Sachiya Steel International

ss pipe

Stainless Steel Pipe Manufacturers In India | SS Pipes Suppliers, Dealers, Wholesalers in India

Stainless Steel Pipe Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality stainless steel pipe, stainless steel pipe manufacturers in India, we stock over 600 tons in ss seamless and welded pipes. Sachiya Steel International is one of the largest stainless steel pipe supplier in India. Our stainless steel products include stainless steel seamless tube, stainless steel welded tube, ss seamless pipe and ss welded pipe. We supply a large variety of grades in size range of 6mm OD to 610mm OD, with thickness upto 30mm. We manufacture large diameter fabricated stainless steel pipes, high wall thick stainless steel pipes and thin walled stainless steel tubings.

stainless steel pipe

The elements used in the manufacture of any grade Stainless Steel Pipes improves its longevity along with enhancing several of its properties such as corrosion resistance, increased tensile strength & durability. Therefore various grade Stainless Steel Welded Pipes such as alloys 304, 316, 310 etc are used in highly demanding applications involving industries like water, marine, pulp and paper industry, chemical processing, oil and gas, petrochemicals etc.

When alloy grade 316 is used in the manufacture of ASTM A312 Stainless Steel boiler pipes, the resultant pipe can be used in not only high temperature applications, but also general corrosive service. This is because grade 316 electropolished stainless steel pipes has improved resistance to corrosion and is often referred to as a marine grade stainless steel alloy. stainless steel pipe manufacturers in India ,On the other hand, those applications which are less demanding can use alloy grade 304, which although is known to have advantageous properties, is not as good at resisting corrosion in comparison to its austenitic counterpart grade 316 Stainless Steel Pipe.

Stainless Steel Pipe Specifications

Product Stainless Steel Pipes
Type Seamless, Welded, ERW, 100% X Ray Welded
Size OD (mm) 6.00 to 610.00
Thickness (mm) 0.5mm to 30mm
Length (mm) 6000, 3000, 2000, 12000, Custom Length
Finish Annealed & Pickled, 2B, No.4, Mirror, Polish
Packing Bundled Packing
Services Cutting, Beveling, Threading, Polishing

Sachiya Steel International provides ex-stock supply of stainless steel seamless pipes per ASTM A312 in 304/304L, 316/316L/316Ti, 3

21H, SS347H, 317L, 904L and SS446 among other special grades. 304/304L stainless steel pipes/tubes and 316/316L stainless steel pipes/tubes are readily available in all standard pipe sizes and schedules including Sch 5, Sch 10, Sch 40s and Sch 80s. Stainless steel seamless tubes are available in compliance with ASTM A213 and ASTM A269 in common grades of such as 304/304L and 316/316L in standard tube sizes and wall thicknesses. We stainless steel pipe manufacturers in India ,We can offer custom size cold drawn stainless steel pipes and stainless steel tubes to our customers. Generally stainless steel pipes and stainless steel tubes are available in standard OD or NB sizes. However, with our tube processing capabilities we can offer any custom size outside diameter and thickness to our customers.

Stainless Steel Welded Pipes & Tubes

Sachiya Steel International provides ex-stock supply of stainless steel welded pipes in accordance with ASTM A312 in common grades such as 304/304L and 316/316L in standard pipe sizes and schedules including Sch 5, Sch 10, Sch 40s and Sch 80s. We stainless steel pipe manufacturers in India , Sachiya Steel International in the supply of 100% X-Ray Welded custom sizes large diameter fabricated stainless steel pipes. All custom fabricated stainless steel pipe products are accompanied with X-Ray reports and chemical and physical properties certification from NABL approved labs. Specialty testing, including Hydro Testing, Destructive Test, and Non Destructive Test reports can be supplied upon customer request.

Stainless Steel Pipes, Stainless Steel Tubes Testing & Value Added Processing Services from Sachiya Steel International

  1. Stainless Steel Pipe Polishing
  2. Stainless Steel Pipe Beveling
  3. Heat Treatment, Annealing, Pickling
  4. Ultrasonic Testing
  5. 100% X-Ray Welding for Large Diameter Custom Size Stainless Steel Pipes
  6. Tube Processing
  7. Special Testing Requirements – Destructive Testing, Non Destructive Testing etc.
Type Description USA FOB Price Malaysia FOB Price Europe FOB Price Singapore FOB Price Saudi Arabia (KSA) FOB Price
Unit Per mtr Unit Per mtr Unit Per mtr Unit Per mtr Unit Per mtr
SS 304 Seamless Pipe Size : 6″NB x SCH.80S US $ 105.85 Malaysia Ringgit 430.81 Euro 88.91 Singapore Dollar 141.84 Saudi Riyal 396.94
SS 304 Welded Pipe Size : 10″NB x SCH.10S US $ 66.7 Malaysia Ringgit 271.47 Euro 56.03 Singapore Dollar 89.38 Saudi Riyal 250.13
310S Stainless Steel Pipe / tube Size : 2″ OD x 2.11mm Thk US $ 14.04 Malaysia Ringgit 57.14 Euro 11.79 Singapore Dollar 18.81 Saudi Riyal 52.65
310 Stainless Steel Pipe/ Tubing Size : 2.1/2″ OD x 2.5mm Thk US $ 20.62 Malaysia Ringgit 83.92 Euro 17.32 Singapore Dollar 27.63 Saudi Riyal 77.33
317L Stainless Steel Pipe Size : 3″NB x SCH.40S US $ 85.15 Malaysia Ringgit 346.56 Euro 71.53 Singapore Dollar 114.10 Saudi Riyal 319.31
321 Stainless Steel Pipe Size : 8″NB x SCH.80S US $ 203.91 Malaysia Ringgit 829.91 Euro 171.28 Singapore Dollar 273.24 Saudi Riyal 764.66
347H Stainless Steel Pipe Size : 3″NB x SCH.XXS US $ 151.85 Malaysia Ringgit 618.03 Euro 127.55 Singapore Dollar 203.48 Saudi Riyal 569.44
410 Stainless Steel Pipe Size : 8″NB x SCH.10S US $ 32.91 Malaysia Ringgit 133.94 Euro 27.64 Singapore Dollar 44.10 Saudi Riyal 123.41
446 Stainless Steel Pipe Size : 12″NB x SCH.10S US $ 66.65 Malaysia Ringgit 271.27 Euro 55.99 Singapore Dollar 89.31 Saudi Riyal 249.94

We stainless steel pipe manufacturers in India ,The elements used in the manufacture of any grade Stainless Steel Pipes improves its longevity along with enhancing several of its properties such as corrosion resistance, increased tensile strength & durability. Therefore various grade Stainless Steel Welded Pipes such as alloys 304, 316, 310 etc are used in highly demanding applications involving industries like water, marine, pulp and paper industry, chemical processing, oil and gas, petrochemicals etc.

When alloy grade 316 is used in the manufacture of ASTM A312 Stainless Steel boiler pipes, the resultant pipe can be used in not only high temperature applications, but also general corrosive service. This is because grade 316 electropolished stainless steel pipes has improved resistance to corrosion and is often referred to as a marine grade stainless steel alloy. On the other hand, those applications which are less demanding can use alloy grade 304, which although is known to have advantageous properties, is not as good at resisting corrosion in comparison to its austenitic counterpart grade 316 Stainless Steel Pipe.

stainless steel pipe

stainless steel pipe manufacturers                           in India

However, it is important to note that due to its affordability as well as enhanced properties, the specified grade 304 ASME B36.19 stainless steel pipes are quite versatile and is considered to be very popular choice of metal in many applications. For instance, in the food industry, particularly the dairy industry uses stainless steel dairy pipes in the processing of acid containing items such as milk. Additionally, the factory uses high temperatures to treat these food groups followed by rapid cooling. Hence this alloy grade 304 or grade 316 ASTM A312 specified high temperature stainless steel seamless pipes needs to be able to withstand both high as well as low temperature settings. To learn more about the price of ASTM A731 Stainless Steel elliptical pipes, you can click the link given here.

Sachiya Steel International is one of the premier quality stainless steel pipe manufacturer in India. We strive to provide customer satisfaction by implementing Quality Management System and continual improvements in products, processes and systems.

Stainless Steel Welded Pipe Manufacturer In India 

We stainless steel pipe manufacturers in India, Stainless Steel welded pipe is a long coiled ribbon of steel called skelp. The skelp is cut to the desired length, resulting in a flat rectangular sheet. The shorter ends of sheet’s width become the pipes outside circumference and to calculate it’s eventual outside diameter that value can be used And for forming a cylinder rectangular sheets are fed through a rolling machine that curls the longer sides up toward one another. Stainless Steel erw pipes are manufactured by high-frequency or low-frequency resistance. With longitudinal welds the round pipes are welded from steel plates. It plays an important position in the field of transportation pipes in the world. ERW steel pipes are used to transport natural gas, oil, and other vapour-liquid objects, and also it can meet various requirements of high and low pressure. astm a312 welded pipe contains chromium which gives corrosion resistance properties at high temperature.

stainless steel pipe manufacturers in india

stainless steel pipe manufacturers                           in India

It can with stand corrosive or chemical environments. It has excellent forming, toughness and welding characteristic. ASTM A312 pipes are commonly used in demanding equipment like food processing, automobiles, oil and gas processing, water treatment facilities, refinery and petrochemicals, breweries and energy industries. You can buy Large diameter stainless steel welded pipe in above 457 mm and 508 mm from any supplier in India. The diameter of pipe which is larger than its OD is known as large diameter pipe. It plays an important role in oil and gas transmissions. It is used a lot for long distances pipeline projects, since it could carry more liquid and with big flow rate. View SCH 40 Pipe Dimensions in mm.

