Tube to Male Fittings

Monel Alloy K500 Tube to Male Fittings Manufacturers In India

Monel Alloy K500 Tube to Male Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Tube to Male Fittings, which are mass – produced under the management of our knowledgeable specialists. The finest machinability for this Monel K500 Tube Fittings is in the annealed form. The corrosion resistance of Monel K500 Compression Fittings is considerably corresponding to that of alloy K500, apart from that, when in the age – hard-bitten form, it has a superior propensity to SCC in some atmospheres.

Monel Alloy K500 Tube to Male Fittings

Monel K500 Male Connector Fittings is generally used in Chemical Process Industry: such as in procedures connecting organic acids, dry chlorine and caustic soda, manufacture of chlorinated plastics, and so on. Monel K500 Ferrule Fittings (UNS N05500) has resistant to a sour – gas atmosphere. Meanwhile, these Monel K500 Double Ferrule Fittings are also being offered in different sizes and shapes to our customers. The high chromium content gives Alloy K500 Tube Fittings excellent resistance to aqueous corrosion by oxidizing acids (especially nitric acid) and salts and to suffixation at high – temperatures.

Alloy K500 Compression Fittings has a superior stress cracking resistance than Monel K500 in steam generation nuclear reactors for piping, separators and weldments. The properties of Alloy K500 Male Connector Fittings are useful for various applications involving nitric or nitric / hydrofluoric acid solutions. These impact strengths (averages from several tests) in Alloy K500 Ferrule Fittings were generated using notch samples, which are machined from plates.

Monel Alloy K500 Tube to Male Fittings Specifications

Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Monel, 300/1000/3000PSI for Brass

Monel Alloy K500 Tube To Male Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni
Monel K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min

Monel K500 Tube To Male Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel K500 8.44 g/cm3 1350 °C (2460 °F) Psi – 160000 , MPa – 1100 Psi – 115000 , MPa – 790 20 %

Equivalent Grades for K500 Monel Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS
Monel K500 2.4375 N05500

Alloy K500 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Monel K500 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-16T17:08:35+05:30November 20th, 2021|

Monel Alloy 400 Tube to Male Fittings Manufacturers In India

Monel Alloy 400 Tube to Male Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Tube to Male Fittings, where these products is being provided by us is factory – made using superior quality of metal. Our Monel 400 Tube Fittings are characterized by their resistance to attack by alkalis and acids, in addition to their superior mechanical potency and excellent ductility. Welding techniques comprising metal – arc welding, gas – arc welding, submerged – arc welding and gas – metal – arc welding are suggested on these Monel 400 Compression Fittings.

Monel Alloy 400 Tube to Male Fittings

Heavy duty machining tooling and equipment must be used in our Monel 400 Male Connector Fittings to lessen down chatter or work – toughening of the alloy onward of the cutting. These Monel 400 Ferrule Fittings (UNS N04400) is a rock – solid solution alloy which can merely be hardboiled by cold functioning. Meanwhile, our Monel 400 Double Ferrule Fittings are also being offered in different sizes and shapes to our customers.

These Alloy 400 Male Connector Fittings has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000 Degree F, and its melting point is 2370 Degree F – 2460 Degree F. The presence of our Monel 400 Compression Tube Fittings can lead to galvanic corrosion. In other words, if aluminum, zinc, or iron are used as fasteners for these Monel 400 Double Ferrule Fittings and then exposed to certain conditions, the metal will quickly corrode.

Monel Alloy 400 Tube to Male Fittings Specifications

Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Monel, 300/1000/3000PSI for Brass

Monel Alloy 400 Tube To Male Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni
Monel 400 0.30 max 2.00 max 0.50 max 0.024 max 28.00 – 34.00 2.50 max 63.00 min

Monel 400 Tube To Male Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %

Equivalent Grades for 400 Monel Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Monel 400 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe

Alloy 400 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Monel 400 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-16T18:52:14+05:30November 18th, 2021|

Hastelloy X Tube to Male Fittings Manufacturers In India

Hastelloy X Tube to Male Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy X Tube to Male Fittings, where the hot – working range is 1600 Degree F to 2150 Degree F. All our offered products such as Hastelloy X Tube Fittings are engineered by a team of skilled professionals which makes it a point to use advanced machines and equipment in the manufacturing process. Hastelloy X Compression Fittings is one of the most extensively used nickel base super – alloys for gas turbine engine parts. Hastelloy X Ferrule Fittings has also been found to be remarkably resistant to SCC in petrochemical uses. It is well suitable for welding and forming.

