Alloy wire mesh standard sizes Archives - Steel Pipes/Tubes Manufacturers, Top Pipe Suppliers


 

Sachiya Steel International is one of the leading Manufacturer And Exporter Of High Quality Titanium Gr 2 Wire Mesh, which are unalloyed Commercially Pure (CP) Titanium. Our Titanium Grade 2 Hexagonal Wire Mesh is used based on the corrosion resistance, ductility and strength requirements of the specific application. Titanium Grade 2 Welding Wire Mesh is called the “workhorse” of the commercially pure titanium industry, thanks to its varied usability and wide availability. This film makes the commercially pure Titanium Grade 2 Netting Wire Mesh which are resistant to most oxidizing, neutral and inhibited reducing as well as mildly reducing environments.

Titanium Gr 2 Wire Mesh Manufacturer In India| Titanium Gr 2 Wire Mesh Manufacturer In Mumbai| Titanium Gr 2 Wire Mesh Exporter In India| Titanium Gr 2 Wire Mesh Exporter In Mumbai | Titanium Gr 2 Wire Mesh Supplier In India| Titanium Gr 2 Wire Mesh Supplier In Mumbai | Titanium Gr 2 Wire Mesh Stockist In India| Titanium Gr 2 Wire Mesh Stockist In Mumbai

Titanium Grade 2 Woven Wire Mesh is often used in Aerospace industry, Chemical and marine applications, Electroplating industry, and Medical industry. Although “commercially pure”, Titanium Grade 2 Spring Steel Wire Mesh has acceptable mechanical properties and has been used for orthopedic and dental implants.

Titanium Gr 2 Wire Mesh
Titanium Gr 2 Wire Mesh

For most applications, Titanium Grade 2 Fencing Wire Mesh is alloyed with small amounts of aluminum and vanadium, typically 6 % and 4 % respectively, by weight. Ti Alloy Gr. 2 Wire Mesh is the most commonly used Titanium worldwide and is the most commonly used alloy in the oilfield. Ti Alloy Gr. 2 Hexagonal Wire Mesh can easily be cold rolled, but cold drawing is very difficult because of frequent seizing on the die. Ti Alloy Gr. 2 Welding Wire Mesh is used in a variety of industries such as chemical, marine, medical, recreational, and aerospace.

Titanium Gr 2 Wire mesh Specifications

Specifications : ASTM B348 / ASME SB348
Standard : ASTM, ASME
Size : Dia6.0-200mm x Length1000-6000mm
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.

Titanium Gr 2 Wire Mesh Chemical Composition

Grade Ti C Fe H N O Al V
Ti Grade2 99.2 min 0.1 max 0.3 max 0.015 max 0.03 max 0.25 max

Ti Gr 2 Wire mesh Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 2 4.5 g/cm3 1665 °C (3030 °F) Psi – 49900 , MPa – 344 Psi – 39900 , MPa – 275 20 %

Equivalent Grades for Gr 2 Titanium Wire mesh

STANDARD WERKSTOFF NR. UNS
Titanium Grade2 3.7035 R50400

Ti Gr 2 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Gr 2 Titanium Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Titanium Gr 2 Wire Mesh
Titanium Gr 2 Wire Mesh Manufacturer

Sachiya Steel International is one of the leading Manufacturer And Exporter Of High Quality Titanium Gr 2 Wire Mesh, which are unalloyed Commercially Pure (CP) Titanium. Our Titanium Grade 2 Hexagonal Wire Mesh is used based on the corrosion resistance, ductility and strength requirements of the specific application.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5


 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Wire Mesh, which is the low carbon variant of Ni 200. The larger part of Nickel 201 Hexagonal Wire Mesh that is released to the environment will adsorb to sediment or soil particles and become immobile as a result. Nickel 201 Welding Wire Mesh can also end up in surface water when it is a part of waste water streams. Nickel 201 Netting Wire Mesh is primarily used for parts that require strong magnetic properties and excellent corrosion resistance. Nickel 201 Woven Wire Mesh is pure wrought Nickel with high ductile capabilities.

