Sachiya Steel International

Sheets

EN8 Carbon Steel Sheets Stockist

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality EN8 Carbon Steel Sheets, Plates, Coils, a proven material for producing boiler and pressure vessels of ASME. For applications requiring maximum ductility, these EN8 Carbon Steel Plates with low sulfur levels can be supplied by producers using ladle–refining techniques. In general, wear resistance can be improved by increasing the hardness of EN8 Carbon Steel plates, by specifying an alloy with greater carbon content (without increasing hardness), or by both.

EN8 Carbon Steel Sheets Manufacturer In India | EN8 Carbon Steel Sheets Manufacturer In Mumbai | EN8 Carbon Steel Sheets Exporter In India | EN8 Carbon Steel Sheets Exporter In Mumbai | EN8 Carbon Steel Sheets Supplier In India | EN8 Carbon Steel Sheets Supplier In Mumbai | EN8 Carbon Steel Sheets Stockist In India | EN8 Carbon Steel Sheets Stockist In Mumbai
EN8 Carbon Steel Sheets

EN8 Carbon Steel Sheets

These EN8 Carbon Steel Slating Coils, which have good mechanical properties at ambient and elevated temperatures of up to 930 Degree F (500 Degree C), are readily fabricated using common industrial techniques. The chemical composition of EN8 Carbon Steel Perforated Coils provides great resistance to several corrosive environments, such as pitting, crevice corrosion, inter – granular corrosion, and stress – corrosion cracking. The majority of these EN8 CS Plates make additions to a nickel-iron-chromium base.

These additions allow EN8 CS Coils to adapt to the needs of a variety of industries and enable leading metal companies to offer a range of duplex shapes and designs. EN8 CS Slating Coils have good mechanical properties from moderately to high temperatures. The hot–working range is 1600 Degree F to 2150 Degree F, where in addition these EN8 CS Perforated Coils has good weldability by all conventional processes.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
EN8 Plates Specifications
Thickness : from 3mm up to as thick as 150mm
Size
 : from 2000 x 1000mm up to 4000 x 2000mm
Length
 : 100mm to 6000mm
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), Bright, Polish & Black
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
EN8 Plates Chemical Composition
Grade C Mn P S Si
EN8 0.35 TO 0.45 0.60 TO 1.00 0.06 max 0.06 max 0.05 – 0.30
EN8 Sheets, Plates Heat Treatment
Grade HEAT TREATMENT CORRESPONDING SPECIFICATION
Hardening Temperature Quenching Medium Tempering Temperature Brinell Rock well hardness JAPAN JIS AISI POLDI THREAD
EN-8 750-900 OIL 150-200  –  – –  –
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
EN8 Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
EN8 Sheets, Plate Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
EN8 Carbon Steel Sheets
EN8 Carbon Steel Sheets

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality EN8 Carbon Steel Sheets, Plates, Coils, a proven material for producing boiler and pressure vessels of ASME. For applications requiring maximum ductility, these EN8 Carbon Steel Plates with low sulfur levels can be supplied by producers using ladle–refining techniques. In general, wear resistance can be improved by increasing the hardness of EN8 Carbon Steel plates, by specifying an alloy with greater carbon content (without increasing hardness), or by both.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2022-06-10T11:51:44+05:30June 10th, 2022|

ASTM A516 Grade 65 Sheets Stockist

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality ASTM A516 Grade 65 Sheets, Plates, Coils, where solutions of sodium chloride can begin to have a corrosive effect. The slightly higher worth purpose of ASTM A516 Gr. 65 Carbon Steel Plates is well worthwhile in areas with high chloride exposure, particularly the coast and heavily salt – cured roadways. ASME SA 516 Gr. 65 Carbon Steel Coils is the most common form of steel used around the world, largely due to its excellent corrosion resistance and value.

ASTM A516 Grade 65 Sheets

ASTM A516 Gr. 65 Carbon Steel Slating Coils contains between 16 percent and 24 percent chromium and up to 35 percent nickel — as well as small amounts of carbon and manganese. The slightly higher price point of ASME SA 516 Gr. 65 Carbon Steel Perforated Coils is well worth it in areas with high chloride exposure, especially the coast and heavily salted roadways. The durability makes ASTM A516 Gr. 65 CS Plates easy to sanitize, and therefore ideal for kitchen and food applications.

