SMO 254 Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality SMO 254 Wire, where the allowable design values are about 50 % higher than those for standard austenitic steels. Due to high levels of chromium, molybdenum, and nitrogen, our SMO 254 Wire is especially suited for high chloride environments such as brackish water, seawater, pulp mill bleach plants, and other high – chloride process streams. This means that the possibility of designing thinner walls in this SMO 254 Wire can save costs in material, transport and maintenance.

SMO 254 Wire

The assemblies were tested under laboratory conditions to observe the fatigue endurance of our SMO 254 Coil Wire, when installed at various levels of applied alternating bending stress of the tube. This method applies a completely reversed bending stress on the fitting connection of this SMO 254 Electrode while pressurized with hydraulic oil at the tubing working pressure.

The test samples of our SMO 254 Wire were flexed until either the fitting leaked, the tube fractured, or at least 10 million cycles were achieved, whichever occurred first. The strain level calculates to an alternating stress for this Alloy 254 Wire, where Rotary flexure testing procedures have been derived. Our Alloy 254 also reports that measured field data for piping systems suggest that if the system lasts beyond 10 million cycles, it will have infinite life.

SMO 254 Wire Specifications

Specifications : ASTM A580 ASME SA580 / ASTM A313 ASME SA313
Dimensions : ASTM, ASME
Length : MAX 12000 mm
Diameter : 5.5 To 400 mm
Specialize : Wire, Filler Wire, Coil Wire, Electrode, Welding Electrode, Welding Wire

254 SMO Wire Chemical Composition

Grade C Mn Si Cu S P Mo Ni Cr
SMO 254 0.02 1  0.08 0.5-1.0 0.01  0.03 6.0-6.5  17.5-18.5 19.5-20.5

SMO 254 Filler Wire Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8 g/cm3 1320-1390 ℃ 650 300 35 %

Equivalent Grades for 254 SMO Wire

STANDARD WERKSTOFF NR. UNS SIS BS GOST AFNOR EN
SMO 254 1.4547  S31254  2378  – Z1 CNDU 20.18.06Az X1CrNiMoCuN20-18-7

SMO 254 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

254 SMO Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

SMO 254 Wire
SMO 254 Wire Manufacturer

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality SMO 254 Wire, where the allowable design values are about 50 % higher than those for standard austenitic steels. Due to high levels of chromium, molybdenum, and nitrogen, our SMO 254 Wire is especially suited for high chloride environments such as brackish water, seawater, pulp mill bleach plants, and other high – chloride process streams. This means that the possibility of designing thinner walls in this SMO 254 Wire can save costs in material, transport and maintenance.

Product Brand: Sachiya Steel International

Product Currency: INR

Product Price: 250

Product In-Stock: InStock

Editor's Rating:
5