LOGO 1200 X 300

Sheets

Monel Alloy K500 Sheets Stockist In India

Monel Alloy K500 Sheets Stockist In India

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Sheets, Plates and Coils. A methodically contemporary alloy, our Monel K500 Sheets, is superior performance alloy that paybacks significantly from binary melting in the course of Electro Slag Refining (ESR) method, which ensures the highest and cleanest quality of material is delivered. These Monel K500 Plates is used for sea water impellers and pump shafts, in addition to being used in the oil well industries for valve trim and other parts.

Monel Alloy K500 Sheets

When in the age – hard-bitten form, Monel K500 Coils (UNS N05500) has a better tendency in the direction of SCC in some atmospheres than Monel 400 Coils. Meanwhile, these Monel K500 Slating Coils are also being offered in different sizes and shapes to our customers. Monel K500 Perforated Coils is a high – chromium nickel alloy having excellent resistance to many corrosive aqueous media and high temperature atmospheres. These Alloy K500 Plates has the highest chromium content (29 % Cr) among nickel alloys suitable for fabrication of pressure equipment, which confers exceptional resistance to oxidizing media.

Alloy K500 Coils are known as high performance alloys, and can be formed in different shapes, which also have good creep and oxidation resistance. In addition to its corrosion resistance, these Alloy K500 Slating Coils has high strength, good metallurgical stability and favorable fabrication characteristics.

Monel Alloy K500 Sheets Specifications
Specifications : ASTM / ASME SB 127
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Monel K500 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Cu Fe Ni
Monel K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min

Monel K500 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel K500 8.44 g/cm3 1350 °C (2460 °F) Psi – 160000 , MPa – 1100 Psi – 115000 , MPa – 790 20 %

Equivalent Grades for K500 Monel Sheets & Plates

STANDARD WERKSTOFF NR. UNS
Monel K500 2.4375 N05500

Monel K500 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Monel K500 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-16T18:34:14+05:30June 4th, 2022|

Monel Alloy 400 Sheets Manufacturers In India

Monel Alloy 400 Sheets Manufacturers In India

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Sheets, Plates and Coils, where it is the responsibility of our group members to inspect these products for any form of finishing defect in that way achieving utmost serenity of the clienteles. Monel 400 Sheets is used for hydrocarbon and chemical processing equipment, marine engineering, shafts, fittings, valves, pumps, fasteners, and heat exchangers. These Monel 400 Plates is used in chemical plant machinery, for the reason that of its excellent corrosion resistance.

Monel Alloy 400 Sheets

Monel 400 Coils shows first – rate corrosion resistance and soaring strength in a variety of alkaline and acidic atmospheres and it’s particularly appropriate for reducing environments. The machinability of these Monel 400 Slating Coils (UNS N04400) is hard as it works-toughens throughout machining. Meanwhile, Monel 400 Perforated Coils are also being offered in different sizes and shapes to our customers. While these Alloy 400 Sheets has a number of advantages, it is far from the perfect metal.

The machinability of Alloy 400 Plates is poor because of their tendency to quickly work – harden. These Alloy 400 Coils could also be easily welded, soldered, and brazed, which also has excellent mechanical properties at subzero temperatures. Strength and hardness Alloy 400 Slating Coils gets increased with only slight impairment of ductility or impact resistance. These Alloy 400 Perforated Coils does not undergo a ductile – to – brittle transition even when cooled to the temperature of liquid hydrogen.

Monel Alloy 400 Sheets Specifications
Specifications : ASTM / ASME SB 127
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Monel 400 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Cu Fe Ni
Monel 400 0.30 max 2.00 max 0.50 max 0.024 max 28.00 – 34.00 2.50 max 63.00 min

Monel 400 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %

Equivalent Grades for 400 Monel Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Monel 400 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe

Monel 400 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Monel 400 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-16T19:12:33+05:30June 3rd, 2022|

Hastelloy X Sheets Stockist In India

Hastelloy X Sheets Stockist In India

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Hastelloy X Sheets, Plates and Coils in an extensive range, where our crew members make it a point to inspect these products on stern quality limits in order to be sure of their seamless toughness. However, procedures of Hastelloy X Plates are outstanding in terms of welding and forming. Hastelloy X Coils is an iron – molybdenum – nickel – chromium alloy that holds an excellent grouping of oxidation resistance, high temperature power and formability.