It is also common in buildings, décor, and site furnishings. The metallurgical characteristics of ASME SA 516 Gr. 65 CS Coils are established primarily by the nickel content (8 % mm.), which also extends resistance to corrosion caused by reducing chemicals. ASTM A516 Gr. 65 CS Slating Coils, a necessity of mixed benefit, is held at a level (0.08 % max.) that is satisfactory for most service applications.

ASTM A516 Grade 65 Plates Specifications
Specifications : ASTM A516
Thickness : 8-100mm
Width
 : 1500-3500mm
Length
 : 3000-8000mm
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip etc.

ASTM A516 Grade 65 Plates Chemical Composition

Grade C Mn P S Si
A516 Grade 65 0.24-0.29 0.79 – 1.30 0.035 max 0.035 max 0.13-0.45

ASTM A516 Grade 65 Sheets, Plates Mechanical Properties

Grade Thickness Yield Tensile Elongation
A516 Grade 65  6-100mm MPa -240 min MPa – 450-585 19-23%

ASTM A516 Grade 65 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

ASTM A516 Grade 65 Sheets, Plate Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-04T18:42:33+05:30June 8th, 2022|

ASTM A516 Grade 60 Sheets Stockist

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality ASTM A516 Grade 60 Sheets, Plates, Coils, which differs from other carbon steel by the amount of chromium present. Unprotected ASTM A516 Gr. 60 Carbon Steel Plates rusts readily when exposed to air and moisture. Sachiya Steel International is also one of the well – known supplier and dealer for high quality ASME SA 516 Gr. 60 Carbon Steel Coils, which is a nickel – iron – chromium alloy with titanium, copper, and molybdenum.

ASTM A516 Grade 60 Sheets

ASTM A516 Gr. 60 Carbon Steel Slating Coils has good mechanical properties at cryogenic temperatures to moderately high temperatures up to 538 Degree C. ASME SA 516 Gr. 60 Carbon Steel Perforated Coils, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing environments such as those containing sulphuric and phosphoric acids. The chemical composition of ASTM A516 Gr. 60 Carbon Steel Slating Coils is designed to provide exceptional resistance to a lot of corrosive environments.

The levels of molybdenum and copper enable ASME SA 516 Gr. 60 Carbon Steel Perforated Coils to resist reducing agents and acids. Chromium in ASTM A516 Gr. 60 CS Plates gives resistance to oxidizing conditions, such as nitric acid solutions, nitrates and oxidizing salts. ASME SA 516 Gr. 60 CS Coils are highly sought after due to their ability to resist both oxidization and carbonization in high – temperature settings.

ASTM A516 Grade 60 Plates Specifications
Specifications : ASTM A516
Thickness : 8-100mm
Width
 : 1500-3500mm
Length
 : 3000-8000mm
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip etc.

ASTM A516 Grade 60 Plates Chemical Composition

Grade C Mn P S Si
A516 Grade 60 0.21-0.27 0.55 – 0.98 0.035 max 0.035 max 0.13-0.45

ASTM A516 Grade 60 Sheets, Plates Mechanical Properties

Grade Thickness Yield Tensile Elongation
A516 Grade 60  6-100mm MPa -220 min MPa – 415-550 21-25%

ASTM A516 Grade 60 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

ASTM A516 Grade 60 Sheets, Plate Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-04T18:30:45+05:30June 8th, 2022|

ASTM A515 Grade 70 Sheets Stockist

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality ASTM A515 Grade 70 Sheets, Plates, Coils, which should be machined by the procedures given other alloys. The advantage of high strength in ASTM A515 Gr. 70 Carbon Steel Plates immediately becomes a disadvantage when considering formability and machinability. Due to their high chromium content, ASME SA 515 Gr. 70 Carbon Steel Coils offer excellent corrosion resistance in many media. ASTM A515 Gr. 70 Carbon Steel Slating Coils have very limited use in hydrochloric acid because of the risk of uniform and localized corrosion.

ASTM A515 Grade 70 Sheets

High – alloyed steels such as ASME SA 515 Gr. 70 Carbon Steel Perforated Coils can be used in dilute hydrochloric acid, where there is no single measure of corrosion resistance. The best steels to use for this purpose are the high nickel austenitic steels such as ASTM A515 Gr. 70 CS Plates. The resistance to pitting and crevice corrosion in ASME SA 515 Gr. 70 CS Coils increases with the content of chromium, molybdenum, and nitrogen in the steel. However, ASTM A515 Gr. 70 CS Slating Coils is convenient to use the Pitting Resistance Equivalent Number (PREN) as a means of ranking the grades.

