Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Inconel 600 Tube to Male Fittings in various sizes and dimensions, which has Carburization resistance and Oxidation resistance to 2000 Degree F. Heavy duty machining equipment and tooling in Inconel 600 Tube Fittings should be used to minimize chatter or work – hardening of the alloy ahead of the cutting. Besides heat – treating industries, Inconel 600 Compression Fittings is as well used in furnace component, aerospace, pulp and paper, chemical industries and nuclear engineering. Inconel 600 Compression Tube Fittings is a superior choice for: heat exchanger tubing and nuclear reactor vessels.
Typical corrosion applications of Inconel 600 Male Connector Fittings include titanium dioxide production (chloride route), vinyl chloride monomer (VCM), magnesium chloride, and perchloroethylene syntheses. Softening by annealing begins at about 1600 Degree F (871 Degree C), these Inconel 600 Ferrule Fittings is reasonably complete after 10 to 15 minutes of heating at 1800 Degree F (982 Degree C). Inconel 600 Double Ferrule Fittings is slightly more machinable compared to 304 stainless steel and should be performed by means of tools large enough to handle the loads.
Applications of Alloy 600 Tube Fittings include heaters, bubble towers, stills and condensers for processing of fatty acids. Alloy 600 Male Connector Fittings is combination of Nickel Chromium and Iron provides a standard material for the chemical industry and the automotive engine, aero – engine and airframe sectors.
Inconel 600 Tube to Male Fittings Specifications
Specifications
:
ASTM B366 ASME SB366
Tube Size
:
6mm to 38mm to 1/4″ to 1 1/2″
Thread
:
NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass
:
ASTM B16 ASTM B 453
Pressure Rating
:
6000PSI for Inconel, 300/1000/3000PSI for Brass
Inconel Alloy 600 Tube To Male Fittings Chemical Composition
Grade
C
Mn
Si
S
Cu
Fe
Ni
Cr
Inconel 600
0.15 max
1.00 max
0.50 max
0.015max
0.50 max
6.00 – 10.00
72.00 min
14.00 – 17.00
Inconel 600 Tube To Male Fittings Mechanical Properties
Element
Density
Melting Point
Tensile Strength
Yield Strength (0.2%Offset)
Elongation
Inconel 600
8.47 g/cm3
1413 °C (2580 °F)
Psi – 95,000 , MPa – 655
Psi – 45,000 , MPa – 310
40 %
Equivalent Grades for 600 Inconel Ferrule Fitting Tube To Male Fittings
STANDARD
WERKSTOFF NR.
UNS
JIS
BS
GOST
AFNOR
EN
Inconel 600
2.4816
N06600
NCF 600
NA 13
МНЖМц 28-2,5-1,5
NC15FE11M
NiCr15Fe
Alloy 600 Tube To Male Fittings Application Industries
Off-Shore Oil Drilling Companies
Power Generation
Petrochemicals
Gas Processing
Specialty Chemicals
Pharmaceuticals
Pharmaceutical Equipment
Chemical Equipment
Sea Water Equipment
Heat Exchangers
Condensers
Pulp and Paper Industry
Inconel 600 Tube To Male Fittings Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B, • Raw Materials Certificate • 100% Radiography Test Report • Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel Internationalensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area • Hardness Test • Chemical Analysis – Spectro Analysis • Positive Material Identification – PMI Testing • Flattening Test • Micro and Macro Test • Pitting Resistance Test • Flaring Test • Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code • Packing List including net weight and gross weight, number of boxes, Marks and Numbers • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy • Fumigation Certificates • Raw Material Test Reports • Material Traceability Records • Quality Assurance Plan (QAP) • Heat Treatment Charts • Test Certificates certifying NACE MR0103, NACE MR0175 • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 • Guarantee Letter • NABL approved Laboratory Test Reports • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR • Form A for the purposes of the Generalized System of Preferences (GSP)
Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Stainless Steel 316TI Tube to Male Fittings, which is а nісkеl – іrоn – сhrоmіum аustеnіtіс аllоу that wаs dеvеlореd for. The main intent when Stainless Steel 316Ti Tube Fittings was developed was for mахіmum rеsіstаnсе to асіd аttасk, sресіfісаllу Sulphur асіd. Stainless Steel 316TI Compression Fittings hаs ехсеllеnt rеsіstаnсе tо gеnеrаl соrrоsіоn, ріttіng, аnd сrеvісе соrrоsіоn іn сhеmісаls соntаіnіng сhlоrіdеs аnd sulfurіс, рhоsрhоrіс, аnd nіtrіс асіds. Stainless Steel 316Ti Male Connector Fittings аlsо соntаіns nіоbіum fоr stаbіlіzаtіоn аgаіnst sеnsіtіzаtіоn аnd rеsultаnt іntеrgrаnulаr соrrоsіоn. Stainless Steel 316Ti Compression Tube Fittings соmbіnеs ехсеllеnt соrrоsіоn rеsіstаnсе wіth еlеvаtеd mесhаnісаl рrореrtіеs аnd rеlаtіvеlу еаsу fаbrісаtіоn.
Stainless Steel 316TI Tube to Male Fittings Specifications
Specifications
:
ASTM A276 ASME SA 479
Tube Size
:
6mm to 38mm to 1/4″ to 1 1/2″
Thread
:
NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass
:
ASTM B16 ASTM B 453
Pressure Rating
:
6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
SS 316TI Tube To Male Fittings Chemical Composition
Grade
C
Mn
Si
P
S
Cr
Mo
Ni
N
SS 316TI
0.08 max
2 max
0.75 max
0.045 max
0.030 max
16.00 – 18.00
2.00 – 3.00
10.00 – 14.00
68.395 min
Stainless Steel 316TI Tube To Male Fittings Mechanical Properties
Density
Melting Point
Tensile Strength
Yield Strength (0.2%Offset)
Elongation
8.0 g/cm3
1399 °C (2550 °F)
Psi – 75000 , MPa – 515
Psi – 30000 , MPa – 205
35 %
Equivalent Grades for 316TI Stainless Steel Ferrule Fitting Tube To Male Fittings
STANDARD
WERKSTOFF NR.