Nickel Alloy 201 Wire Mesh Manufacturer In India| Nickel Alloy 201 Wire Mesh Manufacturer In Mumbai| Nickel Alloy 201 Wire Mesh Exporter In India| Nickel Alloy 201 Wire Mesh Exporter In Mumbai | Nickel Alloy 201 Wire Mesh Supplier In India| Nickel Alloy 201 Wire Mesh Supplier In Mumbai| Nickel Alloy 201 Wire Mesh Stockist In India| Nickel Alloy 201 Wire Mesh Stockist In Mumbai

Nickel 201 Spring Steel Wire Mesh is ferromagnetic and has high levels of thermal and electrical conductivity. Nickel 201 Fencing Wire Mesh can be used in reducing and oxidizing environments. Alloy 201 Wire Mesh is virtually immune to stress cracking corrosion, and thus is ideal for use in both fresh and seawater processes.

Nickel Alloy 201 Wire Mesh
Nickel Alloy 201 Wire Mesh

At the end of their useful life, nickel – containing products such as Ni 201 Wire Mesh can be collected and recycled for future use and re – use. Ni 201 Hexagonal Wire Mesh is one of the most recycled materials globally, where it is collected and recycled, mostly in the form of alloys. Phenol is commonly stored and transported in steel tanks and tank cars because Ni 201 Welding Wire Mesh protects the phenol from contamination and discoloration.

Nickel 201 Wire mesh Specifications

Specifications : ASTM / ASME B160 / SB160
Standard : ASTM, ASME
Length : 100 mm To 3000 mm Long & Above
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.

Nickel 201 Wire Mesh Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Nickel 201 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Alloy 201 Wire mesh Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 201 Nickel Wire mesh

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 LC-Ni 99

Alloy 201 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

201 Nickel Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Nickel Alloy 201 Wire Mesh
Nickel Alloy 201 Wire Mesh Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Wire Mesh, which is the low carbon variant of Ni 200. The larger part of Nickel 201 Hexagonal Wire Mesh that is released to the environment will adsorb to sediment or soil particles and become immobile as a result. Nickel 201 Welding Wire Mesh can also end up in surface water when it is a part of waste water streams.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5


 

Sachiya steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Wire Mesh, where its velocity depends on geometry and pipe diameter. In seawater, Nickel 200 Hexagonal Wire Mesh has excellent corrosion rates which remain low as long as the maximum design flow velocity is not exceeded. Nickel 200 Welding Wire Mesh has high resistance to crevice corrosion, stress corrosion cracking and hydrogen embrittlement that can be troublesome to other alloy systems. Nickel 200 Netting Wire Mesh naturally form a thin protective surface layer over the first several weeks of exposure to seawater and this provides its on-going resistance.

Nickel Alloy 200 Wire Mesh Manufacturer In India| Nickel Alloy 200 Wire Mesh Manufacturer In Mumbai | Nickel Alloy 200 Wire Mesh Exporter In India| Nickel Alloy 200 Wire Mesh Exporter In Mumbai| Nickel Alloy 200 Wire Mesh Supplier In India| Nickel Alloy 200 Wire Mesh Supplier In Mumbai | Nickel Alloy 200 Wire Mesh Stockist In India| Nickel Alloy 200 Wire Mesh In Mumbai

Additionally, Nickel 200 Woven Wire Mesh have a high inherent bio – fouling resistance to attachment by macro – foulers (e.g. sea – grasses and molluscs) living in the seawater. To use its property to full potential, Nickel 200 Spring Steel Wire Mesh needs to be free of the effects of, or insulated from, any form of cathodic protection. Our Nickel 200 Fencing Wire Mesh can show high corrosion rates in polluted or stagnant seawater when sulphide or ammonia are present.

Nickel Alloy 200 Wire Mesh
Nickel Alloy 200 Wire Mesh

Alloy 200 Hexagonal Wire Mesh is important, therefore, to avoid exposure to such conditions, particularly during commissioning and refit while the surface films are maturing. Ferrous sulphide in our Alloy 200 Welding Wire Mesh dosing to sea water systems can provide improved resistance, which is possible by both welding and brazing.

Nickel 200 Wire mesh Specifications

Specifications : ASTM / ASME B160 / SB160
Standard : ASTM, ASME
Length : 100 mm To 3000 mm Long & Above
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.

