Aluminum Pipe
Aluminum pipe Manufacturer In India
Sachiya Steel International offers a wide range of aluminum pipe that helps prevent the peeling of the protective layer. These 6061 aluminum seamless tubes are a great option when there is a problem of corrosion cracking under the influence of chloride, which is resistant to pitting and crevice corrosion. Our 6082 aluminum welded pipes are also used for processing pharmaceuticals, food, gasoline, solvents, plastics, explosives, synthetic fibers, and many other products.
Sachiya Steel International is the manufacturer of these 5083 EFW aluminum pipes, where we also serve many industries. The zone of our 5086 aluminum ERW aluminum pipes quickly forms when exposed to high temperatures until it reaches a thickness of 0.001 to 0.002 inches. The oxide zone of these 5052 aluminum round tubes provides the proper diffusion conditions to form a protective layer of chromium oxide on the metal surface.
Sachiya Steel International is one of the prominent suppliers and dealers of our 6063 aluminum square pipes , which also retain good strength and toughness at cryogenic temperatures. These 7075 aluminum rectangular pipe maintain nearly constant dimensions in the normal atmospheric temperature range and have a low coefficient of expansion from cryogenic temperatures to about 500 degrees Fahrenheit. Our 11000 aluminum electro-polished pipes can be hot and cold formed and processed using processes similar to austenitic stainless steels. These 6061 aluminum hexagonal pipes are welded using filler metal, which is available as bare wire for GTAW and GMAW processes.
Aluminum pipes Specification
Standard | : | ASTM / ASME SB 221 |
Size | : | 8 (1-1/2″ / 1.900″) |
Outer Diameter | : | 1″ through 16″ |
Thickness | : | Schedule 40 |
Grade | : | 2024, 5083, 5086, 6061, 6063, 7075 |
Type | : | Seamless / ERW / Welded / Fabricated / LSAW Pipes |
Form | : | Round, Square, Rectangular, Hydraulic Etc. |
End | : | Plain End, Bevelled End, Treaded |
Length | : | Single Random, Double Ranidom & Cut Length |
Grades | 6063, 6061T6/T651, 6082 T6/T651, 5052, 5083, 5086, 7075, 1100, 2014, 2024 | |
Type | Seamless | |
Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom | |
Range | ½”NB to 48″NB in Sch 10s, 40s, 80s, 160s, XXS, Other Custom Sizes | |
Dimensions |
|
7×5 | 14×12 | 25×19 | 38×32 | 50×44 | 85×75 |
8×6 | 19×17 | 32×28.5 | 45×25 | 51×25 | 101×91 |
10×8 | 22×19 | 38×34 | 50×46 | 76×70 | 115×97 |
12.5×10 | 25×22 | 38×34 | 50×46 | 76×57 | 160×140 |
Si | Fe | Cu | Zn | Mn | Mg | Ti | Cr | Al | Others(Total) | |
0.40 – 0.80 | 0.70 max | 0.15-0.40 | 0.25 max | 0.15 | 0.8-1.2 | 0.15 max | 0.04-0.35 | Balance |
|
Temper | Tensile | Hardness | |||||
Ultimate | Yield | Elongation | Brinell | ||||
KSI | MPA | KSI | MPA | % | |||
T6, T651 | 45 | 310 | 21 | 145 | 25 |
|
aluminum steel pipes may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of Alloy 20 Seamless Pipe may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.
- Off-Shore Oil Drilling Companies
Power Generation
Petrochemicals
Gas Processing
Specialty Chemicals
Pharmaceuticals
Pharmaceutical Equipment
Chemical Equipment
Sea Water Equipment
Heat Exchangers
Condensers
Pulp and Paper Industry
Aluminium Pipe Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance with EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRITE CONTENT as per norms if requested by clients.
- EN 10204/3.1B,
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
- Mechanical Testing Such as Tensile of Area
Hardness Test
Chemical Analysis – Spectro Analysis
Positive Material Identification – PMI Testing
Flattening Test
Micro and MacroTest
Pitting Resistance Test
Flaring Test
Intergranular Corrosion (IGC) Test
Documentation
- Commercial Invoice which includes HS Code
Packing List including net weight and gross weight, number of boxes, Marks and Numbers
Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
Fumigation Certificates
Raw Material Test Reports
Material Traceability Records
Quality Assurance Plan (QAP)
Heat Treatment Charts
Test Certificates certifying NACE MR0103, NACE MR0175
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
Guarantee Letter
NABL approved Laboratory Test Reports
Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
Form A for the purposes of the Generalized System of Preferences (GSP)
Country’s We Export
Venezuela, Iraq, United Kingdom, Russia, United Arab Emirates, Croatia, Indonesia, Oman, Kazakhstan, Israel, Kenya, Iran, Bahrain, Bhutan, Colombia, Serbia, Pakistan, Czech Republic, Turkey, Ukraine, Poland, Bulgaria, France, Chile, Slovakia, Belgium, Iran, Ireland, Qatar, Sri Lanka, Sweden, Brazil, Bolivia, Taiwan, Jordan, South Africa, Switzerland, Tibet, Norway, India, Ghana, Costa Rica, Hungary, New Zealand, Vietnam, Ecuador, Afghanistan, Algeria, Peru, Netherlands, Argentina, Austria, Malaysia, Thailand, Portugal, Zimbabwe, Mongolia, Lebanon, Trinidad & Tobago, Tunisia, Mexico, Greece, Angola, Hong Kong, Denmark, Nepal, Finland, Chile, Poland, Yemen, Nigeria, Italy, Bangladesh, Australia, Macau, Azerbaijan, Saudi Arabia, Japan, Gabon, Philippines, Singapore, United States, Namibia, Romania, South Korea, Germany, Puerto Rico, Estonia, Morocco, Belarus, Nigeria, Mexico, Spain, China, Canada, Libya, Lithuania, Kuwait, Gambia, Egypt.