LOGO 1200 X 300

Buttweld Fittings

Inconel 600 Buttweld Fittings Manufacturers In India

Inconel 600 Buttweld Fittings Manufacturers In India

Sachiya Steel International offers a wide range of Inconel 600 Buttweld Fittings, which are known for its good resistance to pressure and temperature. Inconel 600 Elbow (UNS N06600) has excellent mechanical properties and Good Oxidation Resistance. Inconel 600 Long Radius Elbow Pipe Fittings has both hot and cold workability and resistance to ordinary forms of corrosion. Inconel 600 Short Radius Elbow Pipe Fittings is used in a variety of corrosion resisting applications and long been used in the heat treating industry for many of the same applications as Inconel RA330 Bends.

Inconel 600 Concentric Reducer has excellent resistance to chloride – ion stress – corrosion cracking and also displays good heat resistance. Inconel 600 Eccentric Reducer Pipe Fittings is a nickel – chromium alloy with good oxidation resistance at higher temperatures, with good resistance in carburizing and chloride containing environments. Inconel 600 Equal Tee Pipe Fittings is a nonmagnetic and nickel-based high temperature alloy possessing an excellent combination of high strength, hot and cold workability, and resistance to ordinary form of corrosion.

Inconel 600 Buttweld Fittings

Inconel 600 Unequal Tee Pipe Fittings has Good Corrosion Resistance at High Temperatures and is also used at High temperature static applications. Inconel 600 Lateral Tee Pipe Fittings is a standard engineering material for applications which require resistance to corrosion and heat. Meanwhile, these Inconel 600 Cross Pipe Fittings are also being offered in different sizes and shapes to our customers.

Inconel 600 Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

Inconel 600 Pipe Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Inconel 600 0.15 max 1.00 max 0.50 max 0.015max 0.50 max 6.00 – 10.00 72.00 min 14.00 – 17.00

Inconel 600 Buttweld Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 600 8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %

Equivalent Grades for 600 Inconel Pipe Fitting

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 600 2.4816 N06600 NCF 600 NA 13 МНЖМц 28-2,5-1,5 NC15FE11M NiCr15Fe

Inconel Alloy 600 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Inconel 600 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-08T14:56:31+05:30August 2nd, 2021|

AISI 4130 Buttweld Fittings Manufacturers In India

AISI 4130 Buttweld Fittings Manufacturer In India 

Sachiya Steel International offers a wide array of AISI 4130 Buttweld Fittings, where owing to its durability, efficiency and dimensional precision, these provided products are highly acclaimed and demanded. Our range of these AISI 4130 Elbow Butt Weld Pipe Fittings combines excellent corrosion resistance property of nickel and copper by means of added advantage of greater strength.

We procure and supply wide assortment of these AISI 4130 Tee Butt Weld Pipe Fittings that are manufactured from qualitative raw material by our trusted experts. Being the reckoned names in the industry, we offer functionally advance the array of our AISI 4130 Cross Butt Weld Pipe Fittings that are manufactured with accuracy. These AISI 4130 Reducer Butt Weld Pipe Fittings has a number of best features to offer such as Perfect composition, No added impurity, Assured life, Durable, Efficiently delivered, Cost effective, and more. Meanwhile, our AISI 4130 pipe Bend are as well being offered in customized sizes and shapes to our customers.

These AISI 4130 Stub End Butt Weld Pipe Fittings combines excellent corrosion resistance with elevated mechanical properties and relatively easy fabrication. Our AISI 4130 End Pipe Cap is composed of carbon, chromium, copper, iron, manganese, molybdenum, nickel, phosphorous, silicon, and sulfur. These AISI 4130 Dish Cap Butt Weld Pipe Fittings is an excellent option when chloride stress corrosion cracking is an issue and resists pitting and crevice corrosion.