Other relevant products of Stainless Steel Pipe

stainless steel pipe manufacturers in India, ASTM A790 Stainless Steel high pressure pipe traders, Martensitic Stainless Steel large diameter pipe exporter in Mumbai. Super Ferritic Stainless Steel oval pipe, ANSI B36.19 Stainless Steel pipe manufacturers in India, compare our price with Jindal Stainless Steel pipe price list.
Stainless Steel Seamless Pipes Schedule 10 Stainless Steel Pipes
Stainless Steel Welded Pipes 3 Inch Stainless Steel Pipes
Stainless Steel Erw Pipes 4 Inch Stainless Steel Pipes
Mirror Finish Stainless Steel Pipes Large Diameter Stainless Steel Pipes
Mirror Polished Stainless Steel Pipes Large Diameter Seamless Stainless Steel Pipes
Brushed Stainless Steel Pipes Nsf 61 Certified Stainless Steel Pipes
Corrugated Stainless Steel Pipes Nfpa 13 Stainless Steel Pipes
Double Wall Stainless Steel Pipes Oval Shaped Stainless Steel Pipes
Dn100 Stainless Steel Pipes Polished Stainless Steel Pipes
Efw Stainless Steel Pipes Thin Wall Stainless Steel Pipes
Electropolished Stainless Steel Pipes Stainless Steel Hollow Pipes
Stainless Steel Elliptical Pipes Stainless Steel Round Pipes
Schedule 40 Stainless Steel Pipes Seamless SS Transmission Pipes
SS Seamless Oil and gas Pipes Stainless Steel precision Pipes

ASME B36.19 Stainless Steel Pipe Size Chart

Manufacturer of EN 10217-7 Stainless Steel round pipe, Best quality Stainless Steel pipe and Chromium Nickel Stainless Steel ornamental pipe, Check Martensitic Stainless Steel rectangular pipe & Schedule 40 Stainless Steel electropolished Pipe sizes.
Dia NPS OUTSIDE
DIAMETER(Milimeter)		 SCH-5S
WALL THICKNESS(Milimeter)		 SCH-10S
WALL THICKNESS(Milimeter)		 SSCH-40S
WALL THICKNESS(Milimeter)
3/8 17.15 1.65 2.31
5 141.30 2.77 3.40 6.55
3/4 26.67 1.65 2.11 2.87
1 33.40 1.65 2.77 3.38
1 1/4 42.16 1.65 2.77 3.56
1 1/2 48.26 1.65 2.77 3.68
4 114.30 2.11 3.05 6.02
2 60.33 1.65 2.77 3.91
2 1/2 73.03 2.11 3.05 5.16
1/2 21.34 1.65 2.11 2.77
3 88.90 2.11 3.05 5.49
3 1/2 101.60 2.11 3.05 5.74
1/4 13.72 1.65 2.24
6 168.28 2.77 3.40 7.11
8 219.08 2.77 3.76 8.18
10 273.05 3.40 4.19 9.27
12 323.85 3.96 4.57 9.53
14 355.60 3.96 4.78 9.53
24 609.60 5.54 6.35 9.53
16 406.40 4.19 4.78 9.53
18 457.20 4.19 4.78 9.53
20 508.00 4.78 5.54 9.53
22 558.80 4.78 5.54
30 762.00 6.35 7.92
32|

80

 812.8|

2032.0
(Thickness)：6.35~30mm

Nominal diameter and wall thickness subject to the approval of vendor and purchaser

Production, Supply, Stock Range of Stainless Steel Pipes and Stainless Steel Tubes

Stainless Steel Pipe Manufacturing Grades
Austenite Stainless Steel Pipe Grades 304/304L, 316/316L, 304H, 304LN, 316Ti, 310S, 904L, 317L, 321/321H, 347/347H
Martensite Stainless Steel Pipes Grades 446, 410S
Duplex Stainless Steel Pipes Grades S31803, S32205, S32750, Duplex 2205, Super Duplex 2507

 

Outside Diameter 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock
Thickness Range 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Type Seamless / ERW / Welded / Fabricated / CDW
Form Round Pipes/Tubes, Square Pipes/Tubes, Rectangular Pipe/Tubes, Coiled Tubes, “U” Shape, Pan Cake Coils, Hydraulic Tubes
Length Single Random, Double Random & Required Length End: Plain End, Beveled End, Treaded
End Protection Plastic Caps
Surface Finish: 2B, No.4, No.1, No.8 Mirror Finish for Stainless Steel Pipes, Finish as per customer Requirements
Delivery Condition Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Inspection, Test Reports Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports
Packing Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Specials Sizes and Specifications other than above can be manufactured on request

Chemical Composition of Stainless Steel Pipes, as per ASTM A312 Manufacturing Standard

The below table shows the chemical composition of the most used A312 Stainless Steel Pipes:

A312 GRADES UNS C Mn P S Si Cr Ni Mo Ti Nb N
TP304 S30400 0.08 2 0.045 0.03 1 18.0-20.0 8.0-11.0
TP304L S30403 0.035 2 0.045 0.03 1 18.0-20.0 8.0-13.0
TP304H S30409 0.04-0.10 2 0.045 0.03 1 18.0-20.0 8.0-11.0
TP304N S30451 0.08 2 0.045 0.03 1 18.0-20.0 8.0-18.0 0.10-0.16
TP304LN S30453 0.035 2 0.045 0.03 1 18.0-20.0 8.0-12.0 0.10-0.16
TP309S S30908 0.08 2 0.045 0.03 1 22.0-24.0 12.0-15.0 0.75
TP309H S30909 0.04-0.10 2 0.045 0.03 1 22.0-24.0 12.0-15.0
TP309Cb S30940 0.08 2 0.045 0.03 1 22.0-24.0 12.0-16.0 0.75 10xC min
1.10 max
TP309HCb S30941 0.04-0.10 2 0.045 0.03 1 22.0-24.0 12.0-16.0 0.75 10xC min
1.10 max
TP310S S3108 0.08 2 0.045 0.03 1 24.0-26.0 19.0-22.0 0.75
TP310H S3109 0.04-0.10 2 0.045 0.03 1 24.0-26.0 19.0-22.0
TP310Cb S31040 0.08 2 0.045 0.03 1 24.0-26.0 19.0-22.0 0.75 10xC min
1.10 max
TP310HCb S31041 0.04-0.10 2 0.045 0.03 1 24.0-26.0 19.0-22.0 0.75 10xC min
1.10 max
TP316 S3160 0.08 2 0.045 0.03 1 16.0-18.0 11.0-14.0 2.0-3.0
TP316L S31603 0.035 2 0.045 0.03 1 16.0-18.0 10.0-14.0 2.0-3.0
TP316H S31609 0.04-0.10 2 0.045 0.03 1 16.0-18.0 11.0-14.0 2.0-3.0
TP316Ti S31635 0.08 2 0.045 0.03 0.75 16.0-18.0 10.0-14.0 2.0-3.0 5x 0.1
(C-N)
-0.7
TP316N S31651 0.08 2 0.045 0.03 1 16.0-18.0 10.0-14.0 2.0-3.0 0.10-0.16
TP316LN S31653 0.035 2 0.045 0.03 1 16.0-18.0 11.0-14.0 2.0-3.0 0.10-0.16
TP317 S3170 0.08 2 0.045 0.03 1 18.0-20.0 10.0-14.0 3.0-4.0
TP317L S31703 0.035 2 0.045 0.03 1 18.0-20.0 11.0-15.0 3.0-4.0
TP321 S3210 0.08 2 0.045 0.03 1 17.0-19.0 9.0-12.0 0.1
TP321H S32109 0.04-0.10 2 0.045 0.03 1 17.0-19.0 9.0-12.0 0.1
TP347 S3470 0.08 2 0.045 0.03 1 17.0-19.0 9.0-13.0
TP347H S34709 0.04-0.10 2 0.045 0.03 1 17.0-19.0 9.0-13.0
TP347LN S34751 0.05-0.02 2 0.045 0.03 1 17.0-19.0 9.0-13.0 0.20- 0.06-0.10
50
TP348 S3480 0.08 2 0.045 0.03 1 17.0-19.0 9.0-13.0
TP348H S34809 0.04-0.10 2 0.045 0.03 1 17.0-19.0 9.0-13.0

