LOGO 1200 X 300

Nipple

Stainless Steel 347 Nipple Manufacturers In India

Sachiya Steel International is one of the well-known manufacturers of Stainless Steel 347 Nipple, in which silver brazing compounds are known to cause stress cracking in nickel – based alloys. Rupture and creep properties of SS 347 Hexagon Reducing Nipple shown in this bulletin are typical of material receiving this low – temperature treatment.

Slow response of Stainless Steel 347 Hexagon Nipple to age hardening enables parts to be welded and directly age – hardened without an intermediate stress relief. If Stainless Steel 347 One End Threaded Nipple is cold – worked and / or precipitation – hardened, silver brazing compounds should not be used.

Also, SS 347 Both End Threaded Nipple containing cadmium are best avoided; while cadmium has not been shown to cause cracking by itself, it can aggravate cracking from other sources. Room – temperature properties of welds in Stainless Steel 347 Concentric Swaged Nipple receiving the low temperature anneal and / or age can be compared with results of the high – temperature anneals and / or age.

Additional properties of welds in Stainless Steel 347 Eccentric Swaged Nipple is annealed at 1950 Degree and aged at 1400 Degree F to 1200 Degree F, hold at 1200 Degree F for a total aging time of 20 hours. Welding was by the manual gas tungsten-arc process, using 347 Stainless Steel Nipple, where these welds were found satisfactory in bend tests and radiographic examination.

Stainless Steel 347 Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 347 Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
347 min. – – – – – 17.0 – 9.0 –
max. 0.08 2.0 1.0 0.040 0.030 20.0 13.0 –

Stainless Steel 347 Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
347 515 205 40 92 201

Equivalent Grades for 347 Stainless Steel Nipple

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 347 1.4550 S34700 SUS 347 – 08Ch18N12B – X6CrNiNb18-10

Stainless Steel 347 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 347 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-27T17:42:20+05:30April 14th, 2021|

Stainless Steel 321 Nipple Manufactures In India

Sachiya Steel International is a well-known firm that manufactures and supplies a wide range of Stainless Steel 321 Nipple, which cannot be hardened by thermal treatment. Stainless Steel 321 Nipple is stabilized against chromium carbide formation by the addition of titanium. However, welded Stainless Steel 321H Nipple must never be used in highly oxidizing environments as it is liable to ‘Knife-line’ attack.

Characterized by high corrosion resistance in general atmospheric corrosive environments, SS 321 Hexagon Reducing Nipple exhibits excellent resistance to most oxidizing agents. This heat resistant grade of SS 321H Hexagon Nipple has a maximum dry air service temperature of 850 º C. Like other austenitic stainless steels, Alloy 321 One End Threaded Nipple works harden quickly and may require annealing after severe forming. Alloy 321H Both End Threaded Nipple is stabilized against weld heat affected zone (HAZ) inter-granular corrosion.

The titanium in this 321 Stainless Steel Nipple forms insoluble and stable carbide, which ties up all the carbon in the alloy and therefore prevents it from precipitating as chromium carbides. Our 321H Stainless Steel Nipple is readily welded by most standard processes and is very ductile and forms easily. This Grade 321 Concentric Swaged Nipple must be water quenched or fully annealed after working to re-attain maximum corrosion resistance. The following are some of the major applications of our Grade 321H Eccentric Swaged Nipple, such as aircraft exhaust stacks and manifolds.

Stainless Steel 321/321H Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 321/321H Nipple Chemical Composition

Grade C Mn Si P S Cr N Ni Ti
SS 321 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 5(C+N) – 0.70 max
SS 321H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 4(C+N) – 0.70 max

Stainless Steel 321/321H Nipple Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 321/321H Stainless Steel Nipple

STANDARD WERKSTOFF NR. UNS JIS EN
SS 321 1.4541 S32100 SUS 321 X6CrNiTi18-10
SS 321H 1.4878 S32109 SUS 321H X12CrNiTi18-9

Stainless Steel 321/321H Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 321/321H Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-29T12:25:13+05:30April 14th, 2021|