Sachiya Steel International is one of the well-known exporters and manufacturers for high-quality ASME SA 515 Gr. 70 CS Perforated Coils, which is normally used in the annealed temper, and strength characteristics described below are representative of annealed material.

ASTM A515 Grade 70 Plates Specifications
Specifications : ASTM A515
Thickness : 8-100mm
Width
 : 1500-3500mm
Length
 : 3000-8000mm
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip etc.

ASTM A515 Grade 70 Plates Chemical Composition

Grade The Element Max (%)
C Mn P S Si
A515 grade 70 0.30-0.35 1.30 0.035 0.035 0.13-0.45

ASTM A515 Grade 70 Sheets, Plates Mechanical Properties

Grade Thickness Yield Tensile Elongation
A515 Grade 70  50-200mm MPa -551 min MPa – 485-620 17-21%

Dimension Chart of ASTM A515 Grade 70 Carbon Steel Plates

Thickness in Inches Widths Lengths Lbs/Sft
3/16 48, 60, 72, 84, 96 96, 120, 124,133, 144, 156, 240 7.660
1/4 48, 60, 72, 84, 96 96,110, 120, 144, 240 10.210
5/16 48, 60, 72, 96 96, 120, 240 12.760
3/8 48, 60, 72, 84, 96 96, 120, 144, 169, 240, 260 15.320
7/16 96 240 17.870
1/2 48, 60, 72, 84, 96 96, 120, 144, 240 20.420
5/8 48, 96, 120, 240, 480 25.530
3/4 48, 72, 84, 96 96, 120, 240, 480 30.630
7/8 96 240 35.740
1 48, 72, 96 96, 120, 240, 480 40.840
1 1/8 96 240 45.950
1 1/4 48, 96 96, 120, 240 51.050
1 3/8 96 240 56.160
1 1/2 96 120, 240 61.260
1 5/8 96 240 66.370
1 3/4 96 240 71.470
2 96 120, 240 81.680
2 1/4 96 240 91.890
2 1/2 96 240 102.100
2 3/4 96 240 112.310
3 96 240 122.520
3 1/4 96 144 132.730
3 1/2 96 120 142.940
3 3/4 96 120 153.150
4 96 144, 180 163.360
4 1/4 96 120 173.570
4 1/2 96 120 183.780
5 96 144 204.200
6 96 120 245.040
7 96 160 285.880

ASTM A515 Grade 70 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

ASTM A515 Grade 70 Sheets, Plate Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-04T18:12:01+05:30June 7th, 2022|

ASTM A515 Grade 60 Sheets Stockist

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality ASTM A515 Grade 60 Sheets, Plates, Coils, where examples of its applications are lock wire, exhaust liners, and turbine seals. Iron base high-temperature alloy such as ASTM A515 Gr. 60 Carbon Steel Plates using temperature normally only up to 750 Degree D – 780 Degree C, in the higher temperature of the heat used parts, used the nickel refractory metal.

ASTM A515 Grade 60 Sheets

Laboratory tests of ASME SA 515 Gr. 60 Carbon Steel Coils at 200 Degree C (390 Degree F) in contaminated 95 % super phosphoric acid showed corrosion rates. Light forming of ASTM A515 Gr. 60 Carbon Steel Slitting Coils can be done at temperatures down to 1600 Degree F (870 Degree C). Above about 20 % sulphuric acid, ASME SA 515 Gr. 60 Carbon Steel Perforated Coils is even more resistant than stainless steel. The behavior of ASTM A515 Gr. 60 CS Plates during cold forming is similar to that of other alloys.

The usual annealing temperature of ASME SA 515 Gr. 60 CS Coils is approximately 1900 Degree F (1040 Degree C). In the aeronautical field, ASTM A515 Gr. 60 CS Slating Coils is used for various engine and airframe components that must withstand high temperatures. In various types of high–temperature water, ASME SA 515 Gr. 60 CS Perforated Coils displays low corrosion rates and excellent resistance to stress–corrosion cracking.