Hastelloy X Tube to Male Fittings

Molybdenum, iron, nickel and chromium content make these Hastelloy X Double Ferrule Fittings one of the world’s most well – liked named products. Hastelloy X Male Connector Fittings (UNS N06002) has soaring potency up to 816 Degree C and excellent oxidation resistance up to 1204 Degree C. Meanwhile, these Alloy X Male Connector Tube Fittings are also being offered in customized sizes and shapes to our customers.

Sachiya Steel International is one of the prominent dealer and trader of Alloy X Ferrule Fittings, which has good mechanical properties at cryogenic temperatures to moderately high temperatures up to 538 Degree C. Alloy X Double Ferrule Fittings is a versatile austenitic nickel – chromium – molybdenum – tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking.

Hastelloy X Tube to Male Fittings Specifications

Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Hastelloy, 300/1000/3000PSI for Brass

Hastelloy Alloy X Tube To Male Fittings Chemical Composition

Grade Ni Mo Cr Fe Mn C Co Si P S
Hastelloy X Balance 8.00 – 10.00 20.50 – 23.00 17.00 – 20.00 1.00 max 0.05 – 0.15 0.50 – 2.50 1.00 max 0.04 max 0.03 max

Hastelloy X Tube To Male Fittings Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.22 g/cm³ 1355°C 655 MPa 240 MPa 35%

Equivalent Grades for X Hastelloy Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS
Hastelloy X 2.4665 N06002

Alloy X Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy X Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-11T13:25:31+05:30November 18th, 2021|

Hastelloy B3 Tube to Male Fittings Manufacturer In India

Hastelloy B3 Tube to Male Fittings Manufacturer In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy B3 Tube to Male Fittings, which has some admirable features to offer such as durable, fine finish, accurate dimensions, and so on. Hastelloy B3 Tube Fittings has a special understanding deliberate to accomplish a level of thermal stability that is significantly higher to that of its forerunners. Hastelloy B3 Compression Fittings is not suggested for use in the existence of cupric or ferric salts for the reason that these salts can source untimely failure. Hastelloy B3 Male Connector Fittings has excellent oxidation and creep resistance, and has an unusual chemistry considered attaining superior thermal constancy than Alloy B-2, resulting in stress – free fabrication.

 Hastelloy B3 Ferrule Fittings (UNS N10675) has immense resistance to heat – affected and knife – line area attack. Meanwhile, these Hastelloy B3 Double Ferrule Fittings are also being offered in customized sizes and shapes to our customers. A comparison of yield strengths for the very high strength conditions in Alloy B3 Male Connector Fittings is exposed along with that of the annealed and “standard” conditions.

Hastelloy B3 Tube to Male Fittings

Alloy B3 Tube Fittings, does not recommend use of highly cold worked and aged material because the increase in yield strengths is minimal and the susceptibility to hydrogen embrittlement in severe oil well conditions is increased. While this strength level is almost double of Alloy B3 Compression Fittings in the annealed condition, many oil and gas applications require even greater strength.

Hastelloy B3 Tube to Male Fittings Specifications

Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Hastelloy, 300/1000/3000PSI for Brass

Hastelloy Alloy B3 Tube To Male Fittings Chemical Composition

Grade C Mn Si Al P Fe Mo Ni Cr Ti W V
Hastelloy B3 0.01 max 3.0 max 10 max 0.50 max 1.5 28.5 65.0 min 1.5 0.2 max 3.0 max

Hastelloy B3 Tube To Male Fittings Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
9.2 g/cm3 1370 °C (2550 °F) Psi – 1,15,000 , MPa –760 Psi – 52,000 , MPa – 350 40%

Equivalent Grades for B3 Hastelloy Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS JIS EN
Hastelloy B3 2.4600 N10675

Alloy B3 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy B3 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-16T18:53:45+05:30November 17th, 2021|

Hastelloy B2 Tube to Male Fittings Manufacturer In India

Hastelloy B2 Tube to Male Fittings Manufacturer In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy B2 Tube to Male Fittings, where all our offered products are ensured for their seamless finish and design. These Hastelloy B2 Tube Fittings must not be used in oxidizing media or where oxidizing pollutants are accessible in reducing media. In excess of most other metals of parallel chemistry, our Hastelloy B2 Compression Fittings offers higher protection in opposition to commanding chemical corrosion and comes by means of one of the finest high – temperature potencies of any steel.