UNS
JIS
BS
GOST
AFNOR
EN
SS 316TI
1.4571
S31635
SUS 316Ti
320S31
08Ch17N13M2T
Z6CNDT17‐123
X6CrNiMoTi17-12-2
SS 316TI Tube To Male Fittings Application Industries
Off-Shore Oil Drilling Companies
Power Generation
Petrochemicals
Gas Processing
Specialty Chemicals
Pharmaceuticals
Pharmaceutical Equipment
Chemical Equipment
Sea Water Equipment
Heat Exchangers
Condensers
Pulp and Paper Industry
Stainless Steel 316TI Tube To Male Fittings Test Certificates
We at Sachiya Steel Internationalprovide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B, • Raw Materials Certificate • 100% Radiography Test Report • Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area • Hardness Test • Chemical Analysis – Spectro Analysis • Positive Material Identification – PMI Testing • Flattening Test • Micro and Macro Test • Pitting Resistance Test • Flaring Test • Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code • Packing List including net weight and gross weight, number of boxes, Marks and Numbers • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy • Fumigation Certificates • Raw Material Test Reports • Material Traceability Records • Quality Assurance Plan (QAP) • Heat Treatment Charts • Test Certificates certifying NACE MR0103, NACE MR0175 • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 • Guarantee Letter • NABL approved Laboratory Test Reports • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR • Form A for the purposes of the Generalized System of Preferences (GSP)
Sachiya Steel Internationalis one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 316 Tube to Male Fittings, where minimum values of toughness are specified for different applications. Stainless Steel 316 Tube Fittings is possible for the magnetic permeability of austenitic steels to be changed during processing. For example, cold work and welding of Stainless Steel 316L Tube Fittings are liable to increase the amount of martensite and ferrite respectively in the steel. A familiar example of Stainless Steel 316 Compression Fittings is in a sink where the flat drainer has little magnetic response whereas the pressed bowl has a higher response due to the formation of martensite particularly in the corners.
In practical terms, Stainless Steel 316L Compression Fittings are used for “non-magnetic” applications, for example magnetic resonance imaging (MRI). Stainless Steel 316 Male Run Tee are extensively used for service down to as low as liquid helium temperature (-269 degree C). Stainless Steel 316L Male Connector Fittings is largely due to the lack of a clearly defined transition from ductile to brittle fracture in impact toughness testing.
Toughness of SS 316 Ferrule Fittings is measured by impacting a small sample with a swinging hammer, where the distance which the hammer swings after impact is a measure of the toughness. The shorter the distance, the tougher SS 316 Double Ferrule Fittings as the energy of the hammer is absorbed by the sample.
Stainless Steel 316/316L Tube to Male Fittings Specifications
Specifications
:
ASTM A276 ASME SA 479
Tube Size
:
6mm to 38mm to 1/4″ to 1 1/2″
Thread
:
NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass
:
ASTM B16 ASTM B 453
Pressure Rating
:
6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
SS 316/316L Tube To Male Fittings Chemical Composition
Grade
C
Mn
Si
P
S
Cr
Mo
Ni
N
SS 316
0.08 max
2 max
1.0 max
0.045 max
0.030 max
16.00 – 18.00
2.00 – 3.00
11.00 – 14.00
67.845 min
SS 316L
0.035 max
2 max
1.00 max
0.045 max
0.030 max
16.00 – 18.00
2.00 – 3.00
10.00 – 14.00
68.89 min
Stainless Steel 316/316L Tube To Male Fittings Mechanical Properties
Grade
Density
Melting Point
Tensile Strength
Yield Strength (0.2%Offset)
Elongation
SS 316
8.0 g/cm3
1400 °C (2550 °F)
Psi – 75000 , MPa – 515
Psi – 30000 , MPa – 205
35 %
SS 316L
8.0 g/cm3
1399 °C (2550 °F)
Psi – 75000 , MPa – 515
Psi – 30000 , MPa – 205
35 %
Equivalent Grades for 316/316L Stainless Steel Ferrule Fitting Tube To Male Fittings
STANDARD
WERKSTOFF NR.
UNS
JIS
BS
GOST
AFNOR
EN
SS 316
1.4401 / 1.4436
S31600
SUS 316
316S31 / 316S33
–
Z7CND17‐11‐02
X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L
1.4404 / 1.4435
S31603
SUS 316L
316S11 / 316S13
03Ch17N14M3 / 03Ch17N14M2
Z3CND17‐11‐02 / Z3CND18‐14‐03
X2CrNiMo17-12-2 / X2CrNiMo18-14-3
SS 316/316L Tube To Male Fittings Application Industries
Off-Shore Oil Drilling Companies
Power Generation
Petrochemicals
Gas Processing
Specialty Chemicals
Pharmaceuticals
Pharmaceutical Equipment
Chemical Equipment
Sea Water Equipment
Heat Exchangers
Condensers
Pulp and Paper Industry
Stainless Steel 316/316L Tube To Male Fittings Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B, • Raw Materials Certificate • 100% Radiography Test Report • Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area • Hardness Test • Chemical Analysis – Spectro Analysis • Positive Material Identification – PMI Testing • Flattening Test • Micro and Macro Test • Pitting Resistance Test • Flaring Test • Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code • Packing List including net weight and gross weight, number of boxes, Marks and Numbers • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy • Fumigation Certificates • Raw Material Test Reports • Material Traceability Records • Quality Assurance Plan (QAP) • Heat Treatment Charts • Test Certificates certifying NACE MR0103, NACE MR0175 • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 • Guarantee Letter • NABL approved Laboratory Test Reports • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR • Form A for the purposes of the Generalized System of Preferences (GSP)
Sachiya Steel Internationalis one of the Leading Manufacturer And Exporter of High Quality SMO 254 Socket Weld Fittings, which is an austenite steel. SMO 254 Forged Socket Weld Elbow Fittings offered feature high finish strength in comparison to 316L and 317L austenitic stainless steel as well as superior ductility and impact strength. Further, SMO 254 Forged Socket Weld Tee Fittings also come with higher resistance to abrasion, erosion as well as resistance to crevice corrosion in seawater. Even highly alloyed stainless steels such as SMO 254 Forged Socket Weld Cap Fittings have limited applicability in environments which have halide ions, e.g. chloride, bromide and fluoride solutions.
It is for this reason that SMO 254 Forged Socket Weld Coupling Fittings has often been necessary to use such expensive materials such as nickel based alloys or titanium for these environments. SMO 254 Forged Socket Weld Cross Fittings was developed with a view of offering a less expensive alternative to the conventional pricier alloys. With its high nitrogen content SMO 254 Forged Socket Weld Union Fittings has higher mechanical strength than most other austenitic stainless steels.
Similar to these, SMO 254 Forged Socket Weld Plug Fittings is characterized by high ductility and impact strength as well as good weldability. Some of the other properties of SMO 254 Forged Socket Weld Lateral Tee Fittings include high resistance to stress corrosion cracking, good resistance to erosion corrosion, low magnetic permeability and others.
SMO 254 Socket weld Fittings Specifications
Specifications
:
ASTM B564 & ASME B564
Size
:
1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
:
ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class
:
2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type
:
Socket weld Fittings
SMO 254 Forged Socket weld Fittings Chemical Composition
Grade
Ni
Cr
Mo
Cu
N
C
Mn
Si
P
S
SMO 254
17.5-18.5
19.5-20.5
6-6.5
0.5-1
0.18-0.22
0.02
1
.08
0.03
0.01
SMO 254 Socket weld Fitting Mechanical Properties
Density
Melting Point
Tensile Strength
Yield Strength (0.2%Offset)
Elongation
8.0 g/cm3
1320-1390 ℃
650
300
35 %
Equivalent Grades for 254 SMO Forged Socket weld Fittings
STANDARD
WERKSTOFF NR.