ASTM A515 Grade 60 Plates Specifications
Specifications : ASTM A515
Thickness : 8-100mm
Width
 : 1500-3500mm
Length
 : 3000-8000mm
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, etc.
Production : Hot-Rolled (HR)
Heat Treatment : Rolled/Normalized/N+T/QT

ASTM A515 Grade 60 Plates Chemical Composition

Grade C Mn P S Si
A515 Grade 60 0.24-0.31 0.98 max 0.035 max 0.035 max 0.13-0.45

ASTM A515 Grade 60 Sheets, Plates Mechanical Properties

Grade Thickness Yield Tensile Elongation
A515 Grade 60  50-200mm MPa -220 min MPa – 415-550 21-25%

A515 Grade 60 Carbon Steel Plate Thickness Chart

Thickness in Inches Width Length Lbs/Sft
3/16 48, 60, 72, 84, 96 96, 120, 124,133, 144, 156, 240 7.660
1/4 48, 60, 72, 84, 96 96,110, 120, 144, 240 10.210
5/16 48, 60, 72, 96 96, 120, 240 12.760
3/8 48, 60, 72, 84, 96 96, 120, 144, 169, 240, 260 15.320
7/16 96 240 17.870
1/2 48, 60, 72, 84, 96 96, 120, 144, 240 20.420
5/8 48, 96, 120, 240, 480 25.530
3/4 48, 72, 84, 96 96, 120, 240, 480 30.630
7/8 96 240 35.740
1 48, 72, 96 96, 120, 240, 480 40.840
1 1/8 96 240 45.950
1 1/4 48, 96 96, 120, 240 51.050
1 3/8 96 240 56.160
1 1/2 96 120, 240 61.260
1 5/8 96 240 66.370
1 3/4 96 240 71.470
2 96 120, 240 81.680
2 1/4 96 240 91.890
2 1/2 96 240 102.100
2 3/4 96 240 112.310
3 96 240 122.520
3 1/4 96 144 132.730
3 1/2 96 120 142.940
3 3/4 96 120 153.150
4 96 144, 180 163.360
4 1/4 96 120 173.570
4 1/2 96 120 183.780
5 96 144 204.200
6 96 120 245.040
7 96 160 285.880

Equivalent Material of ASME SA515 GR 60 BQ Plates

British Standard European Norm ASTM/ASME DIN
BS1501-161-430A EN10028 P265GH A/SA515 – Grade 60 DIN 17155 HII

ASTM A515 Grade 60 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

ASTM A515 Grade 60 Sheets, Plate Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-04T18:06:25+05:30June 7th, 2022|

Carbon Steel Sheets Stockist

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Carbon Steel Sheets, Plates, Coils, which must be emphasized that this is only a guide to material selection. We also offer the same in different grades and specifications such as ASTM A515 Gr. 70 Carbon Steel Sheets Plates Coils, ASTM A515 Gr. 60 Carbon Steel Sheets Plates Coils, ASTM A516 Gr. 70 Carbon Steel Sheets Plates Coils, ASTM A516 Gr. 60 Carbon Steel Sheets Plates Coils, ASTM A516 Gr. 65 Carbon Steel Sheets Plates Coils, ASTM C45 Carbon Steel Sheets Plates Coils, EN8 Carbon Steel Sheets Plates Coils, and ASTM A572 Gr. 42, 50 Carbon Steel Sheets Plates Coils.

Carbon Steel Sheets Manufacturer In India | Carbon Steel Sheets Manufacturer In Mumbai | Carbon Steel Sheets Exporter In India 
Carbon Steel Sheets

Carbon Steel Sheets

The range of Carbon Steel Plates allows them to be matched for corrosion resistance with the austenitic and ferrite steel grades. It is always important to assess the suitability of a particular Carbon Steel Coils with full knowledge of the corrosive environment. Structures of Carbon Steel Slitting Coils in swimming pools are known to be prone to SCC.

