screw tensile strength chart

Cupro Nickel 70 Screw Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Cupro Nickel 70 Screws, which are made to excellence by using superior quality of steel by our determined experts who hold rich understanding in this field. Cu-Ni 70/30 Hex Head Screws works in an extensive series of temperatures, and is obtainable in several forms for a diversity of products. In fact, Cu-Ni 70/30 Socket Head Cap Screws is a nickel – copper alloy that is quite resistant to steam and sea water at soaring temperatures in addition to caustic and salt solutions.

Cupro Nickel 70 Screws Manufacturer In India | Cupro Nickel 70 Screws Manufacturer In Mumbai | Cupro Nickel 70 Screws Exporter In India | Cupro Nickel 70 Screws Exporter In Mumbai | Cupro Nickel 70 Screws Supplier In India | Cupro Nickel 70 Screws Supplier In Mumbai | Cupro Nickel 70 Screws Stockist In India | Cupro Nickel 70 Screws Stockist In Mumbai
Cupro Nickel 70 Screws

       Cupro Nickel 70 Screws

Cu-Ni 70/30 Socket Set Screws (UNS C71500) is a nickel – copper alloy by means of outstanding corrosion resistance and good strength in a series of media particularly sea water, sulfuric acid, alkalis and hydrofluoric acid. Meanwhile, these Cu-Ni 70/30 Anchore Screws are also being offered in different sizes and shapes to our customers. These processing improves alloy purity and is required for Cu-Ni 70/30 Blind Rivet Screws to remove non – metallic inclusions that can form HARD spots in the material when the alloy is aged.

Inclusions in Cu-Ni 70/30 Concrete Screws can result in inconsistent material properties, increased machining difficulty and processing times and ultimately part failures. Finished fabrications can be produced to a wide range of mechanical properties in Cu-Ni 70/30 Steel Shoulder Screws when proper control of the amount of hot or cold working and the selection of appropriate thermal treatments is done.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cu-Ni Alloy 70/30 Screws Specifications
Specifications : ASTM B 151 ASME SB 151
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
70/30 Cupro Nickel Cu-Ni Screw Chemical Composition
Cu-Ni 70/30 Cu Pb Mn Fe Zn Ni
88.6 min 0.05 max 1.0 max 1.8 max 1 max 9-11 max
Copper Nickel Cu 70/30 Screw Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.1 g/cm3 1443 °C (2430 °F) Psi – 35,000, MPa – 241 Psi -80,000, MPa -551 30 %
Equivalent Grades for 70/30 Cu-Ni Screw
STANDARD UNS WERKSTOFF NR.
Cupro Nickel 70/30 C71500 2.0882
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Alloy 70/30 Screws Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
70/30 Cu-Ni Alloy Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cupro Nickel 70 Screws
Cupro Nickel 70 Screws

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Cupro Nickel 70 Screws, which are made to excellence by using superior quality of steel by our determined experts who hold rich understanding in this field. Cu-Ni 70/30 Hex Head Screws works in an extensive series of temperatures, and is obtainable in several forms for a diversity of products. In fact, Cu-Ni 70/30 Socket Head Cap Screws is a nickel – copper alloy that is quite resistant to steam and sea water at soaring temperatures in addition to caustic and salt solutions

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2022-04-20T11:10:04+05:30April 20th, 2022|

Cupro Nickel 90 Screw Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Cupro Nickel 90 Screws. Meanwhile, these Cu-Ni 90 / 10 Hex Head Screws is a 90 percent of copper and 10 percent of nickel alloy that as well comprises small but significant accompaniments of manganese and iron to improve general potency corrosion resistance. Our Cupro Nickel 90 / 10 Socket Head Cap Screws are being generally used in fittings and sheathing for ship exteriors, pumps, valves, and so on. In addition, these Copper Nickel 90 / 10 Socket Set Screws (UNS C70600) provides outstanding corrosion resistance, particularly in marine salt water atmospheres.