UNS
SIS
AFNOR
EN
SMO 254
1.4547
S31254
2378
Z1 CNDU 20.18.06Az
X1CrNiMoCuN20-18-7
SMO 254 Forged Socket weld Fittings Application Industries
Off-Shore Oil Drilling Companies
Power Generation
Petrochemicals
Gas Processing
Specialty Chemicals
Pharmaceuticals
Pharmaceutical Equipment
Chemical Equipment
Sea Water Equipment
Heat Exchangers
Condensers
Pulp and Paper Industry
SMO 254 Forged Socket weld Fittings Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B, • Raw Materials Certificate • 100% Radiography Test Report • Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area • Hardness Test • Chemical Analysis – Spectro Analysis • Positive Material Identification – PMI Testing • Flattening Test • Micro and Macro Test • Pitting Resistance Test • Flaring Test • Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code • Packing List including net weight and gross weight, number of boxes, Marks and Numbers • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy • Fumigation Certificates • Raw Material Test Reports • Material Traceability Records • Quality Assurance Plan (QAP) • Heat Treatment Charts • Test Certificates certifying NACE MR0103, NACE MR0175 • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 • Guarantee Letter • NABL approved Laboratory Test Reports • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR • Form A for the purposes of the Generalized System of Preferences (GSP)
Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Copper Socket Weld Fittings, which are precisely – engineered by our experts using high quality steel, which are in fact made from the reliable experts of the market. We are one of the topmost known trusted names in market that offer these Copper Socket Weld Elbow Fittings, where we have been able to meet varied requirements of patrons in prompt manner. The Air Conditioning Copper Socket Weld Tee Fittings that we manufacture are extensively used in Air conditioning systems. We are passionately engaged in offering an extensive range of these Copper Socket Weld Cap Fittings, which are manufactured from optimum quality material in complete compliance with international quality standards.
According to the requirements of our customers, we are involved in offering a fine quality Copper Socket Weld Coupling Fittings. Having vast experience in this domain, we are engaged in offering these elegantly designed Copper Socket Weld Cross Fittings in the market. Our Copper Socket Weld Union Fittings are often used for Writing Instrument, CNG / LPG Kit Industries, Water Lines, Plumbing & Home Application office Accessories & etc.
These Copper Socket Weld Plug Fittings are also used for Sanitation, Hot and Cold Water, Industrial & Medical Gas Transportation, Various Engineering, where further we are also engaged in providing HVAC Installation Work and Ducting Work to our valuable clients.
Copper Socket weld Fittings Specifications
Specifications
:
ASTM B62 & ASME B62
Size
:
1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
:
ASME 16.15, MSS SP-79, 83, 95, 97, BS 3799
Class
:
2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type
:
Socket weld Fittings
Copper Forged Socket weld Fittings Chemical Composition
Copper Forged Socket weld Fittings Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B, • Raw Materials Certificate • 100% Radiography Test Report • Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel Internationalensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area • Hardness Test • Chemical Analysis – Spectro Analysis • Positive Material Identification – PMI Testing • Flattening Test • Micro and Macro Test • Pitting Resistance Test • Flaring Test • Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code • Packing List including net weight and gross weight, number of boxes, Marks and Numbers • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy • Fumigation Certificates • Raw Material Test Reports • Material Traceability Records • Quality Assurance Plan (QAP) • Heat Treatment Charts • Test Certificates certifying NACE MR0103, NACE MR0175 • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 • Guarantee Letter • NABL approved Laboratory Test Reports • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR • Form A for the purposes of the Generalized System of Preferences (GSP)
Sachiya Steel Internationalis one of the Leading Manufacturer And Exporter of High Quality stainless steel pipe, we stock over 600 tons in ss seamless and welded pipes. Sachiya Steel International is one of the largest stainless steel pipe supplier in India. Our stainless steel products include stainless steel seamless tube, stainless steel welded tube, ss seamless pipe and ss welded pipe. We supply a large variety of grades in size range of 6mm OD to 610mm OD, with thickness upto 30mm. We manufacture large diameter fabricated stainless steel pipes, high wall thick stainless steel pipes and thin walled stainless steel tubings.
The elements used in the manufacture of any grade Stainless Steel Pipes improves its longevity along with enhancing several of its properties such as corrosion resistance, increased tensile strength & durability. Therefore various grade Stainless Steel Welded Pipes such as alloys 304, 316, 310 etc are used in highly demanding applications involving industries like water, marine, pulp and paper industry, chemical processing, oil and gas, petrochemicals etc.
When alloy grade 316 is used in the manufacture of ASTM A312 Stainless Steel boiler pipes, the resultant pipe can be used in not only high temperature applications, but also general corrosive service. This is because grade 316 electropolished stainless steel pipes has improved resistance to corrosion and is often referred to as a marine grade stainless steel alloy. stainless steel pipe manufacturers in India ,On the other hand, those applications which are less demanding can use alloy grade 304, which although is known to have advantageous properties, is not as good at resisting corrosion in comparison to its austenitic counterpart grade 316 Stainless Steel Pipe.
Stainless Steel Pipe Specifications
Product
Stainless Steel Pipes
Type
Seamless, Welded, ERW, 100% X Ray Welded
Size OD (mm)
6.00 to 610.00
Thickness (mm)
0.5mm to 30mm
Length (mm)
6000, 3000, 2000, 12000, Custom Length
Finish
Annealed & Pickled, 2B, No.4, Mirror, Polish
Packing
Bundled Packing
Services
Cutting, Beveling, Threading, Polishing
Sachiya Steel International provides ex-stock supply of stainless steel seamless pipes per ASTM A312 in 304/304L, 316/316L/316Ti, 3
21H, SS347H, 317L, 904L and SS446 among other special grades. 304/304L stainless steel pipes/tubes and 316/316L stainless steel pipes/tubes are readily available in all standard pipe sizes and schedules including Sch 5, Sch 10, Sch 40s and Sch 80s. Stainless steel seamless tubes are available in compliance with ASTM A213 and ASTM A269 in common grades of such as 304/304L and 316/316L in standard tube sizes and wall thicknesses. We stainless steel pipe manufacturers in India ,We can offer custom size cold drawn stainless steel pipes and stainless steel tubes to our customers. Generally stainless steel pipes and stainless steel tubes are available in standard OD or NB sizes. However, with our tube processing capabilities we can offer any custom size outside diameter and thickness to our customers.
Stainless Steel Welded Pipes & Tubes
Sachiya Steel International provides ex-stock supply of stainless steel welded pipes in accordance with ASTM A312 in common grades such as 304/304L and 316/316L in standard pipe sizes and schedules including Sch 5, Sch 10, Sch 40s and Sch 80s. We stainless steel pipe manufacturers in India , Sachiya Steel International in the supply of 100% X-Ray Welded custom sizes large diameter fabricated stainless steel pipes. All custom fabricated stainless steel pipe products are accompanied with X-Ray reports and chemical and physical properties certification from NABL approved labs. Specialty testing, including Hydro Testing, Destructive Test, and Non Destructive Test reports can be supplied upon customer request.
