Wire

Monel Alloy 400 Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Wire , which is in fact used most commonly in high temperature brazing applications. Our Monel 400 Wire is generally being used when specifications call for corrosion resistance and high – temperature service properties. This Monel 400 Coil Wire can also be used in sub – zero applications as low as the temperature of liquid oxygen, helium, or nitrogen. Nickel brazing alloys have low vapour pressure, making our Monel 400 Welding Wire suited to vacuum systems and vacuum tube applications.

Monel Alloy 400 Wire

With their joint strength and resistance to corrosion, this nickel brazing Monel 400 Electrode is ideal for jet engine parts and assemblies, food handling equipment, nuclear energy and carbide tools. Our Monel 400 Welding can only be hardened by further rolling, while showing excellent corrosion resistance, which is higher than that of pure nickel in reduced environments and better than that of copper in oxidizing environments.

This Alloy 400 Electrode is a solid solution alloy that can be hardened by the process of cold working. Our Alloy 400 Filler Wire is also known as super alloy, where series of nickel – copper alloys are grouped. The proportions of copper and nickel used to make this Alloy 400 Welding Wire are the same as that found in the nickel ore found in Ontario mines.

Monel 400 Wire Specifications

Specifications : ASTM B164 ASME SB164
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire, Electrode Wire, Welding Wire.

400 Monel Wire Chemical Composition

Grade C Mn Si Cu S Cr Fe Ni N
Monel 400  0.30 max 2.00 max  0.50 max 28.0-34.0 0.24max  – 2.50 max 63.00 min  –

Monel 400 Wire Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400  8.8 g/cm3  1350 °C (2460 °F)  Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40%

Equivalent Grades for 400 Monel Wire

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Monel 400 2.4360 N04400 NCF 400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe

Monel 400 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

400 Monel Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-02T11:11:41+05:30May 6th, 2022|Wire|

Hastelloy X Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy X Wire which is known for its excellent high temperature strength withstanding up to 2200 Degree F. Hastelloy X Wire can also be easily fabricated with forming and welding characteristics by both manual and automatic methods. Our Hastelloy X Coil Wire offers exceptional performance in furnace rolls or other industrial furnace applications because of the alloy’s strong resistance to oxidizing, reducing and neutral atmospheres. In addition, Hastelloy X Wire is widely used for a variety of chemical processing parts, including retorts, pyrolysis tubing, and muffles due to its exceptional resistance to stress – corrosion cracking.

Hastelloy X Wire

Our Hastelloy X wire is normally supplied in the solution – treated condition, following a treatment at 2150 Degree F (1175 Degree C) and rapid cooling. Bright annealed parts of Hastelloy X Wire are cooled in hydrogen, where high – speed steel or cast – alloy tools are recommended. The machinability rating of our Alloy X Coil Wire is 27 %, where slow speeds, positive feeds and rigid equipment are the order of the day.

Alloy X Wire has low hardness, good ductility and good weldability, making the metal easy to fabricate. Our Alloy X Wire has a low work – hardening rate, but it may be cold worked to moderately high strength levels while maintaining ductility.

Hastelloy X Wire Specifications

Specifications : AMs 5754 AMS 5798
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire

X Hastelloy Wire Chemical Composition

Grade C Mn Si Co P Fe Mo Ni Cr S
Hastelloy X 0.05 – 0.15 1.00 max 1.00 max 0.50 – 2.50 0.04 max 17.00 – 20.00 8.00 – 10.00 Balance 20.50 – 23.00 0.03 max

Hastelloy X Wire Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.22 g/cm3 1355 °C   MPa – 665  MPa – 240 35 %

Equivalent Grades for X Hastelloy Wire

STANDARD WERKSTOFF NR. UNS JIS EN
Hastelloy X 2.4665 N06002

Hastelloy X Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

X Hastelloy Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-02T11:14:34+05:30May 6th, 2022|Wire|

Hastelloy B3 Wire Manufacturers In India

Hastelloy B3 Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy B3 Wire which can be hot forged, hot rolled, hot upset, hot extruded, and hot formed. Hastelloy B3 Wire exhibits high resistance to chloride – induced pitting and crevice attack, and forms of corrosion to which the austenitic stainless steels are particularly prone. To assess the resistance of alloys to pitting and crevice attack, Hastelloy B3 Coil Wire is customary to measure their Critical Pitting Temperatures and Critical Crevice Temperatures in acidified ferric chloride, in accordance with the procedures defined in ASTM Standard.

