[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International offers a wide array of Alloy 20 Buttweld Fittings, where our entire product range is used in varied industrial sectors. There has long been a debate on whether these Alloy 20 Dish Cap Butt Weld Pipe Fittings is a stainless steel or a nickel alloy because the nickel content is right on the border of defining it as one way or the other. Specifically to withstand sulfuric acid, these Alloy 20 Tee Butt Weld Pipe Fittings’ nickel, chromium, molybdenum and copper levels all provide excellent general corrosion resistance.

Our Alloy 20 Pipe Reducer (UNS N08020) is an austenitic, nickel – iron – chromium based super alloy with additions of Copper and Molybdenum which provide resistance to hostile environments, pitting, and crevice corrosion. These Alloy 20 Pipe Elbow Butt Weld Pipe Fittings is a columbium stabilized material that combines excellent corrosion resistance by means of elevated mechanical properties and relatively easy fabrication. Meanwhile, these Alloy 20 Bend Pipe Fittings are also being offered in different sizes and shapes to our customers, where we as well offer the same at best prices.

Alloy 20 Buttweld Fittings | Alloy 20 Buttweld Fittings | Alloy 20 Buttweld Fittings | Alloy 20 Buttweld Fittings | Alloy 20 Buttweld Fittings | Alloy 20 Buttweld Fittings | Alloy 20 Buttweld Fittings | Alloy 20 Buttweld Fittings

These Alloy 20 Stub End is a nickel – iron – chromium austenitic alloy that was developed for maximum resistance to acid attack, specifically sulfuric acid. In addition, our Alloy 20 End Cap Butt Weld Pipe Fittings is used in heat exchangers, mixing tanks, metal cleaning and pickling equipment, and piping.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Alloy 20 Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Alloy 20 Pipe Fittings Chemical Composition

Alloy 20 Ni C Mo Mn Si Fe Cu S P Cr
32 – 38 0.02 max 2 – 3 1 – 2 0.7 max Bal 3 – 4 0.005 max 0.02 max 19 – 21

Alloy 20 Butt weld Fittings Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.1 g/cm3 1443 °C (2430 °F) Psi – 35000 , MPa – 241 Psi – 80000 , MPa – 551 30 %

Equivalent Grades for Incoloy® alloy 20 Pipe Fitting

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Alloy 20 N08020 2.4660 Z2NCUD31-20AZ NiCr20CuMo
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Alloy 20 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 20 Butt weld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]No schema found.[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]