These Hastelloy B2 Male Connector Fittings can be machined by using all the customary machining procedures. Our Hastelloy B2 Ferrule Fittings (UNS N10665) must not be used at temperatures in the range of 1000 Degree F and 1600 Degree F as the alloy forms secondary stages that may perhaps lessen the ductility of the product. Meanwhile, these Hastelloy B2 Double Ferrule Fittings are also being offered in customized sizes and shapes to our customers.

Hastelloy B2 Tube to Male Fittings

Our Alloy B2 Male Connector Tube Fittings is seldom attacked to this degree in other media, where in fact only one – third of the coupon thickness in the heat – affected zone survived the corrosion test. Experiments in these Alloy B2 Tube Fittings were performed in increments of solution temperature of 5 degree C for a 24 – hour exposure period to determine the critical pitting temperature, i.e. the lowest temperature at which pitting corrosion initiated.

Hastelloy B2 Tube to Male Fittings Specifications

Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Hastelloy, 300/1000/3000PSI for Brass

Hastelloy Alloy B2 Tube To Male Fittings Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
B2 0.010 max 1.00 max 0.08 max 0.03 max 2.50 max 50.99 min* 14.50 – 16.50 4.00 – 7.00 15.00 – 17.00 0.04 max

Hastelloy B2 Tube To Male Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy B2 8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40 %

Equivalent Grades for B2 Hastelloy Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy B2 2.4617 N10665 NW 0276 ХН65МВУ NiMo16Cr15W ЭП760

Alloy B2 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy B2 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-18T15:05:57+05:30November 17th, 2021|

Hastelloy C276 Tube to Male Fittings Manufacturers In India

Hastelloy C276 Tube to Male Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer and Exporter Of High Quality Hastelloy C276 Tube to Male Fittings, which has some outstanding features to offer such as durable finish standards, dimensional accuracy, corrosion resistant and so on. Hastelloy C276 Tube Fittings must be well – thought – out for use in atmospheres where resistance to hot contaminated mineral acids, inorganic and organic chloride – contaminated media, acetic and formic acids, chlorine, acetic, brine solutions and sea water, acetic anhydride is desired.

Hastelloy C276 Compression Fittings can be cold worked by all conservative means, and further endures the corrosive effects of hypochlorite, chlorine dioxide and wet chlorine gas. The low content of carbon in Hastelloy C276 Male Connector Fittings (UNS N10276) reduces carbide precipitation throughout welding to uphold corrosion resistance in as – welded constructions. Meanwhile, these Hastelloy C276 Ferrule Fittings are also being offered in customized sizes and shapes to our customers.

Hastelloy C276 Tube to Male Fittings

The corrosion resistance of Hastelloy C276 Double Ferrule Fittings is excellent up to 1300 Degree F (704 Degree C) against many atmospheres encountered in jet engine service. Up to 1800 Degree F (982 Degree C), the oxidation resistance of Alloy C276 Male Connector Tube Fittings is equivalent to that of Type 310 stainless. Sachiya Steel International is one of the prominent dealer & manufacturer for Alloy C276 Tube Fittings, which is suitable for its use in all applications that previously requiring the use of Hastelloy B-2 alloy.

Hastelloy C276 Tube to Male Fittings Specifications

Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Hastelloy, 300/1000/3000PSI for Brass

Hastelloy Alloy C276 Tube To Male Fittings Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
C276 0.010 max 1.00 max 0.08 max 0.03 max 2.50 max 50.99 min* 14.50 – 16.50 4.00 – 7.00 15.00 – 17.00 0.04 max

Hastelloy C276 Tube To Male Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C276 8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355</t

Equivalent Grades for C276 Hastelloy Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C276 2.4819 N10276 NW 0276 ХН65МВУ NiMo16Cr15W ЭП760

Alloy C276 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy C276 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-13T17:43:30+05:30November 16th, 2021|

Hastelloy C22 Tube to Male Fittings Manufacturer In India

Hastelloy C22 Tube to Male Fittings Manufacturer In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy C22 Tube to Male Fittings to the well – regarded customers, which are mass – produced by using original grade stainless steel. Hastelloy C22 Tube Fittings is also in an extensive range of hazardous waste management machineries where soaring corrosion – resistance of serious machinery is essential for safety, cost effectiveness, reliability, and reduced maintenance. Hastelloy C22 Compression Fittings has exceptional resistance to both oxidizing and reducing media, and for the reason that of its resistibility, it can be used where “distressed” environments are expected to happen.