Hastelloy Alloy X Sheets

Hastelloy X Slating Coils offers robust potency features at high temperatures up to 2200 degree F. An iron – molybdenum – nickel – chromium alloy, Hastelloy X Perforated Coils offers excellent casting characteristics and excellent creep-and-stress rupture attributes. Meanwhile, these Alloy X Plates are also being offered in customized sizes and shapes to our customers. Alloy X Coils also resists sulfuric, phosphoric, formic, acetic acids and other non – oxidizing media. In addition to having exceptional corrosion resistance, Alloy X Slating Coils can also be readily fabricated.

Alloy X Perforated Coils exhibits superior welding conditions, providing excellent as – welded conditions for process applications in chemical – based industries such as food, beverage, personal care, and pharmaceutical. The high chromium content in Hastelloy UNS N06002 Sheets provides good resistance to oxidizing media while the molybdenum and tungsten content give good resistance to reducing media. Alloy N06002 Plates is an ideal material for using in the diverse chemical processes in the as – welded situation.

Hastelloy X Sheets, Plate & Coil Specifications
Specifications : ASTM / ASME SB435
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Hastelloy X Plate, Sheet & Coil Chemical Composition

Grade Ni Mo Cr Fe Mn C Co Si P S
Hastelloy X Balance 8.00 – 10.00 20.50 – 23.00 17.00 – 20.00 1.00 max 0.05 – 0.15 0.50 – 2.50 1.00 max 0.04 max 0.03 max

Alloy X Sheets, Plates & Coils Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.22 g/cm³ 1355°C 655 MPa 240 MPa 35%

Equivalent Grades for X Hastelloy Sheets & Plates

STANDARD WERKSTOFF NR. UNS
Hastelloy X 2.4665 N06002

Hastelloy X Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy X Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-11T14:40:41+05:30June 3rd, 2022|

Hastelloy B3 Sheets Stockist In India

Hastelloy B3 Sheets Stockist In India

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Hastelloy B3 Sheets, Plates, Coils, which are made to excellence using soaring quality steel by our hard – working specialists who holds rich acquaintance in this area. These Hastelloy B3 Plates can function under extremely elevated temperatures, stern mechanical stress, and as well where soaring surface steadiness is essential. Hastelloy B3 Coils also endures formic, phosphoric acids, sulfuric, acetic, and other non – oxidizing media.

These Hastelloy B3 Slating Coils has been mainly used for their resistance to corrosion in non-oxidizing atmospheres such as HCl. Hastelloy B3 Perforated Coils (UNS N10675) is molybdenum – nickel alloy by means of outstanding resistance to pitting, stress – corrosion cracking plus, corrosion, thermal constancy higher to that of Hastelloy B-2. Meanwhile, these Alloy B3 Plates are also being offered in customized sizes and shapes to our customers. Sachiya Steel International is one of the pioneer supplier and dealer of these Alloy B3 Coils, which is very frequently used in heavy gauge welded components.

Hastelloy B3 Sheets

A solution annealing of heat up to 1045 Degree C followed by quenching or rapid cooling will restore the original condition of Alloy B3 Slating Coils, including removing alloy segregation and reestablishing ductility after cold working. While this temperature strength, level of these Alloy B3 Perforated Coils is almost double that of other alloys in the annealed condition, where many oil and gas applications require even greater strength.

Hastelloy B3 Sheets, Plates & Coils Specifications
Specifications : ASTM / ASME SB333
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Hastelloy B3 Plate, Sheet & Coil Chemical Composition

Grade Ni Mo Cr Fe W Mn C Al Ti Si
Hastelloy B3 65.0 min 28.5 1.5 1.5 3.0 max 3.0 max 0.01 max 0.50 max 0.2 max 10 max

Alloy B3 Sheets, Plates & Coils Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
9.2 g/cm3 1370 °C (2550 °F) Psi – 1,15,000 , MPa –760 Psi – 52,000 , MPa – 350 40%

Equivalent Grades for B3 Hastelloy Sheets & Plates

STANDARD WERKSTOFF NR. UNS
Hastelloy B3 2.4600 N010675

Hastelloy B3 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy B3 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-17T12:22:57+05:30June 2nd, 2022|

Hastelloy B2 Sheets Manufacturer In India

Hastelloy B2 Sheets Manufacturer In India

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy B2 Sheets ,Plates, Coils, which are made under the direction of our expert specialists who make sure to use improved techniques and newest tools in the manufacturing procedure. In addition, Hastelloy B2 Plates has excellent pitting resistance and SCC as well. Hastelloy B2 Coils controls other alloying rudiments such as chromium and iron solved other matters relating to fabricability. Molybdenum is the primary alloying component in Hastelloy B2 Slating Coils which offers important corrosion resistance to reducing surroundings.