Cupro Nickel 90 Screws Manufacturer In India | Cupro Nickel 90 Screws Manufacturer In Mumbai | Cupro Nickel 90 Screws Exporter In India | Cupro Nickel 90 Screws Exporter In Mumbai | Cupro Nickel 90 Screws Supplier In India | Cupro Nickel 90 Screws Supplier In Mumbai | Cupro Nickel 90 Screws Stockist In India | Cupro Nickel 90 Screws Stockist In Mumbai
Cupro Nickel 90 Screws

  Cupro Nickel 90 Screws

Meanwhile, our Cu-Ni 90 / 10 Anchore Screws are as well being offered in different sizes, designs and shapes to our esteemed customers. These Cupro Nickel 90 / 10 Blind Rivet Screws is also used for Condensers, Condenser Plates, Evaporator Tubes, Ferrules, Heat Exchanger Tubes, Corrosion Resistance Corrosion Resistance, Petrochemicals, Salt Water, Erosion and Impingement, Moderate Strength, and Retains Strength at High Temperatures.

Our Copper Nickel 90 / 10 Concrete Screws is an alloy of copper, nickel and strengthening elements such as iron and manganese, which exhibits excellent resistance to impingement attack. These Cu-Ni 90 / 10 Threaded Screws are the metal of choice for seawater applications where high corrosion resistance and fabrication issues are critical.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Cu-Ni Alloy 90/10 Screws Specifications
Specifications : ASTM B 151 ASME SB 151
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

90/10 Cupro Nickel Cu-Ni Screw Chemical Composition
Cu-Ni 90/10 Cu Pb Mn Fe Zn Ni
88.6 min 0.05 max 1.0 max 1.8 max 1 max 9-11 max
Copper Nickel Cu 90/10 Screw Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.1 g/cm3 1443 °C (2430 °F) Psi – 35,000, MPa – 241 Psi -80,000, MPa -551 30 %
Equivalent Grades for 90/10 Cu-Ni Screw
STANDARD UNS WERKSTOFF NR.
Cupro Nickel 90/10 C70600 2.0872

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Alloy 90/10 Screws Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
90/10 Cu-Ni Alloy Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Cupro Nickel 90 Screws
Cupro Nickel 90 Screws

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Cupro Nickel 90 Screws. Meanwhile, these Cu-Ni 90 / 10 Hex Head Screws is a 90 percent of copper and 10 percent of nickel alloy that as well comprises small but significant accompaniments of manganese and iron to improve general potency corrosion resistance. Our Cupro Nickel 90 / 10 Socket Head Cap Screws are being generally used in fittings and sheathing for ship exteriors, pumps, valves, and so on

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]

By |2022-04-19T15:36:54+05:30April 19th, 2022|

Titanium Grade 2 Screws Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Titanium Grade 2 Screws. Titanium Grade 2 Hex Head Screws is pure titanium that experiences an allotropic alteration from the hexagonal close – crammed alpha stage to the body-focused cubic beta stage at a temperature of 1620.5 Deg F. These Titanium Grade 2 Socket Head Cap Screws is as well generally used in aircraft structural, bellows, honeycomb, gaskets, heat exchanger components, aircraft skin, etc. Usual applications for Titanium Grade 2 Socket Set Screws comprise petroleum refining, chemical process, biomedical along with heat exchangers in a collection of dissimilar uses.

Titanium Grade 2 Screws

In addition to this, with the help of our wide logistics base for these Titanium Grade 2 Anchore Screws, we have become capable of making on – time payment of ordered consignments. Meanwhile, Titanium Grade 2 Blind Rivet Screws are also being offered in different sizes and shapes to our customers.

These Titanium Grade 2 Concrete Screws is a commercially pure Titanium (CP) and is the most commonly used type of Titanium for industrial applications. Recommendations are for guidance only, and the suitability of Titanium Grade 2 Threaded Screws for a specific application can be confirmed only when we know the actual service conditions. These Titanium Grade 2 Panel Screws provides moderate strength (typical yield strength 352 MPa) combined with good ductility and formability and excellent weldability.

