LOGO 1200 X 300

Wire

Inconel Alloy 718 Wire Manufacturers In India

Inconel Alloy 718 Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Inconel Alloy 718 Wire which associates good creep and rupture strength with a high resistance to fatigue. Popular uses of this Inconel 718 Wire are high strength bolting, and down hole shafting. Hot – cold working of our Inconel 718 Wire in the range 1700 Degree F / 1850 Degree F (927 Degree C / 1010 Degree C) will improve the strength of the forging if the service temperature is below about 1100 Degree F (593 Degree C).

Inconel Alloy 718 Wire

Examples of this Inconel 718 Coil Wire are components for liquid fueled rockets, rings, casings and various formed sheet metal parts for aircraft and land – based gas turbine engines, and cryogenic tankage. Our Inconel 718 Welding Wire has good resistance to oxidation and corrosion at temperatures in the alloy’s useful strength range in atmospheres encountered in jet engines and gas turbine operations. This Inconel 718 Electrode has relatively good weldability, formability, and excellent cryogenic properties compared to other precipitation hardening nickel alloys.

Other popular nickel – chromium alloys like our Inconel 718 Wire are age hardened through the addition of aluminum and titanium. This Alloy 718 Wire has better mechanical properties at lower temperatures than Nimonic 90 Electrode & Inconel X – 750 Electrode. Our Alloy 718 Wire combines corrosion resistance and high strength with outstanding weldability including resistance to post – weld cracking.

Inconel 718 Wire Specifications
Specifications : ASTM B805 ASME SB805
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire

718 Inconel Wire Chemical Composition

Grade C Mn Si Cu S Cr Fe Ni N
Inconel 718  0.08 max 0.35 max 0.35 max  0.30 max  0.15 max  17.0-21.0  – 50.0-55.0 –

Inconel 718 Wire Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
 8.2 g/cm3  1350 °C (2460 °F)  Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482 45 %

Equivalent Grades for 718 Inconel Wire

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 718 2.4668 No7718 NCF 718  – – – –

Inconel 718 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

718 Inconel Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-24T16:12:31+05:30April 30th, 2022|

Inconel Alloy 625 Wire Manufacturers In India

Inconel Alloy 625 Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Inconel Alloy 625 Wire, where pitting and crevice corrosion are prevented by molybdenum. These elements also contribute to these Inconel 625 Wires’ outstanding corrosion resistance. Our Inconel 625 Wire is resistant to seawater, in both flowing and stagnant conditions, and under fouling. This Inconel 625 Coil Wire is resistant to pitting, impingement corrosion, crevice corrosion, inter – granular attack and is almost immune to chloride stress corrosion cracking.

Inconel Alloy 625 Wire

Our Inconel 625 Electrode is often used in Bubble caps, Heat shields, Valves, Piping, Tubing, Distillation columns, Combustion and chimney liners. This Inconel 625 Wire is also used in Marine Industries, Chemical Processing, Aerospace Industries, Pollution Control, and Nuclear Reactors. Our Inconel 625 Wire has good resistance to oxidation and scaling at high temperatures. This Alloy 625 Wire was designed as a solid solution strengthened material with no significant microstructure. High tensile, creep, and rupture strength; outstanding fatigue and thermal – fatigue strength; oxidation resistance; and excellent weldability and gradeability are the properties of our Alloy 625 Coil Wire that make it interesting to the aerospace field.

This Alloy 625 Wire has high creep – rupture strength, non – magnetic, and oxidation resistant to 1800 Degree F. Niobium stabilizes Alloy 625 Electrode against sensitization during welding. This Alloy 625 Wire has almost complete freedom from chloride induced stress corrosion cracking.