Mechanical Properties of Stainless Steel Pipes, as per ASTM A312

ASTM A312 Mechanical Properties
Material Heat Temperature Tensile Strength Yield Strength Elongation %, Min
Treatment Min. Ksi (MPa), Min. Ksi (MPa), Min.
º F(º C)
TP304 Solution 1900 (1040) 75(515) 30(205) 35
TP304L Solution 1900 (1040) 70(485) 25(170) 35
TP304H Solution 1900 (1040) 75(515) 30(205) 35
TP310S Solution 1900 (1040) 75(515) 30(205) 35
TP316 Solution 1900(1040) 75(515) 30(205) 35
TP316L Solution 1900(1040) 70(485) 25(170) 35
TP316H Solution 1900(1040) 75(515) 30(205) 35
TP316Ti Solution 1900(1040) 75(515) 30(205) 35
TP321 Solution 1900(1040) 75(515) 30(205) 35
TP321H Solution Cold: 2000(1100) 75(515) 30(205) 35
Hot: 1925(1050)
TP347 Solution 1900(1040) 75(515) 30(205) 35
TP347H Solution Cold: 2000(1100) 75(515) 30(205)
Hot: 1925(1050)

Dimensions of Welded and Seamless Stainless Steel Pipe

NPS Outside Diameter Nominal Wall Thickness
Designator in. mm Schedule 5S Schedule 10S Schedule 40S Schedule 80S
in. mm in. mm in. mm in. mm
1/8 0.41 10.29 … … 0.049 1.24 0.068 1.73 0.095 2.41
1/4 0.54 13.72 … … 0.065 1.65 0.088 2.24 0.119 3.02
3/8 0.68 17.15 … … 0.065 1.65 0.091 2.31 0.126 3.2
1/2 0.84 21.34 0.065 1.65 0.083 2.11 0.109 2.77 0.147 3.73
3/4 4.05 26.67 0.065 1.65 0.083 2.11 0.113 2.87 0.154 3.91
1 1.32 33.4 0.065 1.65 0.109 2.77 0.133 3.38 0.179 4.55
1 1/4 1.66 42.16 0.065 1.65 0.109 2.77 0.14 3.56 0.191 4.85
1 1/2 1.90 48.26 0.065 1.65 0.109 2.77 0.145 3.68 0.2 5.08
2 2.38 60.33 0.065 1.65 0.109 2.77 0.154 3.91 0.218 5.54
2 1/2 2.88 73.03 0.083 2.11 0.12 3.05 0.203 5.16 0.276 7.01
3 3.50 88.9 0.083 2.11 0.12 3.05 0.1216 5.49 0.3 7.62
3 1/2 4.00 101.6 0.083 2.11 0.12 3.05 0.226 5.74 0.318 8.08
4 4.50 114.3 0.083 2.11 0.12 3.05 0.237 6.02 0.337 8.56
5 5.56 141.3 0.10*9 2.77 0.134 3.4 0.258 6.55 0.375 9.52
6 6.63 168.28 0.10*9 2.77 0.134 3.4 0.28 7.11 0.432 10.97
8 8.63 219.08 0.109 2.77 0.148 3.76 0.322 8.18 0.5 12.7
10 10.75 273.05 0.134 3.4 0.165 4.19 0.365 9.27 0.5 12.7
12 12.75 323.85 0.156 3.96 0.18 4.57 0.375 9.52 0.5 12.7
14 14.00 355.6 0.156 3.96 0.188 4.78 … … … …
16 16.00 406.4 0.165 4.19 0.188 4.78 … … … …
18 18.00 457.2 0.165 4.19 0.188 4.78 … … … …
20 20.00 508 0.188 4.78 0.188 4.78 … … … …
22 22.00 558.8 0.188 4.78 0.218 5.54 … … … …
24 24.00 609.6 0.218 5.54 0.25 6.35 … … … …
30 30.00 762 0.25 6.35 0.312 7.92 … … … …

Outside Diameter Tolerance of Stainless Steel Pipes

NPS ASTM A312 OD Tolerance
+ –
inch mm inch mm
1/8~1 1 /2 1/64(0.015) 0.4 1/32(0.031) 0.8
> 1 1 /2~4 1/32(0.031) 0.8 1/32(0.031) 0.8
> 4~8 1/16(0.062) 1.6 1/32(0.031) 0.8
> 8~18 3/32(0.093) 2.4 1/32(0.031) 0.8
> 18~26 1/8(0.125) 3.2 1/32(0.031) 0.8
> 26~34 5/32(0.156) 4 1/32(0.031) 0.8
> 34~48 3/16(0.187) 4.8 1/32(0.031) 0.8

Wall Thickness Tolerance of Stainless Steel Pipes

NPS ASTM A312 WT Tolerance, %
+ –
1/8-2 1 /2 20 12.5
3~18, t/D≤ 5% 22.5 12.5
3~18, t/D> 5% 15 12.5
≥ 20, welded 17.5 12.5
≥ 20, seamless, t/D≤ 5% 22.5 12.5
≥ 20, seamless, t/D> 5% 15 12.5

Premier Stainless Steel Tube Manufacturers in India -Sachiya Steel International

Improve your projects with the superior quality of Sachiya Steel International, a trailblazing name among stainless steel tube manufacturers in India. Our commitment to outstanding quality and cutting-edge solutions is unrivalled, and we have a solid reputation as a premier SS tube manufacturer in India. With modern production facilities that pioneer the industry in producing a wide range of stainless steel tubes, Sachiya Steel International takes fulfilment in providing them.

Sachiya Steel International, a reputable ss tube manufacturer in India goes above and beyond expectations. Our extensive selection of precisely made ss tubes is known for its remarkable toughness, corrosion resistance, and dimensional perfection. We serve a variety of industries as one of the top producers of stainless steel tubes in India, providing solutions compliant with high international standards. To give our clients a competitive edge for their projects, in addition to receiving stainless steel tubes, we consistently push the boundaries of innovation.

Rely on Sachiya Steel International’s reputation for dependability. Renowned as a top-tier SS tube manufacturers in India, our wide selection of stainless steel tubes reflects our commitment to superior quality. In addition to providing stainless steel tubes, we also create enduring relationships. Beyond being a mere supplier of stainless steel tubes, we forge lasting partnerships. We contribute to the nation’s industrial growth story while keeping an eye on the world markets and a heart firmly planted in India. Choose Sachiya Steel International for stainless steel tubes that are the epitome of perfection because of their precision, honesty, and superiority.

Stainless Steel Pipes Manufacturing Specifications

ASTM A312: Seamless and straight-seam welded austenitic pipe intended for high temperature and general corrosive service. Filler metal not permitted during welding.

ASTM A358: Electric fusion welded austenitic pipe for corrosive and/or high temperature service. Typically only pipe up to 8 inch is produced to this specification. Addition of filler metal is permitted during welding.

ASTM A790: Seamless and straight-seam welded ferritic/austenitic (duplex) pipe intended for general corrosive service, with a particular emphasis on resistance to stress corrosion cracking.

ASTM A409: Straight-seam or spiral-seam electric fusion welded large diameter austenitic light-wall pipe in sizes 14” to 30” with walls Sch5S and Sch 10S for corrosive and/or high

ASTM A376: Seamless austenitic pipe for high temperature applications.

ASTM A813: Single-seam, single- or double- welded austenitic pipe for high temperature and general corrosive applications.

ASTM A814: Cold-worked welded austenitic pipe for high temperature and general corrosive service.

Sr. No. Description Sizes Thickness Price/Kg in Rs. Price in US$/kg
Stainless Steel Seamless Pipes Domestic Sales to India Export Price
1 ASTM A312 TP 304 Seamless Pipes 11/2″ to 4″ SCH 10 & SCH 40 270 3.5
2 ASTM A312 TP 304 Seamless Pipes 1″ SCH 10 & SCH 40 295 3.40
3 ASTM A312 TP 304 Seamless Pipes 6″ SCH 10 & SCH 40 310 4.30
4 ASTM A312 TP 316L Seamless Pipes 11/2″ to 4″ SCH 10 & SCH 40 360 4.95
5 ASTM A312 TP 316L Seamless Pipes 1″ SCH 10 & SCH 40 390 5.40
Stainless Steel Welded/ERW Pipes
1 ASTM A312 TP 304 ERW Pipes 1″ to 4″ SCH 10 & SCH 40 195 2.90
2 ASTM A312 TP 304 ERW Pipes 6″ SCH 10 & SCH 40 220 3.20
3 ASTM A312 TP 316L ERW Pipes 1″ to 4″ SCH 10 & SCH 40 290 4.20
4 ASTM A312 TP 316L ERW Pipes 6″ SCH 10 & SCH 40 320 4.70
Stainless Steel Polished Pipes, 600 Grit
1 ASTM A554 304 Pipes 1″ to 3″ 1.2mm, 1.5mm 200 2.95
2 ASTM A554 201 Pipes 1″ to 3″ 1.2mm, 1.5mm 140 1.85
3 ASTM A554 316 Pipes 1″ to 3″ 1.2mm, 1.5mm 305 4.30