The use of standard austenitic stainless steel like Carbon Steel Perforated Coils is forbidden in this application. Sachiya Steel International is a well–known dealer and exporter for high-quality CS Plates, which is available in different sizes and shapes as per our clients’ requirements. The high strength in CS Coils also comes with lower ductility than austenitic grades.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Carbon Steel Sheet, Plate & Coil Specifications
Specifications : ASTM A283, A516 / ASME SA283, SA516
Thickness : 3/16″ to 24″
Width & Length
 : 1 mm TO 200 mm THK in 1000 mm to 3000 mm width x 2500 mm / 5000 mm / 10000 mm
grade
 : 517 GR. 60 / 70, IS 2062, IS 2002
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Carbon Steel Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Carbon Steel Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Carbon Steel Sheets
Carbon Steel Sheets

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Carbon Steel Sheets, Plates, Coils, which must be emphasized that this is only a guide to material selection. We also offer the same in different grades and specifications such as ASTM A515 Gr. 70 Carbon Steel Sheets Plates Coils, ASTM A515 Gr. 60 Carbon Steel Sheets Plates Coils, ASTM A516 Gr. 70 Carbon Steel Sheets Plates Coils, ASTM A516 Gr. 60 Carbon Steel Sheets Plates Coils, ASTM A516 Gr. 65 Carbon Steel Sheets Plates Coils, ASTM C45 Carbon Steel Sheets Plates Coils, EN8 Carbon Steel Sheets Plates Coils, and ASTM A572 Gr. 42, 50 Carbon Steel Sheets Plates Coils.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]

By |2022-06-06T12:10:24+05:30June 6th, 2022|

Nickel Alloy 201 Sheets Stockist In India

Nickel Alloy 201 Sheets Stockist In India

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Sheets, Plates, Coils, which resists attack from phosphoric acid and have been successfully used with nitric acid. These Nickel 201 Plates is unaffected by any of the weak bases such as ammonium hydroxide, even in high concentrations and at high temperatures. Our Nickel 201 Coils exposed to stronger bases such as sodium hydroxide at high concentrations and high temperatures will likely experience some etching and cracking, especially with solutions containing chlorides such as sodium hypochlorite.

Nickel Alloy 201 Sheets

Like steel, these Nickel 201 Slating Coils is a relatively poor conductor of electricity, with significantly lower electrical conductivity than copper. Other metals in contact with our Nickel 201 Perforated Coils, particularly in a damp or acidic environment, may suffer galvanic corrosion even though the stainless metal may be unaffected. These Alloy 201 Sheets is generally highly resistant to attack from acids, but this quality depends on the kind and concentration of the acid, the surrounding temperature, and the type of steel.

Our Alloy 201 Plates is resistant to sulphuric acid at room temperature, even in high concentrations. These Alloy 201 Coils are both useful for storing and handling acetic acid, especially in solutions where it is combined with formic acid and when aeration is not present (oxygen helps protect steel under such conditions), though it provides the greatest level of resistance to corrosion.

Nickel Alloy 201 Sheets, Plate & Coil Specifications
Specifications : ASTM / ASME SB 162
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Nickel 201 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Cu Fe Ni
Nickel 201 0.02 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel 201 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 201 Nickel Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 – LC-Ni 99

Nickel 201 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel 201 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-13T15:39:24+05:30June 6th, 2022|

Nickel Alloy 200 Sheets Stockist In India

Nickel Alloy 200 Sheets Stockist In India

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Nickel Alloy 200 Sheets, Plates and Coils to the respected patrons. Nickel 200 Sheets (UNS N02200) has a low annealed rigidity and extremely low work – toughening rate. Nickel 200 Plates is used in food handling machinery, general corrosion – resistant structures and parts, caustic solutions, etc. Nickel 200 Coils is chosen with beyond 315 Degree C, for the reason that of its enhanced resistance to “creep.” Nickel 200 Slating Coils is ferromagnetic and has comparatively low electrical resistivity, which consists of low carbon version of the alloy.

Nickel Alloy 200 Sheets

By means of Nickel 200 Perforated Coils, the limitations of both alloys are merged into a solitary dual chemistry that outcomes in a distinct alloy by means of the finest features of both. Meanwhile, these Alloy 200 Sheets are also being offered in different sizes and shapes to our customers. Alloy 200 Plates is combined with higher creep properties at temperature and unsullied to form incredibly powerful and ductile. The unsullied of Alloy 200 Coils has smart resistance to oxidization and will be employed in continuous service up to 1140 Degree C provided reducing Sulphur gases don’t seem to be gift.

The high metal and nickel contents of Alloy 200 Slating Coils offer comparable corrosion resistance, superior resistance to oxidization. Therefore the retention of Alloy 200 Perforated Coils has a bigger fraction of temperature strength than the common solid solution alloys like 304.