Nickel 200 Wire Mesh Chemical Composition

Nickel 200 Ni C Mo Mn Si Fe P S Cu Cr
99.0 min 0.15 max 0.35 max 0.1 max 0.4 max 0.01 max 0.25 max

Alloy 200 Wire mesh Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 21500 , MPa – 148 Psi – 67000 , MPa – 462 45 %

Equivalent Grades for 200 Nickel Wire mesh

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Nickel 200 N02200 2.4066 N-100M Ni 99.2 NW 2200 NA 11 НП-2

Alloy 200 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

200 Nickel Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Nickel Alloy 200 Wire Mesh
Nickel Alloy 200 Wire Mesh Manufacturer

Sachiya steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Wire Mesh, where its velocity depends on geometry and pipe diameter. In seawater, Nickel 200 Hexagonal Wire Mesh has excellent corrosion rates which remain low as long as the maximum design flow velocity is not exceeded.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5


 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Wire Mesh, where maximum attainable surface hardness depends primarily on carbon content. However, content alloying elements of Monel 400 Hexagonal Wire Mesh influence the overall characteristics, where these alloying elements primarily influence hardenability. Maximum hardness and strength in small sections of Monel 400 Welding Wire Mesh increase as carbon content increases, up to about 0.7 %. Contents in Monel 400 Netting Wire Mesh greater than 0.3 % can increase the possibility of cracking during quenching or welding.

Monel Alloy 400 Wire Mesh Manufacturer In India | Monel Alloy 400 Wire Mesh Manufacturer In Mumbai | Monel Alloy 400 Wire Mesh Exporter In India | Monel Alloy 400 Wire Mesh Exporter In Mumbai | Monel Alloy 400 Wire Mesh Supplier In India | Monel Alloy 400 Wire Mesh Supplier In India | Monel Alloy 400 Wire Mesh Supplier In Mumbai | Monel Alloy 400 Wire Mesh Stockist In India | Monel Alloy 400 Wire Mesh Stockist In India

Monel 400 Woven Wire Mesh also influences other mechanical and fabrication properties including toughness and machinability. Monel 400 Spring Steel Wire Mesh is often specified when high strength is needed in moderate – to – large sections. Whether tensile or yield strength is the basis of design, thermally treated Monel 400 Fencing Wire Mesh generally offer high strength – to – weight ratios. For applications requiring maximum ductility, Alloy 400 Hexagonal Wire Mesh with low Sulphur levels can be supplied by producers using ladle – refining techniques.

Monel Alloy 400 Wire Mesh
Monel Alloy 400 Wire Mesh

The low carbon in Alloy 400 Welding Wire Mesh provides resistance to sensitization during welding and other thermal processes. Alloy 400 Netting Wire Mesh does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid. In general, wear resistance can be improved by increasing the hardness of Alloy 400 Woven Wire Mesh, by specifying an alloy with greater carbon content (without increasing hardness), or by both.

Monel 400 Wire mesh Specifications

Specifications : ASTM / ASME B164 / SB164
Standard : ASTM, ASME
Size : 15NB to 150NB In
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.

Monel 400 Wire Mesh Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Monel 400 0.30 max 2.00 max 0.50 max 0.24max 28.0-34.0 2.50 max 63.00 min

Alloy 400 Wire mesh Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %

Equivalent Grades for 400 Monel Wire mesh

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Monel 400 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe

Alloy 400 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

400 Monel Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Monel Alloy 400 Wire Mesh
Monel Alloy 400 Wire Mesh Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Wire Mesh, where maximum attainable surface hardness depends primarily on carbon content. However, content alloying elements of Monel 400 Hexagonal Wire Mesh influence the overall characteristics, where these alloying elements primarily influence hardenability

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5


 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy B2 Wire Mesh, which offers resistance to pitting corrosion. Our Hastelloy B2 Hexagonal Wire Mesh should not be used in oxidizing media or where oxidizing contaminants are available in reducing media. Premature failure may occur if this Hastelloy B2 Welding Wire Mesh is used where iron or copper is present in a system containing hydrochloric acid. Wrought forms of our Hastelloy B2 Netting Wire Mesh are furnished in the solution heat – treated condition unless otherwise specified.