Some of the major locations we have supplied ss seamless and welded pipes

Products We supplied to following Locations
40 mm NB, SS Seamless Pipe, Schedule 40 Indonesia, Dammam -KSA, Philippines, Belgium
Ferritic martensitic steel seamless pipes France, Qatar, Europe, Thailand
50mm ASTM A 312 Stainless Steel Seamless Pipe Germany, Czechia, Thailand, Malaysia
Jindal/ Tata Make Schedule 40 Seamless Pipes USA, Malaysia, Bangladesh, Finland
ASTM A269 Seamless Pipe Saudi Arabia (KSA), South Africa, Kuwait, Brazil
SS ERW and Seamless Pipes South Africa, Singapore, Bahrain
BE 18″ SCH STD, ASME B 36.19M Stainless Steel Seamless Pipe Australia, Philippines, UK, Nigeria
Stainless steel pipe for chilled water, ANSI B36.19 Malaysia, Oman, Hong Kong
8″ NB SCH 5 SS SEAMLESS PIPE Italy, Chile, Iran, Singapore
ASTM 312 Pipe Seamless, DN150, SCH – 10S Turkey, United Arab Emirates (UAE), Norway
Schedule 20 Seamless round pipe Malaysia, Netherlands, Russia
1.5” NPS Austenitic stainless steel seamless pipes Spain, Egypt, Mexico, UK, Singapore
SS ERW Round Pipe Europe, United Kingdom -UK, Malaysia
SS seamless pipe in schedule 60 Canada, Ellington -United States, UK
sch20 Food grade SS Pipes Malaysia, Philippines, Canada, Singapore
Sch 5, annealed, seamless, cold finish pipes Japan, Europe, Romania, Poland
ASME SA213 Stainless pipe annealed pickled expanding Colombia, Sweden, Malaysia, China
Stainless Steel Welded Pipes Taiwan, Philippines, Los Alamos -Mexico
BE SCH 10S SEAMLESS PIPES AS PER ASME B36.19 South Korea, Singapore, NY 12203 (USA)

 

 

Buy from stainless steel welded pipe manufacturer in India to ensure high quality at better price, also you can save the wastage if buy the exact sizes

  • Aerospace
  • Appliance
  • Architectural
  • Automotive
  • Blow Molding
  • Chemical
  • Computer
  • Construction
  • Defense
  • Fasteners
  • Flat Bar
  • Foam Molding
  • Food & Dairy
  • Food Processing
  • Furniture
  • General Industrial
  • Hydraulic tube
  • Injection Molding
  • Machine
  • Marine
  • Medical
  • Motor Sports
  • Oil & Gas
  • Railroad
  • RIM Molding
  • Screw
  • Sheet Metal
  • Storage Tanks
  • Transportation
  • Truck
  • Truck & Trailer
  • Uncategorized
  • Vacuum Molds

 

 

Stainless Steel Pipe Chemical composition

Stainless Steel Pipe Chemical composition

General queries of our customers about Stainless Steel Seamless Pipes

  • What is the minimum diameter and maximum size in seamless pipe?
    Ans: Minimum OD: 16 inch, 406.4 mm
    Maximum OD: 20 inch, 508 mm
  • What is the price difference between Seamless & Welded Pipe in India?
    Ans: Seamless steel pipe cost is almost 40-50% higher compared to the welded pipes due to manufacturing process & raw material, click here to view the updated Stainless Steel Seamless Pipe Price List.
  • What is the maximum pressure of SCH40 Seamless Pipes?
    Ans: Pressure rating depends upon sizes, wall thickness & temperature. For example:
    1″ SCH40 WT 0.133, 100°F = 2205 PSi
    10″ SCH40 WT 0.365, 100°F = 699 Psi
  • Why in high pressure applications SS Seamless Pipe is preferred?
    Ans: Welded pipe can be cracked on high pressure while Seamless Pipes can withstand extremely high pressure without cracking. So seamless pipe can take 20% higher pressure compared to welded.
  • What is the weight difference between Welded and Seamless Pipe?
    Ans: The welded pipe is 30% heavier compared to seamless pipe because of welding of HR coil, don’t forget to check SS Pipe Weight Chart.
By |2024-02-07T11:55:44+05:30October 9th, 2021|Pipes|

Stainless Steel 304 Tube Supplier In Bahrain

Stainless Steel 304 Tube Supplier In Bahrain

We are leading Manufacturers, Supplier, Dealers, and Exporter of Stainless Steel 304 Tube In Bahrain. Our Stainless Steel 304 Tube is available in different sizes, shapes, and grades. We supply Stainless Steel 304 Tube in most of the major Indian cities in more than 20 States. We Sachiya Steel International offer different types of grades like Stainless Steel tubes, Super Duplex Steel Tubes, Duplex Steel Tubes, Carbon Steel tubes, Alloys Steel tubes, Nickel Alloys tubes, Titanium Steel tubes, Inconel Steel tubes, Aluminium tubes, etc.

Stainless Steel 304 Tube

Stainless Steel 304 Tube Specifications:

Specifications : ASTM A/ASME SA213/A249/A269
Dimensions : ASTM, ASME, and API
SS 304 Tubes Size
 : 1/8″NB TO 30″NB IN
Thickness : 0.35mm to 6.35mm OD in thickness ranging from 0.1mm to 1.2mm.
Schedule : SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Type : Seamless / ERW / Welded / Fabricated / LSAW Tubes
Form : Round, Square, Rectangular, Hydraulic Etc
Length : Single Random, Double Random & Cut Length.
End : Plain End, Beveled End, Treaded

Types of Stainless Steel 304 Tubes

Stainless Steel 304 Seamless Tubes Stainless Steel 304 Seamless Tube SS 304 Seamless Tubes
304 SS Seamless Tube
304 Stainless Steel Seamless Tubes
UNS S30400 Seamless Tube
WERKSTOFF NR. 1.4301 Seamless Tubes
ASME SA213TP 304 Stainless Steel Seamless Tube
Stainless Steel 304 Welded Tubes Stainless Steel 304 Welded Tube SS 304 Welded Tubes
304 SS Welded Tube
GOST 08Х18Н10 Welded Tube
304 Stainless Steel Welded Tubes
SS UNS S30400 Welded Tube
SS WERKSTOFF NR. 1.4301 Welded Tubes
ASTM A249 TP 304 Stainless Steel Welded Tubes
 Stainless Steel 304 Round Tubes Stainless Steel 304 Round Tubes SS 304 Round Tube
304 SS Round Tubes
GOST 08Х18Н10 Round Tube
304 Stainless Steel Round Tube
UNS S30400 Round Tubes
SS UNS S30400 Round Tube
ASTM A269 TP 304 Stainless Steel Round Tubes
 Stainless Steel 304 Square Tubes Stainless Steel 304 Square Tube SS 304 Square Tubes
304 SS Square Tube
304 Stainless Steel Square Tubes
UNS S30400 Square Tube
WERKSTOFF NR. 1.4301 Square Tubes
ASME SA213 TP 304 Stainless Steel Square Tube
 Stainless Steel 304 Rectangular Tubes Stainless Steel 304 Rectangular Tubes SS 304 Rectangular Tubes
304 SS Rectangular Tube
304 Stainless Steel Rectangular Tubes
SS UNS S30400 Rectangular Tube
SS WERKSTOFF NR. 1.4301 Rectangular Tubes
ASTM A269 TP 304 Stainless Steel Rectangular Tube
 Stainless Steel 304 Decorative Tubes Stainless Steel 304 Decorative Tube SS 304 Decorative Tube
304 SS Decorative Tubes
GOST 08Х18Н10 Decorative Tubes
304 Stainless Steel Decorative Tube
SS UNS S30400 Decorative Tubes
SS WERKSTOFF NR. 1.4301 Decorative Tube
ASTM A213 TP 304 Stainless Steel Decorative Tubes
 SS 304 Santiary Tube Stainless Steel 304 Sanitary Tube SS 304 Sanitary Tube
304 SS Sanitary Tubes
304 Stainless Steel Sanitary Tube
SS UNS S30400 Sanitary Tubes
SS WERKSTOFF NR. 1.4301 Sanitary Tube
ASTM A249 TP 304 Stainless Steel Sanitary Tubes
 Stainless Steel 304 Polish Tubes Stainless Steel 304 Polish Tube SS 304 Polish Tubes
304 SS Polish Tube
304 Stainless Steel Polish Tubes
SS UNS S30400 Polish Tube
SS WERKSTOFF NR. 1.4301 Polish Tubes
ASTM A213 TP 304 Stainless Steel Polish Tube
 SS 304 Instrumentation Tubes Stainless Steel 304 Instrumentation Tube SS 304 Instrumentation Tube
304 SS Instrumentation Tubes
304 Stainless Steel Instrumentation Tube
SS UNS S30400 Instrumentation Tubes
SS WERKSTOFF NR. 1.4301 Instrumentation Tube
ASTM A213 TP 304 Stainless Steel Instrumentation Tubes
 SS 304 Heat exxchager Tube Stainless Steel 304 Heat exchanger Tube SS 304 Heat exxchager Tubes
304 SS Heat exxchager Tube
304 Stainless Steel Heat exxchager Tubes
SS UNS S30400 Heat exxchager Tube
SS WERKSTOFF NR. 1.4301 Heat exxchager Tubes
ASTM A249 TP 304 Stainless Steel Heat exxchager Tubes
 SS 304 Bright Annealing Tubes Stainless Steel 304 Bright Annealing Tube SS 304 Bright Annealing Tubes
304 SS Bright Annealing Tube
GOST 08Х18Н10 SS Annealing Tubes
304 Stainless Steel Bright Annealing Tubes
SS UNS S30400 Bright Annealing Tube
SS WERKSTOFF NR. 1.4301 Bright Annealing Tube
ASTM A213 TP 304 Stainless Steel Bright Annealing Tube