Inconel Alloy 625 Wire Specifications
Specifications : ASTM B166 ASME SB166
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire

625 Inconel Wire Chemical Composition

Grade C Mn Si Cu S Cr Fe Ni N
Inconel 625  0.10 max 0.50 max 0.50 max – 0.15 min 20.0–23.0 5.0 max 58.0 min –

Inconel 625 Wire Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.4 g/cm3 1.350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 517 42.5 %

Equivalent Grades for 625 Inconel Wire

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 625 2.4856 N06625 NCF 625 NA 21 ХН75МБТЮ NC22DNB4M NiCr22Mo9Nb

Inconel 625 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

625 Inconel Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-25T12:13:09+05:30April 30th, 2022|

Inconel 601 Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Inconel 601 Wire, which develops a tightly adherent oxide scale which resists spalling even under severe thermal cycling. Other applications of our Inconel 601 Wires include thermocouple protection tubes, condenser tubes, process heaters, and so on. This Inconel 601 Wire is best forged, for large deformations, between 2250 Degree F and 1900 Degree F, but forging may be continued to 1650 Degree F. Due to high chromium and some aluminum content in our Inconel 601 Coil Wire, good resistance in oxidizing sulfur bearing atmospheres at elevated temperatures is demonstrated.

Inconel 601 Wire

This Inconel 601 Electrode is often used in Chemical Processing, Heat treating industry, Aerospace, Power generation and so on. Our Inconel 601 Wire is a standard material of construction for various types of thermal – processing equipment. This Inconel 601 Wire has good creep rupture strength, along with readily joined by conventional welding products and processes.

Our Alloy 601 Wire can be machined using conventional machining methods which are used for iron – based alloys. This Alloy 601 Coil Wire is not suggested for use in strongly reducing and sulfur bearing environments. Our Alloy 601 Wire is a Nickel – Chromium alloy with an addition of Aluminum for outstanding resistance to oxidation and other forms of high temperature corrosion. This Alloy 601 Wire also has high mechanical properties at elevated temperatures.

Inconel 601 Wire Specifications
Specifications : ASTM B166 ASME SB166
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire

601 Inconel Wire Chemical Composition

Grade C Mn Si Cu S Cr Fe Ni N
Inconel 601  0.10 max 1.00 max 0.50 max  1.00 max 0.015max 21.00 – 25.00 bal  58.0-63.0  –

Inconel 601 Wire Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.1 g/cm3 1411 °C (2571 °F)  Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 601 Inconel Wire

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe

Inconel 601 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

601 Inconel Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-02T11:19:57+05:30April 29th, 2022|Wire|

Inconel Alloy 600 Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Inconel Alloy 600 Wire, which are normally preferred for handling concentrated and high temperature caustic. Its high nickel content, a minimum of Ni 72 %, combined with its chromium content, provides users of Inconel 600 Wire a number of benefits. In strong oxidizing solutions like hot, concentrated nitric acid, Inconel 600 Coil Wire has poor resistance. The high chromium content of Inconel 600 Wire raises its oxidation resistance considerably above that of pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.

Inconel Alloy 600 Wire

Inconel 600 Wire can both hot formed and cold form using typical processes, and is also often used in vegetable and fatty acid vessels. Inconel 600 Wire is also used for furnace components, in food and chemical processing, nuclear engineering, and sparking electrodes. Chromium content in Alloy 600 Coiled Wire confers resistance to sulfur compounds and also provides resistance to oxidizing conditions at high temperatures or in corrosive solutions.

The high nickel content in Alloy 600 Coil Wire enables it to retain considerable resistance under reducing conditions. Alloy 600 Wire is a nickel – chromium alloy with good oxidation resistance at high temperatures and resistance to chloride – ion stress – corrosion cracking, corrosion by high – purity water, and caustic corrosion. Alloy 600 Wire has exceptional Temperature Resistance and Corrosion Resistance as its excellent properties.

Inconel 600 Wire Specifications
Specifications : ASTM B166 ASME SB166
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire

600 Inconel Wire Chemical Composition

Grade C Mn Si Cu S Cr Fe Ni N
Inconel 600  0.15 max 1.00 max 0.50 max  0.50 max 0.015max 14.00 – 17.00 6.00 – 10.00  72.00 min  –

Inconel 600 Wire Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 600 8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %

Equivalent Grades for 600 Inconel Wire

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 600 2.4816 N06600 NCF 600 NA 13 МНЖМц 28-2,5-1,5 NC15FE11M NiCr15Fe

Inconel 600 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

600 Inconel Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-02T11:24:31+05:30April 29th, 2022|Wire|

AISI 4130 Wire Manufacturers In India

AISI 4130 Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality AISI 4130 Wire, which has some excellent features to offer such as rust free, easy fitments, perfect finish, and more. The addition of copper to this AISI 4130 Wire gives it corrosion resistant properties superior to the conventional chrome nickel stainless steels, in particular to sulphuric, phosphoric and acetic acids. Low carbon content of AISI 4130 Coil Wire improves cleanliness and weld strength.