Hastelloy B3 Wire represents the lowest temperatures at which pitting and crevice attack is encountered in this solution, within 72 hours. Wrought products of our Hastelloy B3 Wire are supplied in the Mill Annealed (MA) condition, unless otherwise specified. This solution annealing procedure in Hastelloy B3 Wire has been designed to optimize the alloy’s corrosion resistance and ductility.

Hastelloy B3 Wire

 

Following all hot forming operations, our Alloy B3 Coil Wire should be re – annealed, to restore optimum properties. Alloy B3 Wire should also be re – annealed after any cold forming operations that result in an outer fiber elongation of 7 % or more. However, our Alloy B3 Coil Wire is more sensitive to strain and strain rates than the austenitic stainless steels, and the hot working temperature range is quite narrow.

Hastelloy B3 Wire Specifications

Specifications : ASTM B335 ASME SB335
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire

B3 Hastelloy Wire Chemical Composition

Grade C Mn Si Fe S Cr Mo Ni Ti
Hastelloy B3 0.01 max 3.0 max 0.10 max 15 0.03 max 1.5max 28.5 65.0 min 0.2 max

Hastelloy B3 Wire Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy B3

Equivalent Grades for B3 Hastelloy Wire

STANDARD WERKSTOFF NR. UNS
Hastelloy B3 2.4600 N10675

Hastelloy B3 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

B3 Hastelloy Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-16T13:23:42+05:30May 5th, 2022|

Hastelloy B2 Wire Manufacturers In India

Hastelloy B2 Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy B2 Wire which has excellent stress corrosion cracking resistance with very good resistance to localized attack. Hastelloy B2 Wire can be easily forged in the temperature range of 1232 Degree C – 982 Degree C (2250 Degree F – 1800 Degree F). Stringent chemistry control for Hastelloy B2 Wire along with years of development has resulted in the alloy used today. The Corrosion – Resistant of Hastelloy B2 Coil Wire are widely used by the chemical processing industries.

The need for reliable performance in Hastelloy B2 Wire leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries. The attributes of Hastelloy B2 Wire include high resistance to uniform attack, outstanding localized corrosion resistance, excellent stress corrosion cracking resistance, and ease of welding and fabrication.

Hastelloy B2 Wire

Alloy B2 Wire possesses outstanding resistance to non – oxidizing acids, such as hydrochloric acid and sulphuric acid. The advantages of Alloy B2 Coil Wire over previous B-family alloys are enhanced thermal stability and improved fabrication characteristics. Alloy B2 Wire has very good resistance to reducing, and mildly oxidizing corrosives, which is particularly resistant to pitting and crevice corrosion. As always, special care must be taken in selecting our Alloy B2 Welding Electrode for the desired application.

Hastelloy B2 Wire Specifications

Specifications : ASTM B335 ASME SB335
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire

B2 Hastelloy Wire Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
Hastelloy B2 0.02 0.01 0.01  0.04  0.03 1.0  26 – 30 Bal

Hastelloy B2 Wire Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy B2 9.2g/cm3  1370 °C (2550 °F) Psi – 1,15,000 , MPa -760 Psi – 52,000 , MPa – 350 40 %

Equivalent Grades for B2 Hastelloy Wire

STANDARD WERKSTOFF NR. UNS
Hastelloy B2 2.4617 N10665

Hastelloy B2 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

B2 Hastelloy Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-18T14:36:49+05:30May 5th, 2022|

Hastelloy C276 Wire Manufacturers In India

Hastelloy C276 Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy C276 Wire which is considered moderate – to – difficult to machine, but can be machined using conventional methods. Our Hastelloy C276 Wire offer faster machining speeds, longer tool life, improved part quality, and lower total cost of machined parts. This Hastelloy C276 Coil Wire is non – magnetic in the annealed condition but may possibly become slightly magnetic as a result of cold working or welding. Our Hastelloy C276 Wire is versatile, general purpose stainless steels with good resistance to atmospheric corrosion, to a lot of organic and inorganic chemicals, and to foods and beverages.