AISI 4130 Pipe Fittings Specifications
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

AISI 4130 Pipe Fittings Chemical Composition

AISI 4130 Ni C Mo Mn Si Fe Cu S P Cr
0.50 max 0.28-0.33 0.15-0.25 0.40-0.60 0.15-0.35 97.3-98.22 – 0.025 MAX 0.035 MAX 0.80-1.10

AISI 4130 Buttweld Fittings Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
0.28 2580 460 MPa 560 MPa 20 %

Equivalent Grades for AISI 4130 Pipe Fitting

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
AISI 4130 G41300 1.7218 – 25CrMo4 JIS G4105 BS 970 –

AISI 4130 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

AISI 4130 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-30T11:50:42+05:30August 2nd, 2021|

SMO 254 Buttweld Fittings Manufacturer In India

Sachiya Steel International offers a wide array of SMO 254 Buttweld Fittings, which has some excellent features to offer such as durable, long functional life, reliable performance, and more. With high levels of chromium, molybdenum, and nitrogen, SMO 254 Elbow Butt Weld Pipe Fittings (UNS S31254) suited for high chloride environments such as brackish water seawater pulp mill bleach plants and other high chloride process streams. Some common applications of SMO 254 Tee Butt Weld Pipe Fittings are off shore, marine environment and within chemical industry.

SMO 254 Cross Butt Weld Pipe Fittings demonstrates outstanding resistance to pitting, crevice corrosion stress cracking, and corrosion fatigue uniform corrosion. Meanwhile, these SMO 254 Reducer are also being offered in different sizes and shapes to our customers. SMO 254 Bend Pipe Fittings is used for a variety of household and industrial applications such as screws, machinery parts, car headers, and food – handling equipment. SMO 254 Stub End Butt Weld Pipe Fittings are also used in the architectural field for exterior accents such as water and fire features.

SMO 254 End Cap Butt Weld Pipe Fittings contains both chromium (usually 18 %) and nickel (usually 8 %) metals as the main non – iron constituents. The basic idea of these SMO 254 Pipe Cap is to produce a chemical composition that leads to an approximately equal mixture of ferrite and austenite.

SMO 254 Pipe Fittings Specifications
Specifications : ASTM A403 / ASME SA403
Size : 3/4″ – 12″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80 etc.
Type : Seamless / Welded / Fabricated

SMO 254 Pipe Fittings Chemical Composition

SMO 254 Ni C Mo Mn Si Fe Cu S P Cr
17.5 – 18.5
 0.02 max 6 – 6.5
 1 max 0.8 max – 0.5 – 1 0.01 max 0.03 max 19.5 – 20.5

SMO 254 Buttweld Fittings Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.0 g/cm3 1320-1390 ℃ 300 650 35 %

Equivalent Grades for SMO 254 Pipe Fitting

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS SIS GOST
SMO 254 S31254 1.4547 Z1 CNDU 20.18.06Az X1CrNiMoCuN20-18-7 – 2378 –

SMO 254 Buttweld Pipe Fittings Application Industries

Off-Shore Oil Drilling Companies
Power Generation
Petrochemicals
Gas Processing
Specialty Chemicals
Pharmaceuticals
Pharmaceutical Equipment
Chemical Equipment
Sea Water Equipment
Heat Exchangers
Condensers
Pulp and Paper Industry

SMO 254 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-01-03T18:38:50+05:30July 31st, 2021|

Alloy 20 Buttweld Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International offers a wide array of Alloy 20 Buttweld Fittings, where our entire product range is used in varied industrial sectors. There has long been a debate on whether these Alloy 20 Dish Cap Butt Weld Pipe Fittings is a stainless steel or a nickel alloy because the nickel content is right on the border of defining it as one way or the other. Specifically to withstand sulfuric acid, these Alloy 20 Tee Butt Weld Pipe Fittings’ nickel, chromium, molybdenum and copper levels all provide excellent general corrosion resistance.

Our Alloy 20 Pipe Reducer (UNS N08020) is an austenitic, nickel – iron – chromium based super alloy with additions of Copper and Molybdenum which provide resistance to hostile environments, pitting, and crevice corrosion. These Alloy 20 Pipe Elbow Butt Weld Pipe Fittings is a columbium stabilized material that combines excellent corrosion resistance by means of elevated mechanical properties and relatively easy fabrication. Meanwhile, these Alloy 20 Bend Pipe Fittings are also being offered in different sizes and shapes to our customers, where we as well offer the same at best prices.