Hastelloy B2 Wire Mesh Manufacturer In India| Hastelloy B2 Wire Mesh Manufacturer In Mumbai | Hastelloy B2 Wire Mesh Exporter In India| Hastelloy B2 Wire Mesh Exporter In Mumbai | Hastelloy B2 Wire Mesh Supplier In India| Hastelloy B2 Wire Mesh Supplier In Mumbai | Hastelloy B2 Wire Mesh Stockist In India| Hastelloy B2 Wire Mesh Stockist In Mumbai

This Hastelloy B2 Woven Wire Mesh, except for bright annealed sheet and strip, is solution heat – treated at 1950 Degree F (1066 Degree C) and rapid quenched. Bright annealed products such as our Hastelloy B2 Spring Steel Wire Mesh are heat – treated at 2100 Degree F (1149 Degree C) and cooled in hydrogen. Because Hastelloy B2 Fencing Wire Mesh contains no significant chromium addition, it should NOT be used in oxidizing media or in presence of oxidizing salts, such as ferric or cupric salts.

Hastelloy B2 Wire Mesh
Hastelloy B2 Wire Mesh

Our Alloy B2 Wire Mesh may form when iron or copper is present in a system containing hydrochloric acid. Likewise, this Alloy B2 Hexagonal Wire Mesh does not withstand wet chlorine gas or hypochlorite bleach. In oxidizing gases such as air, our Alloy B2 Welding Wire Mesh may be used at temperatures up to 1000 Degree F (538 Degree C).

Hastelloy B2 Wire mesh Specifications

Specifications : ASTM / ASME B335 / SB335
Standard : ASTM, ASME
Size : 15NB to 150NB In
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.

Hastelloy B2 Wire Mesh Chemical Composition

Hastelloy B2 Ni C Mo Mn Si Fe P S Co Cr
Balance 0.02 max 26.0-30.0 1.0 max 0.10 max 2.0 max 0.040 max 0.030 max 1.0 max 1.0 max

Alloy B2 Wire mesh Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
9.2 g/cm3 1370 °C (2500 °F) Psi – 51,000, MPa – 350 Psi -1,10,000, MPa -760 40 %

Equivalent Grades for B2 Hastelloy Wire mesh

STANDARD UNS WERKSTOFF NR.
Hastelloy B2 N10665 2.4617

Alloy B2 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

B2 Hastelloy Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Hastelloy B2 Wire Mesh
Hastelloy B2 Wire Mesh Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy B2 Wire Mesh, which offers resistance to pitting corrosion. Our Hastelloy B2 Hexagonal Wire Mesh should not be used in oxidizing media or where oxidizing contaminants are available in reducing media.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5


 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy C276 Wire Mesh, where an in – process anneal may be necessary with a high degree of cold working. Hastelloy C276 Hexagonal Wire Mesh should preferably be machined in the annealed condition, where a post weld heat treatment is not necessary. Since Alloy C276 Welding Wire Mesh is prone to work – hardening, only low cutting speeds should be used and the cutting tool should be engaged at all times. Hastelloy C276 Netting Wire Mesh can be readily welded by most standard processes including GTAW (TIG), PLASMA, GMAW (MIG / MAG) and SMAW (MMA).

Hastelloy C276 Wire Mesh Manufacturer In India | Hastelloy C276 Wire Mesh Manufacturer In Mumbai | Hastelloy C276 Wire Mesh Exporter In India | Hastelloy C276 Wire Mesh Exporter In Mumbai | Hastelloy C276 Wire Mesh Supplier In India | Hastelloy C276 Wire Mesh Supplier In Mumbai | Hastelloy C276 Wire Mesh Stockist In India | Hastelloy C276 Wire Mesh Stockist In Mumbai

Hastelloy C276 Woven Wire Mesh should be in the annealed condition for cold working. Hastelloy C276 Spring Steel Wire Mesh has a higher work – hardening rate than the austenitic stainless steels which should be taken into consideration. The corrosion – resistant of Hastelloy C276 Fencing Wire Mesh are widely used by the chemical processing industries.

Hastelloy C276 Wire Mesh
Hastelloy C276 Wire Mesh

The need for reliable performance leads to the acceptance and growth of Alloy C276 Hexagonal Wire Mesh in the areas of geothermal, solar energy, oil and gas and pharmaceutical. The benefits of process equipment of Alloy C276 Welding Wire Mesh include high resistance to uniform attack, outstanding localized corrosion resistance, excellent stress corrosion cracking resistance, and ease of welding and fabrication. Do not forge this Alloy C276 Netting Wire Mesh below 1700 Degree F (927 Degree C).

Hastelloy C276 Wire mesh Specifications

Specifications : ASTM / ASME B574 / SB574
Standard : ASTM, ASME
Size : 15NB to 150NB In
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.

