LOGO 1200 X 300

Fasteners

Alloy 17-4 PH Nuts Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy 17-4 PH Nuts And  Bolts, where short – time and low – temperature heat treatments minimize distortion and scaling. Typical usage of Alloy 17-4 PH Hex Head Bolts is seen in applications requiring high strength and a modest level of corrosion resistance. These Alloy 17-4 PH Hex Head Nuts can be heat treated to high levels of strength and hardness, and features corrosion resistance and machinability comparable to austenitic 304 stainless. The valuable combination of high strength, good corrosion resistance and toughness in Alloy 17-4 PH Hex Head Nuts over both base metals and welds gives designers opportunities to add reliability to their products while simplifying fabrication and often reducing costs.

Alloy 17-4 PH Nuts Manufacturer

To increase their yield strength, these Alloy 17-4 PH Square Bolts are subjected to heat treatment during precipitation hardening (PH) or age hardening. High strength of Alloy 17-4 PH Square Nuts is maintained to approximately 600 degrees Fahrenheit (316 degrees Celsius). These Alloy 17-4 PH Eye Bolts has adequate resistance to atmospheric corrosion or in diluted acid salts where its corrosion resistance is equivalent to Alloy 304 or Alloy 430.

Alloy 17-4 PH Eye Nuts combines high strength, hardness (up to 572 Degree F / 300 Degree C), and corrosion resistance. Known for its’ corrosion resistance characteristics, the different shapes and finishes of these Alloy 17-4 PH T-Bolts make the composition suitable for a wide variety of environments.

17-4ph Bolt/Nut Specifications
Specifications : ASTM A 479 ASME SA 479
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

SS 17-4ph Bolt/Nut Chemical Composition

SS 17-4ph Ni C Mo Mn Si S Cr
3.00 – 5.00 0.07 0.60 1.50 0.70 0.015 15.0 – 17.0

SS 17-4ph Bolt/Nut Mechanical Properties

Density Melting Point Yield Strength (PSI)
 Tensile Strength (PSI) Elongation
7.8
 1425 °C
 170 190 10 %

17-4ph Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

17-4ph Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 104/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 104 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 104/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 104 3.1 and EN 104 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-05T15:36:04+05:30February 11th, 2022|Fasteners|

Stainless Steel 316Ti Nuts Manufacturers In India

Stainless Steel 316Ti Nuts Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 316Ti Nuts And Bolts, which exhibits excellent resistance in a variety of atmospheres and temperatures, along with the corrosion and oxidation that occurs over time. Stainless Steel 316Ti Hex Head Bolts is often applied in areas of higher temperatures than Type 304 can endure, and its low carbon allows it to be resistant against carbon precipitation. However, like many stainless steels, Stainless Steel 316Ti Hex Head Nuts is susceptible to warm chlorine environments and can potential pit and crack.

Stainless Steel 316Ti Nuts

This utilized the widely applicable properties of Stainless Steel 316Ti Square Bolts and meets the individual specifications for each. Additionally, the lower amount of carbon in its composition gives Stainless Steel 316Ti Square Nuts utilization in areas where high temperature gases may pose a problem. As such, Stainless Steel 316Ti Eye Bolts is commonly applied in the manufacturing of furnaces, exhaust systems and containers exposed to high temperatures.

Stainless Steel 316Ti Eye Nuts is additionally characterized by its resistance to oxidation and creep, along with its ability to withstand high temperatures. Moist environments have no effect on Stainless Steel 316Ti U-Bolts, due to the higher levels of nickel and chromium in its makeup. Because of this, Stainless Steel 316Ti Wing Nuts is often utilized in marine environments in place of Stainless Steel 304, as it displays a higher resistance.

Stainless Steel 316Ti Nuts/Bolts Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

316Ti Stainless Steel Bolt/Nut Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
316Ti min. – – – – – 16.0 2.00 10.0 –
max. 0.08 2.0 0.75 0.045 0.030 18.0 3.00 14.0 –

Stainless Steel 316Ti Bolt/Nut Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
316Ti 515 205 35 75 205

Stainless Steel 316Ti Bolt/Nut Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
316Ti 8000 193 17.2 17.8 18.4 16.2 21.5 500 720

Equivalent Grades for 316Ti Stainless Steel Bolt/Nut

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
316Ti S31635 320S31 X6CrNiMoTi17-12-2 1.4571 Z6CNDT17‐12 08Ch17N13M2T SUS 316Ti