304 Stainless Steel Tubes Available Sizes

NB Sizes Sch 5 Sch 10 Sch 40 Sch 80 Sch 160
1/8″ check check check check
1/4″ check check check check
3/8″ check check check check
1/2″ check check check check check
3/4″ check check check check check
1″ check check check check check
1 1/4″ check check check check check
1 1/2″ check check check check check
2″ check check check check check
2 1/2″ check check check check check
3″ check check check check check
4″ check check check check check
5″ check check check check
6″ check check check check

304 Stainless Steel Tube Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
304 min. – – – – – 18.0 – 8.0 –
max. 0.08 2.0 0.75 0.045 0.030 20.0 10.5 0.10

Stainless Steel 304 Tubes Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304 515 205 40 92 201

Stainless Steel 304 Tube Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
304 8000 193 17.2 17.8 18.4 16.2 21.5 500 720

Equivalent Grades for 304 Stainless Steel Tubes

Grade UNS No Old British Euronorm Swedish SS Japanese JIS GOST
BS En No Name
304 S30400 304S31 58E 1.4301 X5CrNi18-10 2332 SUS 304 08Х18Н10

Stainless Steel 304 Tube Packaging

Stainless Steel 304 Tube Pipe may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of Stainless Steel 304 Tube may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.

Stainless Steel 304 Tube Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 304 Tube Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance with EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRITE CONTENT as per norms if requested by clients.

  • EN 10204/3.1B
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third-Party Inspection Report, etc

Stainless Steel 304 Tube Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flattening Test
  • Micro and Macro Test
  • Pitting Resistance Test
  • Flaring Test
  • Intergranular Corrosion (IGC) Test

Stainless Steel 304 Tube Documentation

  • Commercial Invoice which includes HS Code
  • Packing List including net weight and gross weight, number of boxes, Marks and Numbers
  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Fumigation Certificates
  • Raw Material Test Reports
  • Material Traceability Records
  • Quality Assurance Plan (QAP)
  • Heat Treatment Charts
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Guarantee Letter
  • NABL approved Laboratory Test Reports
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • Form A for the purposes of the Generalized System of Preferences (GSP)

Country’s We Export

Venezuela, Iraq, United Kingdom, Russia, United Arab Emirates, Croatia, Indonesia, Oman, Kazakhstan, Israel, Kenya, Iran, Bahrain, Bhutan, Colombia, Serbia, Pakistan, Czech Republic, Turkey, Ukraine, Poland, Bulgaria, France, Chile, Slovakia, Belgium, Iran, Ireland, Qatar, Sri Lanka, Sweden, Brazil, Bolivia, Taiwan, Jordan, South Africa, Switzerland, Tibet, Norway, India, Ghana, Costa Rica, Hungary, New Zealand, Vietnam, Ecuador, Afghanistan, Algeria, Peru, Netherlands, Argentina, Austria, Malaysia, Thailand, Portugal, Zimbabwe, Mongolia, Lebanon, Trinidad & Tobago, Tunisia, Mexico, Greece, Angola, Hong Kong, Denmark, Nepal, Finland, Chile, Poland, Yemen, Nigeria, Italy, Bangladesh, Australia, Macau, Azerbaijan, Saudi Arabia, Japan, Gabon, Philippines, Singapore, United States, Namibia, Romania, South Korea, Germany, Puerto Rico, Estonia, Morocco, Belarus, Nigeria, Mexico, Spain, China, Canada, Libya, Lithuania, Kuwait, Gambia, Egypt.

By |2024-04-06T18:55:28+05:30January 25th, 2020|

stainless steel pipe manufacturers

stainless steel pipe manufacturers

[lwptoc numeration=”decimal” colorScheme=”white” borderColor=”#268cf2″]

We are leading Manufacturers, Supplier, Dealers, and Exporter of Stainless Steel Pipes in India. stainless steel pipe manufacturers. Our Stainless Steel Pipes are available in different sizes, shapes, and grades. We supply these Pipes in most of the major Indian cities in more than 20 States. We Sachiya Steel International offer different types of grades like Stainless Steel Pipes, Super Duplex Pipes, Duplex  Pipes, Carbon Steel Pipes, Alloys Steel Pipes, Nickel Alloys Pipes, Titanium, Aluminium Pipes, etc.

stainless steel pipe manufacturers

stainless steel pipe manufacturers

Steel pipes are long, hollow Pipes that are used for a variety of purposes. Stainless Steel Pipes and Tubes have excellent corrosion resistance and smooth finishing characteristics. stainless steel pipe manufacturers. The corrosion resistance of the welded steel pipe is the same as the base metal and the strength higher than the base metal. For these reasons, they are used in demanding industries.

Applications of Steel Pipes

  • Textile Machinery
  • Chemicals
  • Fertilizers
  • Dairy and Food Processing
  • Power Plants
  • Pesticides
  • Construction
  • Modern Architecture
  • Pharmaceuticals
  • Sugar
Steel Pipes Specifications
Schedule SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120,SCH140, SCH160, XXS
Standard ASME/ANSI B16.11, MSS-SP-97, MSS-SP-79, JIS B2316, BS 3799
Pipes Size 1/8″NB to 24″NB & 1/4″OD TO 24″OD AND 6.35mm to 254mm OD Thickness: 0.6mm to 20mm
Type Seamless/ erw/ welded/semi welded in round, square, rectangular, coil form, u shape and hydraulic. Pipes
Grades
Stainless Steel ASTM / ASME 201, 202, 301, 304, 304L, 310, 310S, 316L, 316TI, 317, 317L, 321, 347, 409, 409M, 409L, 410, 410S, 420, 430, 431, 441, 444, 446, 17.4PH, 904L
Super Duplex Steel S32750
Duplex Steel ASTM / ASME SA 790 UNS NO S 31803 , S 32205 , S 32550 , S 32750 , S 32760.
Carbon Steel ASTM / ASME A 335 GRP 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91
Alloys Steel ASTM / ASME A 691 GRP1 CR , 1 1/4 CR , 2 1/4 CR , 5 CR , 9CR , 91.
Nickel Alloys Nickel Alloys 200, Nickel Alloys 201
Titanium Grade 1, Grade 4, Grade 5(Ti 6Al-4V), Grade 6(Ti 5Al-2.5Sn), Grade 7, Grade 11, Grade 12, 8Ai-1Mo-1V, Grade 9(3Al-2.5V), 6Al-6V-25n, 6Al-2Sn-4Zr-2Mo, 6Al-7Nb, Grade 23(Ti 6AL-4V ELI), Grade 5 ELI
Inconel Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 , Inconel 690, Inconel 602, Inconel 617, Inconel 925, Inconel A-289, Inconel AL-6XN, AL-904L
Hastelloy Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000, Hastelloy C-4, Hastelloy X, Hastelloy B, Hastelloy N, Hastelloy G
Molybdenum ASTM / ASME A 182 GR F 5, F 9 , F 11 , F 12 , F 22 , F 91, ASTM B387, Ferro Molybdenum
Cobalt Cobalt HS-6, Cobalt HS-4, Cobalt HS-25, Sterlite Grade 1, Sterlite Grade 6, Sterlite Grade 12, Sterlite Grade 21
Niobium ASTM B394, R04200 R04210
Nimonic Nimonic75, Nimonic80, Nimonic85, Nimonic90, Nimonic263, etc
Tungsten W1 WAl1, W61, etc, Carbonide Tungsten, Copper Tungsten, Nickel Tungsten
Nichrome Nichrome90, Nichrome80, Nichrome80A, Nichrome RW80, Nichrome75, etc
Magnesium Magnesium AL017100, AL017140, AL017150, AL017160, AL017200, AL017210, AL017250, etc.
Tantalum Tantalum – Grade 1.
Monel Monel 400, Monel k500
MU-METAL MU-METAL
Zirconium Zirconium 702, Zirconium 705,Zirconium 705, Zirconium-2, Zirconium-4
Beryllium Copper Alloy 25 UNSC17200
Aluminium 1050,1100, 2017, 7150, 7178, 7575, 2050, 7085, 2011 A92011, 2014A A92014, 2024 A92024, 2219, 5052 A95052, 5083 A95083, 5754, 6061 A96061 A86061, 6063, 6082 A96082, 7071 7020, 7050 A97050, 7075 A97075 A87075, 7175
Copper Alloys C 11000, C 10200, C 12200, C 51100, C 51000, C 51900, C 52000, C 52100, C 74500, C 75700, C 75400, C 76400, C 77000, C 21000, C 22000, C 23000, C 24000, C 26000, C 26800, C 27000, C 27200, C 28000

 

Product Stainless Steel Pipes
Type Seamless, Welded, ERW, 100% X-Ray Welded
Size OD (mm) 6.00 to 610.00
Thickness (mm) 0.5mm to 30mm
Length (mm) 6000, 3000, 2000, 12000, Custom Length
Finish Annealed & Pickled, 2B, No.4, Mirror, Polish
Packing Bundled Packing
Services Cutting, Beveling, Threading, Polishing
Stainless Steel Pipes Manufacturing Specifications

stainless steel pipe manufacturers

ASTM A312: Seamless and straight-seam welded austenitic pipe intended for high temperature and general corrosive service. Filler metal not permitted during welding.