AISI 4130 Wire

This AISI 4130 Welding Wire is added with copper to improve its resistance to strong reducing acids, such as sulphuric acid. AISI 4130 Electrode Wire is a high alloyed austenitic stainless steel with very good corrosion resistance. Meanwhile, this AISI 4130 Wire is also being offered in different sizes and shapes to our customers. AISI 4130 Steel Filler Wire is commonly used in table cutlery, jewellery, watch bands, surgical instruments, as well as in the aviation industry.

This AISI 4130 Steel Coil Wire shall conform to chemical composition, tensile property, and hardness requirements. Subdivisions for most steels in this family, such as in AISI 4130 Steel Welding Wire, include “through – harden able” and “carburizing” grades (plus several specialty grades such as nitriding steels). Through – hardening grades such as this AISI 4130 Steel Electrode — which are heat treated by quenching and tempering — are used when maximum hardness and strength must extend deep within a part.

AISI 4130 Wire Specifications
Dimensions : ASTM, ASME
Length : MAX 12000 mm
Diameter : 5.5 mm To 400 mm
Specialize : Wire, Filler Wire, Coil Wire, Electrode, Welding Electrode, Welding Wire

4130 AISI Wire Chemical Composition

Grade C Mn Si P S Fe Mo Ni Cr
AISI 4130  0.28-0.33  0.40-0.60  0.15-0.35 0.035 max 0.025 MAX  97.3-98.22  0.15-0.25 0.50 max 0.80-1.10

AISI 4130 Wire Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
 7.85 g/cm3  1432 ℃  560 460 21.50%

Equivalent Grades for 4130 AISI Wire

STANDARD WERKSTOFF NR. UNS JIS BS EN
AISI 4130 1.7218 G41300 JIS G4105 BS 970 25CrMo4

AISI 4130 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

4130 AISI Alloy Steel Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-03T13:32:39+05:30April 28th, 2022|

SMO 254 Wire Manufacturers In India

SMO 254 Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality SMO 254 Wire, where the allowable design values are about 50 % higher than those for standard austenitic steels. Due to high levels of chromium, molybdenum, and nitrogen, our SMO 254 Wire is especially suited for high chloride environments such as brackish water, seawater, pulp mill bleach plants, and other high – chloride process streams. This means that the possibility of designing thinner walls in this SMO 254 Wire can save costs in material, transport and maintenance.

SMO 254 Wire

The assemblies were tested under laboratory conditions to observe the fatigue endurance of our SMO 254 Coil Wire, when installed at various levels of applied alternating bending stress of the tube. This method applies a completely reversed bending stress on the fitting connection of this SMO 254 Electrode while pressurized with hydraulic oil at the tubing working pressure.

The test samples of our SMO 254 Wire were flexed until either the fitting leaked, the tube fractured, or at least 10 million cycles were achieved, whichever occurred first. The strain level calculates to an alternating stress for this Alloy 254 Wire, where Rotary flexure testing procedures have been derived. Our Alloy 254 also reports that measured field data for piping systems suggest that if the system lasts beyond 10 million cycles, it will have infinite life.

SMO 254 Wire Specifications
Specifications : ASTM A580 ASME SA580 / ASTM A313 ASME SA313
Dimensions : ASTM, ASME
Length : MAX 12000 mm
Diameter : 5.5 To 400 mm
Specialize : Wire, Filler Wire, Coil Wire, Electrode, Welding Electrode, Welding Wire

254 SMO Wire Chemical Composition

Grade C Mn Si Cu S P Mo Ni Cr
SMO 254 0.02 1  0.08 0.5-1.0 0.01  0.03 6.0-6.5  17.5-18.5 19.5-20.5

SMO 254 Filler Wire Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8 g/cm3 1320-1390 ℃ 650 300 35 %

Equivalent Grades for 254 SMO Wire

STANDARD WERKSTOFF NR. UNS SIS BS GOST AFNOR EN
SMO 254 1.4547  S31254  2378  – – Z1 CNDU 20.18.06Az X1CrNiMoCuN20-18-7

SMO 254 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

254 SMO Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-10T18:23:04+05:30April 28th, 2022|

Stainless Steel 410 Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 410 Wire, where the level of carbon in it is deliberately increased to obtain high strength and hardness. The austenitic microstructure of Stainless Steel 410 Wire provides high toughness, from elevated temperatures to far below freezing, making these steels particularly suited to cryogenic applications. The many unique values provided by Stainless Steel 410 Coil Wire make it a powerful candidate in materials selection.

