LOGO 1200 X 300

Nipple

Inconel 625 Nipple Manufacturers In India

Inconel 625 Nipple Manufacturers In India

Sachiya Steel International offers an extensive collection of Inconel 625 Nipple, where the nickel and chromium provide resistance to oxidizing environments. High tensile, creep and rupture strength, Inconel 625 Hexagonal Reducing Nipple has outstanding fatigue and thermal – fatigue strength. Inconel 625 Hexagonal Nipple is developed for high temperature strength, where its highly alloyed composition provides a high level of general corrosion resistance.

Studies were therefore conducted to test the metal’s weldability, tensile strength and creep resistance, and Alloy 625 One End Threaded Nipple was found to be an ideal choice for welding. Inconel 625 Bothe End Threaded Nipple is often used in exhaust ducts for Navy utility boats, submarine transducer controls, steam – line bellows and sheathing for undersea communication cables. Inconel 625 Concentric Swaged Nipple resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion.

Inconel 625 Nipple

Inconel 625 Eccentric Swaged Nipple is immune to chloride ion stress corrosion cracking and is resistant to caustics. Alloy 625 Hexagonal Reducing Nipple derives much of its strength from the addition of molybdenum and columbium. The chemical composition of Alloy 625 Hexagonal Nipple is also responsible for its outstanding corrosion resistance in a variety of severe operating environments along with resistance to oxidation and carburization in high temperature service. Alloy 625 One End Threaded Nipple has outstanding resistance to pitting, crevice corrosion and inter – crystalline corrosion. Alloy 625 Both End Threaded Nipple is supplemented by various alloys and metals that support its performance characteristics.

Inconel 625 Nipple Specification
Specifications : ASTM A336 & ASME SB336
Dimensions : ANSI/ASME B16.11 & BS3799, etc.
Size : ⅛” to 4”
Class : 2000LBS, 3000LBS, 6250LBS, 9000LBS, etc.

Alloy 625 Nipple Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Inconel 625
 0.10max 0.50 max 0.50 max 0.015max – 5.0 max 58.0 min 20.0 – 23.0

Inconel 625 Nipple Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 625
 8.4 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 517 42.5 %

Equivalent Grades for Inconel Alloy 625 Nipple

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 625 2.4856 N06625 NCF 625 NA 21 ХН75МБТЮ NC22DNB4M NiCr22Mo9Nb

Inconel 625 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 625 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-30T12:41:30+05:30May 6th, 2021|

Inconel 601 Nipple Manufacturers In India

Inconel 601 Nipple Manufacturers In India

Sachiya Steel International offers a widespread sort of Inconel 601 Nipple, which has good aqueous corrosion resistance due to the high nickel content in combination with chromium. Inconel 601 Nipple Inconel 601 Hexagon Reducing Nipple is used in chemical processing equipment and petrochemical processing equipment where its excellent corrosion resistance comes into full play. This is possible due to Inconel 601 Hexagon Nipple having a tightly adherent oxide layer which is resistant against spalling.

Alloy 601 One End Threaded Nipple has outstanding oxidation resistance to 2200 Degree F and resists spalling even under severe thermal cycling conditions. The properties of Inconel 601 Both End Threaded Nipple make it a material of broad utility in such fields as thermal processing, pollution control, aerospace, power generation and chemical processing. Inconel 601 Concentric Swaged Nipple has high degree of metallurgical stability and easier to fabricate and machine.

Alloy 601 Eccentric Swaged Nipple is a nickel – chromium – iron alloy having high temperature oxidation resistance. Alloy 601 Hexagon Reducing Nipple has good hot corrosion resistance under oxidizing conditions. Alloy 601 Hexagon Nipple is hardened and strengthened through a cold work process.

Inconel 601 Nipple

Alloy 601 One End Threaded Nipple is a nickel – chromium alloy that offers outstanding oxidation resistance up to 1204 Degree C. Strength and toughness of Alloy 601 Both End Threaded Nipple are good, and are retained during extended service at high temperature. Exceptional Properties of Alloy 601 Concentric Swaged Nipple is Temperature Resistance and Corrosion Resistance.

Inconel 601 Nipple Specification 
Specifications : ASTM A336 & ASME SB336
Dimensions : ANSI/ASME B16.11 & BS3799, etc.
Size : ⅛” to 4”
Class : 2000LBS, 3000LBS, 6010LBS, 9000LBS, etc.

