant alloys.

Stainless Steel 317L Forged Socket Weld Cap appear to have the best overall abrasion resistance within the stainless steel group and under slow rates of strain their dry abrasion resistance is superior to those of typical abrasion – resistant alloys. Such abrasion resistance coupled with toughness and good corrosion resistance would clearly allow these Stainless Steel 317L Forged Socket Weld Coupling to compete successfully in many situations involving abrasive – corrosive wear.

The optimum Stainless Steel 317L Forged Socket Weld Cross would appear to be either an inexpensive metastable austenitic grade or a duplex stainless steel consisting of a fine – grained mixture of ferrite and unstable austenite. This proposal in Stainless Steel 317L Forged Socket Weld Union is consistent with the effects which prior cold work and speed of abrasion have on the wear properties and the X-ray diffraction and electron microscopy examinations of the abraded surfaces.

Stainless Steel 317L Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

SS 317L Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 317L 0.035 max 2 max 1.0max 0.045 max 0.030 max 18 – 20 3.0-4.0 11.0-15.0 57.89 min

Stainless Steel 317L Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 317L Stainless Steel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 317L 1.4438 S31703 SUS 317L  – – –  X2CrNiMo18-15-4

Stainless Steel 317L Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 317L Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-29T17:59:37+05:30October 1st, 2021|

Stainless Steel 317 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of high quality Stainless Steel 317 Socket Weld Fitting, which has the highest machinability of any stainless steel, at about 85 % of that of free – machining carbon steel. These Stainless Steel 317 Forged Socket Weld Elbow has good resistance to scaling up to approximately 650 Degree C, but generally not recommended for use in temperatures between 400 Degree C and 580 Degree C, for the reason that of the reduction in mechanical properties. Heat this Stainless Steel 317 Forged Socket Weld Tee up to 925 Degree C – 1010 Degree C, followed by quenching in oil or air, where oil quenching is necessary for heavy sections.

These Stainless Steel 317 Forged Socket Weld Cap  tempers, generally within the range 200 Degree C – 400 Degree C, to obtain a variety of hardness values and mechanical properties. We offer our customers with a variety of our top quality Stainless Steel 317 Forged Socket Weld Cross  that are employed in various end uses in process industries, construction and architectural applications and are obtainable in diverse shapes and sizes.

These Stainless Steel 317 Forged Socket Weld Union  are readily welded by all standard methods, but a pre – heat of 150 Degree C – 260 Degree C and post – weld annealing treatment is required to reduce the possibility of cracking.

Stainless Steel 317 Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

SS 317 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 317 0.08 max 2 max 1.0max 0.045 max 0.030 max 18 – 20 3.0-4.0 11.0-15.0 57.845 min

Stainless Steel 317 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 317 Stainless Steel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 317 1.4449 S31700 SUS 317

Stainless Steel 317 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 317 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-30T19:00:49+05:30September 30th, 2021|

Stainless Steel 316Ti Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 316Ti Socket Weld Fittings, which is considered to be more resistant to oxidation than type 316, especially in warm marine environments. Stainless Steel 316Ti Forged Socket Weld Elbow also shows resistance in extremely low temperatures, even down to cryogenic levels. In regards to heat, Stainless Steel 316Ti Forged Socket Weld Tee shows better resistance to creep, stress to rupture and overall strength than other stainless steel grades.

Many of the same work practices effective on Stainless Steel 316Ti Forged Socket Weld Cap may also be employed, including weldability and work hardening through cold working. In addition, Stainless Steel 316Ti Forged Socket Weld Coupling does not require post-work annealing to maximize its corrosion resistance, however annealing may be utilized in certain situations. Stainless Steel 316Ti Forged Socket Weld Cross is referred to as the stabilized grade of the 316 types, and also is recommended for higher temperature situations.

Stainless Steel 316Ti Forged Socket Weld Union contains a small amount — typically only 0.5 % — of titanium, where its low levels of carbon protects it against carbon precipitation. While it still possesses many of the characteristics of other 316 grades, the addition of titanium allows Stainless Steel 316Ti Forged Socket Weld Plug to be protected from precipitation at elevated temperatures, even with prolonged exposure.

Stainless Steel 316Ti Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

SS 316Ti Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 316Ti 0.08 max 2 max 0.75 max 0.045 max 0.030 max 16 – 18 2.00-3.00 10.00 – 14.00 68.395 min

Stainless Steel 316Ti Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 316Ti Stainless Steel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316Ti 1.4571 S31635 SUS 316Ti 320S31 08Ch17N13M2T Z6CNDT17‐123 X6CrNiMoTi17-12-2

Stainless Steel 316Ti Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 316Ti Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-01-04T16:14:39+05:30September 30th, 2021|

Stainless Steel 316 Socket Weld Fittings Manufacturers In India

Stainless Steel 316 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter for Stainless Steel 316 Socket Weld Fittings, which has excellent resistance to the various corrosive media that are typically found in both onshore and offshore environments. There are two significant benefits of Stainless Steel 316 Forged Socket Weld Elbow  that make this material so attractive to the Oil and Gas Industry. The high resistance of Stainless Steel 316L Forged Socket Weld Tee to chloride – induced stress corrosion cracking is of particular importance here.