Hastelloy B2 Perforated Coils is molybdenum – nickel alloy by means of substantial resistance to reducing atmospheres, such as sulfuric, hydrogen chloride gas, phosphoric and acetic acids. Meanwhile, these Alloy B2 Plates are as well being offered in customized sizes and shapes to our customers. Sachiya Steel International is one of the well – known supplier and dealer for Alloy B2 Coils, which is still providing excellent service. The largest fabrication of Alloy B2 Slating Coils known to – date is shown here being thin sheet lined for exposure in a utility flue – gas desulfurization plant.

Hastelloy B2 Sheets

Alloy B2 Perforated Coils was selected to replace a FRP fan because of its durability and corrosion resistance, where this fan will handle the incineration of radioactive and hazardous wastes. A practical concern related to susceptibility of Hastelloy UNS N10665 Sheets to inter – granular corrosion is the heat – affected zone of weldments.

Hastelloy B2 Sheets, Plates & Coils Specifications
Specifications : ASTM / ASME SB333
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Hastelloy B2 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
B2 0.010 max 1.00 max 0.08 max 0.03 max 2.50 max 50.99 min* 14.50 – 16.50 4.00 – 7.00 15.00 – 17.00 0.04 max

Alloy B2 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy B2 8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40 %

Equivalent Grades for B2 Hastelloy Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy B2 2.4617 N10665 NW 0276 ХН65МВУ NiMo16Cr15W ЭП760

Hastelloy B2 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy B2 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-18T15:39:01+05:30June 2nd, 2022|

Hastelloy C276 Sheets Manufacturer In India

Hastelloy C276 Sheets Manufacturer In India

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy C276 Sheets, Plates, Coils, which is an anti – galling stainless steel that has excellent wear resistance. Hastelloy C276 Plates has outstanding resistance to pitting, oxidizing and stress – corrosion cracking environments up to 1900 Degree F. Hastelloy C276 Coils have outstanding resistance to pitting, stress corrosion and crevice corrosion cracking. Hastelloy C276 Slating Coils has excellent machinability, though the alloy work toughens as is correct of the nickel base alloys overall.

The high molybdenum and nickel contents in Hastelloy C276 Perforated Coils (UNS N10276) make this nickel steel alloy particularly resistant to crevice corrosion and pitting in reducing atmospheres while chromium content delivers resistance to oxidizing media. Meanwhile, these Alloy C276 Plates are also being offered in customized sizes and shapes to our customers. Temperature solution of these Alloy C276 Coils can be heat treated up to 1800 Degree F (982 Degree C), 1 hour, oil quenched, aged 1325 Degree F (718 Degree C), 16 hours, and then air cooled.

Hastelloy C276 Sheets

In the solution treated condition, Alloy C276 Slatting Coils can be satisfactorily cold drawn and formed. It is somewhat stiffer than stainless steels such as SS 316 and SS 310, and it work hardens rapidly. These Alloy C276 Perforated Coils has uniform corrosion resistance and provides great high – temperature oxidation resistance as well.

Hastelloy C276 Sheets, Plates & Coils Specifications
Specifications : ASTM / ASME SB575
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Hastelloy C276 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
C276 0.010 max 1.00 max 0.08 max 0.03 max 2.50 max 50.99 min* 14.50 – 16.50 4.00 – 7.00 15.00 – 17.00 0.04 max

Alloy C276 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C276 8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40 %

Equivalent Grades for C276 Hastelloy Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C276 2.4819 N10276 NW 0276 ХН65МВУ NiMo16Cr15W ЭП760

Hastelloy C276 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy C276 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-15T17:17:34+05:30June 1st, 2022|

Hastelloy C22 Sheets Manufacturers In India

Hastelloy C22 Sheets Manufacturers In India

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy C22 Sheets, Plates, Coils to the esteemed patrons, which has some admirable features to offer such as durable, easy to fit, fine finish, and so on. We also offer these Hastelloy C22 Sheets at market leading rates. These Hastelloy C22 Plates have been used in strict process atmospheres such as those bump into the metal pickling amenities, chemical process industry, flue gas desulfurization scrubbers, nuclear fuel reprocessing, electronics manufacturing, and so on.