Hastelloy C276 Wire

This Hastelloy C276 Coil Wire has as well been used in vacuum processing equipment and specialized instruments where high integrity is essential. Our Hastelloy C276 Electrode offer faster machining speeds, longer tool life, improved part quality, and lower total cost of machined parts.

This Alloy C276 Filler Wire is forged between 2250 Degree F / 1750 Degree F (1230 Degree C / 955 Degree C) following a soak at forging temperature of 30 minutes per inch of billet or ingot section thickness. Forging of our Alloy C276 Wire should be started immediately when the stock is removed from the reheat furnace and 25 % / 40 % reductions help to retain as much internal heat as possible.

Hastelloy C276 Wire Specifications

Specifications : ASTM B574 ASME SB574
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire

C276 Hastelloy Wire Chemical Composition

Hastelloy C276 Ni C Mo Mn Si Fe P S Co Cr
Balance 0.010 max 15.00 – 17.00 1.00 max 0.08 max 4.00 – 7.00 0.04 max 0.03 max 2.5 max 14.50 – 16.50

Hastelloy C276 Wire Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.89 g/cm3 1370 °C (2500 °F) Psi – 52,000 , MPa – 355 Psi – 1,15,000 , MPa – 790 40 %

Equivalent Grades for C276 Hastelloy Wire

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Hastelloy C276 N10276 2.4819 NiMo16Cr15W NW 0276 ХН65МВУ

Hastelloy C276 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

C276 Hastelloy Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-13T12:28:45+05:30May 4th, 2022|

Hastelloy C22 Wire Manufacturer In India

Hastelloy C22 Wire Manufacturer In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy C22 Wire which is selected over different alloys for the clamshell bellows after extensive testing. Analysis of corrosion resistance of the tested material can also be performed in Hastelloy C22 Wire and the results provided to the customer as a free technical service. Hastelloy C22 Wire is tested for this hydrofluoric acid pre – scrubber after the original material failed. Sleeved electro – galvanizing finishing rolls made of Hastelloy C22 Coil Wire are ready for placement in a steel finishing manufacturing line.

Conditions were so severe in C-stage bleaching operations at one mill that even Hastelloy C22 Electrode welds were suspect. As a preventive maintenance measure, three millimeters was ground off each weld and replaced with a weld deposit of Hastelloy C22 Electrode. These Alloy C22 Coil Wire helps reduce defects on the rolls which is necessary to produce defect free galvanized steel for the automotive industry.

Hastelloy C22 Wire

Alloy C22 Wire had four times better corrosion resistance than the original material and 20 percent better than the other alloys at 150 Degree F to 200 Degree F. Solid rocket propellant effluents and salt air in Alloy C22 Wire causes pitting and crevice corrosion attack of stainless steel. Alloy C22 Wire has a more restricted composition for improved performance, where these improvements are of such significance that it has been widely patented throughout the world.

Hastelloy C22 Wire Specifications

Specifications : ASTM B574 ASME SB574
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire

C22 Hastelloy Wire Chemical Composition

Grade C Mn Si P S Cr Mo Fe Co Ni V W
Hastelloy C22 0.010 max 0.50 max 0.08 max 0.02 max 0.02 max 20.0-22.5 12.5 – 14.5 2 – 6 2.5 max bal 0.35 max 2.5-3.5

Hastelloy C22 Wire Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C22 8.69g/cm3 1399 °C (2550°F) Psi – 1,00,000 ,MPa-690 Psi – 45000 , MPa – 310 45%

Equivalent Grades for C22 Hastelloy Wire

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Hastelloy C22 2.4602 N06022 NW 6022 NiCr21Mo14W

Hastelloy C22 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

C22 Hastelloy Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-15T18:38:18+05:30May 4th, 2022|

Incoloy Alloy 825 Wire Manufacturers In India

Incoloy Alloy 825 Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Incoloy Alloy 825 Wire, where annealing is done at 1750 Degree F (954 Degree C) with rapid air cool. The resistant to pitting and crevice corrosion of Incoloy 825 Wire and with appropriate heat treating, it is stable against the sensitization to inter – granular corrosion. Incoloy 825 Coil Wire has good mechanical properties at both room and elevated temperatures up to approximately 1000 Degree F. Incoloy 825 Wire offers exceptional resistance to corrosion by sulfuric and phosphoric acids and is often the most cost effective alloy in sulfuric acid service.