ASTM A358: Electric fusion welded austenitic pipe for corrosive and/or high-temperature service. Typically only pipe up to 8 inches is produced to this specification. The addition of filler metal is permitted during welding.

ASTM A790: Seamless and straight-seam welded ferritic/austenitic (duplex) pipe intended for general corrosive service, with a particular emphasis on resistance to stress corrosion cracking.

ASTM A409: Straight-seam or spiral-seam electric fusion welded large diameter austenitic light-wall pipe in sizes 14” to 30” with walls Sch5S and Sch 10S for corrosive and/or high

ASTM A376: Seamless austenitic pipe for high-temperature applications.

ASTM A813: Single-seam, single- or double- welded austenitic pipe for high temperature and general corrosive applications.

ASTM A814: Cold-worked welded austenitic pipe for high temperature and general corrosive service.

stainless steel pipe manufacturers|stainless steel pipe manufacturers|stainless steel pipe manufacturers

If you are looking for the best prices for stainless steel pipes & tubes, email us on [email protected] or call us on +91 22 66518863, +91 9769056007.
Chemical Composition of Stainless Steel Pipes, as per ASTM A312 Manufacturing Standard
A312 GRADES UNS C Mn P S Si Cr Ni Mo Ti Nb N
TP304 S30400 0.08 2 0.045 0.03 1 18.0-20.0 8.0-11.0
TP304L S30403 0.035 2 0.045 0.03 1 18.0-20.0 8.0-13.0
TP304H S30409 0.04-0.10 2 0.045 0.03 1 18.0-20.0 8.0-11.0
TP304N S30451 0.08 2 0.045 0.03 1 18.0-20.0 8.0-18.0 0.10-0.16
TP304LN S30453 0.035 2 0.045 0.03 1 18.0-20.0 8.0-12.0 0.10-0.16
TP309S S30908 0.08 2 0.045 0.03 1 22.0-24.0 12.0-15.0 0.75
TP309H S30909 0.04-0.10 2 0.045 0.03 1 22.0-24.0 12.0-15.0
TP309Cb S30940 0.08 2 0.045 0.03 1 22.0-24.0 12.0-16.0 0.75 10xC min
1.10 max
TP309HCb S30941 0.04-0.10 2 0.045 0.03 1 22.0-24.0 12.0-16.0 0.75 10xC min
1.10 max
TP310S S3108 0.08 2 0.045 0.03 1 24.0-26.0 19.0-22.0 0.75
TP310H S3109 0.04-0.10 2 0.045 0.03 1 24.0-26.0 19.0-22.0
TP310Cb S31040 0.08 2 0.045 0.03 1 24.0-26.0 19.0-22.0 0.75 10xC min
1.10 max
TP310HCb S31041 0.04-0.10 2 0.045 0.03 1 24.0-26.0 19.0-22.0 0.75 10xC min
1.10 max
TP316 S3160 0.08 2 0.045 0.03 1 16.0-18.0 11.0-14.0 2.0-3.0
TP316L S31603 0.035 2 0.045 0.03 1 16.0-18.0 10.0-14.0 2.0-3.0
TP316H S31609 0.04-0.10 2 0.045 0.03 1 16.0-18.0 11.0-14.0 2.0-3.0
TP316Ti S31635 0.08 2 0.045 0.03 0.75 16.0-18.0 10.0-14.0 2.0-3.0 5x 0.1
(C-N)
-0.7
TP316N S31651 0.08 2 0.045 0.03 1 16.0-18.0 10.0-14.0 2.0-3.0 0.10-0.16
TP316LN S31653 0.035 2 0.045 0.03 1 16.0-18.0 11.0-14.0 2.0-3.0 0.10-0.16
TP317 S3170 0.08 2 0.045 0.03 1 18.0-20.0 10.0-14.0 3.0-4.0
TP317L S31703 0.035 2 0.045 0.03 1 18.0-20.0 11.0-15.0 3.0-4.0
TP321 S3210 0.08 2 0.045 0.03 1 17.0-19.0 9.0-12.0 0.1
TP321H S32109 0.04-0.10 2 0.045 0.03 1 17.0-19.0 9.0-12.0 0.1
TP347 S3470 0.08 2 0.045 0.03 1 17.0-19.0 9.0-13.0
TP347H S34709 0.04-0.10 2 0.045 0.03 1 17.0-19.0 9.0-13.0
TP347LN S34751 0.05-0.02 2 0.045 0.03 1 17.0-19.0 9.0-13.0 0.20- 0.06-0.10
50
TP348 S3480 0.08 2 0.045 0.03 1 17.0-19.0 9.0-13.0
TP348H S34809 0.04-0.10 2 0.045 0.03 1 17.0-19.0 9.0-13.0

Mechanical Properties of Stainless Steel Pipes, as per ASTM A312

ASTM A312 Mechanical Properties
Material Heat Temperure Tensile Strength Yield Strength Elongation %, Min
Treatment Min. Ksi (MPa), Min. Ksi (MPa), Min.
º F(º C)
TP304 Solution 1900 (1040) 75(515) 30(205) 35
TP304L Solution 1900 (1040) 70(485) 25(170) 35
TP304H Solution 1900 (1040) 75(515) 30(205) 35
TP310S Solution 1900 (1040) 75(515) 30(205) 35
TP316 Solution 1900(1040) 75(515) 30(205) 35
TP316L Solution 1900(1040) 70(485) 25(170) 35
TP316H Solution 1900(1040) 75(515) 30(205) 35
TP316Ti Solution 1900(1040) 75(515) 30(205) 35
TP321 Solution 1900(1040) 75(515) 30(205) 35
TP321H Solution Cold: 2000(1100) 75(515) 30(205) 35
Hot: 1925(1050)
TP347 Solution 1900(1040) 75(515) 30(205) 35
TP347H Solution Cold: 2000(1100) 75(515) 30(205)
Hot: 1925(1050)

stainless steel pipe manufacturers

By |2021-10-09T15:50:21+05:30January 22nd, 2020|Blogs|

SS 316L Pipe Manufacturers In India

SS 316L Pipe Manufacturers In India

We are leading Manufacturers, Supplier, Dealers, and Exporter of SS 316L Pipe  in India. Our SS 316L Pipe are available in different sizes, shapes, and grades and specifications as per the clients requirements. We supply SS 316L Pipe in most of the major Indian cities in more than 20 States. We Sachiya Steel International offer different types of grades like Stainless Steel Pipes, Super Duplex Pipes, Duplex Pipes, Carbon Steel Pipes, Alloys Steel Pipes, Nickel Alloys Pipes, Aluminium Pipes, etc.

SS 316L Pipe 

Specifications Of SS 316L Pipe:

Specifications : ASTM A/ASME SA213/A249/A269/A312/A358 CL. I to V ASTM A789/A790
Type : Seamless / ERW / Welded / Fabricated / LSAW Pipes
Form : Round, Square, Rectangular, Hydraulic Etc
Length : Single Random, Double Random & Cut Length
Dimensions : ASTM, ASME and API
Size : 1/8″NB TO 30″NB IN
End : Plain End, Beveled End, Treaded

Composition Ranges of Stainless Steel 316L Pipes

Grade C Mn Si P S Cr Mo Ni N
316L min.
max.		 –
0.03		 –
2.0		 –
0.75		 –
0.045		 –
0.03		 16.0
18.0		 2.00
3.00		 10.0
14.0		 –
0.10

Mechanical Properties of Stainless Steel 316L Pipes

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
316L 485 170 40 95 217

Physical Properties of Stainless Steel 316L Pipes

Grade Density
(kg/m3)		 Elastic Modulus
(GPa)		 Mean Co-eff of Thermal Expansion (µm/m/°C) Thermal Conductivity
(W/m.K)		 Specific Heat 0-100°C
(J/kg.K)		 Elec Resistivity
(nΩ.m)
0-100°C 0-315°C 0-538°C At 100°C At 500°C
316/L/H 8000 193 15.9 16.2 17.5 16.3 21.5 500 740

SS 316L Pipe 

Types of Stainless Steel 316L Pipes

Jindal Pipes Limited Make Stainless Steel 316L Seamless Pipe Stainless Steel 316L Welded Pipe
Stainless Steel 316L Fabricated Pipe Nippon Steel Pipes Sumitomo Metals Pipes Make Stainless Steel 316L EFW Pipe
Man Industries India Limited Make Stainless Steel 316L ERW Pipe Stainless Steel 316L Round Pipe
Stainless Steel 316L Square Pipe Mukat Pipes Limited Make Stainless Steel 316L Rectangle Pipe
Stainless Steel 316L Polish Pipe Stainless Steel 316L Seamless Tubes
Stainless Steel 316L Welded Tubes Jindal Saw Ltd. Make Stainless Steel 316L Round Tubes
Kobe steel Pipes Make Stainless Steel 316L Square Tubes Stainless Steel 316L Hollow Pipe
Stainless Steel 316L Bush Pipe Mukat Pipes Limited Make Stainless Steel 316L Electro Polish Tube

SS 316L Pipe may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of SS 316L Pipe may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.

