Aluminum pipe Manufacturer In India 

Sachiya Steel International offers a wide range of aluminum pipe that helps prevent the peeling of the protective layer. These 6061 aluminum seamless tubes are a great option when there is a problem of corrosion cracking under the influence of chloride, which is resistant to pitting and crevice corrosion. Our 6082 aluminum welded pipes are also used for processing pharmaceuticals, food, gasoline, solvents, plastics, explosives, synthetic fibers, and many other products.

aluminum PipeSachiya Steel International is the manufacturer of these 5083 EFW aluminum pipes, where we also serve many industries. The zone of our 5086 aluminum ERW aluminum pipes quickly forms when exposed to high temperatures until it reaches a thickness of 0.001 to 0.002 inches. The oxide zone of these 5052 aluminum round tubes provides the proper diffusion conditions to form a protective layer of chromium oxide on the metal surface.

Sachiya Steel International is one of the prominent suppliers and dealers of our 6063 aluminum square pipes , which also retain good strength and toughness at cryogenic temperatures. These 7075 aluminum rectangular pipe maintain nearly constant dimensions in the normal atmospheric temperature range and have a low coefficient of expansion from cryogenic temperatures to about 500 degrees Fahrenheit. Our 11000 aluminum electro-polished pipes can be hot and cold formed and processed using processes similar to austenitic stainless steels. These 6061 aluminum hexagonal pipes are welded using filler metal, which is available as bare wire for GTAW and GMAW processes.

Aluminum pipes Specification

Standard : ASTM / ASME SB 221
Size : 8 (1-1/2″ / 1.900″)
Outer Diameter : 1″ through 16″
Thickness : Schedule 40
Grade : 2024, 5083, 5086, 6061, 6063, 7075
Type : Seamless / ERW / Welded / Fabricated / LSAW Pipes
Form : Round, Square, Rectangular, Hydraulic Etc.
End : Plain End, Bevelled End, Treaded
Length : Single Random, Double Ranidom & Cut Length

Aluminium Pipe Fittings Production Range

Grades 6063, 6061T6/T651, 6082 T6/T651, 5052, 5083, 5086, 7075, 1100, 2014, 2024
Type             Seamless
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Range ½”NB to 48″NB in Sch 10s, 40s, 80s, 160s, XXS, Other Custom Sizes
Dimensions
ANSI/ASME B16.9, B16.28, MSS-SP-43

 

Sizes (In mm) 

  7×5 14×12 25×19 38×32 50×44 85×75
  8×6 19×17 32×28.5 45×25 51×25 101×91
  10×8 22×19 38×34 50×46 76×70 115×97
12.5×10 25×22 38×34 50×46 76×57 160×140

Aluminium Pipe Chemical Composition

Si Fe Cu Zn Mn Mg Ti Cr Al Others(Total)
0.40 – 0.80 0.70 max 0.15-0.40 0.25 max 0.15 0.8-1.2 0.15 max 0.04-0.35 Balance
0.15 max

Mechanical Properties for Aluminium Pipe

Temper Tensile Hardness
Ultimate Yield Elongation Brinell
KSI MPA KSI MPA %
T6, T651 45 310 21 145 25
65

Aluminium  Pipe Packaging

Stainless Steel Pipe Packed 2 steel bar packing

aluminum steel pipes may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of Alloy 20 Seamless Pipe may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.

Aluminium Pipe Application Industries

  • Off-Shore Oil Drilling Companies
    Power Generation
    Petrochemicals
    Gas Processing
    Specialty Chemicals
    Pharmaceuticals
    Pharmaceutical Equipment
    Chemical Equipment
    Sea Water Equipment
    Heat Exchangers
    Condensers
    Pulp and Paper Industry

Aluminium Pipe Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance with EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRITE CONTENT as per norms if requested by clients.

  • EN 10204/3.1B,
    Raw Materials Certificate
    100% Radiography Test Report
    Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

  • Mechanical Testing Such as Tensile of Area
    Hardness Test
    Chemical Analysis – Spectro Analysis
    Positive Material Identification – PMI Testing
    Flattening Test
    Micro and MacroTest
    Pitting Resistance Test
    Flaring Test
    Intergranular Corrosion (IGC) Test

Documentation

  • Commercial Invoice which includes HS Code
    Packing List including net weight and gross weight, number of boxes, Marks and Numbers
    Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
    Fumigation Certificates
    Raw Material Test Reports
    Material Traceability Records
    Quality Assurance Plan (QAP)
    Heat Treatment Charts
    Test Certificates certifying NACE MR0103, NACE MR0175
    Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
    Guarantee Letter
    NABL approved Laboratory Test Reports
    Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
    Form A for the purposes of the Generalized System of Preferences (GSP)

Country’s We Export

Venezuela, Iraq, United Kingdom, Russia, United Arab Emirates, Croatia, Indonesia, Oman, Kazakhstan, Israel, Kenya, Iran, Bahrain, Bhutan, Colombia, Serbia, Pakistan, Czech Republic, Turkey, Ukraine, Poland, Bulgaria, France, Chile, Slovakia, Belgium, Iran, Ireland, Qatar, Sri Lanka, Sweden, Brazil, Bolivia, Taiwan, Jordan, South Africa, Switzerland, Tibet, Norway, India, Ghana, Costa Rica, Hungary, New Zealand, Vietnam, Ecuador, Afghanistan, Algeria, Peru, Netherlands, Argentina, Austria, Malaysia, Thailand, Portugal, Zimbabwe, Mongolia, Lebanon, Trinidad & Tobago, Tunisia, Mexico, Greece, Angola, Hong Kong, Denmark, Nepal, Finland, Chile, Poland, Yemen, Nigeria, Italy, Bangladesh, Australia, Macau, Azerbaijan, Saudi Arabia, Japan, Gabon, Philippines, Singapore, United States, Namibia, Romania, South Korea, Germany, Puerto Rico, Estonia, Morocco, Belarus, Nigeria, Mexico, Spain, China, Canada, Libya, Lithuania, Kuwait, Gambia, Egypt.