Nickel Alloy 200 Sheets, Plates & Coils Specifications
Specifications : ASTM / ASME SB 168
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Nickel 200 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Cu Fe Ni
Nickel 200 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel 200 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 200 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 200 Nickel Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2

Nickel 200 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel 200 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-13T17:51:52+05:30June 4th, 2022|

Monel Alloy K500 Sheets Stockist In India

Monel Alloy K500 Sheets Stockist In India

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Sheets, Plates and Coils. A methodically contemporary alloy, our Monel K500 Sheets, is superior performance alloy that paybacks significantly from binary melting in the course of Electro Slag Refining (ESR) method, which ensures the highest and cleanest quality of material is delivered. These Monel K500 Plates is used for sea water impellers and pump shafts, in addition to being used in the oil well industries for valve trim and other parts.

Monel Alloy K500 Sheets

When in the age – hard-bitten form, Monel K500 Coils (UNS N05500) has a better tendency in the direction of SCC in some atmospheres than Monel 400 Coils. Meanwhile, these Monel K500 Slating Coils are also being offered in different sizes and shapes to our customers. Monel K500 Perforated Coils is a high – chromium nickel alloy having excellent resistance to many corrosive aqueous media and high temperature atmospheres. These Alloy K500 Plates has the highest chromium content (29 % Cr) among nickel alloys suitable for fabrication of pressure equipment, which confers exceptional resistance to oxidizing media.

Alloy K500 Coils are known as high performance alloys, and can be formed in different shapes, which also have good creep and oxidation resistance. In addition to its corrosion resistance, these Alloy K500 Slating Coils has high strength, good metallurgical stability and favorable fabrication characteristics.

Monel Alloy K500 Sheets Specifications
Specifications : ASTM / ASME SB 127
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Monel K500 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Cu Fe Ni
Monel K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min

Monel K500 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel K500 8.44 g/cm3 1350 °C (2460 °F) Psi – 160000 , MPa – 1100 Psi – 115000 , MPa – 790 20 %

Equivalent Grades for K500 Monel Sheets & Plates

STANDARD WERKSTOFF NR. UNS
Monel K500 2.4375 N05500

Monel K500 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Monel K500 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-16T18:34:14+05:30June 4th, 2022|

Monel Alloy 400 Sheets Manufacturers In India

Monel Alloy 400 Sheets Manufacturers In India

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Sheets, Plates and Coils, where it is the responsibility of our group members to inspect these products for any form of finishing defect in that way achieving utmost serenity of the clienteles. Monel 400 Sheets is used for hydrocarbon and chemical processing equipment, marine engineering, shafts, fittings, valves, pumps, fasteners, and heat exchangers. These Monel 400 Plates is used in chemical plant machinery, for the reason that of its excellent corrosion resistance.

Monel Alloy 400 Sheets

Monel 400 Coils shows first – rate corrosion resistance and soaring strength in a variety of alkaline and acidic atmospheres and it’s particularly appropriate for reducing environments. The machinability of these Monel 400 Slating Coils (UNS N04400) is hard as it works-toughens throughout machining. Meanwhile, Monel 400 Perforated Coils are also being offered in different sizes and shapes to our customers. While these Alloy 400 Sheets has a number of advantages, it is far from the perfect metal.

The machinability of Alloy 400 Plates is poor because of their tendency to quickly work – harden. These Alloy 400 Coils could also be easily welded, soldered, and brazed, which also has excellent mechanical properties at subzero temperatures. Strength and hardness Alloy 400 Slating Coils gets increased with only slight impairment of ductility or impact resistance. These Alloy 400 Perforated Coils does not undergo a ductile – to – brittle transition even when cooled to the temperature of liquid hydrogen.

Monel Alloy 400 Sheets Specifications
Specifications : ASTM / ASME SB 127
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Monel 400 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Cu Fe Ni
Monel 400 0.30 max 2.00 max 0.50 max 0.024 max 28.00 – 34.00 2.50 max 63.00 min

Monel 400 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %

Equivalent Grades for 400 Monel Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Monel 400 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe

Monel 400 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Monel 400 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-16T19:12:33+05:30June 3rd, 2022|

SACHIYA STEEL INTERNATIONAL

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top