Stainless Steel Pipes, Stainless Steel Tubes Testing & Value Added Processing Services from Sachiya Steel International
Stainless Steel Pipe Polishing
Stainless Steel Pipe Beveling
Heat Treatment, Annealing, Pickling
Ultrasonic Testing
100% X-Ray Welding for Large Diameter Custom Size Stainless Steel Pipes
Tube Processing
Special Testing Requirements – Destructive Testing, Non Destructive Testing etc.
Type
Description
USA FOB Price
Malaysia FOB Price
Europe FOB Price
Singapore FOB Price
Saudi Arabia (KSA) FOB Price
Unit Per mtr
Unit Per mtr
Unit Per mtr
Unit Per mtr
Unit Per mtr
SS 304 Seamless Pipe
Size : 6″NB x SCH.80S
US $
105.85
Malaysia Ringgit
430.81
Euro
88.91
Singapore Dollar
141.84
Saudi Riyal
396.94
SS 304 Welded Pipe
Size : 10″NB x SCH.10S
US $
66.7
Malaysia Ringgit
271.47
Euro
56.03
Singapore Dollar
89.38
Saudi Riyal
250.13
310S Stainless Steel Pipe / tube
Size : 2″ OD x 2.11mm Thk
US $
14.04
Malaysia Ringgit
57.14
Euro
11.79
Singapore Dollar
18.81
Saudi Riyal
52.65
310 Stainless Steel Pipe/ Tubing
Size : 2.1/2″ OD x 2.5mm Thk
US $
20.62
Malaysia Ringgit
83.92
Euro
17.32
Singapore Dollar
27.63
Saudi Riyal
77.33
317L Stainless Steel Pipe
Size : 3″NB x SCH.40S
US $
85.15
Malaysia Ringgit
346.56
Euro
71.53
Singapore Dollar
114.10
Saudi Riyal
319.31
321 Stainless Steel Pipe
Size : 8″NB x SCH.80S
US $
203.91
Malaysia Ringgit
829.91
Euro
171.28
Singapore Dollar
273.24
Saudi Riyal
764.66
347H Stainless Steel Pipe
Size : 3″NB x SCH.XXS
US $
151.85
Malaysia Ringgit
618.03
Euro
127.55
Singapore Dollar
203.48
Saudi Riyal
569.44
410 Stainless Steel Pipe
Size : 8″NB x SCH.10S
US $
32.91
Malaysia Ringgit
133.94
Euro
27.64
Singapore Dollar
44.10
Saudi Riyal
123.41
446 Stainless Steel Pipe
Size : 12″NB x SCH.10S
US $
66.65
Malaysia Ringgit
271.27
Euro
55.99
Singapore Dollar
89.31
Saudi Riyal
249.94
We stainless steel pipe manufacturers in India ,The elements used in the manufacture of any grade Stainless Steel Pipes improves its longevity along with enhancing several of its properties such as corrosion resistance, increased tensile strength & durability. Therefore various grade Stainless Steel Welded Pipes such as alloys 304, 316, 310 etc are used in highly demanding applications involving industries like water, marine, pulp and paper industry, chemical processing, oil and gas, petrochemicals etc.
When alloy grade 316 is used in the manufacture of ASTM A312 Stainless Steel boiler pipes, the resultant pipe can be used in not only high temperature applications, but also general corrosive service. This is because grade 316 electropolished stainless steel pipes has improved resistance to corrosion and is often referred to as a marine grade stainless steel alloy. On the other hand, those applications which are less demanding can use alloy grade 304, which although is known to have advantageous properties, is not as good at resisting corrosion in comparison to its austenitic counterpart grade 316 Stainless Steel Pipe.
However, it is important to note that due to its affordability as well as enhanced properties, the specified grade 304 ASME B36.19 stainless steel pipes are quite versatile and is considered to be very popular choice of metal in many applications. For instance, in the food industry, particularly the dairy industry uses stainless steel dairy pipes in the processing of acid containing items such as milk. Additionally, the factory uses high temperatures to treat these food groups followed by rapid cooling. Hence this alloy grade 304 or grade 316 ASTM A312 specified high temperature stainless steel seamless pipes needs to be able to withstand both high as well as low temperature settings. To learn more about the price of ASTM A731 Stainless Steel elliptical pipes, you can click the link given here.
Sachiya Steel International is one of the premier quality stainless steel pipe manufacturer in India. We strive to provide customer satisfaction by implementing Quality Management System and continual improvements in products, processes and systems.
Stainless Steel Welded Pipe Manufacturer In India
We stainless steel pipe manufacturers in India, Stainless Steel welded pipe is a long coiled ribbon of steel called skelp. The skelp is cut to the desired length, resulting in a flat rectangular sheet. The shorter ends of sheet’s width become the pipes outside circumference and to calculate it’s eventual outside diameter that value can be used And for forming a cylinder rectangular sheets are fed through a rolling machine that curls the longer sides up toward one another. Stainless Steel erw pipes are manufactured by high-frequency or low-frequency resistance. With longitudinal welds the round pipes are welded from steel plates. It plays an important position in the field of transportation pipes in the world. ERW steel pipes are used to transport natural gas, oil, and other vapour-liquid objects, and also it can meet various requirements of high and low pressure. astm a312 welded pipe contains chromium which gives corrosion resistance properties at high temperature.
It can with stand corrosive or chemical environments. It has excellent forming, toughness and welding characteristic. ASTM A312 pipes are commonly used in demanding equipment like food processing, automobiles, oil and gas processing, water treatment facilities, refinery and petrochemicals, breweries and energy industries. You can buy Large diameter stainless steel welded pipe in above 457 mm and 508 mm from any supplier in India. The diameter of pipe which is larger than its OD is known as large diameter pipe. It plays an important role in oil and gas transmissions. It is used a lot for long distances pipeline projects, since it could carry more liquid and with big flow rate. View SCH 40 Pipe Dimensions in mm.
Other relevant products of Stainless Steel Pipe
stainless steel pipe manufacturers in India, ASTM A790 Stainless Steel high pressure pipe traders, Martensitic Stainless Steel large diameter pipe exporter in Mumbai. Super Ferritic Stainless Steel oval pipe, ANSI B36.19 Stainless Steel pipe manufacturers in India, compare our price with Jindal Stainless Steel pipe price list.