Alloy 20 Buttweld Fittings | Alloy 20 Buttweld Fittings | Alloy 20 Buttweld Fittings | Alloy 20 Buttweld Fittings | Alloy 20 Buttweld Fittings | Alloy 20 Buttweld Fittings | Alloy 20 Buttweld Fittings | Alloy 20 Buttweld Fittings

These Alloy 20 Stub End is a nickel – iron – chromium austenitic alloy that was developed for maximum resistance to acid attack, specifically sulfuric acid. In addition, our Alloy 20 End Cap Butt Weld Pipe Fittings is used in heat exchangers, mixing tanks, metal cleaning and pickling equipment, and piping.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Alloy 20 Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Alloy 20 Pipe Fittings Chemical Composition

Alloy 20 Ni C Mo Mn Si Fe Cu S P Cr
32 – 38 0.02 max 2 – 3 1 – 2 0.7 max Bal 3 – 4 0.005 max 0.02 max 19 – 21

Alloy 20 Butt weld Fittings Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.1 g/cm3 1443 °C (2430 °F) Psi – 35000 , MPa – 241 Psi – 80000 , MPa – 551 30 %

Equivalent Grades for Incoloy® alloy 20 Pipe Fitting

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Alloy 20 N08020 2.4660 Z2NCUD31-20AZ NiCr20CuMo – – –
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Alloy 20 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 20 Butt weld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]No schema found.[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-07-31T11:57:17+05:30July 31st, 2021|

Stainless Steel 904L Buttweld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacture And Exporter Of Stainless Steel 904L Buttweld Fittings, which is supplied in a range of different conditions / tempers depending on the level of strength required. Stainless Steel 904L Elbow is chromium – nickel stainless steel and with the addition of titanium, and is resistant to inter – granular corrosion. General corrosion of Stainless Steel 904L Reducer Pipe Fittings is less than SS 904, and is resistance to a variety of corrosive media. Stainless Steel 904L Tee Pipe Fittings is used where resistance to inter – granular corrosion is required and where the parts are subjected to sustained heating or cooling within the range of 800 Degree F to 1500 Degree F.

Stainless Steel 904L Cross Pipe Fittings is commonly used in applications such as exhaust stacks, manifolds and ring collectors. Stainless Steel 904L Bend Pipe Fittings has good resistance to atmosphere corrosion and its bright attractive surface makes it an excellent choice for decorative structural applications. Stainless Steel 904L Stub End has good resistance to oxidation at temperatures up to 1550 Degree F, but is not recommended for use above 1600 Degree F. However, the corrosion resistance properties of Stainless Steel 904L End Cap are not as good as the 18 – 8 chromium – nickel steels and its susceptibility to carbide precipitation during welding restricts its use in many applications.

Stainless Steel 904L Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

SS 904L Pipe Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
904L min. – – – – – 19.0 4.00 23.00 0.10
max. 0.20 2.00 1.00 0.045 0.035 23.0 5.00 28.00 0.25

Stainless Steel 904L Butt weld Fittings Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
904L 490 220 35 70-90 typical –

Equivalent Grades for 904L Stainless Steel Pipe Fitting

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
904L N08904 904S13 X1NiCrMoCu25-20-5 1.4539 – – SUS 904L

SS WERKSTOFF NR. 1.4539 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 904L Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-22T11:13:21+05:30July 30th, 2021|

Stainless Steel 446 Buttweld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 446 Buttweld Fittings, which have good resistance to oxidation at temperatures up to 1700 Degree F. Our Stainless Steel 446 Elbow Pipe Fittings is a non – magnetic stainless steel, which is not harden able by heat treatment. These Stainless Steel 446 Reducer is the free machining modification of the basic 18 % chromium – 8 % nickel stainless steel. In extreme oxidizing atmospheres of our Stainless Steel 446 Tee Pipe Fittings, irregular scaling may be encountered, particularly above 1400 Degree F.

These Stainless Steel 446 Cross Pipe Fittings is molybdenum containing austenitic stainless steel, with improved corrosion resistance over other alloys. The increased levels of chromium, nickel and molybdenum over our Stainless Steel 446 Bend improve chloride pitting resistance and general corrosion. Through the controlled addition of nitrogen it is common for SS 317L to meet the mechanical properties of these Stainless Steel 446 Stub End Pipe Fittings, while maintaining a low carbon content.

Our Stainless Steel 446 End Cap Pipe Fittings is a high – carbon martensitic stainless steel, where as a martensitic stainless steel, it is magnetic and can be hardened by heat treatment. The high carbon content in these Stainless Steel 446 Dish Cap provides high hardness and strength, where despite this carbon content, the chromium content is sufficient to retain its stainless characteristics.