Incoloy Alloy 825 Wire

Incoloy 825 Wire is often used in Radioactive waste handling, Nuclear fuel reprocessing, Marine exhaust systems, Pickling tank heaters, tanks, and equipment. Incoloy 825 Wire has good weldability by all conventional processes, and is developed to provide exceptional corrosion resistance in both oxidizing and reducing environments. Alloy 825 Filler Wire, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing environments such as those containing sulfuric and phosphoric acids.

Typical applications of Alloy 825 Coil Wire are: phosphoric acid evaporators; pickling – tank heater, pickling hooks and equipment; etc. Alloy 825 Wire is also used in chemical processing, acid production, oil and gas well piping, propeller shafts, and more. Alloy 825 Wire is characterized by good resistance to chloride – induced pitting and crevice corrosion.

Incoloy Alloy 825 Wire Specifications

Specifications : AMS 5542 / ASTM B425 ASME SB425
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire

825 Incoloy Alloy Wire Chemical Composition

Grade C Mn Si S Al Fe Ni Cr Cu Ti
825 0.05 max 1.00 max 0.05 max 0.03 max 0.02 max 22.0 min 38.0-46.0 19.50-23.50 1.50-3.00 0.06 – 1.20

Incoloy 825 Filler Wire Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

Equivalent Grades for 825 Incoloy Wire

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo XH38BT

Incoloy 825 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

825 Incoloy Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-08T16:54:02+05:30May 3rd, 2022|

Incoloy Alloy 330 Wire Manufacturers In India

Incoloy Alloy 330 Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High  Quality Incoloy Alloy 330 Wire to the clients, which is a patented alloy designed specifically for the heat treat industry. This Incoloy 330 Wire is an austenitic nickel – iron – chromium alloy developed to provide excellent resistance to carburizing and oxidizing atmospheres at elevated temperatures. Our SS 330 Wire combines excellent resistance to carburization and oxidation at temperatures up to 2200 Degree F (1200 Degree C) with high strength.

Incoloy Alloy 330 Wire

Many factors go into the selection of this Ra 330 Coil Wire, including availability, versatility to function and resistance to a range of oxidizing and reducing atmospheres common in heat treating. Our Incoloy 330 Wire is a unique combination of various different metal which combine to form one sturdy alloy out of which sheets are manufactured. The excellent weldability of this SS 330 Electrode and its ability is to be joined very successfully to other alloys by means of different compositions.

The high nickel and chromium of our Ra 330 Welding Electrode provide good resistance to oxidation and carburization. We can also appoint official certified Inspection Agencies upon request of our clients so that they can witness the material reports, dimensions and quality conformity of our Alloy 330 Wire. For small requirements we can dispatch this Alloy 330 Electrode immediately against the purchase order.

Incoloy Alloy 330 Wire Specifications

Specifications : AMS 5716
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire

330/SS330/Ra330 Incoloy Wire Chemical Composition

Grade C Mn Si Cu S Cr Fe Ni Sn Pb
Incoloy 330  0.08 max 2.00 max 0.75-1.50 1.00 max  0.03 max 17.0-20.0 balance 34.0-37.0 0.025 0.05 max

Equivalent Grades for 330/SS330/Ra330 Incoloy Wire

STANDARD WERKSTOFF NR. UNS
Incoloy 330 1.4886 N08330

Incoloy 330/SS330/Ra330 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

330/SS330/Ra330 Incoloy Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-08T17:51:42+05:30May 3rd, 2022|

Incoloy Alloy 825 Wire Manufacturers In Saudi Arabia

Incoloy Alloy 825 Wire Manufacturers In Saudi Arabia

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Incoloy Alloy 825 Wire, where annealing is done at 1750 Degree F (954 Degree C) with rapid air cool. The resistant to pitting and crevice corrosion of Incoloy 825 Wire and with appropriate heat treating, it is stable against the sensitization to inter – granular corrosion. Incoloy 825 Coil Wire has good mechanical properties at both room and elevated temperatures up to approximately 1000 Degree F.