SS 316L Pipe Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 316L Pipe Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

  • EN 10204/3.1B
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc

SS 316L Pipe Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flattening Test
  • Micro and Macro Test
  • Pitting Resistance Test
  • Flaring Test
  • Intergranular Corrosion (IGC) Test

SS 316L Pipe Documentation

  • Commercial Invoice which includes HS Code
  • Packing List including net weight and gross weight, number of boxes, Marks and Numbers
  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Fumigation Certificates
  • Raw Material Test Reports
  • Material Traceability Records
  • Quality Assurance Plan (QAP)
  • Heat Treatment Charts
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Guarantee Letter
  • NABL approved Laboratory Test Reports
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • Form A for the purposes of the Generalized System of Preferences (GSP)

Country’s We Export

Venezuela, Iraq, United Kingdom, Russia, United Arab Emirates, Croatia, Indonesia, Oman, Kazakhstan, Israel, Kenya, Iran, Bahrain, Bhutan, Colombia, Serbia, Pakistan, Czech Republic, Turkey, Ukraine, Poland, Bulgaria, France, Chile, Slovakia, Belgium, Iran, Ireland, Qatar, Sri Lanka, Sweden, Brazil, Bolivia, Taiwan, Jordan, South Africa, Switzerland, Tibet, Norway, India, Ghana, Costa Rica, Hungary, New Zealand, Vietnam, Ecuador, Afghanistan, Algeria, Peru, Netherlands, Argentina, Austria, Malaysia, Thailand, Portugal, Zimbabwe, Mongolia, Lebanon, Trinidad & Tobago, Tunisia, Mexico, Greece, Angola, Hong Kong, Denmark, Nepal, Finland, Chile, Poland, Yemen, Nigeria, Italy, Bangladesh, Australia, Macau, Azerbaijan, Saudi Arabia, Japan, Gabon, Philippines, Singapore, United States, Namibia, Romania, South Korea, Germany, Puerto Rico, Estonia, Morocco, Belarus, Nigeria, Mexico, Spain, China, Canada, Libya, Lithuania, Kuwait, Gambia, Egypt.

By |2024-02-15T16:27:23+05:30January 3rd, 2020|Pipes|

SS 304L Pipe Manufacturers And Suppliers

 

We are leading Manufacturers, Supplier, Dealers, and Exporter of SS 304L Pipe in India. Our SS 304L Pipe are available in different sizes, shapes, and grades and specifications as per the clients requirements. We supply SS 304L Pipe in most of the major Indian cities in more than 20 States. We Sachiya Steel International offer different types of grades like Stainless Steel Pipes, Super Duplex Pipes, Duplex Pipes, Carbon Steel Pipes, Alloys Steel Pipes, Nickel Alloys Pipes, Aluminium Pipes, etc.

 SS 304L Pipe

Specification of SS 304L Pipe:

 

Specifications  ASTM A/ASME SA213/A249/A269/A312/A358 CL. I to V
Thickness 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Type Seamless / ERW / Welded / Fabricated / CDW
Length  Single Random, Double Random & Required Length
Size 1/8″NB TO 30″NB IN
ERW Pipes & Tubes 1/2″ NB – 24″ NB
EFW Pipes & Tubes 6″ NB – 100″ NB
Thickness 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
End Plain End, Beveled End, Treaded

ss 304L pipe

                                                                                    SS 304L Pipe Manufacturers And Suppliers

Mechanical Properties of Stainless Steel 304L Pipe
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304L 485 170 40 92 201
Physical Properties of Stainless Steel 304L Pipe
Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/°C) Thermal Conductivity(W/m.K) Specific Heat 0-100°C(J/kg.K) Electrical Resistivity (n.m)
0-100°C 0-315°C 0-538°C at 100°C at 500°C
304 8000 193 17.2 17.8 18.4 16.2 21.5 500 720
Types of Stainless Steel 304L Pipes
ESW PIPE – GERMANY Make Stainless Steel 304L Seamless Pipe Stainless Steel 30Ll Welded Pipe
Stainless Steel 304L Fabricated Pipe DMV-Stainless-Italia Make Stainless Steel 304L EFW Pipe
Nippon Steel Pipes Sumitomo Metals Pipes Make Stainless Steel 304L ERW Pipe Stainless Steel 304L Round Pipe
Stainless Steel 304L Square Pipe Sanyo Special Steel Pipes Make Stainless Steel 304L Rectangle Pipe
Stainless Steel 304L Polish Pipe Stainless Steel 304L Seamless Tubes
Stainless Steel 304L Welded Tubes Maharashtra Seamless Ltd Make Stainless Steel 304L Round Tubes
Tenaris Pipes Make Stainless Steel 304L Square Tubes Stainless Steel 304L Hollow Pipe
Stainless Steel 304L Bush Pipe ISMT Ltd Make Stainless Steel 304L Tube Coil

 

SS 304L Pipe  may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of SS 304L Pipe  may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.

SS 304L Pipe  Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
SS 304L Pipe Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

  • EN 10204/3.1B.
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc
SS 304L Pipe  Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flattening Test
  • Micro and MacroTest
  • Pitting Resistance Test
  • Flaring Test
  • Intergranular Corrosion (IGC) Test
SS 304L Pipe  Documentation
  • Commercial Invoice which includes HS Code
  • Packing List including net weight and gross weight, number of boxes, Marks and Numbers
  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Fumigation Certificates
  • Raw Material Test Reports
  • Material Traceability Records
  • Quality Assurance Plan (QAP)
  • Heat Treatment Charts
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Guarantee Letter
  • NABL approved Laboratory Test Reports
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • Form A for the purposes of the Generalized System of Preferences (GSP)
Country’s We Export

Venezuela, Iraq, United Kingdom, Russia, United Arab Emirates, Croatia, Indonesia, Oman, Kazakhstan, Israel, Kenya, Iran, Bahrain, Bhutan, Colombia, Serbia, Pakistan, Czech Republic, Turkey, Ukraine, Poland, Bulgaria, France, Chile, Slovakia, Belgium, Iran, Ireland, Qatar, Sri Lanka, Sweden, Brazil, Bolivia, Taiwan, Jordan, South Africa, Switzerland, Tibet, Norway, India, Ghana, Costa Rica, Hungary, New Zealand, Vietnam, Ecuador, Afghanistan, Algeria, Peru, Netherlands, Argentina, Austria, Malaysia, Thailand, Portugal, Zimbabwe, Mongolia, Lebanon, Trinidad & Tobago,Tunisia, Mexico, Greece, Angola, Hong Kong, Denmark, Nepal, Finland, Chile, Poland, Yemen, Nigeria, Italy, Bangladesh, Australia, Macau, Azerbaijan, Saudi Arabia, Japan, Gabon, Philippines, Singapore, United States, Namibia, Romania, South Korea, Germany, Puerto Rico, Estonia, Morocco, Belarus, Nigeria, Mexico, Spain, China, Canada, Libya, Lithuania, Kuwait, Gambia, Egypt.

 

 

By |2020-01-03T15:47:11+05:30January 3rd, 2020|Pipes|

Stainless Steel Tubes

Stainless Steel Tubes Manufacturers In India

We are leading Manufacturers, Supplier, Dealers, and Exporter of Stainless Steel Tubes in India. Our Stainless Steel Tubes are available in different sizes, shapes, and grades. We supply these Tubes in most of the major Indian cities in more than 20 States. We Sachiya Steel International offer different types of grades like Stainless Steel Tubes, Super Duplex Steel Tubes, Duplex Steel Tubes, Carbon Steel Tubes, Alloys Steel Tubes, Nickel Alloys Tubes, Titanium Steel Tubes, Inconel Steel Tubes, Aluminium Tubes, etc.

About Stainless Steel Tubes:

Household and industrial gas lines are usually made of stainless steel tubing as well. If this tubing has eroded, become rusty or broken down due to heat or weathering, then it may be made of galvanized steel, copper or some blend of other metals which all have a shorter shelf life than stainless steel.