Stainless Steel 446 Pipe Fittings Specifications
Specifications : ASTM A403 / ASME SA403
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

SS 446 Pipe Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
446 min. – – – – – 23.0 – – 0.10
max. 0.2 1.5 0.75 0.040 0.030 30.0 – 0.50 0.25

Stainless Steel 446 Butt weld Fittings Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
446 485 275 20 92 201

Equivalent Grades for 446 Stainless Steel Pipe Fitting

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
446 S44600 – – 1.4762 / 1.4763 – – –

SS WERKSTOFF NR.1.4762/1.4763  Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 446 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-25T15:20:10+05:30July 30th, 2021|

Stainless Steel 410 Buttweld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 410 Buttweld Fittings , where a hardening heat treatment is necessary to bring out the maximum hardness and wear resistance. Since these materials absorb heat very slowly, Stainless Steel 410 Elbow Butt Weld Pipe Fittings should be heated gradually and allowed to remain at temperature long enough for to ensure uniform temperature in thick sections.

For maximum strength, hardness, and corrosion resistance, slowly heat Stainless Steel 410 Tee Butt Weld Pipe Fittings to 1800 Degree F (982 Degree C) and quench to room temperature in oil. If retained austenite is known to be present after the quench to room temperature, additional hardening response in Stainless Steel 410 Reducer Butt Weld Pipe Fittings may be achieved by sub – zero cooling to about –100 Degree F (-73 Degree C). The as – quenched structure of Stainless Steel 410 Cross is quite brittle and should be stress – relieved or tempered at approximately 400 Degree F to 500 Degree F (204 Degree C to 260 Degree C) to restore some ductility.

During tempering between approximately 300 Degree F (149 Degree C) and 600 Degree F (316 Degree C), a relaxation of the martensitic structure of Stainless Steel 410 Bends occurs whereby the volumetric stresses associated with the formation of martensitic upon quenching are relieved.

Stainless Steel 410 Pipe Fittings Specifications
Specifications : ASTM A403 / ASME SA403
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

SS 410 Pipe Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
410 min. – – – – – 11.5 – – –
max. 0.15 1.0 1.00 0.040 0.030 13.5 – 0.75 –

Stainless Steel 410 Butt weld Fittings Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
410 480 275 16 95 201

Equivalent Grades for 410 Stainless Steel Pipe Fitting

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
410 S41000 410S21 56A 1.4006 X12Cr13 2302 SUS 410

SS WERKSTOFF NR.1.4006 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 410 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-26T12:42:25+05:30July 29th, 2021|

Stainless Steel 347H Buttweld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 347H Buttweld Fittings, which is a dual – stabilized Ferritic, steel with 18 % chromium. Stainless Steel 347H Elbow Butt Weld Pipe Fittings exhibits good high temperature strength, plus good corrosion resistance in many exhaust gas environments and good oxidation resistance at elevated temperatures. With excellent machinability, Stainless Steel 347H Tee Butt Weld Pipe Fittings are also characterized by consistent quality from melt to melt and properties which accord exactly with the specifications.

In Stainless Steel 347H Cross Butt Weld Pipe Fittings, machinability has been improved without jeopardizing properties such as corrosion resistance and mechanical strength. The non-metallic inclusions in Stainless Steel 347H Reducer Butt Weld Pipe Fittings are of great significance to the improved machinability. In addition to sulphide, Stainless Steel 347H Bends contain oxide inclusions that improve chip breaking and reduce tool wear.

Stainless Steel 347H Stub End Butt Weld Pipe Fittings are not inherently strong at elevated temperatures, but columbium additions coupled with appropriate solution annealing markedly improve long – time creep rupture strength, and this makes it suitable for using in application in tube and automotive industries. The new generation of Stainless Steel 347H End Cap present even better opportunities to reduce tool wear and increase cutting speeds, improving productivity and significantly reducing cost per produced item.