Hastelloy C276 Wire Mesh Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
C276 0.010 max 1.00 max 0.08 max 0.03 max 2.50 max 50.99 min* 14.50 – 16.50 4.00 – 7.00 15.00 – 17.00 0.04 max

Alloy C276 Wire mesh Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C276 8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40 %

Equivalent Grades for C276 Hastelloy Wire mesh

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C276 2.4819 N10276 NW 0276 ХН65МВУ NiMo16Cr15W ЭП760

Alloy C276 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

C276 Hastelloy Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Hastelloy C276 Wire Mesh
Hastelloy C276 Wire Mesh Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy C276 Wire Mesh, where an in – process anneal may be necessary with a high degree of cold working. Hastelloy C276 Hexagonal Wire Mesh should preferably be machined in the annealed condition, where a post weld heat treatment is not necessary.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5


 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy C22 Wire Mesh, which can be welded by all common methods and are highly versatile. Displaying excellent resistance to stress corrosion cracking and non – oxidizing acids, Hastelloy C22 Hexagonal Wire Mesh have been used for numerous applications. Hastelloy C22 Welding Wire Mesh is the most versatile of the Alloys and is widely used for chemical process equipment applications due to their excellent resistance to non – oxidizing environments.

Hastelloy C22 Wire Mesh Manufacturer In India| Hastelloy C22 Wire Mesh Manufacturer In Mumbai| Hastelloy C22 Wire Mesh Exporter In India | Hastelloy C22 Wire Mesh Exporter In Mumbai | Hastelloy C22 Wire Mesh Supplier In India | Hastelloy C22 Wire Mesh Supplier In Mumbai | Hastelloy C22 Wire Mesh Stockist In India | Hastelloy C22 Wire Mesh Stockist In Mumbai

Water – base coolant should be premium quality for Hastelloy C22 Netting Wire Mesh, sulfochlorinated water soluble oil or chemical emulsion with extreme pressure additives. Water – base coolant of Hastelloy C22 Woven Wire Mesh may cause chipping and rapid failure of carbide tools in interrupted cuts. Hastelloy C22 Spring Steel Wire Mesh is an alloy that is precipitation harden able for high mechanical properties. Alloy C22 Hexagonal Wire Mesh maintains good strength and oxidation resistance at temperatures up to about 1300 Degree F (700 Degree C).

Hastelloy C22 Wire Mesh
Hastelloy C22 Wire Mesh

The high strength and excellent fabrication characteristics of Alloy C22 Welding Wire Mesh make it useful for various components of aircraft and industrial gas turbines. Alloy C22 Netting Wire Mesh has good resistance to corrosion and oxidation along with high tensile and creep-rupture properties at temperatures to 1300 Degree C. Applications of Alloy C22 Woven Wire Mesh include blades, vanes, shafts, tail cones, afterburners, springs, and fasteners.

Hastelloy C22 Wire mesh Specifications

Specifications : ASTM / ASME B574 / SB574
Standard : ASTM, ASME
Size : 15NB to 150NB In
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.

Hastelloy C22 Wire Mesh Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
C22 0.010 max 0.50 max 0.08 max 0.02 max 2.50 max 50.015 min* 20.00 – 22.50 2.00 – 6.00 12.50 – 14.50 0.02 max

Alloy C22 Wire mesh Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C22 8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %

Equivalent Grades for C22 Hastelloy Wire mesh

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C22 2.4602 N06022 NW 6022 NiCr21Mo14W

Alloy C22 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

C22 Hastelloy Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Hastelloy C22 Wire Mesh
Hastelloy C22 Wire Mesh Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy C22 Wire Mesh, which can be welded by all common methods and are highly versatile. Displaying excellent resistance to stress corrosion cracking and non – oxidizing acids, Hastelloy C22 Hexagonal Wire Mesh have been used for numerous applications.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5


 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 825 Wire Mesh, which has good anti – oxidation and non – oxidizing heat acid performance. Incoloy 825 Hexagonal Wire Mesh is an Austenitic Nickel – Iron – Chromium Alloy Developed for Exceptional Corrosion Resistance in Both Oxidizing and Reducing Environments. Alloy 825 Welding Wire Mesh is used in chemical process equipment, acid production piping and vessels, pickling, etc.