Stainless Steel Seamless Pipes
Schedule 10 Stainless Steel Pipes
Stainless Steel Welded Pipes
3 Inch Stainless Steel Pipes
Stainless Steel Erw Pipes
4 Inch Stainless Steel Pipes
Mirror Finish Stainless Steel Pipes
Large Diameter Stainless Steel Pipes
Mirror Polished Stainless Steel Pipes
Large Diameter Seamless Stainless Steel Pipes
Brushed Stainless Steel Pipes
Nsf 61 Certified Stainless Steel Pipes
Corrugated Stainless Steel Pipes
Nfpa 13 Stainless Steel Pipes
Double Wall Stainless Steel Pipes
Oval Shaped Stainless Steel Pipes
Dn100 Stainless Steel Pipes
Polished Stainless Steel Pipes
Efw Stainless Steel Pipes
Thin Wall Stainless Steel Pipes
Electropolished Stainless Steel Pipes
Stainless Steel Hollow Pipes
Stainless Steel Elliptical Pipes
Stainless Steel Round Pipes
Schedule 40 Stainless Steel Pipes
Seamless SS Transmission Pipes
SS Seamless Oil and gas Pipes
Stainless Steel precision Pipes
ASME B36.19 Stainless Steel Pipe Size Chart
Manufacturer of EN 10217-7 Stainless Steel round pipe, Best quality Stainless Steel pipe and Chromium Nickel Stainless Steel ornamental pipe, Check Martensitic Stainless Steel rectangular pipe & Schedule 40 Stainless Steel electropolished Pipe sizes.
Dia NPS
OUTSIDE DIAMETER(Milimeter)
SCH-5S WALL THICKNESS(Milimeter)
SCH-10S WALL THICKNESS(Milimeter)
SSCH-40S WALL THICKNESS(Milimeter)
3/8
17.15
1.65
2.31
5
141.30
2.77
3.40
6.55
3/4
26.67
1.65
2.11
2.87
1
33.40
1.65
2.77
3.38
1 1/4
42.16
1.65
2.77
3.56
1 1/2
48.26
1.65
2.77
3.68
4
114.30
2.11
3.05
6.02
2
60.33
1.65
2.77
3.91
2 1/2
73.03
2.11
3.05
5.16
1/2
21.34
1.65
2.11
2.77
3
88.90
2.11
3.05
5.49
3 1/2
101.60
2.11
3.05
5.74
1/4
13.72
1.65
2.24
6
168.28
2.77
3.40
7.11
8
219.08
2.77
3.76
8.18
10
273.05
3.40
4.19
9.27
12
323.85
3.96
4.57
9.53
14
355.60
3.96
4.78
9.53
24
609.60
5.54
6.35
9.53
16
406.40
4.19
4.78
9.53
18
457.20
4.19
4.78
9.53
20
508.00
4.78
5.54
9.53
22
558.80
4.78
5.54
30
762.00
6.35
7.92
32|
80
812.8|
2032.0
(Thickness)：6.35~30mm
Nominal diameter and wall thickness subject to the approval of vendor and purchaser
Production, Supply, Stock Range of Stainless Steel Pipes and Stainless Steel Tubes
Single Random, Double Random & Required Length End: Plain End, Beveled End, Treaded
End Protection
Plastic Caps
Surface Finish:
2B, No.4, No.1, No.8 Mirror Finish for Stainless Steel Pipes, Finish as per customer Requirements
Delivery Condition
Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Inspection, Test Reports
Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports
Packing
Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Specials
Sizes and Specifications other than above can be manufactured on request
Chemical Composition of Stainless Steel Pipes, as per ASTM A312 Manufacturing Standard
The below table shows the chemical composition of the most used A312 Stainless Steel Pipes:
A312 GRADES
UNS
C
Mn
P
S
Si
Cr
Ni
Mo
Ti
Nb
N
TP304
S30400
0.08
2
0.045
0.03
1
18.0-20.0
8.0-11.0
TP304L
S30403
0.035
2
0.045
0.03
1
18.0-20.0
8.0-13.0
TP304H
S30409
0.04-0.10
2
0.045
0.03
1
18.0-20.0
8.0-11.0
TP304N
S30451
0.08
2
0.045
0.03
1
18.0-20.0
8.0-18.0
0.10-0.16
TP304LN
S30453
0.035
2
0.045
0.03
1
18.0-20.0
8.0-12.0
0.10-0.16
TP309S
S30908
0.08
2
0.045
0.03
1
22.0-24.0
12.0-15.0
0.75
TP309H
S30909
0.04-0.10
2
0.045
0.03
1
22.0-24.0
12.0-15.0
TP309Cb
S30940
0.08
2
0.045
0.03
1
22.0-24.0
12.0-16.0
0.75
10xC min
1.10 max
TP309HCb
S30941
0.04-0.10
2
0.045
0.03
1
22.0-24.0
12.0-16.0
0.75
10xC min
1.10 max
TP310S
S3108
0.08
2
0.045
0.03
1
24.0-26.0
19.0-22.0
0.75
TP310H
S3109
0.04-0.10
2
0.045
0.03
1
24.0-26.0
19.0-22.0
TP310Cb
S31040
0.08
2
0.045
0.03
1
24.0-26.0
19.0-22.0
0.75
10xC min
1.10 max
TP310HCb
S31041
0.04-0.10
2
0.045
0.03
1
24.0-26.0
19.0-22.0
0.75
10xC min
1.10 max
TP316
S3160
0.08
2
0.045
0.03
1
16.0-18.0
11.0-14.0
2.0-3.0
TP316L
S31603
0.035
2
0.045
0.03
1
16.0-18.0
10.0-14.0
2.0-3.0
TP316H
S31609
0.04-0.10
2
0.045
0.03
1
16.0-18.0
11.0-14.0
2.0-3.0
TP316Ti
S31635
0.08
2
0.045
0.03
0.75
16.0-18.0
10.0-14.0
2.0-3.0
5x
0.1
(C-N)
-0.7
TP316N
S31651
0.08
2
0.045
0.03
1
16.0-18.0
10.0-14.0
2.0-3.0
0.10-0.16
TP316LN
S31653
0.035
2
0.045
0.03
1
16.0-18.0
11.0-14.0
2.0-3.0
0.10-0.16
TP317
S3170
0.08
2
0.045
0.03
1
18.0-20.0
10.0-14.0
3.0-4.0
TP317L
S31703
0.035
2
0.045
0.03
1
18.0-20.0
11.0-15.0
3.0-4.0
TP321
S3210
0.08
2
0.045
0.03
1
17.0-19.0
9.0-12.0
0.1
TP321H
S32109
0.04-0.10
2
0.045
0.03
1
17.0-19.0
9.0-12.0
0.1
TP347
S3470
0.08
2
0.045
0.03
1
17.0-19.0
9.0-13.0
TP347H
S34709
0.04-0.10
2
0.045
0.03
1
17.0-19.0
9.0-13.0
TP347LN
S34751
0.05-0.02
2
0.045
0.03
1
17.0-19.0
9.0-13.0
0.20-
0.06-0.10
50
TP348
S3480
0.08
2
0.045
0.03
1
17.0-19.0
9.0-13.0
TP348H
S34809
0.04-0.10
2
0.045
0.03
1
17.0-19.0
9.0-13.0
Mechanical Properties of Stainless Steel Pipes, as per ASTM A312
ASTM A312 Mechanical Properties
Material
Heat
Temperature
Tensile Strength
Yield Strength
Elongation %, Min
Treatment
Min.