Stainless Steel 410 Wire

Engineers, specifies and designers often underestimate or overlook these values provided by Stainless Steel 410 Wire because of what is viewed as the higher initial cost of stainless steel. However, over the total life of a project, Stainless Steel 410 Wire is often the best value option. Lower alloyed grades resist corrosion in atmospheric and pure water environments in Stainless Steel 410 Wire, while high – alloyed grades can resist corrosion in most acids, alkaline solutions, and chlorine bearing environments, properties which are utilized in process plants.

The easy cleaning ability of 410 Stainless Steel Wire makes it the first choice for strict hygiene conditions, such as hospitals, kitchens, abattoirs and other food processing plants. The work – hardening property of 410 Stainless Steel Wire, that results in a significant strengthening of the material from cold – working alone, and the high strength allow reduced material thickness over conventional grades, therefore cost savings.

SS 410 Wire Specifications
Specifications : ASTM A580 ASME SA580 / ASTM A313 ASME SA313
Dimensions : ASTM, ASME
Length : MAX 12000 mm
Diameter : 5.5 mm To 400 mm
Specialize : Wire, Coil Wire

410 Stainless Steel Wire Chemical Composition

Grade C Mn Si P S Cr MO Ni N
410 min. – – – – – 11.5 – – –
max. 0.15 1.0 1.0 0.040 0.030 13.5 0.75 –

Stainless Steel 410 Wire Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
410 480 275 16 92 201

Equivalent Grades for 410 Stainless Steel Wire

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
410 S41000 410S21 56A 1.4006 X12Cr13 2302 SUS 410

SS 410 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

410 Steel Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-25T15:41:57+05:30April 27th, 2022|

Alloy 20 Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Alloy 20 Wire, which is the standard term referring to steels with other alloying elements added deliberately in addition to the carbon. This Alloy 20 Wire is often subdivided into two groups: high alloy steels and low alloy steels, where the difference between the two is defined somewhat arbitrarily. The most agree that any steel that is alloyed with more than eight percent of its weight being other elements beside iron and carbon, is our Alloy 20 Wire.

Alloy 20 Wire

Common alloyants in this Alloy 20 Coil Wire include manganese (the most common one), nickel, chromium, molybdenum, vanadium, silicon, and boron. These metals in our Alloy 20 are added to produce specific properties that are not found in regular carbon steel. The elements are added in varying proportions (or combinations) making Alloy 20 Welding Electrode take on different aspects such as increased hardness, increased corrosion resistance, increased strength, improved formability (ductility); the weldability can also change.

Alloying elements in our Carpenter 20 Wire are added to change mechanical or physical properties. Carpenter 20 Filler Wire is considered to be an alloy when the maximum of the range given for the content of alloying elements exceeds one or more limits. Our Carpenter 20 Electrode is often specified when high strength is needed in moderate – to – large sections.

Alloy 20 Wire Specifications
Specifications : ASTM B473 ASME SB473
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire, Electrode Wire, Welding Wire.

Alloy 20 Wire Chemical Composition

Alloy 20 Ni C Mo Mn Si Fe Cu S P Cr
32 – 38 0.02 max 2 – 3 1 – 2 0.7 max Bal 3 – 4 0.005 max 0.02 max 19 – 21

Alloy 20 Wire Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.1 g/cm3 1443 °C (2430 °F) Psi – 35000 , MPa – 241 Psi – 80000 , MPa – 551 30 %

Equivalent Grades for Alloy 20 Wire

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Alloy 20 N08020 2.4660 Z2NCUD31-20AZ NiCr20CuMo – – –

Alloy 20 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 20 Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-05T17:35:51+05:30April 27th, 2022|

Stainless Steel 347 Wire Manufacturers In India

Stainless Steel 347 Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality High Stainless Steel 347 Wire, which is subject to stress corrosion cracking but more resistant than other alloys. These Stainless Steel 347 Wires has good resistance to thermal fatigue and cyclic heating and is widely used where Sulphur dioxide gas is encountered at elevated temperatures. Continuous use of our Stainless Steel 347H Wires in 425 Degree C – 860 Degree C range not recommended due to carbide precipitation, if subsequent aqueous corrosion resistance is needed, but it often performs well in temperatures fluctuating above and below this range.