 Applications & Uses of Stainless Steel Tubes:

Stainless steel tubing is used in a variety of industries.

  1. It is used in aircraft hydraulic lifts.
  2. These use small amounts of nickel and large percentages of chromium.
  3. Many factories, mills, and production lines use these components for their machines or in the manufactured products.

Stainless Steel Tubes

Stainless steel Tubes Specifications
Schedule SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120,SCH140, SCH160, XXS
Standard ASME/ANSI B16.11, MSS-SP-97, MSS-SP-79, JIS B2316, BS 3799
Tubes Size 1/2″OD TO 8″OD
Type Seamless/ erw/ welded/semi welded in round, square, rectangular, coil form, u shape and hydraulic. Tubes
Grades
Stainless Steel ASTM / ASME 201, 202, 301, 304, 304L, 310, 310S, 316L, 316TI, 317, 317L, 321, 347, 409, 409M, 409L, 410, 410S, 420, 430, 431, 441, 444, 446, 17.4PH, 904L
Super Duplex Steel S32750
Duplex Steel ASTM / ASME SA 790 UNS NO S 31803 , S 32205 , S 32550 , S 32750 , S 32760.
Carbon Steel ASTM / ASME A 335 GRP 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91
Alloys Steel ASTM / ASME A 691 GRP1 CR , 1 1/4 CR , 2 1/4 CR , 5 CR , 9CR , 91.
Nickel Alloys Nickel Alloys 200, Nickel Alloys 201
Titanium Grade 1, Grade 4, Grade 5(Ti 6Al-4V), Grade 6(Ti 5Al-2.5Sn), Grade 7, Grade 11, Grade 12, 8Ai-1Mo-1V, Grade 9(3Al-2.5V), 6Al-6V-25n, 6Al-2Sn-4Zr-2Mo, 6Al-7Nb, Grade 23(Ti 6AL-4V ELI), Grade 5 ELI
Inconel Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 , Inconel 690, Inconel 602, Inconel 617, Inconel 925, Inconel A-289, Inconel AL-6XN, AL-904L
Hastelloy Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000, Hastelloy C-4, Hastelloy X, Hastelloy B, Hastelloy N, Hastelloy G
Molybdenum ASTM / ASME A 182 GR F 5, F 9 , F 11 , F 12 , F 22 , F 91, ASTM B387, Ferro Molybdenum
Cobalt Cobalt HS-6, Cobalt HS-4, Cobalt HS-25, Sterlite Grade 1, Sterlite Grade 6, Sterlite Grade 12, Sterlite Grade 21
Niobium ASTM B394, R04200 R04210
Nimonic Nimonic75, Nimonic80, Nimonic85, Nimonic90, Nimonic263, etc
Tungsten W1 WAl1, W61, etc, Carbonite Tungsten, Copper Tungsten, Nickel Tungsten
Nichrome Nichrome90, Nichrome80, Nichrome80A, Nichrome RW80, Nichrome75, etc
Magnesium Magnesium AL017100, AL017140, AL017150, AL017160, AL017200, AL017210, AL017250, etc.
Tantalum Tantalum – Grade 1.
Monel Monel 400, Monel k500
MU-METAL MU-METAL
Zirconium Zirconium 702, Zirconium 705,Zirconium 705, Zirconium-2, Zirconium-4
Beryllium Copper Alloy 25 UNSC17200
Aluminium 1050,1100, 2017, 7150, 7178, 7575, 2050, 7085, 2011 A92011, 2014A A92014, 2024 A92024, 2219, 5052 A95052, 5083 A95083, 5754, 6061 A96061 A86061, 6063, 6082 A96082, 7071 7020, 7050 A97050, 7075 A97075 A87075, 7175
Copper Alloys C 11000, C 10200, C 12200, C 51100, C 51000, C 51900, C 52000, C 52100, C 74500, C 75700, C 75400, C 76400, C 77000, C 21000, C 22000, C 23000, C 24000, C 26000, C 26800, C 27000, C 27200, C 28000
By |2024-02-14T18:26:22+05:30September 17th, 2019|Tubes|

Steel Pipes

Steel Pipes Manufacturers In India

We are leading Manufacturers, Supplier, Dealers, and Exporter of Steel Pipes in India. Our Steel Pipes are available in different sizes, shapes, and grades. We supply these Pipes in most of the major Indian cities in more than 20 States. We Sachiya Steel International offer different types of grades like Stainless Steel Pipes, Super Duplex Pipes, Duplex  Pipes, Carbon Steel Pipes, Alloys Steel Pipes, Nickel Alloys Pipes, Titanium , Aluminium Pipes, etc.

About Steel Pipes

Steel pipes are long, hollow Pipes that are used for a variety of purposes. Stainless Steel pipe and Pipes have excellent corrosion resistance and smooth finishing characteristics. The corrosion resistance of the welded steel pipe is the same as the base metal and the strength higher than the base metal. For these reasons, they are used in demanding industries.

Applications of Steel Pipes

  • Textile Machinery
  • Chemicals
  • Fertilizers
  • Dairy and Food Processing
  • Power Plants
  • Pesticides
  • Construction
  • Modern Architecture
  • Pharmaceuticals
  • Sugar

Steel Pipes

Steel Pipes Specifications
Schedule SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120,SCH140, SCH160, XXS
Standard ASME/ANSI B16.11, MSS-SP-97, MSS-SP-79, JIS B2316, BS 3799
Pipes Size 1/8″NB to 24″NB & 1/4″OD TO 24″OD AND 6.35mm to 254mm OD Thickness: 0.6mm to 20mm
Type Seamless/ erw/ welded/semi welded in round, square, rectangular, coil form, u shape and hydraulic. Pipes
Grades
Stainless Steel ASTM / ASME 201, 202, 301, 304, 304L, 310, 310S, 316L, 316TI, 317, 317L, 321, 347, 409, 409M, 409L, 410, 410S, 420, 430, 431, 441, 444, 446, 17.4PH, 904L
Super Duplex Steel S32750
Duplex Steel ASTM / ASME SA 790 UNS NO S 31803 , S 32205 , S 32550 , S 32750 , S 32760.
Carbon Steel ASTM / ASME A 335 GRP 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91
Alloys Steel ASTM / ASME A 691 GRP1 CR , 1 1/4 CR , 2 1/4 CR , 5 CR , 9CR , 91.
Nickel Alloys Nickel Alloys 200, Nickel Alloys 201
Titanium Grade 1, Grade 4, Grade 5(Ti 6Al-4V), Grade 6(Ti 5Al-2.5Sn), Grade 7, Grade 11, Grade 12, 8Ai-1Mo-1V, Grade 9(3Al-2.5V), 6Al-6V-25n, 6Al-2Sn-4Zr-2Mo, 6Al-7Nb, Grade 23(Ti 6AL-4V ELI), Grade 5 ELI
Inconel Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 , Inconel 690, Inconel 602, Inconel 617, Inconel 925, Inconel A-289, Inconel AL-6XN, AL-904L
Hastelloy Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000, Hastelloy C-4, Hastelloy X, Hastelloy B, Hastelloy N, Hastelloy G
Molybdenum ASTM / ASME A 182 GR F 5, F 9 , F 11 , F 12 , F 22 , F 91, ASTM B387, Ferro Molybdenum
Cobalt Cobalt HS-6, Cobalt HS-4, Cobalt HS-25, Sterlite Grade 1, Sterlite Grade 6, Sterlite Grade 12, Sterlite Grade 21
Niobium ASTM B394, R04200 R04210
Nimonic Nimonic75, Nimonic80, Nimonic85, Nimonic90, Nimonic263, etc
Tungsten W1 WAl1, W61, etc, Carbonite Tungsten, Copper Tungsten, Nickel Tungsten
Nichrome Nichrome90, Nichrome80, Nichrome80A, Nichrome RW80, Nichrome75, etc
Magnesium Magnesium AL017100, AL017140, AL017150, AL017160, AL017200, AL017210, AL017250, etc.
Tantalum Tantalum – Grade 1.
Monel Monel 400, Monel k500
MU-METAL MU-METAL
Zirconium Zirconium 702, Zirconium 705,Zirconium 705, Zirconium-2, Zirconium-4
Beryllium Copper Alloy 25 UNSC17200
Aluminium 1050,1100, 2017, 7150, 7178, 7575, 2050, 7085, 2011 A92011, 2014A A92014, 2024 A92024, 2219, 5052 A95052, 5083 A95083, 5754, 6061 A96061 A86061, 6063, 6082 A96082, 7071 7020, 7050 A97050, 7075 A97075 A87075, 7175
Copper Alloys C 11000, C 10200, C 12200, C 51100, C 51000, C 51900, C 52000, C 52100, C 74500, C 75700, C 75400, C 76400, C 77000, C 21000, C 22000, C 23000, C 24000, C 26000, C 26800, C 27000, C 27200, C 28000

 

By |2024-02-15T12:25:41+05:30September 17th, 2019|Pipes|

SACHIYA STEEL INTERNATIONAL

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top