Incoloy 825 Wire Mesh Manufacturer In India | Incoloy 825 Wire Mesh Manufacturer In Mumbai | Incoloy 825 Wire Mesh Exporter In India | Incoloy 825 Wire Mesh Exporter In Mumbai | Incoloy 825 Wire Mesh Supplier In India | Incoloy 825 Wire Mesh Supplier In Mumbai | Incoloy 825 Wire Mesh Stockist In India | Incoloy 825 Wire Mesh Stockist In Mumbai

Incoloy 825 Netting Wire Mesh is a nickel – iron – chromium alloy with titanium, molybdenum and copper, which has good mechanical properties from cryogenic temperatures to moderately high temperatures. Incoloy 825 Woven Wire Mesh has excellent resistance to both reducing and oxidizing acids, to stress – corrosion cracking, and to localized attack such as pitting and crevice corrosion. Incoloy 825 Spring Steel Wire Mesh has useful resistance to boiling sulfuric acid up to 40 % concentration, to 60 % concentration at 176 Degree F and in all concentrations to 150 Degree F.

Incoloy 825 Wire Mesh
Incoloy 825 Wire Mesh

Incoloy 825 Fencing Wire Mesh is even used as clad steel pipe – where resistance to stress cracking or general corrosion to a range of reducing or oxidizing acids is required. For long production runs if Alloy 825 Wires, the alloy tool steels, and high – speed steels give good results, especially if hard chromium plated to reduce galling. Alloy 825 Hexagonal Wire Mesh is also used in ammonium sulfate vessels, marine exhaust systems, expansion bellows, power station ash hoppers, etc.

Incoloy 825 Wire mesh Specifications

Specifications : ASTM / ASME B425 / SB425
Standard : ASTM / ASME
Size : 15NB to 150NB In
Length : UUPTO 1 METERS
Type : Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.

825 Incoloy Wire Mesh Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Al Ti
825 0.05 max 1.00 max 0.5 max 0.03 max 1.50 – 3.00 22.00 min 38.00 – 46.00 19.50 – 23.50 0.02 max 0.06 – 1.20

Alloy 825 Wire mesh Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

Equivalent Grades for 825 Incoloy Wire mesh

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo XH38BT

Alloy 825 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Incoloy 825 Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Incoloy 825 Wire Mesh
Incoloy 825 Wire Mesh Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 825 Wire Mesh, which has good anti – oxidation and non – oxidizing heat acid performance. Incoloy 825 Hexagonal Wire Mesh is an Austenitic Nickel – Iron – Chromium Alloy Developed for Exceptional Corrosion Resistance in Both Oxidizing and Reducing Environments.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5


 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 800 Wire Mesh for valued clienteles. This Incoloy 800 Wire Mesh is used for the similar creep resistant uses, but the mutual effects of thermal and mechanical processing of the alloy allow superior design pressures to be combined than are allowable for the conventional alloy. Incoloy 800H Hexagonal Wire Mesh is an iron – nickel – chromium alloy and is part of the 800 series family of alloy. This Incoloy 800HT Welding Wire Mesh is a mixture of chromium and nickel alloy and is organized composition imitative of INCOLOY alloy products.

Incoloy 800 Wire Mesh Manufacturer In India | Incoloy 800 Wire Mesh Manufacturer In Mumbai | Incoloy 800 Wire Mesh Exporter In India | Incoloy 800 Wire Mesh Exporter In Mumbai | Incoloy 800 Wire Mesh Supplier In India | Incoloy 800 Wire Mesh Supplier In Mumbai | Incoloy 800 Wire Mesh Stockist In India | Incoloy 800 Wire Mesh Stockist In Mumbai

Incoloy 800 Netting Wire Mesh has outstanding resistance to oxidation and tensile strength plus carburization characteristics. Meanwhile, this Incoloy 800H Woven Wire Mesh is also being offered in different sizes and shapes to our customers. Incoloy 800HT Spring Steel Wire Mesh offers superior corrosion resistance in oxidizing corrosive environments such as nitric acid or nitric acid – sulfuric acid. This Alloy 800 Fencing Wire Mesh has High temperature strength and High creep rupture strength.

Incoloy 800 Wire Mesh
Incoloy 800 Wire Mesh

We knew the importance of maintaining the aluminum and titanium contents in the upper portion of the specified material range of Alloy 800 Wire Mesh, which resulted in higher creep and stress rupture properties. Typical applications for these Alloy 800H Wires include ethylene pyrolysis, cracking furnaces for vinyl chloride, hydrocarbon cracking, diphenol and acetic acid.