Alloy 601 Nipple Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Inconel 601 0.10 max 1.00 max 0.50 max 0.015max 1.00 max Balance 58.0 – 63.0 21.0 – 25.0

Inconel 601 Nipple Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 601 8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for Inconel Alloy 601 Nipple

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe

Inconel 601 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 601 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-07T17:15:13+05:30May 6th, 2021|

Inconel 600 Nipple Manufacturers In India

Sachiya Steel International offers an extensive collection of Inconel 600 Nipple, which has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures. Its chromium content gives Inconel 600 Hexagon Reducing Nipple resistance to sulfur compounds and various oxidizing environments. Inconel 600 Hexagon Nipple is often used in phenol condensers, titanium dioxide, soap manufacture, vegetable vessels, fatty acid vessels and more.

Inconel 600 One End Threaded Nipple is also used in Carburizing atmospheres and Ethylene dichloride crackers. Application of Alloy 600 Both End Threaded Nipple is useful in the chemical, aerospace, pulp and paper, and heat treating industries to name a few. It is as well used for furnace components, in food and chemical processing, for sparking electrodes and in nuclear engineering. Inconel 600 Concentric Swaged Nipple is a nickel – chromium alloy with good oxidation resistance at high temperatures and resistance to chloride – ion stress – corrosion cracking, corrosion by high – purity water, and caustic corrosion.

Inconel 600 Nipple

The high nickel content gives Inconel 600 Eccentric Swaged Nipple resistance to corrosion by many organic and inorganic compounds and also makes it virtually immune to chloride – ion stress – corrosion cracking. Inconel UNS N06600 Hexagon Reducing Nipple is non – magnetic, has excellent mechanical properties, and presents the desirable combination of high strength and good weldability under a wide range of temperatures. Alloy 600 Hexagon Nipple is a unique nickel – chromium alloy that is known for its oxidation resistance at higher temperatures.

Inconel 600 Nipple Specification
Specifications : ASTM A336 & ASME SB336
Dimensions : ANSI/ASME B16.11 & BS3799, etc.
Size : ⅛” to 4”
Class : 2000LBS, 3000LBS, 6000LBS, 9000LBS, etc.

Alloy 600 Nipple Chemical Composition

Grade C Mn Si Fe S Cr Cu Ni
600 min. – – – 6.0 – 14.0 – 72.0
max. 0.15 1.0 0.5 10.0 0.015 17.0 0.5 –

Inconel 600 Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
600 Psi – 95,000 , MPa -655 Psi – 45,000 , MPa – 310 40 – –

Equivalent Grades for Inconel Alloy 600 Nipple

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 600 N06600 NA 13 NiCr15Fe 2.4816 NC15FE11M МНЖМц 28-2,5-1,5 NCF 600

Inconel 600 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 600 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-08T14:51:04+05:30May 4th, 2021|

AISI 4130 Steel Nipple Manufacturers In India

Sachiya Steel International is amongst the well – known names in the industry, offering an exceptional array of AISI 4130 Steel Nipple that are durable in nature and are sturdy in construction. Our AISI 4130 Hexagon Reducing Nipple is developed to resist corrosion in dilute sulphuric acid and it is suitable to use in details placed in severe corrosion environments e.g. sulphuric acid tanks. This AISI 4130 Hexagon Nipple has been application proved over many years and was originally developed to resist corrosion in dilute sulfuric acid. Our AISI 4130 One End Threaded Nipple is a super – austenitic stainless steel that is designed for moderate to high corrosion resistance in a wide range of process environments.

Meanwhile, this AISI 4130 Both End Threaded Nipple is as well being offered in different sizes and shapes to our customers. In all types of our AISI 4130 Concentric Swaged Nipple, the alloying elements tend to form carbides or compounds, rather than simply being uniformly mixed in by means of the iron and carbon. Nickel, aluminum, and silicon are examples of the elements that form compounds in this AISI 4130 Eccentric Swaged Nipple. Few exact rules exist for selecting through – hardening or surface – hardening grades of our AISI 4130 Hex Nipple. While in a molten state, this AISI 4130 Steel Hexagon Reducing Nipple are exposed to a vacuum which removes hydrogen and, to a lesser degree, oxygen and nitrogen.