Stainless Steel 317L Nipple Manufacturers In India

Sachiya Steel International is one of the prominent dealer and trader of Stainless Steel 317L Nipple, which is used in the processing of mineral ores and concentrates. Reducing the impact of mining and quarrying on the landscape of Stainless Steel 317L Hexagon Reducing Nipple and on the environment is undoubtedly a key challenge facing the growing mining sector. Effective ore – processing practices and the efficient production of Stainless Steel 317L Hexagon Nipple can help to limit the environmental impact by reducing the volumes of material that have to be transported and processed by potentially hazardous thermal and chemical refining methods.

The strength of SS 317L One End Threaded Nipple, combined with its resistance to wear and corrosion, makes it a prime candidate for pumps, screens, filters, etc. An extensive program of cooking operations using household recipes has shown that, apart from aberrant values associated with new pans on first use of SS 317L Concentric Swaged Nipple, the contribution made by 19 % Cr / 9 % Ni stainless steel cooking utensils to chromium and nickel in the diet is negligible.

Stainless Steel 317L Eccentric Swaged Nipple is a highly durable material used in many qualified applications. Like all materials, the production of 317L Stainless Steel Nipple and use affect the environment in many different ways. As the family of alloys collectively known as SS 317L Nipple continues to expand, so do their potential applications throughout industry.

Stainless Steel 317L Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 317L Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 317L 0.035 max 2 max 1.00 max 0.045 max 0.030 max 18.00 – 20.00 3.00 – 4.00 11.00 – 15.00 57.89 min

Stainless Steel 317L Nipple Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 317L Stainless Steel Nipple

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 317L 1.4438 S31703 SUS 317L – – – X2CrNiMo18-15-4

Stainless Steel 317L Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 317L Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-30T12:32:31+05:30April 12th, 2021|

Stainless Steel 317 Nipple Manufacturers In India

Sachiya Steel International is one of the well-known exporting houses of high quality Stainless Steel 317 Nipple, which has excellent resistance to a wide variety of corrosive media. Stainless Steel 317 Hexagon Reducing Nipple has reasonable resistance to salt water in cold southern waters but is unlikely to be successful in warmer tropical waters.

Overall the corrosion resistance of Stainless Steel 317 Hexagon Nipple is approximately the same as or slightly below that of Grade 304. Performance of SS 317 One End Threaded Nipple is best with a smooth surface finish, in the hardened and tempered condition. Heat this Stainless Steel 317 Both End Threaded Nipple up to 980 Degree C – 1035 Degree C, followed by quenching in oil or air, where oil quenching is necessary for heavy sections.

Temper this Stainless Steel 317 Concentric Swaged Nipple at 150 Degree C – 370 Degree C to obtain a wide variety of hardness values and mechanical properties as indicated in the accompanying table. Stainless Steel 317 Eccentric Swaged Nipple resists scaling in intermittent service to 925 Degree C and in continuous service to 870 Degree C, but is generally not recommended for use in temperatures above the relevant tempering temperature, because of reduction in mechanical properties.

Welding of these 317 Stainless Steel Nipple is difficult due to the risk of cracking, where a pre – heat of 200 Degree C – 300 Degree C is recommended prior to welding.

Stainless Steel 317 Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 317 Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 317 0.08 max 2 max 1.0max 0.045 max 0.030 max 18 – 20 3.0-4.0 11.0-15.0 57.845 min

Stainless Steel 317 Nipple Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 317 Stainless Steel Nipple

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 317 1.4449 S31700 SUS 317

Stainless Steel 317 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 317 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-01-04T13:02:39+05:30April 12th, 2021|

Stainless Steel 316 Nipple Manufactures In India

Stainless Steel 316 Nipple Manufactures In India

Sachiya Steel International is one of the well-established producers for Stainless Steel 316 Nipple, which may be formed on equipment similar to carbon steel, and are readily blanked and pierced. Stainless Steel 316 Hexagon Reducing Nipple covers high – strength low – alloy shapes intended for riveted, bolted, or welded construction of bridges, or for other construction applications.