Ksi (MPa), Min.
Ksi (MPa), Min.
º F(º C)
TP304
Solution
1900 (1040)
75(515)
30(205)
35
TP304L
Solution
1900 (1040)
70(485)
25(170)
35
TP304H
Solution
1900 (1040)
75(515)
30(205)
35
TP310S
Solution
1900 (1040)
75(515)
30(205)
35
TP316
Solution
1900(1040)
75(515)
30(205)
35
TP316L
Solution
1900(1040)
70(485)
25(170)
35
TP316H
Solution
1900(1040)
75(515)
30(205)
35
TP316Ti
Solution
1900(1040)
75(515)
30(205)
35
TP321
Solution
1900(1040)
75(515)
30(205)
35
TP321H
Solution
Cold: 2000(1100)
75(515)
30(205)
35
Hot: 1925(1050)
TP347
Solution
1900(1040)
75(515)
30(205)
35
TP347H
Solution
Cold: 2000(1100)
75(515)
30(205)
Hot: 1925(1050)
Dimensions of Welded and Seamless Stainless Steel Pipe
NPS
Outside Diameter
Nominal Wall Thickness
Designator
in.
mm
Schedule 5S
Schedule 10S
Schedule 40S
Schedule 80S
in.
mm
in.
mm
in.
mm
in.
mm
1/8
0.41
10.29
…
…
0.049
1.24
0.068
1.73
0.095
2.41
1/4
0.54
13.72
…
…
0.065
1.65
0.088
2.24
0.119
3.02
3/8
0.68
17.15
…
…
0.065
1.65
0.091
2.31
0.126
3.2
1/2
0.84
21.34
0.065
1.65
0.083
2.11
0.109
2.77
0.147
3.73
3/4
4.05
26.67
0.065
1.65
0.083
2.11
0.113
2.87
0.154
3.91
1
1.32
33.4
0.065
1.65
0.109
2.77
0.133
3.38
0.179
4.55
1 1/4
1.66
42.16
0.065
1.65
0.109
2.77
0.14
3.56
0.191
4.85
1 1/2
1.90
48.26
0.065
1.65
0.109
2.77
0.145
3.68
0.2
5.08
2
2.38
60.33
0.065
1.65
0.109
2.77
0.154
3.91
0.218
5.54
2 1/2
2.88
73.03
0.083
2.11
0.12
3.05
0.203
5.16
0.276
7.01
3
3.50
88.9
0.083
2.11
0.12
3.05
0.1216
5.49
0.3
7.62
3 1/2
4.00
101.6
0.083
2.11
0.12
3.05
0.226
5.74
0.318
8.08
4
4.50
114.3
0.083
2.11
0.12
3.05
0.237
6.02
0.337
8.56
5
5.56
141.3
0.10*9
2.77
0.134
3.4
0.258
6.55
0.375
9.52
6
6.63
168.28
0.10*9
2.77
0.134
3.4
0.28
7.11
0.432
10.97
8
8.63
219.08
0.109
2.77
0.148
3.76
0.322
8.18
0.5
12.7
10
10.75
273.05
0.134
3.4
0.165
4.19
0.365
9.27
0.5
12.7
12
12.75
323.85
0.156
3.96
0.18
4.57
0.375
9.52
0.5
12.7
14
14.00
355.6
0.156
3.96
0.188
4.78
…
…
…
…
16
16.00
406.4
0.165
4.19
0.188
4.78
…
…
…
…
18
18.00
457.2
0.165
4.19
0.188
4.78
…
…
…
…
20
20.00
508
0.188
4.78
0.188
4.78
…
…
…
…
22
22.00
558.8
0.188
4.78
0.218
5.54
…
…
…
…
24
24.00
609.6
0.218
5.54
0.25
6.35
…
…
…
…
30
30.00
762
0.25
6.35
0.312
7.92
…
…
…
…
Outside Diameter Tolerance of Stainless Steel Pipes
NPS
ASTM A312 OD Tolerance
+
–
inch
mm
inch
mm
1/8~1 1 /2
1/64(0.015)
0.4
1/32(0.031)
0.8
> 1 1 /2~4
1/32(0.031)
0.8
1/32(0.031)
0.8
> 4~8
1/16(0.062)
1.6
1/32(0.031)
0.8
> 8~18
3/32(0.093)
2.4
1/32(0.031)
0.8
> 18~26
1/8(0.125)
3.2
1/32(0.031)
0.8
> 26~34
5/32(0.156)
4
1/32(0.031)
0.8
> 34~48
3/16(0.187)
4.8
1/32(0.031)
0.8
Wall Thickness Tolerance of Stainless Steel Pipes
NPS
ASTM A312 WT Tolerance, %
+
–
1/8-2 1 /2
20
12.5
3~18, t/D≤ 5%
22.5
12.5
3~18, t/D> 5%
15
12.5
≥ 20, welded
17.5
12.5
≥ 20, seamless, t/D≤ 5%
22.5
12.5
≥ 20, seamless, t/D> 5%
15
12.5
Premier Stainless Steel Tube Manufacturers in India -Sachiya Steel International
Improve your projects with the superior quality of Sachiya Steel International, a trailblazing name among stainless steel tube manufacturers in India. Our commitment to outstanding quality and cutting-edge solutions is unrivalled, and we have a solid reputation as a premier SS tube manufacturer in India. With modern production facilities that pioneer the industry in producing a wide range of stainless steel tubes, Sachiya Steel International takes fulfilment in providing them.
Sachiya Steel International, a reputable ss tube manufacturer in India goes above and beyond expectations. Our extensive selection of precisely made ss tubes is known for its remarkable toughness, corrosion resistance, and dimensional perfection. We serve a variety of industries as one of the top producers of stainless steel tubes in India, providing solutions compliant with high international standards. To give our clients a competitive edge for their projects, in addition to receiving stainless steel tubes, we consistently push the boundaries of innovation.
Rely on Sachiya Steel International’s reputation for dependability. Renowned as a top-tier SS tube manufacturers in India, our wide selection of stainless steel tubes reflects our commitment to superior quality. In addition to providing stainless steel tubes, we also create enduring relationships. Beyond being a mere supplier of stainless steel tubes, we forge lasting partnerships. We contribute to the nation’s industrial growth story while keeping an eye on the world markets and a heart firmly planted in India. Choose Sachiya Steel International for stainless steel tubes that are the epitome of perfection because of their precision, honesty, and superiority.
ASTM A312: Seamless and straight-seam welded austenitic pipe intended for high temperature and general corrosive service. Filler metal not permitted during welding.
ASTM A358: Electric fusion welded austenitic pipe for corrosive and/or high temperature service. Typically only pipe up to 8 inch is produced to this specification. Addition of filler metal is permitted during welding.
ASTM A790: Seamless and straight-seam welded ferritic/austenitic (duplex) pipe intended for general corrosive service, with a particular emphasis on resistance to stress corrosion cracking.