Hastelloy C22 Male Connector Fittings (UNS N06022) is used in nuclear fuel salvaging, chlorination systems, pickling systems, and so on. Meanwhile, these Hastelloy C22 Ferrule Fittings are also being offered in customized sizes and shapes to our customers, where we also offer the same at market leading rates. While cold work does not usually affect the resistance of Hastelloy C22 Double Fittings to general corrosion, and to chloride – induced pitting and crevice attack, it can affect resistance to stress corrosion cracking.

Hastelloy C22 Tube to Male Fittings

Alloy C22 Male Connector Fittings is Nickel – Chromium – Molybdenum – Tungsten alloy with better overall corrosion resistance than any other Ni – Cr – Mo alloy. These Alloy C22 Compression Fittings exhibits superior welding conditions, providing excellent as – welded conditions for process applications in chemical – based industries such as food, beverage, personal care, and pharmaceutical.

Hastelloy C22 Tube to Male Fittings Specifications

Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Hastelloy, 300/1000/3000PSI for Brass

Hastelloy Alloy C22 Tube To Male Fittings Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
C22 0.010 max 0.50 max 0.08 max 0.02 max 2.50 max 50.015 min* 20.00 – 22.50 2.00 – 6.00 12.50 – 14.50 0.02 max

Hastelloy C22 Tube To Male Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C22 8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %

Equivalent Grades for C22 Hastelloy Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C22 2.4602 N06022 NW 6022 NiCr21Mo14W

Alloy C22 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy C22 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-15T18:52:48+05:30November 16th, 2021|

Incoloy 925 Tube to Male Fittings Manufacturer In India

Incoloy 925 Tube to Male Fittings Manufacturer In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Incoloy 925 Tube to Male Fittings, which can be cold worked by using standard tooling. Heavy duty machining equipment and tooling should be used to minimize chatter or work – hardening of Incoloy 925 Tube Fittings ahead of the cutting. Incoloy 925 Compression Fittings is particularly useful in sour (H2S containing) crude oil, sulfuric acid, natural gas, seawater and phosphoric acid. Incoloy 925 Compression Tube Fittings should be welded using gas – tungsten – arc welding, with filler materials of base – metal composition.

Used by many within the sour crude oil applications (contains H2S), Incoloy 925 Ferrule Fittings is a nickel – iron – chromium alloy that as well has elements of molybdenum – copper – titanium – and aluminum. Incoloy 925 Double Ferrule Fittings is an alloy of high resistance to corrosion and high mechanical strength. Alloy 925 Tube Fittings is a precipitation – harden able nickel – iron – chromium alloy with additions of molybdenum and copper, which is being used in various applications requiring a combination of high strength and corrosion resistance.

Incoloy 925 Tube to Male Fittings

The additions of titanium and aluminum in Alloy 925 Compression Fittings enable it to be age – hardened while molybdenum and copper contents enhance resistance to corrosive media. As it is a precipitation – harden able nickel – iron – chromium alloy, Incoloy 925 Male Connector Fittings combines high strength with Incoloy 925 Male Connector Fittings’ excellent corrosion resistance.

Incoloy 925 Tube to Male Fittings Specifications

Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Incoloy, 300/1000/3000PSI for Brass

Incoloy 925 Tube To Male Fittings Chemical Composition

Grade Ni Cr Fe Si Mo Cu Mn C S Al
Incoloy 925 42 – 46 19.55 – 22.5 22 min 0.5 max 2.5 – 3.5 1.5 – 3.0 1.0 max 0.03 max 0.03 max 0.1 – 0.5

Incoloy 925 Tube To Male Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
925 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

Equivalent Grades for 925 Incoloy Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS
Incoloy 925 N09925

Alloy 925 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Incoloy 925 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-08T18:54:41+05:30November 15th, 2021|

Incoloy 330 Tube to Male Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Incoloy 330 Tube to Male Fittings to the clients, which is readily welded and is formed much like standard stainless steels. The ultra – high nickel content of 34 % to 37 % of Inconel 330 Compression Fittings also provides high resistance to chloride stress corrosion cracking and embrittlement from the precipitation of sigma phase in most furnace atmospheres. The oxidation resistance is also enhanced by the silicon content of Inconel 330 Tube Fittings, where any hot work should commence at 2100 Degree F – 2150 Degree F and finish at 1800 Degree F.