Incoloy 800 / 800H / 800HT Wire mesh Specifications

Specifications : ASTM / ASME B 408 / SB 408
Standard : ASTM / ASME
Size : 15NB to 150NB In
Length : UUPTO 1 METERS
Type : Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.

800 / 800H / 800HT Incoloy Wire Mesh Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Al Ti
800 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60ᴬ 0.15 – 0.60ᴬ

Alloy 800 / 800H / 800HT Wire mesh Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
800 / 800H / 800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 800 / 800H / 800HT Incoloy Wire mesh

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21 XH32T

Alloy 800 / 800H / 800HT Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Incoloy 800 / 800H / 800HT Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Incoloy 800 Wire Mesh
Incoloy 800 Wire Mesh Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 800 Wire Mesh for valued clienteles. This Incoloy 800 Wire Mesh is used for the similar creep resistant uses, but the mutual effects of thermal and mechanical processing of the alloy allow superior design pressures to be combined than are allowable for the conventional alloy

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5


 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Inconel 718 Wire Mesh to the customers. This Inconel 718 Wires is an oxidation and corrosion resistant nickel alloy which is used both for its soaring potency and exceptional aqueous corrosion resistance. The power of Inconel 718 Wire Mesh is mainly a solid solution effect from columbium and molybdenum. This Inconel 718 Hexagonal Wire Mesh is a promising select for sea water uses, and so is extremely resistant in an extensive collection of mineral and organic acids.

Inconel 718 Wire Mesh Manufacturer In India | Inconel 718 Wire Mesh Manufacturer In Mumbai | Inconel 718 Wire Mesh Exporter In India| Inconel 718 Wire Mesh Exporter In Mumbai | Inconel 718 Wire Mesh Stockist In India | Inconel 718 Wire Mesh Stockist In Mumbai | Inconel 718 Wire Mesh Supplier In India | Inconel 718 Wire Mesh Supplier In Mumbai | Inconel 718 Wire Mesh

Alloy 718 Welding Wire Mesh (UNS N07718) resists an extensive collection of sternly corrosive atmospheres and is particularly resistant to crevice and pitting corrosion. Meanwhile, this Inconel 718 Netting Wire Mesh is also being offered in different sizes and shapes to our customers.

Inconel 718 Wire Mesh
Inconel 718 Wire Mesh

Alloy 718 Woven Wire Mesh achieves high-strength levels from the solid solution effects of Molybdenum and Niobium (Columbium) from room temperature up to 800 Degree C. For high temperature applications above 600 Degree C (1112 Degree F), this solution annealed Inconel 718 Spring Steel Wire Mesh is generally used. There is almost no attack in mild environments of Inconel 718 Fencing Wire Mesh such as fresh and sea water, alkaline media and neutral pH environment. This leads to the ability to recover creep properties of this Alloy 718 Wire Mesh to prolong the materials lifetime.

Inconel 718 Wire mesh Specifications

Specifications : ASTM / ASME B 637 / SB 637
Standard : ASTM / ASME
Size : 15NB to 150NB In
Length : UUPTO 1 METERS
Type : Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.

718 Inconel Wire Mesh Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Inconel 718 0.08 max 0.35 max 0.35 max 0.015max 0.30 max 50.00 – 55.00 17.00 – 21.00

Alloy 718 Wire mesh Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 718 8.2 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482 45 %

Equivalent Grades for 718 Inconel Wire mesh

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 718 2.4668 N07718

Alloy 718 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Inconel 718 Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Inconel 718 Wire Mesh
Inconel 718 Wire Mesh Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Inconel 718 Wire Mesh to the customers. This Inconel 718 Wires is an oxidation and corrosion resistant nickel alloy which is used both for its soaring potency and exceptional aqueous corrosion resistance.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Mumbai

Headquarters


D-2, Office no. 3, Gr. Floor, Bharat Nagar Society, Grant Road (E), Mumbai – 400007.
+91 9769056007

+91 22 66518863

[email protected][email protected]
LOCATIONS

We Are Everywhere


Inconel 718 Wire Mesh Manufacturer

OUR NETWORK india

MumbaiDelhiChennai


About Us

Sachiya Steel International

We are an ISO 9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.

We are an ISO TUV  9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.