SS 316Ti Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

316Ti Steel Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2025-01-09T15:01:15+05:30February 3rd, 2022|Fasteners|

Stainless Steel 316 Nuts Manufacturers In India

Stainless Steel 316 Nuts Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 316 Nuts And Bolts, which is being offered at affordable rates and in customized options for our esteemed clients. The welded corners of Stainless Steel 316 Hex Head Bolts typically rust whereas the bulk of the exposed stainless is untouched. Stainless Steel 316L Hex Head Nuts has lower carbon such that when welded the chromium carbide that forms does not deplete the chromium to the point where the corrosion of the stainless is deleteriously impacted.

Stainless Steel 316 Nuts

There does not seem to be a clear reason for this in Stainless Steel 316 Square Bolts and the differences are probably associated with the lower strength of the low carbon type. The low carbon type in Stainless Steel 316L Square Nuts may be easier to shape and form, which in turn may also affect the levels of residual stress left the steel after is forming and fitting up for welding.

This may result in the ‘standard’ types of Stainless Steel 316 Eye Bolts needing more force to hold them in position once fitted – up for welding, with more of a tendency to spring – back if not properly held in place. The welding consumables for Stainless Steel 316L Eye Nuts are based on a low carbon composition, to avoid inter – crystalline corrosion risk in the solidified weld nugget or from the diffusion of carbon into the parent (surrounding) metal.

Stainless Steel 316 Nuts/ Bolts Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

SS 316/316L Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

316/316L Steel Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2025-01-09T13:12:39+05:30February 3rd, 2022|Fasteners|

Nickel Alloy 200 Bolts Manufacturers In India

Nickel Alloy 200 Bolts Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Bolts And Nuts, which is the higher carbon (0.04 – 0.10) version of the alloy. These Nickel 200 Hex Head Bolts has slightly improved corrosion resistance over stainless steel in strongly oxidizing environments. Nickel 200 Hex Head Nuts is also advantageous for high temperature service because of its good mechanical properties. These Nickel 200 Square Bolts offers higher creep and stress rupture properties than Alloy 304 and, particularly might also be considered for exposures where sensitization and inter – granular corrosion are concerns.

Nickel Alloy 200 Bolts

Nickel 200 Square Nuts is a columbium (niobium) / tantalum stabilized austenitic chromium-nickel stainless steel which was developed to provide an 18 – 8 type alloy with improved inter – granular-corrosion resistance. These Nickel 200 Eye Bolts has a slightly improved corrosion resistance over other alloys of stainless steel in strongly oxidizing environments as a result of the addition of columbium (niobium) and tantalum.

Nickel 200 Eye Nuts was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C). In most instances, the carbon content of these Nickel 200 T-Bolts enables dual certification. Nickel 200 T-Nuts does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid. These Nickel 200 U-Bolts can be easily welded and processed by standard shop fabrication practices.

Nickel Alloy 200 Bolts/Nuts Specifications
Specifications : ASTM B 160 ASME SB 160
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

200 Nickel Alloy Bolt/Nut Chemical Composition

Nickel 200 Ni C Mo Mn Si Fe P S Cu Cr
99.0 min 0.15 max – 0.35 max 0.1 max 0.4 max – 0.01 max 0.25 max –

Nickel Alloy 200 Bolt/Nut Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 21500 , MPa – 148 Psi – 67000 , MPa – 462 45 %

Equivalent Grades for 200 Nickel Bolt/Nut

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Nickel 200 N02200 2.4066 N-100M Ni 99.2 NW 2200 NA 11 НП-2

Alloy 200 Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

200 Nickel Alloy Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2025-01-08T16:35:00+05:30January 25th, 2022|Fasteners|

Monel Alloy K500 Bolts Manufacturers In India

Monel Alloy K500 Bolts Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Bolts And Nuts, which are also used in domestic, professional or industrial areas. The alloying elements in Monel K500 Hex Head Bolts tend to form either solid solutions or compounds or carbides. Alloying elements in Monel K500 Hex Head Nuts also have an effect on the eutectoid temperature of the steel. Manganese and nickel in Monel K500 Square Bolts lower the eutectoid temperature and are known as austenite stabilizing elements. With enough of these elements, the austenitic structure of Monel K500 Square Nuts may be obtained at room temperature. Carbide – forming elements in Monel K500 Eye Bolts raise the eutectoid temperature, where these elements are known as ferrite stabilizing elements.