Incoloy 330 Tube to Male Fittings

Inconel 330 Male Connector Fittings is often used in Condensers, Heat Exchangers, Pulp and Paper Industry etc. In general, Inconel 330 Compression Tube Fittings outperforms almost all stainless steels along with the higher – carbon variants of 304 and 316. SS 330 Male Connector Fittings is also used in muffles, retorts, conveyor systems, baskets and boxes and various fixtures. Ra 330 Male Connector Fittings offers benefits in these conditions including resistance to hydrogen chloride and hydrogen sulfide, and helping to reduce PTA or chloride stress corrosion cracking.

Alloy 330 Male Connector Fittings is an austenitic heat and corrosion resisting alloy offering an exceptional combination of strength and resistance to carburization, oxidation and thermal shock. Ra 330 Tube Fittings has oxidation resistance to 2100 Degree F and resistant to carburization and nitriding.

Incoloy 330/SS 330/Ra 330 Tube to Male Fittings Specifications

Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Incoloy, 300/1000/3000PSI for Brass

Incoloy Alloy 330/SS 330/Ra 330 Tube To Male Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Sn Pb
330 0.08 max 2.00 max 0.75-1.50 0.03 max 1.00 max Balance 34.0-37.0 17.0-20.0 0.025 0.005 max

Equivalent Grades for 330/SS 330/Ra 330 Incoloy Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS
Incoloy 330 1.4886 N08330

Alloy 330/SS 330/Ra 330 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Incoloy 330/SS 330/Ra 330 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-05T15:22:48+05:30November 15th, 2021|Tube to Male Fittings|

Incoloy 825 Tube to Male Fittings Manufacturers In India

Incoloy 825 Tube to Male Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Incoloy 825 Tube to Male Fittings, which has good weldability for all conventional processes. Heavy duty machining equipment and tooling in Incoloy 825 Tube Fittings should be used to minimize chatter or work-hardening of the alloy ahead of the cutting. Incoloy 825 Compression Fittings is the face – centered cubic lattice structure, which is hardened by cold work only. If exposed for long times to the sensitive temperature range 1200 Degree F – 1400 Degree F, Incoloy 825 Compression Tube Fittings may exhibit severe inter – granular corrosion in certain very aggressive environments.

Incoloy 825 Tube to Male Fittings

However, exposure to temperatures above 1000 Degree F in Incoloy 825 Ferrule Fittings can result in microstructural changes that significantly lower ductility and impact strength. In reducing & oxidizing conditions, Incoloy 825 Double Ferrule Fittings resists general corrosion, pitting and crevice corrosion, inter – granular corrosion and stress corrosion cracking.

Incoloy 825 Male Connector Fittings is an austenitic nickel – iron – chromium alloy with additions of molybdenum, copper and titanium, where the corrosion resistance of deposited weld metal from both covered electrode and bare wire is equivalent to that of the parent metal. The resistance of Alloy 825 Tube Fittings to general and localized corrosion under diverse conditions gives the alloy broad usefulness. Alloy 825 Compression Fittings is characterized by approval for pressure vessels with wall temperatures up to 450 Degree C (842 Degree F).

Incoloy 825 Tube to Male Fittings Specifications

Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Incoloy, 300/1000/3000PSI for Brass

Incoloy Alloy 825 Tube To Male Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Al Ti
825 0.05 max 1.00 max 0.5 max 0.03 max 1.50 – 3.00 22.00 min 38.00 – 46.00 19.50 – 23.50 0.02 max 0.06 – 1.20

Incoloy 825 Tube To Male Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

Equivalent Grades for 825 Incoloy Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo XH38BT

Alloy 825 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Incoloy 825 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-09T16:13:02+05:30November 13th, 2021|
Go to Top