AISI 4130 Nipple
Specifications : ASTM A213 & ASME SA213
Size : 1/4″ NB TO 4″ NB
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Dimension : ASME 16.11, MSS SP-79, MSS SP-95, 83, 95, 97, BS 3799

AISI 4130 Nipple Chemical Composition

AISI 4130 Ni C Mo Mn Si Fe Cu S P Cr
0.50 max 0.28-0.33 0.15-0.25 0.40-0.60 0.15-0.35 97.3-98.22 – 0.025 MAX 0.035 MAX 0.80-1.10

AISI 4130 Nipple Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
0.28 2580 460 MPa 560 MPa 20 %

Equivalent Grades for AISI 4130 Nipple

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
AISI 4130 G41300 1.7218 – 25CrMo4 JIS G4105 BS 970 –

AISI 4130 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

AISI 4130 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

ANSI B 16.11 AISI 4130 Nipple Value Added Services

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-10-28T17:33:10+05:30May 4th, 2021|

SMO 254 Nipple Manufacturers In India

Sachiya Steel International is one of the pioneer supplier and exporter of SMO 254 Nipple, which is tested in sodium chloride solution in the presence of thiosulfate. It shows susceptibility to IGSCC, comparable to that of our SMO 254 Hexagon Reducing Nipple, only in sodium chloride and a much lower susceptibility in sulphuric acid and sodium chloride. It must be notice that the sensitization treatment provoked a noticeable modification on the mechanical characteristics of SMO 254 Hexagon Nipple.

The percentage elongation to fracture of the solubilized and sensitized our SMO 254 One End Threaded Nipple in different solutions is compared. In any case the ductility of sensitized SMO 254 Both End Threaded Nipple was hardly decreased. In sodium chloride in which no SCC was observed the percentage elongation to fracture decreased from 56.5 % in the solubilized to 32.9 % in the sensitized of our SMO 254 Concentric Swaged Nipple. SMO 254 Eccentric Swaged Nipple showed a high ultimate strength resistance, suggesting a hardening due to the precipitation of new phases at grain boundaries.

In fact, it is known that the addition of thiosulfate to sodium chloride solutions in our SMO 254 Hex Nipple stimulates the pitting corrosion and provokes SCC on different alloys. The addition of thiosulfate to sodium chloride shifted the pitting potential of sensitized Alloy 254 Hexagon Reducing Nipple towards negative potentials. The polarization curves showed that our Alloy 254 Hexagon Nipple was active in this solution.

SMO 254 Nipple
Specifications : ASTM A403 & ASME SA403
Size : 1/4″ NB TO 4″ NB
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Dimension : ASME 16.11, MSS SP-79, MSS SP-95, 83, 95, 97, BS 3799

SMO 254 Nipple Chemical Composition

SMO 254 Ni C Mo Mn Si Fe Cu S P Cr
17.5 – 18.5
 0.02 max 6 – 6.5
 1 max 0.8 max – 0.5 – 1 0.01 max 0.03 max 19.5 – 20.5

SMO 254 Nipple Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.0 g/cm3 1320-1390 ℃ 300 650 35 %

Equivalent Grades for SMO 254 Nipple

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS SIS GOST
SMO 254 S31254 1.4547 Z1 CNDU 20.18.06Az X1CrNiMoCuN20-18-7 – 2378 –

SMO 254 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SMO 254 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-01-03T18:29:16+05:30April 24th, 2021|

Alloy 20 Nipple Manufacture In India

Sachiya Steel International is one of the pioneer supplier & distributor in Alloy 20 Nipple, which provides highly safe and reliable operations. Our Alloy 20 Hexagon Reducing Nipple is steel that is alloyed with a variety of elements in total amounts between 1 % and 50 % by weight to improve its mechanical or physical properties. Alloying elements of this Alloy 20 Hexagon Nipple are added to achieve certain properties in the material.

As a guideline, alloying elements of our Alloy 20 One End Threaded Nipple are added in lower percentages (less than 5 %) to increase strength or hardenability. Alloying elements of this Alloy 20 Both End Threaded Nipple are also added in larger percentages (over 5 %) to achieve special properties, such as corrosion resistance or extreme temperature stability.

Also the alloying elements of our Alloy 20 Concentric Swaged Nipple tend to form carbides or compounds, rather than simply being uniformly mixed in with the iron and carbon. Nickel, aluminum, and silicon are examples of the elements that form compounds in this Alloy 20 Eccentric Swaged Nipple.

Few exact rules exist for selecting through – hardening or surface – hardening grades of our Alloy 20 Hex Nipple. In most cases, critical parts of this Carpenter 20 Hexagon Reducing Nipple are field tested to evaluate their performance. Our Carpenter 20 Hexagon Nipple is often specified when high strength is needed in moderate – to – large sections.