The high strength of Stainless Steel 316 Forged Socket Weld Cap  is extremely beneficial in dealing with the high pressures encountered at great depths. Stainless Steel 316L Forged Socket Weld Coupling can also offer some material cost advantages as compared to alternative choices, but upfront cost is not usually a primary driver, especially for undersea extractions. The high cost of failure in oil fields of great depths makes Stainless Steel 316 Forged Socket Weld Cross imperative that the best material for the job is selected upfront.

Thus, Stainless Steel 316L Forged Socket Weld Union is critical that all cost calculations include lifetime maintenance and potential cost risks due to failures in order to truly evaluate costs when selecting materials. In certain cases, resistance to design stress of Stainless Steel 316 Forged Socket Weld Plug is important are preferred.

Stainless Steel 316/316L Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

SS 316/316L Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 316 0.008max 2 max 1.00 max 0.045 max 0.030 max 16 – 18 2.00-3.00 11.00-14.00 –
SS 316L 0.035 max 2 max 1.00 max 0.045 max 0.030 max 16– 18 2.00-3.00 10.00 – 14.00 –

Stainless Steel 316/316L Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 316/316L Stainless Steel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316 1.4401/1.4436 S31600 SUS 316 316S31 / 316S33 – Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L 1.4404/1.4435 S31008 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3

Stainless Steel 316 Socket Weld Fittings

Stainless Steel 310/310S Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 310/310S Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-22T12:05:04+05:30September 29th, 2021|

Stainless Steel 310H Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of high quality Stainless Steel 310H Socket Weld Fittings, which contain between the ranges of 1 % – 5% of other metals (often nickel or tungsten). Stainless Steel 310H Forged Socket Weld Elbow is an alloy of iron and various other metals, which are used to enhance the properties (strength, resistance to corrosion, tolerance of heat etc.) of iron. Changing the type and amount of the elements alloyed with iron in Stainless Steel 310H Forged Socket Weld Tee can produce different types of steel. Stainless Steel 310H Forged Socket Weld Cap is able to withstand high levels of tension and is, thus, often used in the construction of bridges and for making bicycle chains.

Stainless Steel 310H Forged Socket Weld Coupling keep their shape and strength in high – temperature environments and are used in impact, rotary applications, such as drill bits. Stainless Steel 310H Forged Socket Weld Cross was once the primary structural material, but it has long been replaced by other steel in most applications.

Nevertheless, Stainless Steel 310H Forged Socket Weld Union is still used in pipes and to make automotive parts, such as cylinder heads, cylinder blocks and gearbox cases. Stainless Steel 310H Forged Socket Weld Plug is still used to produce home décor items, such as wine racks, candle holders and curtain rods.

Stainless Steel 310H Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

SS 310H Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 310H 0.04-0.10 max 2 max 1.00 max 0.045 max 0.030 max 24-26 – 19-21 –

Stainless Steel 310H Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40%

Equivalent Grades for 310H Stainless Steel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310H – S31009 – – – – –

Stainless Steel 310H Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 310H Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-03-13T11:46:04+05:30September 29th, 2021|

Stainless Steel 310 Socket Weld Fittings Manufacturers In India

Stainless Steel 310 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of high quality Stainless Steel 310 Socket Weld Fittings, which is the world’s most recycled material. The unique magnetic properties of Stainless Steel 310 Forged Socket Weld Elbow make it an easy material to recover from the waste stream to be recycled. The properties of Stainless Steel 310S Forged Socket Weld Tee remain unchanged no matter how many times the steel is recycled. The electric arc furnace (EAF) method of Stainless Steel 310 Forged Socket Weld Cap production can use exclusively recycled steel.

Many elements and materials in Stainless Steel 310S Forged Socket Weld Coupling go through chemical reactions with other elements. When Stainless Steel 310 Forged Socket Weld Cross comes into contact with water and oxygen there is a chemical reaction and the steel begins to revert to its original form – iron oxide. In most modern applications of Stainless Steel 310S Forged Socket Weld Lateral Tee , this problem is easily overcome by coating, where many different coating materials can be applied to steel.

Paint is used to coat cars and enamel is used on refrigerators and other domestic appliances for Stainless Steel 310 Forged Socket Weld Union . In other cases, elements such as nickel and chromium are added to make Stainless Steel 310S Forged Socket Weld Plug , which can help prevent rust.

Stainless Steel 310 Socket Weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

SS 310/310S Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 310 0.015 max 2 max 0.15 max 0.020 max 0.015 max 24 – 26 0.10 19 – 21 –
SS 310S 0.08 max 2 max 1.00 max 0.045 max 0.030 max 24 – 26 0.75 19 – 21 –

Stainless Steel 310/310S Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %

Equivalent Grades for 310/310S Stainless Steel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 – X15CrNi25-20
SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18 – X8CrNi25-21

Stainless Steel 310 Socket Weld Fittings

Stainless Steel 310/310S Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 310/310S Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-03-27T16:38:28+05:30September 28th, 2021|
LOGO 1200 X 300

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top