Stainless Steel 347 Wire

These Stainless Steel 347 Wires is prone to sigma phase embrittlement in the temperature range 650 Degree C – 900 Degree C. Our Stainless Steel 347H is generally used at temperatures starting from about 800 Degree C or 900 Degree C – above the temperatures at which they are effective.

These Stainless Steel 347 Coil Wires is often used in Furnace parts, Oil burner parts, Carburizing boxes, Heat Treatment baskets and jigs, Heat exchangers, wire. Sachiya Steel International is one of India’s leading manufacturers of high quality of our 347 Stainless Steel Wires which find application across diverse sectors. These 347H Stainless Steel Wires are also fabricated and machined to meet up the piping needs of our esteemed clients.

SS 347/347H Wire Specifications
Specifications : ASTM A580 ASME SA580 / ASTM A313 ASME SA313
Dimensions : ASTM, ASME
Length : Max 12000 mm
Diameter : 5.5 To 500 mm
Specialize : Wire, Coil Wire

347/347H Stainless Steel Wire Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
347 min. – – – – 17.0 – 9.0 –
max. 0.08 2.0 1.0 0.040 0.030 20.0 13.0 –
347H min. 0.04 – – – – 17.0 – 9.0 –
max. 0.10 2.0 1.0 0.045 0.030 19.0 13.0 –

Stainless Steel 347/347H Wire Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
347 515 205 40 92 201
347H 515 205 35 92 201

Equivalent Grades for 347/347H Stainless Steel Wire

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
347 S31703 – X6CrNiNb18-10 1.4550 – – SUS 347
347H S34709 – X6CrNiNb18-12 1.4961 – – SUS 347H

SS 347/347H Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

347/347H Steel Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-27T12:46:32+05:30April 26th, 2022|

Stainless Steel En-318 Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel En-318 Wire , which provides better mechanical properties or greater resistance to corrosion than carbon steel. Stainless Steel En-318 Wire varies from other steels in that they are not made to meet a specific chemical composition but rather to specific mechanical properties. Stainless Steel En-318 Wire have carbon content between 0.05 % – 0.25 % to retain formability and weldability.

Stainless Steel En-318 Wire

Other alloying elements in Stainless Steel En-318 Wire include up to 2.0 % manganese and small quantities of copper, nickel, niobium, nitrogen, vanadium, chromium, molybdenum, titanium, calcium, rare earth elements, or zirconium. These elements are intended to alter the microstructure of Stainless Steel En-318 Coil Wire, which is usually a ferrite – pearlite aggregate, to produce a very fine dispersion of alloy carbides in an almost pure ferrite matrix.

This eliminates the toughness – reducing effect of a pearlitic volume fraction yet maintains and increases the strength of Stainless Steel En-318 Wire by refining the grain size, which in the case of ferrite increases yields strength by 50 % for every halving of the mean grain diameter. Because of their higher strength and toughness, Stainless Steel En-318 Wire usually requires 25 % to 30 % more power to form, as compared to carbon steels. Meanwhile, precipitation strengthening plays a minor role too in this En-318 Stainless Steel Wire.

SS En-318 Wire Specifications
Specifications : ASTM A580 ASME SA580 / ASTM A313 ASME SA313
Dimensions : ASTM, ASME
Length : MAX 12000 mm
Diameter : 5.5 mm To 400 mm
Specialize : Wire, Coil Wire

En-318 Stainless Steel Wire Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS En-318 0.030 2.00 1.00 0.035 0.015 21.0-23.0 2.50-3.50 4.50-6.50 0.10-.022

Stainless Steel En-318 Wire Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
En-318 650-880 450 25 – –

Equivalent Grades for En-318 Stainless Steel Wire

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
En-318 S31803 X2CrNiMoN22-5-3 1.4462 – 2205 –

SS En-318 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

En-318 Steel Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-21T11:46:52+05:30April 26th, 2022|
LOGO 1200 X 300

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top