Monel Alloy K500 Bolts

Deposition of complex and heavy organic compounds of our Monel K500 Eye Nuts in crude and heavy oil can cause a number of severe problems up to pipeline blocking. Monel K500 T-Bolts are developed for energy – related applications involving oil & gas drilling and therefore are subjected to stresses in machine parts.

The specification of our Monel K500 T-Nuts covers nominal wall and minimum wall seamless ferritic alloy – steel pipe intended for high temperature service. Monel K500 U-Bolts are often specified when high strength is needed in moderate – to – large sections. Our Monel K500 Lock Nuts is heavily cold worked material, however, can have tensile strengths.

Monel Alloy K500 Bolts/Nuts Specifications
Specifications : ASTM B 865-04 ASME SB 865-04
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

K500 Monel Alloy Bolt/Nut Chemical Composition

Monel K500 Ni C Al Mn Si Fe Cu S Ti Cr
63.0 min 0.25 max 2.3 – 3.15 1.5 max 0.5 max 05 – 2 27.0 – 33.0 0.010 max 0.35 – 0.85 –

Monel Alloy K500 Bolt/Nut Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.44 g/cm3 1350 °C (2460 °F) Psi – 1,15,000 , MPa – 790 Psi – 1,60,000 , MPa – 1100 20 %

Equivalent Grades for K500 Monel Bolt/Nut

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Monel K500 N05500 2.4375 – – – – –

Alloy K500 Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

K500 Monel Alloy Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2025-01-08T16:21:18+05:30January 25th, 2022|Fasteners|

Hastelloy B3 Bolts Manufacturers In India

Hastelloy B3 Bolts Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy B3 Bolts, where chromium plays a dominant role in reacting with oxygen to form this corrosion product film. Our Hastelloy B3 Hex Head Screws exhibits very soaring resistance to hydrobromic, sulfuric acids and pure hydrochloric. Hastelloy B3 Socket Head Cap Screws is used in furnace, aircraft, chemical process parts, gas turbine combustion unit and honeycombs components. Our Hastelloy B3 Socket Set Screws is Molybdenum – Nickel alloy that offers outstanding resistance to hydrochloric acid at all temperatures and applications from ambient to elevate.

Hastelloy B3 Bolts

Meanwhile, these Hastelloy B3 Anchors Screws (UNS N10675) is an added member of the molybdenum – nickel family of alloys by means of outstanding resistance to hydrochloric acid at all temperatures and concentrations. Meanwhile, these Hastelloy B3 Blind Rivet Screws are also being offered in customized sizes and shapes to our customers. We also offer these Hastelloy B3 Concrete Screws at best possible rates.

Hastelloy B3 Threaded Screws contains iron, chromium, manganese, silicon, carbon and, in many cases, significant amounts of nickel and molybdenum. These elements in Hastelloy B3 Steel Shoulder Screws react with oxygen from water and air to form a very thin, stable film that consists of such corrosion products as metal oxides and hydroxides. Our Hastelloy B3 Panel Screws is the lower carbon version of SS 316 and is immune from sensitization.

Hastelloy B3 Bolts/Nuts Specifications
Specifications : ASTM B 335 ASME SB 335
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

B3 Hastelloy Alloy Bolt/Nut Chemical Composition

Hastelloy B3 Ni C Mo Mn Si Fe Cu Ti Co Cr
65.0 min 0.01 max 28.5 3.0 max 0.10 max 1.5 0.20 max 0.2 max 3.0 max 1.5

Equivalent Grades for B3 Hastelloy Bolt/Nut

STANDARD UNS WERKSTOFF NR.
Hastelloy B3 N010675 2.4600

Alloy B3 Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

B3 Hastelloy Alloy Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2025-01-08T12:51:19+05:30January 22nd, 2022|Fasteners|

Hastelloy B2 Bolts Manufacturers In India

Hastelloy B2 Bolts Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy B2 Bolts to the esteemed clients, which can also be used in acetic and phosphoric acids. Hastelloy B2 Hex Head Screws is used for most chemical method uses in the welded form. Hastelloy B2 Socket Head Cap Screws has resistant to pitting and stress corrosion cracking. Hastelloy B2 Socket Set Screws has outstanding resistance to all concentrations and temperatures of hydrochloric acid. Hastelloy B2 Anchors Screws has suggestively lower silicon, iron and carbon compared to its’ forerunner, Alloy B (UNS N10001), making the alloy less vulnerable to lessened corrosion resistance in the weld area, in the as – welded form.