Hastelloy C22 Coils (UNS N06022) resists the development of grain boundary precipitates in the weld-heat affected region making it appropriate for use in the as – welded form. Meanwhile, these Hastelloy C22 Slating Coils are also being offered in customized sizes and shapes to our customers. Wrought products of Hastelloy C22 Perforated Coils are supplied in the Mill Annealed (MA) condition, unless otherwise specified. This solution annealing procedure has been designed to optimize the corrosion resistance and ductility of Alloy C22 Sheets.

Hastelloy C22 Sheets

Following all hot forming operations, Alloy C22 Plates should be re – annealed, to restore optimum properties. Alloy C22 Coils should also be re-annealed after any cold forming operations that result in an outer fiber elongation of 7 % or more. Alloy C22 Slating Coils is stiffer than most austenitic stainless steels, and more energy is required during cold forming. Alloy C22 Perforated Coils also provides guidelines for cold forming, spinning, drop hammering, punching, and shearing.

Hastelloy C22 Sheets, Plates & Coils Specifications
Specifications : ASTM / ASME SB575
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Hastelloy C22 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
C22 0.010 max 0.50 max 0.08 max 0.02 max 2.50 max 50.015 min* 20.00 – 22.50 2.00 – 6.00 12.50 – 14.50 0.02 max

Alloy C22 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C22 8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %

Equivalent Grades for C22 Hastelloy Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C22 2.4602 N06022 NW 6022 – NiCr21Mo14W –

Hastelloy C22 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy C22 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-16T11:53:34+05:30June 1st, 2022|

Alloy Steel Grade 22 Sheets Manufacturers In India

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Alloy Steel Grade 22 Sheets, Plates, Coils, which is owing to expertise and can be provided in customized specifications to our clients. The raw materials in Alloy Steel Grade 22 Plates used have been tested and then used to confirm the robust and sturdy character of this product. The offered Alloy Steel Grade 22 Coils can be available from us on numerous sizes options as per the needs of the patrons.

Alloy Steel Grade 22 Sheets

Alloy Steel Grade 22 Slating Coils is a high – strength, nickel based, corrosion resistant alloys which is perfectly suited for chemical applications. We have marked a remarkable position in the market by offering the best quality array of Alloy Steel Grade 22 Perforated Coils, which offer some great features such as Ruggedness, Rust proof, Easy to install and more.

Economically produced Alloy Steel Gr. 22 Plates for moderate working temperature up to 150 Degree C is ensured by tension forming fin strip helically around the base tube. For designing of Alloy Steel Gr. 22 Coils, our reliable sources use of top quality steel and modern techniques. The higher levels of chromium in Alloy Steel Gr. 22 Slating Coils also provide excellent corrosion and oxidation resistance, which is a must in sour gas applications. Sachiya Steel International firmly believes in catering to the needs of the customers by way of supplying genuine – tested materials at extremely reasonable rates.

Alloy Steel Gr 22 Sheet, Plate & Coil Specifications
Specifications : ASTM A387 / ASME SA387
Thickness : 1mm-300mm
Width
 : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, 4050mm etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, 12000mm, 15000mm etc
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip etc.

Alloy Steel Gr 22 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
Alloy Steel Gr 22 0.05 – 0.15 0.30-0.60 0.50 max 0.035 max 0.035 max 2.0 – 2.5 0.90 – 1.10 – –

Alloy Steel Gr 22 Sheets, Plates & Coils Tensile Requirements

Tensile (MPa) Yield (MPa) Elongation (50mm) Elongation (200mm) Reduction of Area
415 – 585 205 min 18% min – 40% min

Alloy Steel Gr 22 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel Gr 22 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-15T16:09:10+05:30May 31st, 2022|

Alloy Steel Grade 12 Sheets Manufacturers In India

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Alloy Steel Grade 12 Sheets, Plates, Coils, which offers some remarkable features to our clients such as the product is Leak proof, Heat resistance, Light weight and so on. Our Alloy Steel Grade 12 Plates have a number of dedicated buyers across the country and globally mainly due to the high levels of international industrial standards adhered to by us. Alloy Steel Grade 12 Coils is designed in conformation with industrial standards, which can be availed in different sizes, length and specifications.