Alloy 20 Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ NB TO 4″ NB
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Dimension : ASME 16.11, MSS SP-79, MSS SP-95, 83, 95, 97, BS 3799

Incoloy® alloy 20 Nipple Chemical Composition

Grade C Mn Si S Cu Ni Cr Fe Mo P
Alloy 20 0.07 max 2.00 max 1.00 max 0.035 max 3.0-4.0 32.0-38.0 19.0-21.0 29.85 min* 2.0-3.0 0.045 max

Alloy 20 Nipple Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.1 g/cm3 1443 °C (2430 °F) Psi -80,000, MPa -551 Psi – 35,000, MPa – 241 30%

Equivalent Grades for Alloy 20 Nipple

STANDARD WERKSTOFF NR. UNS AFNOR EN
Alloy 20 2.4660 N08020 Z2NCUD31-20AZ NiCr20CuMo

Alloy 20 Nipple Application Industries

Off-Shore Oil Drilling Companies
Power Generation
Petrochemicals
Gas Processing
Specialty Chemicals
Pharmaceuticals
Pharmaceutical Equipment
Chemical Equipment
Sea Water Equipment
Heat Exchangers
Condensers
Pulp and Paper Industry

Incoloy® alloy 20 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-11-06T15:36:35+05:30April 24th, 2021|

Stainless Steel 904L Nipple Manufactures In India

Sachiya Steel International is one of the well-known manufacturing units for Stainless Steel 904L Nipple, which is quite ductile and forms easily. The addition of molybdenum and nitrogen in Stainless Steel 904L Hexagon Reducing Nipple implies more powerful processing equipment may be necessary when compared with the standard 304 / 304L grades. Segregation is less evident in Stainless Steel 904L Hexagon Nipple, and this material is normally welded using a filler metal of the same composition as the base metal and can even be welded without filler metal.

The cold work hardening rate of Stainless Steel 904L One End Threaded Nipple makes it less machinable than 410 and 304 stainless steels. With its highly alloyed chemistry — 25 % nickel and 4.5 % molybdenum, Stainless Steel 904L Both End Threaded Nipple provides good chloride stress corrosion cracking resistance, pitting and general corrosion resistance superior to 316L and 317L molybdenum enhanced alloys.

Stainless Steel 904L Nipple


 Stainless Steel 904L Concentric Swaged Nipple was originally developed to withstand environments containing dilute sulphuric acid. SS 904L Eccentric Swaged Nipple also offers good resistance to other inorganic acids such as hot phosphoric acid as well as most organic acids. 904L Stainless Steel Nipple is easily welded and processed by standard shop fabrication practices. The high content of alloying elements in SS 904L Nipple gives the alloy exceptionally good resistance to uniform corrosion. Grade 904L Nipple provides full resistance in such environments within the entire concentration range of 0 % to 100 %.

Stainless Steel 904L Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 904L Nipple Chemical Composition

Grade C Mn Si P S Cr MO Ni Cu
904L min. – – – – – 19.0 4.0-5.0 23.0 1.0
max. 0.20 2.0 1.0 0.045 0.035 23.0 28.0 2.0

Stainless Steel 904L Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
446 490 220 35 70-90 typical –

Equivalent Grades for 904L Stainless Steel Nipple

STANDARD WERKSTOFF NR. UNS JIS BS KS AFNOR EN
SS 904L 1.4539 N08904 SUS 904L 904S13 STS 317J5L Z2 NCDU 25-20 X1NiCrMoCu25-20-5

Stainless Steel 904L Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 904L Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-09T12:17:13+05:30April 22nd, 2021|Nipple|

Stainless Steel 446 Nipple Manufactures In India

Sachiya Steel International is one of the prominent suppliers and distributor of Stainless Steel 446 Nipple, which offers good resistance to polythionic acid stress corrosion cracking and is also encountered in oil refineries. These SS 446 Hexagon Reducing Nipple is the original “18 – 8” stainless and is produced in greater quantity than any other austenitic stainless steel.

Our Stainless Steel 446 Hexagon Nipple provides useful resistance to corrosion in many environments ranging from moderately reducing to moderately oxidizing. Through the controlled addition of nitrogen, it is common for this Stainless Steel 446 One End Threaded Nipple to meet the mechanical properties of 304 straight grades. Our Stainless Steel 446 Both End Threaded Nipple has slightly improved corrosion resistance over type 321 stainless steel in strongly oxidizing environments.

Stainless Steel 446 Nipple

This Stainless Steel 446 Concentric Swaged Nipple is stabilized with columbium and is preferable for aqueous and low temperature environments due to its good resistance to inter – granular attack. The high temperature oxidation resistance of our Stainless Steel 446 Eccentric Swaged Nipple is similar to that of stainless steel 304, which is useful to 1500 Degree F and also has good creep strength up to 1500 Degree F. These 446 Stainless Steel Nipple is an age – harden able iron base super – alloy for applications requiring high strength from -320 Degree Fahrenheit up to 1000 Degree Fahrenheit long time, 1300 Degree Fahrenheit – 1500 Degree Fahrenheit short time.