Incoloy Alloy 825 Wire

Incoloy 825 Wire offers exceptional resistance to corrosion by sulfuric and phosphoric acids and is often the most cost effective alloy in sulfuric acid service. Incoloy 825 Wire is often used in Radioactive waste handling, Nuclear fuel reprocessing, Marine exhaust systems, Pickling tank heaters, tanks, and equipment. Incoloy 825 Wire has good weldability by all conventional processes, and is developed to provide exceptional corrosion resistance in both oxidizing and reducing environments. Alloy 825 Filler Wire, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing environments such as those containing sulfuric and phosphoric acids.

Typical applications of Alloy 825 Coil Wire are: phosphoric acid evaporators; pickling – tank heater, pickling hooks and equipment; etc. Alloy 825 Wire is also used in chemical processing, acid production, oil and gas well piping, propeller shafts, and more. Alloy 825 Wire is characterized by good resistance to chloride – induced pitting and crevice corrosion.

Incoloy Alloy 825 Wire Specifications

Specifications : AMS 5542 / ASTM B425 ASME SB425
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire

825 Incoloy Alloy Wire Chemical Composition

Grade C Mn Si S Al Fe Ni Cr Cu Ti
825 0.05 max 1.00 max 0.05 max 0.03 max 0.02 max 22.0 min 38.0-46.0 19.50-23.50 1.50-3.00 0.06 – 1.20

Incoloy 825 Filler Wire Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

Equivalent Grades for 825 Incoloy Wire

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo XH38BT

Incoloy 825 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

825 Incoloy Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-08T16:58:07+05:30May 2nd, 2022|

Incoloy Alloy 800 Wire Manufacturers In India

Incoloy Alloy 800 Wire Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Incoloy Alloy 800 Wire which belongs to the category of super austenitic stainless steels where the general corrosion resistance is excellent. This Incoloy 800 Wire exhibits an austenite structure similar to austenitic stainless steels, and appropriate heat treatment procedures and requirements are similar. Our Incoloy 800H Wire is often used in Nitric acid catalyst supports, Reformer outlet pigtails and manifolds.

Incoloy Alloy 800 Wire

Applications of this Incoloy 800HT Electrode include furnace components and equipment, pigtails and headers, sheathing for electrical heating elements and petrochemical furnace cracker tubes. In the solution annealed condition, our Incoloy 800 Coil Wire has superior creep and stress rupture properties. The chemical balance allows this Incoloy 800H Wire to exhibit excellent resistance to oxidation, carburization and nitriding atmospheres. Incoloy 800HT Welding Filler is best joined / welded using products for high temperature situations and resistance to aqueous corrosion at moderate temperatures.

Our Incoloy 800 Filler Wire is extremely functional as it maintains a stable structure, even when exposed to high temperature. In addition to the chemistry restrictions, this Incoloy 800H Coil Wire receives a high temperature annealing treatment that produces an average grain size or coarser. Our Incoloy 800HT Welding Electrode is an iron – nickel – chromium alloy having sufficient resistance to carburization and oxidation at high temperatures as well as moderate strength.

Incoloy Alloy 800 Wire Specifications

Specifications : AMS 5766
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire

 800 / 800H / 800HT Incoloy Alloy Wire Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Al Ti
800 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60ᴬ 0.15 – 0.60ᴬ

Incoloy 800 / 800H / 800HT Wire Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
800 / 800H / 800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 800 / 800H / 800HT Incoloy Wire

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4959 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21 XH32T

Incoloy 800/800H/800HT Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

800/800H/800HT Incoloy Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-08T17:10:32+05:30May 2nd, 2022|
Go to Top