ASTM A409: Straight-seam or spiral-seam electric fusion welded large diameter austenitic light-wall pipe in sizes 14” to 30” with walls Sch5S and Sch 10S for corrosive and/or high
ASTM A376: Seamless austenitic pipe for high temperature applications.
ASTM A813: Single-seam, single- or double- welded austenitic pipe for high temperature and general corrosive applications.
ASTM A814: Cold-worked welded austenitic pipe for high temperature and general corrosive service.
Sr. No.
Description
Sizes
Thickness
Price/Kg in Rs.
Price in US$/kg
Stainless Steel Seamless Pipes
Domestic Sales to India
Export Price
1
ASTM A312 TP 304 Seamless Pipes
11/2″ to 4″
SCH 10 & SCH 40
270
3.5
2
ASTM A312 TP 304 Seamless Pipes
1″
SCH 10 & SCH 40
295
3.40
3
ASTM A312 TP 304 Seamless Pipes
6″
SCH 10 & SCH 40
310
4.30
4
ASTM A312 TP 316L Seamless Pipes
11/2″ to 4″
SCH 10 & SCH 40
360
4.95
5
ASTM A312 TP 316L Seamless Pipes
1″
SCH 10 & SCH 40
390
5.40
Stainless Steel Welded/ERW Pipes
1
ASTM A312 TP 304 ERW Pipes
1″ to 4″
SCH 10 & SCH 40
195
2.90
2
ASTM A312 TP 304 ERW Pipes
6″
SCH 10 & SCH 40
220
3.20
3
ASTM A312 TP 316L ERW Pipes
1″ to 4″
SCH 10 & SCH 40
290
4.20
4
ASTM A312 TP 316L ERW Pipes
6″
SCH 10 & SCH 40
320
4.70
Stainless Steel Polished Pipes, 600 Grit
1
ASTM A554 304 Pipes
1″ to 3″
1.2mm, 1.5mm
200
2.95
2
ASTM A554 201 Pipes
1″ to 3″
1.2mm, 1.5mm
140
1.85
3
ASTM A554 316 Pipes
1″ to 3″
1.2mm, 1.5mm
305
4.30
Some of the major locations we have supplied ss seamless and welded pipes
Products
We supplied to following Locations
40 mm NB, SS Seamless Pipe, Schedule 40
Indonesia, Dammam -KSA, Philippines, Belgium
Ferritic martensitic steel seamless pipes
France, Qatar, Europe, Thailand
50mm ASTM A 312 Stainless Steel Seamless Pipe
Germany, Czechia, Thailand, Malaysia
Jindal/ Tata Make Schedule 40 Seamless Pipes
USA, Malaysia, Bangladesh, Finland
ASTM A269 Seamless Pipe
Saudi Arabia (KSA), South Africa, Kuwait, Brazil
SS ERW and Seamless Pipes
South Africa, Singapore, Bahrain
BE 18″ SCH STD, ASME B 36.19M Stainless Steel Seamless Pipe
Australia, Philippines, UK, Nigeria
Stainless steel pipe for chilled water, ANSI B36.19
Buy from stainless steel welded pipe manufacturer in India to ensure high quality at better price, also you can save the wastage if buy the exact sizes
Aerospace
Appliance
Architectural
Automotive
Blow Molding
Chemical
Computer
Construction
Defense
Fasteners
Flat Bar
Foam Molding
Food & Dairy
Food Processing
Furniture
General Industrial
Hydraulic tube
Injection Molding
Machine
Marine
Medical
Motor Sports
Oil & Gas
Railroad
RIM Molding
Screw
Sheet Metal
Storage Tanks
Transportation
Truck
Truck & Trailer
Uncategorized
Vacuum Molds
Stainless Steel Pipe Chemical composition
General queries of our customers about Stainless Steel Seamless Pipes
What is the minimum diameter and maximum size in seamless pipe? Ans: Minimum OD: 16 inch, 406.4 mm Maximum OD: 20 inch, 508 mm
What is the price difference between Seamless & Welded Pipe in India? Ans: Seamless steel pipe cost is almost 40-50% higher compared to the welded pipes due to manufacturing process & raw material, click here to view the updated Stainless Steel Seamless Pipe Price List.
What is the maximum pressure of SCH40 Seamless Pipes? Ans: Pressure rating depends upon sizes, wall thickness & temperature. For example: 1″ SCH40 WT 0.133, 100°F = 2205 PSi 10″ SCH40 WT 0.365, 100°F = 699 Psi
Why in high pressure applications SS Seamless Pipe is preferred? Ans: Welded pipe can be cracked on high pressure while Seamless Pipes can withstand extremely high pressure without cracking. So seamless pipe can take 20% higher pressure compared to welded.
What is the weight difference between Welded and Seamless Pipe? Ans: The welded pipe is 30% heavier compared to seamless pipe because of welding of HR coil, don’t forget to check SS Pipe Weight Chart.
Sachiya Steel International is one of the leading Manufacturer And Exporter of Carbon Steel A105 Threaded Forged Fittings, which is characterized by very good resistance in chloride containing media. Electric arc welding processes is suitable for ASTM A105 Carbon Steel Forged Threaded Elbow Fittings, though oxyacetylene welding is not recommended due to the possibility of carbon pick up in the weld area. ASME SA 105 Carbon Steel Forged Threaded Tee Fittings is corrosion resistant austenitic – ferrite steel for applications where conventional grades do not meet the corrosion requirements. ASTM A105 Carbon Steel Forged Threaded Cross Fittings is especially designed for service in aggressive chloride – containing environments and has additions of W and Cu compared to other steels.
ASME SA 105 Carbon Steel Forged Threaded Cap Fittings has very good resistance to localized corrosion and stress corrosion cracking in combination with high mechanical strength. ASTM A105 Carbon Steel Forged Threaded Bend Fittings tightly controls the chemistry and production in strict accordance with the requirements of our in-house specifications which are tighter than standard ASTM specifications.
Sachiya Steel International is one of the well – known stockiest and trader of ASME SA 105 Carbon Steel Forged Threaded Coupling Fittings, where welding procedures are similar to those applied for such conventional steel. This ensures a consistent quality product of ASTM A105 Carbon Steel Forged Threaded Union Fittings is produced with optimal corrosion resistance and chirpy impact toughness.