It is common to fabricate SS 316L Hexagon Nipple into many different shapes. Stainless Steel 316 One End Threaded Nipple has excellent malleability means they perform well in deep drawing, spinning, stretching and bending. Stainless Steel 316L Both End Threaded Nipple has a lower grade of wear resistant steel plate, which is an as – rolled product made to a chemistry to achieve a desired Brinell range.

Stainless Steel 316 Concentric Swaged Nipple is used in applications of slight abrasion where abrasion resistance combined with economy is the primary concern.

SS 316L Eccentric Swaged Nipple is a versatile general purpose stainless steel product with good resistance to atmospheric corrosion, many organic and inorganic chemicals, and to food and beverages.

Stainless Steel 316 Nipple is used when end product requires a lot of welding, which is further widely used in chemical processing plants. The combination of chromium, nickel, molybdenum, and copper make Stainless Steel 316L Nipple resistant in a range of sulphuric acid environments. Process environments that do not corrode Alloy 316 Nipple will not attack this grade.

Stainless Steel 316/316L Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 316/316L Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
316 min. – – – – 16.0 2.0-3.0 10.0 –
max. 0.035 2.0 0.75 0.045 0.030 18.0 14.0 –
316L min. – – – – – 16.0 2.0-3.0 10.0 –
max. 0.035 2.0 0.75 0.045 0.030 18.0 14.0 –

Stainless Steel 316/316L Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
316 515 205 40 95 217
316L 485 170 40 95 217

Equivalent Grades for 316/316L Stainless Steel Nipple

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 – Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L 1.4404 / 1.4435 S31603 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3

Stainless Steel 316/316L Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 316/316L Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-22T19:31:44+05:30April 9th, 2021|

Stainless Steel 310H Nipple Manufacturers In India

Stainless Steel 310H Nipple Manufacturers In India

Sachiya Steel International is one of the well-established trader & dealer of high quality Stainless Steel 310H Nipple, which is the material that is often good conductor of electricity and heat. Surface of this Stainless Steel 310H Hexagon Reducing Nipple can be smooth with bluish glow, which further has all the properties that can be defined as metal.

Our Stainless Steel 310H Hexagon Nipple corrode easily, while others form a protective oxide layer as well as the semi – metals. This Stainless Steel 310H One End Threaded Nipple is not a pure chemical element, but it is an alloy of two or more other chemical elements, therefore it cannot be defined as a metal, neither added to the periodic table of elements. Besides, our Stainless Steel 310H Both End Threaded Nipple contains carbon and other non – metallic impurities which also exclude it from the group of metals.

This Stainless Steel 310H Concentric Swaged Nipple has carbon content and is a preferred choice for high temperature applications. Our SS 310H Eccentric Swaged Nipple has good resistance to oxidation at temperatures of up to 1040 Degree C (1904 Degree F) in intermittent service and 1150 Degree C (2102 Degree F) in continuous service. This 310H Stainless Steel Nipple is widely used in environments where Sulphur dioxide gas is present at high temperatures. The lower carbon content of Grade 310S Nipple does reduce its high temperature strength compared to our Grade 310H Nipple.

Stainless Steel 310H Nipple Specification
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 310H Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
310H min. 0.04 – – – – 24.0 – 19.0 –
max. 0.10 2.0 1.00 0.045 0.03 26.0 21.0 –

Stainless Steel 310H Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
310H 515 205 40 95 217

Equivalent Grades for 310H Stainless Steel Nipple

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
310H S31009 – – – – – –

Stainless Steel 310H Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 310H Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-03-13T16:44:49+05:30April 9th, 2021|

Stainless Steel 310 Nipple Manufacturers In India

Stainless Steel 310 Nipple Manufacturers In India

Sachiya Steel International is one of the well-established distributors for high quality Stainless Steel 310 Nipple, which is made to gone through various quality checks and is trimmed at edges. The rolling mill technology was the only technique used to manufacture Stainless Steel 310 Hexagon Reducing Nipple for industrial purpose. The rolled strips of SS 310S Hexagon Nipple were formed into a circular cross section with the help of funnel rolls.