Hastelloy B2 Bolts

Hastelloy B2 Blind Rivet Screws (UNS N10665) has immense resistance to SCC and resistance to pitting. Meanwhile, these Hastelloy B2 Concrete Screws are also being offered in customized sizes and shapes to our customers. We also offer these Hastelloy B2 Threaded Screws in best possible rates. Hastelloy B2 Steel Shoulder Screws are known throughout the chemical process industry as the premier corrosion resistant materials.

High – temperature alloys such as Hastelloy B2 Panel Screws are equally well known in the aerospace field for their unique heat – resistance qualities. Optimum corrosion resistance can be obtained only if Hastelloy B2 Machine Screws is in the correct metallurgical condition and exhibits a clean structure. Samples of Hastelloy B2 Screws are readily available for laboratory or in – plant corrosion testing.

Alloy B2 Bolt/Nut Specifications
Specifications : ASTM B 335 ASME SB 335
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

B2 Hastelloy Alloy Bolt/Nut Chemical Composition

Hastelloy B2 Ni C Mo Mn Si Fe P S Co Cr
Balance 0.02 max 26.0-30.0 1.0 max 0.10 max 2.0 max 0.040 max 0.030 max 1.0 max 1.0 max

Hastelloy Alloy B2 Bolt/Nut Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
9.2 g/cm3 1370 °C (2500 °F) Psi – 51,000, MPa – 350 Psi -1,10,000, MPa -760 40 %

Equivalent Grades for B2 Hastelloy Bolt/Nut

STANDARD UNS WERKSTOFF NR.
Hastelloy B2 N10665 2.4617

Alloy B2 Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

B2 Hastelloy Alloy Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2025-01-08T12:49:44+05:30January 22nd, 2022|Fasteners|

Alloy Steel 2HM Bolts Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy Steel 2HM Bolts And Nuts, which are offered in various specifications of sizes. The type of carbide that chromium forms depends on the amount of carbon and other types of alloying elements in Alloy Steel Grade 2HM Hex Head Bolts are present. We offer Alloy Steel Grade 2HM Hex Head Nuts are in various specifications in order to meet the diversified requirements of the customers. For the manufacturing of Alloy Steel Grade 2HM Square Bolts, we make use of optimum quality stainless steel and inoculate contemporary technology.

Alloy Steel 2HM Bolts

We offer Alloy Steel Grade 2HM Square Nuts at highly competitive prices and deliver consignment within stipulated time. Alloy Steel Grade 2HM Eye Bolts is often used in solar heaters – geysers, radiator fins, water distribution systems, heat exchangers, cooling towers, chilled water machines, fuel oil systems and non- flammable medical gas systems. Before the final dispatch, our offered Alloy Steel Grade 2HM Eye Nuts are rigorously inspected on certain quality parameters.

The offered Alloy Steel Grade 2HM T-Bolts are processed by using premium quality steel and other allied material for meeting various existing industrial quality norms. Alloy Steel Grade 2HM T-Nuts are checked in diverse quality parameters so as to deliver a defect free range. Alloy Steel Grade 2HM Hex Bolts offered by Sachiya Steel International is from prime manufacturers & has zero rejections.

Alloy Steel 2HM Bolt/Nut Specifications
Specifications : ASTM A 194 ASME SA 194
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 2HM mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

2HM Alloy Steel Bolt/Nut Chemical Composition

Alloy Steel 2 C Mn P S Si Ni Cr
0.40% min 1.00% max 0.040% 0.050% 0.40% max – –

Mechanical Properties

Specification Material Nominal Size, In. Tempering Temp. °F Proof Load Stress, ksi Hardness Rockwell See Note
Min Max
ASTM A194 Grade 2HM Medium Carbon Steel, Quenched and Tempered 1/4 – 4 1000 150 159 237 1,

Alloy Steel 2HM Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

2HM Alloy Steel Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-05T10:52:47+05:30January 18th, 2022|Fasteners|

Alloy Steel 2 Bolts Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy Steel 2 Bolts And Nuts, where the alloying elements tend to form either solid solutions or compounds or carbides. Our organization is engaged in this domain, we are offering an excellent quality Alloy Steel Grade 2 Hex Head Bolts, which are manufactured in line with international standards utilizing superior quality material & contemporary techniques. Our range of Alloy Steel Grade 2 Hex Head Nuts is offered in different sizes, where we also provide customization as per the requirements of clients. Alloy Steel Grade 2 Square Bolts are very durable and rust proof and are offered as per the needs of our clients.