Stainless Steel 446 Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 446 Nipple Chemical Composition

Grade C Mn Si P S Cr MO Ni N
446 min. – – – – – 23.0 – – 0.10
max. 0.20 1.5 0.75 0.040 0.030 30.0 0.50 0.25

Stainless Steel 446 Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
446 485 275 20 92 201

Equivalent Grades for 446 Stainless Steel Nipple

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 446 1.4762 S44600 SUS 446 – – – –

Stainless Steel 446 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 446 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-09T12:31:19+05:30April 22nd, 2021|Nipple|

Stainless Steel 410 Nipple Manufacturers In India

Sachiya Steel International is one of the well-established exporter and seller of Stainless Steel 410 Nipple, which is used for highly stressed parts where a degree of corrosion resistance, strength and ductility are required. Stainless Steel 410 Hexagon Reducing Nipple may be used for steam turbine buckets, blades, bucket covers, gas turbine compressor blades, nuclear reactor control rod mechanisms, forged valves, fasteners, shafting, pump parts and machine parts.

Stainless Steel 410 Hexagon Nipple can be used up to 1200 Degree F (650 Degree C) where resistance to scaling is required, and readily hot worked by forging and upsetting. SS 410 One End Threaded Nipple may be readily forged, headed or upset, where it requires more blows or a heavier hammer than mild steel.

If tempering of Stainless Steel 410 Both End Threaded Nipple in this range is necessary to obtain the desired strength and ductility values, it may be that in many cases the reduced impact strength is not a problem and that the corrosion resistance is only slightly reduced. SS 410 Concentric Swaged Nipple should be heated uniformly to 2000 Degree F / 2200 Degree F (1095 Degree C / 1205 Degree C), depending upon the degree of deformation, then forged and air cooled. Large forgings should be furnace cooled or cooled in dry lime, and thus SS 410 Eccentric Swaged Nipple should not be forged below 1650 Degree F (900 Degree C).

Stainless Steel 410 Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 410 Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
410 min. – – – – – 11.5 – – –
max. 0.15 1.0 1.00 0.040 0.030 13.5 – 0.75 –

Stainless Steel 410 Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
410 480 275 16 95 201

Equivalent Grades for 410 Stainless Steel Nipple

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
410 S41000 410S21 56A 1.4006 X12Cr13 2302 SUS 410

Stainless Steel 410 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 410 Nipple Test Certificates

We at Sachiya Sachiya International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-26T12:27:19+05:30April 19th, 2021|

Stainless Steel 347H Nipple Manufacturers In India

Sachiya Steel International is one of the prominent exporting houses of Stainless Steel 347H Nipple, which serve as a very competitive alternative to expensive nickel alloys and high – alloy austenitic stainless steels in the most demanding applications, such as hot tropical seawater. In addition, Stainless Steel 347H Hexagon Reducing Nipple has only half the weight of steel. Our SS 347H Hexagon Nipple is non – magnetic and characterized by a high melting point, high strength – to – weight ratio and a low modulus of elasticity.

These Stainless Steel 347H One End Threaded Nipple is highly resistant to a wide range of acids and bases, both organic and inorganic, which makes it an interesting and exceptional long – life alternative to other materials in highly demanding applications. Our SS 347H Both End Threaded Nipple has very high resistance to chloride corrosion, combined with very high mechanical strength.

Many elements and compounds that are not normally classified as alloys under high pressures, these Stainless Steel 347H Concentric Swaged Nipple are formed as metallic allotropes of non – metals. The strength and resilience of our Stainless Steel 347H Eccentric Swaged Nipple has led to their frequent use in high – rise building and bridge construction, as well as most vehicles, many home appliances, tools, pipes, non – illuminated signs and railroad tracks. Painting, anodizing or plating are good ways to prevent corrosion of these 347H Stainless Steel Nipple.

Stainless Steel 347H Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 347H Nipple Chemical Composition

Grade C Mn Si P S Cr Cb Ni Fe
SS 347H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 20.00 8xC – 1.10 9.00 – 13.00 63.72 min

Stainless Steel 347H Nipple Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1454 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 347H Stainless Steel Nipple

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 347H 1.4961 S34709 SUS 347H – – – X6CrNiNb18-12

Stainless Steel 347H Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 347H Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-27T11:29:06+05:30April 19th, 2021|
LOGO 1200 X 300

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top