The lap welding was then done on Stainless Steel 310 One End Threaded Nipple through the forge welding process. Stainless Steel 310S Both End Threaded Nipple is manufactured with continuous tube mill using multi – torch tungsten Inert gas. The filler metal or forge welding process is not used in Stainless Steel 310 Concentric Swaged Nipple, which are then fed to the tubes mill by us.

Stainless Steel 310S Eccentric Swaged Nipple is passed through the number of rollers as per the required size. In the tubes-mill, this Stainless Steel 310 Nipple is gradually converted into the tubular shape. The fitted welding machine is then used to weld trim edges of SS 310S Nipple using TIG welding process. The scraps and inside weld bead of 310 Stainless Steel Nipple are removed instantaneously by the machine. 310S Stainless Steel Nipple is cut to the required lengths depending upon the industrial demand, which is then subjected to cleaning to remove the dirt.

Stainless Steel 310 Nipple 
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 310/310S Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 310 0.015 max 2 max 0.015 max 0.020 max 0.015 max 24.00 – 26.00 0.10 max 19.00 – 21.00 54.7 min
SS 310S 0.08 max 2 max 1.00 max 0.045 max 0.030 max 24.00 – 26.00 0.75 max 19.00 – 21.00 53.095 min

Stainless Steel 310/310S Nipple Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %

Equivalent Grades for 310/310S Stainless Steel Nipple

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 – X15CrNi25-20
SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18 – X8CrNi25-21

Stainless Steel 310 Nipple

Stainless Steel 310/310S Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 310/310S Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-03-27T18:10:03+05:30April 7th, 2021|

Stainless Steel 304H Nipple Manufactures In India

Stainless Steel 304H Nipple Manufactures In India

Sachiya Steel International is one of the reputed exporter & supplier of Stainless Steel 304H Nipple, which has carbon content and is a preferred choice for high temperature applications. Stainless Steel 304H Hexagon Reducing Nipple has good resistance to oxidation at temperatures of up to 1040 Degree C (1904 Degree F) in intermittent service and 1150 Degree C (2102 Degree F) in continuous service.

Stainless Steel 304H Hexagon Nipple is widely used in environments where Sulphur dioxide gas is present at high temperatures. However SS 304H One End Threaded Nipple is recommended that this steel should not be continuously used at 425 Degree C – 860 Degree C (797 Degree F – 1580 Degree F) range due to carbide precipitation. Stainless Steel 304H Both End Threaded Nipple does not perform in reducing, nitriding or carburizing atmospheres, but it does outperform most heat resistant stainless steels in these conditions.

Stainless Steel 304H Nipple

Stainless Steel 304H Concentric Swaged Nipple is prone to inter – granular corrosion after long term exposure at high temperatures. However, due to its high chromium content, Stainless Steel 304H Eccentric Swaged Nipple is more corrosion resistant than most heat resistant alloys. 304H Stainless Steel Nipple is quite ductile and forms in a manner very similar to 316, where good characteristics suited to all standard methods and generally recommended for fusion welding. When heated between 1202 Degree F – 1742 Degree F (650 Degree C – 950 Degree C), Grade 304H Nipple is subject to sigma phase precipitation.

Stainless Steel 304H Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 304H Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
304H min. 0.04 – – – – 18.0 – 8.0 –
max. 0.010 2.0 0.75 0.045 0.030 20.0 10.5 –

Stainless Steel 304H Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304H 515 205 40 92 201

Equivalent Grades for 304H Stainless Steel Nipple

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304H S30409 – – 1.4301 – – –

Stainless Steel 304H Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 304H Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-06T15:32:58+05:30April 7th, 2021|

Stainless Steel 304L Nipple Manufactures In India

Stainless Steel 304L Nipple Manufactures In India

Sachiya Steel International is one of the pioneer supplier and trader of Stainless Steel 304L Nipple, which are used because they are not sensitive to inter – granular corrosion after heating within the carbide precipitation range of 425 Degree C – 850 Degree C. A limitation with Stainless Steel 304L Hexagon Reducing Nipple is that titanium does not transfer well across a high temperature arc, so is not recommended as a welding consumable.