Carbon Steel A105 Threaded Forged Fittings Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B, • Raw Materials Certificate • 100% Radiography Test Report • Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area • Hardness Test • Chemical Analysis – Spectro Analysis • Positive Material Identification – PMI Testing • Flattening Test • Micro and Macro Test • Pitting Resistance Test • Flaring Test • Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code • Packing List including net weight and gross weight, number of boxes, Marks and Numbers • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy • Fumigation Certificates • Raw Material Test Reports • Material Traceability Records • Quality Assurance Plan (QAP) • Heat Treatment Charts • Test Certificates certifying NACE MR0103, NACE MR0175 • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 • Guarantee Letter • NABL approved Laboratory Test Reports • Forging Procedure Specification/Procedure Qualification Record, WPS/PQR • Form A for the purposes of the Generalized System of Preferences (GSP)
Sachiya Steel International is one of the leading Manufacturer And Exporter of Alloy Steel F91 Threaded Forged Fittings, which is not recommended for use in temperatures above the relevant tempering temperature, because of reduction in mechanical properties. Our Alloy Steel F91 Forged Threaded Elbow Fittings has highly resistant to stress corrosion cracking if aged at 550 Degree C or higher, where higher aging temperatures give better SCC resistance. Heat this Alloy Steel F91 Forged Threaded Tee Fittings uniformly up to 1200 Degree F / 1400 Degree F (650 Degree C / 760 Degree C) along with air cool.
For maximum softness, heat this Alloy Steel F91 Forged Threaded Cross Fittings up to 1500 Degree F / 1650 Degree F (815 Degree C / 900 Degree C) along with slow furnace cool. Temper this Alloy Steel F91 Forged Threaded Cap Fittings at temperatures appropriate to produce desired mechanical properties. If this Alloy Steel F91 Forged Threaded Coupling Fittings is tempered in the range 750 Degree F / 1050 Degree F (400 Degree C / 565 Degree C), there will be a decrease in impact strength and in corrosion resistance – depending upon the media.
The tempering range 425 Degree C – 600 Degree C in this Alloy Steel F91 Forged Threaded Bend Fittings should be avoided. Meanwhile, the scaling temperature of our Alloy Steel F91 Forged Threaded Bushing Fittings should be approximately temperature of 650 Degree C.
Alloy Steel F91 Threaded Forged Fittings Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B, • Raw Materials Certificate • 100% Radiography Test Report • Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area • Hardness Test • Chemical Analysis – Spectro Analysis • Positive Material Identification – PMI Testing • Flattening Test • Micro and Macro Test • Pitting Resistance Test • Flaring Test • Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code • Packing List including net weight and gross weight, number of boxes, Marks and Numbers • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy • Fumigation Certificates • Raw Material Test Reports • Material Traceability Records • Quality Assurance Plan (QAP) • Heat Treatment Charts • Test Certificates certifying NACE MR0103, NACE MR0175 • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 • Guarantee Letter • NABL approved Laboratory Test Reports • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR • Form A for the purposes of the Generalized System of Preferences (GSP)
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Hastelloy C22 Threaded Forged Fittings to the esteemed clients, which are designed and engineered utilizing advanced technology and high quality metals. Hastelloy C22 Forged Threaded Elbow Fittings (UNS N06022) has shown an outstanding resistance to a wide range of chemicals, including chlorides, organic and inorganic solutions. Hastelloy C22 Forged Threaded Tee Fittings also has excellent resistance to oxidizing aqueous media including wet chlorine and mixtures containing nitric acid or oxidizing acids with chlorine ions.
Hastelloy C22 Forged Threaded Cross Fittings has better overall corrosion resistance than Hastelloy C-4 & C-276 and Inconel 625. Meanwhile, these Hastelloy C22 Forged Threaded Cap Fittings are as well being offered in customized sizes and shapes to our customers. We also offer Hastelloy C22 Forged Threaded Bend Fittings at market leading rates. Annealing of Hastelloy C22 Forged Threaded Coupling Fittings can be performed at a temperature range between the ranges of 2020 Degree F – 2150 Degree F followed by a rapid quench.
Cooling of Hastelloy C22 Forged Threaded Union Fittings at an accelerated rate avoids the formation of detrimental phases which form between the ranges of 1400 Degree F – 1800 Degree F. Hastelloy C22 Forged Threaded Bushing Fittings also offers optimum resistance to environments where reducing and oxidizing conditions are encountered in process streams. Hastelloy C22 Forged Threaded Plug Fittings is beneficial in multi – purpose plants where such “upset” conditions occur frequently.
Hastelloy C22 Threaded Fittings Specifications
Specifications
:
ASTM B564 & ASME B564
Size
:
1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
:
ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class
:
2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type
:
Threaded Fittings
Hastelloy C22 Forged Threaded Fittings Chemical Composition
Hastelloy C22 Forged Threaded Fittings Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B, • Raw Materials Certificate • 100% Radiography Test Report • Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area • Hardness Test • Chemical Analysis – Spectro Analysis • Positive Material Identification – PMI Testing • Flattening Test • Micro and Macro Test • Pitting Resistance Test • Flaring Test • Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code • Packing List including net weight and gross weight, number of boxes, Marks and Numbers • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy • Fumigation Certificates • Raw Material Test Reports • Material Traceability Records • Quality Assurance Plan (QAP) • Heat Treatment Charts • Test Certificates certifying NACE MR0103, NACE MR0175 • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 • Guarantee Letter • NABL approved Laboratory Test Reports • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR • Form A for the purposes of the Generalized System of Preferences (GSP)
Sachiya Steel International is a Leading Manufacturer And Exporter of Copper Buttweld Fittings, which is available in different sizes and shapes for our esteemed clients. Our organization is highly known among the customers for manufacturing, supplying and exporting a qualitative array of these Copper Elbow Butt Weld Pipe Fittings, which is being offered at market leading prices to our customers. Air Conditioner Compressor, Brazed Plate Heat Exchanger and many more used by Copper Tee Butt Weld Pipe Fittings are available at most competitive prices. We are a Leading Supplier of these Copper Cross Butt Weld Pipe Fittings, which it is mainly used in ventilation and air conditioning systems.
Copper Reducer Butt Weld Pipe Fittings are mainly used for Copper Fittings or Dairy equipment, Medical Gas Distribution system Lines, refrigeration & air conditioning, Electronics & Telecommunication, Machine Building & Ship Building. The use of these Copper Bend Pipe Fittings in air – conditioning and refrigeration systems has grown steadily in recent years. We are one of the most trusted business organizations engaged in importing and supplying a wide range of Copper Stub End Butt Weld Pipe Fittings, where we have gained a noteworthy position in the industry.
Owing to the presence of our expert team members we are able to offer our clients a wide array of these Copper End Cap Butt Weld Pipe Fittings, which are highly demanded in the market for their accurate dimensions and durability.
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B, • Raw Materials Certificate • 100% Radiography Test Report • Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area • Hardness Test • Chemical Analysis – Spectro Analysis • Positive Material Identification – PMI Testing • Flattening Test • Micro and Macro Test • Pitting Resistance Test • Flaring Test • Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code • Packing List including net weight and gross weight, number of boxes, Marks and Numbers • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy • Fumigation Certificates • Raw Material Test Reports • Material Traceability Records • Quality Assurance Plan (QAP) • Heat Treatment Charts • Test Certificates certifying NACE MR0103, NACE MR0175 • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 • Guarantee Letter • NABL approved Laboratory Test Reports • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR • Form A for the purposes of the Generalized System of Preferences (GSP)