Stainless Steel 347H Pipe Fittings Specifications
Specifications : ASTM A403 / ASME SA403
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

SS 347H Pipe Fittings Chemical Composition

Grade C Ni Mn P S Cr Si Mo N
347H 0.08 max 9.00-13.00 2.0 max 0.045 max 0.030 max 17.00 – 20.00 1.0 max – –

Stainless Steel 347H Butt weld Fittings Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1454°C (2650°F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 347H Stainless Steel Pipe Fitting

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
347H 1.4961 S34709 SUS 347H      –           –          – X6CrNiNb18-12

SS WERKSTOFF NR.1.4961 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 347H Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-27T11:45:05+05:30July 29th, 2021|

Stainless Steel 347 Buttweld Fittings Manufacturer In India

Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 347 Buttweld Fittings, which has excellent corrosion resistance properties. Stainless Steel 347 Elbow Pipe Fittings is an austenitic stainless steel with a nominal composition of 17 percent chromium and 7 percent nickel, which provides good strength and ductility when cold worked. Stainless Steel 347 Reducer is well suited to welding and forming and drawing, where the high strength grade of steel is available in several conditions or tempers. Stainless Steel 347 Cross Pipe Fittings is used in the annealed and cold rolled conditions.

In the work – hardened condition, Stainless Steel 347 Tee Pipe Fittings develops higher tensile strength than the other stable austenitic grades. Stainless Steel 347 Bend has a tensile strength and minimum yield strength. Stainless Steel 347 Stub End Pipe Fittings is a non – magnetic grade that is not harden able by heat treating, and is generally used in the annealed condition and is noted for its ease of fabrication and formability.

Stainless Steel 347 End Cap Pipe Fittings is austenitic free – machining stainless steel which is used primarily for parts requiring machining, grinding or polishing. Stainless Steel 347 Dish Cap was purposefully developed for ease of machining. The additional Sulphur present in Stainless Steel 347 Lateral Tee Pipe Fittings assists in breaking up turnings which reduces drag on the cutting tool and increases machining speeds.

Stainless Steel 347 Pipe Fittings Specifications
Specifications : ASTM A403 / ASME SA403
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

SS 347 Pipe Fittings Chemical Composition

Grade C Ni Mn P S Cr Si Mo N
347 0.08 max 9.00-13.00 2.0 max 0.045 max 0.030 max 17.00 – 20.00 1.0 max – –

Stainless Steel 347 Butt weld Fittings Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1454°C (2650°F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 347 Stainless Steel Pipe Fitting

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
347 1.4550 s31703 SUS 347      320S31    08Ch17N13M2T   Z6CNDT17‐123 X6CrNiMoTi17-12-2

SS WERKSTOFF NR.1.4550 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 347 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-01-23T18:45:06+05:30July 28th, 2021|

Stainless Steel 321 Buttweld Fittings Manufacturer In India

Sachiya Steel International is a Leading Manufacture And Exporter of Stainless Steel 321 Buttweld Fittings , which is non-magnetic and offered in different sizes. This Stainless Steel 321 Butt Weld Fittings is often used in super-heater and afterburner parts, along with compensators and expansion bellows. Our Stainless Steel 321H Butt Weld Fittings is used extensively for applications where the addition of titanium and its stabilizing effect as a carbide forming element allows it to be welded and / or used within the carbide precipitation range 430 Degree C – 870 Degree C without the risk of inter-granular corrosion.

This Stainless Steel 321 Pipe Fittings is well known in reference literature and more information can be obtained in this way. Our Stainless Steel 321H Pipe Fittings is also used in refinery equipment and high temperature chemical process equipment. Titanium addition in this Stainless Steel 321 Elbow is made to reduce or eliminate chromium carbide precipitation – resulting from welding or exposure to high temperatures.

Our Stainless Steel 321H Tee is as well used for heating element tubing and heat exchangers. This Stainless Steel 321 Reducer is used extensively in the aircraft and missile industries. Our Stainless Steel 321H Cross is often used in Expansion joints and Pharmaceutical production. These Stainless Steel 321Bend is very resistant to oxidation and inter-granular corrosion up to 850 º C in dry air service conditions.

Stainless Steel 321/321H Pipe Fittings Specifications
Specifications : ASTM A403 / ASME SA403
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

SS 321/321H Pipe Fittings Chemical Composition

Grade C Mn Si P S Cr N Ni Ti
SS 321 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 5(C+N) – 0.70 max
SS 321H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 4(C+N) – 0.70 max

Stainless Steel 321/321H Buttweld Fittings Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 321/321H Stainless Steel Pipe Fitting

STANDARD WERKSTOFF NR. UNS JIS EN
SS 321 1.4541 S32100 SUS 321 X6CrNiTi18-10
SS 321H 1.4878 S32109 SUS 321H X12CrNiTi18-9

SS 321/321H Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 321/321H Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-01-23T18:01:17+05:30July 28th, 2021|
LOGO 1200 X 300

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top