Alloy Steel Grade 12 Sheets

We are a prestigious company engaged in offering a superior quality Alloy Steel Grade 12 Slating Coils, which are manufactured by our experts using quality approved material with the help of modern technology in accordance with set standards of industry. Sachiya Steel International is engaged in offering an exclusive range of Alloy Steel Grade 12 Perforated Coils which are manufactured from quality raw material. A good finned Alloy Steel Gr. 12 Plates can be made by the strict conditions such as copper density, grain size and hardness.

Pressure vessel grade alloy such as these Alloy Steel Gr. 12 Coils is meant for its usage in elevated temperature service, which is further used in a variety of industries and is highly effective, particularly in the oil, gas and petrochemical industry, where liquids and gases are often stored at higher temperatures.

Alloy Steel Gr 12 Sheet, Plate & Coil Specifications
Specifications : ASTM A387 / ASME SA387
Thickness : 1mm-300mm
Width
 : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, 4050mm etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, 12000mm, 15000mm etc
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip etc.

Alloy Steel Gr 12 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
Alloy Steel Gr 12 0.05 – 0.17 0.40-0.65 0.15 – 0.40 0.035 max 0.035 max 0.80 – 1.15 0.45 – 0.60 – –

Alloy Steel Gr 12 Sheets, Plates & Coils Tensile Requirements

Tensile (MPa) Yield (MPa) Elongation (50mm) Elongation (200mm) Reduction of Area
380 – 550 230 min 22% min 18% min –

Alloy Steel Gr 12 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel Gr 12 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-15T15:33:39+05:30May 31st, 2022|

Alloy Steel Grade 11 Sheets Stockist In India

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Alloy Steel Grade 11 Sheets, Plates, Coils, which is integrally extended for the maximum surface area to achieve high tube efficiency. The high levels of mechanical support provided by Alloy Steel Grade 11 Plates are widely appreciated by our clients and the structural engineers directly involved in the complete process. Alloy Steel Grade 11 Coils is known for superior quality and high utility, which is widely demanded in various industries across the nation. Alloy Steel Grade 11 Slating Coils offers some great features such as High strength, Compact design, Perfect in dimension and more.

Alloy Steel Grade 11 Sheets

Under the guidelines of deft professionals, the offered Alloy Steel Grade 11 Perforated Coils is manufactured by using the best grade stainless steel with contemporary technology. Alloy Steel Gr. 11 Plates we offer are tested on defined quality parameters to reassure its flawlessness before the supply. Alloy Steel Gr. 11 Coils serves the oil, gas and petrochemical industry, where these industries require a pressure vessel grade steel which works well in elevated temperatures and our material serves this purpose well.

Alloy Steel Gr. 11 Slating Coils offered by Sachiya Steel International is from prime manufacturers & has zero rejections, where further we make it available to our patrons at suitable market leading cost. We provide Alloy Steel Gr. 11 Perforated Coils to our clients to make the order according to their specifications and requirements.

Alloy Steel Gr 11 Sheet, Plate & Coil Specifications
Specifications : ASTM A387 / ASME SA387
Thickness : 1mm-300mm
Width
 : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, 4050mm etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, 12000mm, 15000mm etc
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip etc.

Alloy Steel Gr 11 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
Alloy Steel Gr 11 0.05 – 0.17 0.40-0.65 0.50 – 0.80 0.035 max 0.035 max 1.0 – 1.5 0.45 – 0.65 – –

Alloy Steel Gr 11 Sheets, Plates & Coils Tensile Requirements

Tensile (MPa) Yield (MPa) Elongation (50mm) Elongation (200mm) Reduction of Area
415 – 585 240 min 22% min 19% min –

Alloy Steel Gr 11 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel Gr 11 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-15T15:21:42+05:30May 30th, 2022|
LOGO 1200 X 300

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top