Alloy Steel 2 Bolts

We supply a wide range of precisely engineered Alloy Steel Grade 2 Square Nuts, which are being made in compliance with international quality and safety standards. Having features like durability and corrosion resistance, Alloy Steel Grade 2 Eye Bolts are widely used for various applications in electrolytic applications, electrical engineering components, panel boards, and so on.

Our precious clients can avail from us a wide gamut of a premium quality Alloy Steel Grade 2 Eye Nuts, which is designed using sophisticated machines and modern technology in compliance with international quality standards. Our range of Alloy Steel Grade 2 T-Bolts is manufactured as per the industrial standards and is provided to our clients in customized sizes and specifications as per the varied needs and requirements of our clients.

Alloy Steel 2 Bolt/Nut Specifications
Specifications : ASTM A 194 ASME SA 194
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 2 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

2 Alloy Steel Bolt/Nut Chemical Composition

Alloy Steel 2 C Mn P S Si Ni Cr
0.40% min 1.00% max 0.040% 0.050% 0.40% max – –

Alloy Steel 2 Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

2 Alloy Steel Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-05T10:56:50+05:30January 18th, 2022|Fasteners|

Alloy Steel B16 Bolts Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy Steel B16 Bolts And Nuts, which has some of the excellent features to offer such as High strength, Rugged design, Impact & heat resistance and more. Sulfur (in the form of manganese sulfide) lead, bismuth, selenium, and tellurium in Alloy Steel Grade B16 Hex Head Bolts increase machinability. We are one of the leading manufacturers of a wide range of Alloy Steel Grade B16 Hex Head Nuts that are fabricated using superior quality raw material in compliance with set industrial standards. We are engaged in offering a wide range of Alloy Steel Grade B16 Square Bolts, which are offered in specified shapes and sizes, and also are made up of qualitative material.

Alloy Steel B16 Bolts

We offer our clients with non – ferrous and ferrous metal Alloy Steel Grade B16 Square Nuts that are widely appreciated for their strength and durability. Available in different dimensions & grades, Alloy Steel Grade B16 Eye Bolts are widely used in different industries like power, engineering, construction and many more.

Alloy Steel Grade B16 Eye Nuts are often used in Condenser Plates, Hot Forgings, Hinges, Rivets, Pins, Heat Exchangers, Condenser Tubing, Radiator Tanks and Cores. Our precious clients can avail from us a wide gamut of a premium quality Alloy Steel Grade B16 T-Bolts, which is designed using sophisticated machines and modern technology in compliance with international quality standards.

Alloy Steel B16 Bolt/Nut Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to B16 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

B16 Alloy Steel Bolt/Nut Chemical Composition

Alloy Steel B16 C Mn P S Si Ni Cr
0.15 max 1.00 max 0.040 0.030 1.00 max – 11.50-13.50

Physical Properties

Dia Minimum
Temperature
° F (°C)		 Tensile
Strength
min, ksi
( MPa)		 Yield
Strength. min,
0.2% offset, Ksi
( MPa)		 Elongation in
4D
min %		 Reduction of
Area
min %		 Hardness
max
2 1/2″ and under 1200(650) 125(860) 105(725) 18 50 321HB
or 35 HRC
over
21/2″ to 4″		 1200(650) 110(760) 95(655) 17 45 302HB
or 33 HRC
over 4″ to
7″		 1200(650 ) 100(690) 85(586) 16 45 227HB
or 29 HRC

Mechanical Properties

Grade Size Tensile ksi, min Yield, ksi, min Elong, %, min RA % min
B16 Up to 2-1/2 125 105 18 50
2-5/8 – 4 110 95 17 45
4-1/8 – 7 100 85 16 45

Alloy Steel B16 Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

B16 Alloy Steel Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-05T11:01:22+05:30January 18th, 2022|Fasteners|
LOGO 1200 X 300

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2025 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top