In general, Stainless Steel 304L Hexagon Nipple is referred as alloy steel when content of Manganese – 1.65 %, Silicon – 0.6 % & copper 0.6 % exceeds the limit. Stainless Steel 304L One End Threaded Nipple is the grade of choice for applications in the temperature range of up to about 900 Degree C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion.

Stainless Steel 304L Nipple

Elements with a lower percentage i.e. less than 5 % are added to increase the strength and harden ability of SS 304L Both End Threaded Nipple, whereas in larger percentage to achieve special properties like corrosion resistance, high temperature sustainability, and high yield and impact results. Stainless Steel 304L Concentric Swaged Nipple is heat resistant, titanium stabilized, austenitic alloy that’s commonly used for service in the 1000 Degree F – 1600 Degree F temperature range. SS 304L Eccentric Swaged Nipple is primarily used in applications that involve continuous and intermittent service temperatures within the carbide precipitation range of 800 Degree F – 1500 Degree F.

Specification Of Stainless Steel 304L Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 304L Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
304L min. – – – – – 18.0 – 8.00 –
max. 0.030 2.0 0.75 0.045 0.030 20.0 12.00 0.10

Stainless Steel 304L Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304L 485 170 40 92 201

Equivalent Grades for 304L Stainless Steel Nipple

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304L S30403 304S31 58E 1.4306 / 1.4307 X5CrNi18-10 2332 SUS 304L

Stainless Steel 304L Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 304L Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-05T18:41:09+05:30April 5th, 2021|

Stainless Steel 304 Nipple Manufactures In India

Stainless Steel 304 Nipple Manufactures In India

Sachiya Steel International is one of the renowned producer & wholesaler of Stainless Steel 304 Nipple, which is the standard molybdenum – bearing grade and second in importance to 316 amongst the austenitic stainless steels. Stainless Steel 304 Hexagon Reducing Nipple is the low carbon version of 316 and is immune from sensitization (grain boundary carbide precipitation); as a result, it is extensively used in heavy gauge welded components.

Stainless Steel 304 Hexagon Nipple is usually regarded as the standard “marine grade stainless steel”, but it is not resistant to warm sea water. Stainless Steel 304 One End Threaded Nipple has good oxidation resistance in intermittent service to 870 Degree C and in continuous service to 925 Degree C. Continuous use of Stainless Steel 304 Both End Threaded Nipple in the 425 Degree C – 860 Degree C range is not recommended if subsequent aqueous corrosion resistance is important. In many marine environments, Stainless Steel 304 Concentric Swaged Nipple does exhibit surface corrosion, usually visible as brown staining.

Stainless Steel 304 Nipple

Stainless Steel 304 Eccentric Swaged Nipple, with its higher carbon content has application at elevated temperatures. The molybdenum gives 304 Stainless Steel Nipple better overall corrosion resistant properties, particularly higher resistance to pitting and crevice corrosion in chloride environments. Alloy 304 Nipple has excellent forming and welding characteristics, which is particularly associated with crevices and rough surface finish. The austenitic structure also gives Grade 304 Nipple excellent toughness, even down to cryogenic temperatures.

Stainless Steel 304 Nipple Specification
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 304 Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
304 min. – – – – – 18.0 – 8.0 –
max. 0.08 2.0 0.75 0.045 0.030 20.0 10.5 0.10

Stainless Steel 304 Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304 515 205 40 92 201

Equivalent Grades for 304 Stainless Steel Nipple

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304 S30400 304S31 58E 1.4301 X5CrNi18-10 2332 SUS 304

Stainless Steel 304 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 304 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing


We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-08T13:06:36+05:30April 5th, 2021|
LOGO 1200 X 300

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top