Titanium Alloy Gr 2 Screws Specifications

Specifications : ASTM B 348 ASME SB 348
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

Gr 2 Titanium Alloy Screw Chemical Composition

Titanium Gr 2 C Ti N Fe H O V Al
0.1 max 99.2 min 0.03 max 0.3 max 0.015 max 0.25 max

Titanium Alloy Gr 2 Screw Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
4.5 g/cm3 1665 °C (3030 °F) Psi – 39900 , MPa – 275 Psi – 49900 , MPa – 344 20 %

Equivalent Grades for Gr 2 Titanium Screw

STANDARD UNS WERKSTOFF NR.
Titanium Gr 2 R50400 3.7035

Alloy Gr 2 Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Gr 2 Titanium Alloy Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-20T16:09:52+05:30April 19th, 2022|

Titanium Grade 2 Screw Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Titanium Grade 2 Screw. Titanium Grade 2 Hex Head Screws is pure titanium that experiences an allotropic alteration from the hexagonal close – crammed alpha stage to the body-focused cubic beta stage at a temperature of 1620.5 Deg F. These Titanium Grade 2 Socket Head Cap Screws is as well generally used in aircraft structural, bellows, honeycomb, gaskets, heat exchanger components, aircraft skin, etc.

Titanium Grade 2 Screw

Usual applications for Titanium Grade 2 Socket Set Screws comprise petroleum refining, chemical process, biomedical along with heat exchangers in a collection of dissimilar uses. In addition to this, with the help of our wide logistics base for these Titanium Grade 2 Anchore Screws, we have become capable of making on – time payment of ordered consignments. Meanwhile, Titanium Grade 2 Blind Rivet Screws are also being offered in different sizes and shapes to our customers.

These Titanium Grade 2 Concrete Screws is a commercially pure Titanium (CP) and is the most commonly used type of Titanium for industrial applications. Recommendations are for guidance only, and the suitability of Titanium Grade 2 Threaded Screws for a specific application can be confirmed only when we know the actual service conditions. These Titanium Grade 2 Panel Screws provides moderate strength (typical yield strength 352 MPa) combined with good ductility and formability and excellent weldability.

Titanium Alloy Gr 2 Screws Specifications

Specifications : ASTM B 348 ASME SB 348
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

Gr 2 Titanium Alloy Screw Chemical Composition

Titanium Gr 2 C Ti N Fe H O V Al
0.1 max 99.2 min 0.03 max 0.3 max 0.015 max 0.25 max

Titanium Alloy Gr 2 Screw Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
4.5 g/cm3 1665 °C (3030 °F) Psi – 39900 , MPa – 275 Psi – 49900 , MPa – 344 20 %

Equivalent Grades for Gr 2 Titanium Screw

STANDARD UNS WERKSTOFF NR.
Titanium Gr 2 R50400 3.7035

Alloy Gr 2 Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Gr 2 Titanium Alloy Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-20T16:18:41+05:30April 18th, 2022|

Super Duplex S32750 Screw Manufacturers In India

Super Duplex S32750 Screw Manufacturers In India

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Super Duplex S32750 Screw, where our quality supervisors severely inspect the complete array on different strictures to make sure about perfection. Offering superior potency than both 22 percent of Cr and austenitic, Super Duplex S32760 Hex Head Screws is suitable to a range of uses in industries such as Oil & Gas, Marine environments and Chemical Processing. Super Duplex S32750 Socket Head Cap Screws is considered to feature soaring potency, resistance to pitting, SCC, corrosion fatigue and erosion corrosion, strong weldability and crevice corrosion.

Super Duplex S32750 Screw

Super Duplex S32750 Socket Set Screws is a diverse microstructure of ferrite and austenite that has better – quality of potency over austenitic and ferritic steel grades. Meanwhile, these Super Duplex S32760 Anchore Screws are also being offered in different sizes and shapes to our customers. ASTM was designed to detect the precipitation of intermetallic phases in duplex stainless steels and should be specified as a requirement for Super Duplex S32750 Blind Rivet Screws.

Very long exposure to temperatures in the 650 Degree – 980 Degree F range may lead to a loss of toughness in Super Duplex S32760 Concrete Screws resulting from precipitation of alpha prime phase of ferrite of the duplex. This reaction is slow enough that Super Duplex S32750 Threaded Screws is detected only after long service in this temperature range, and not by exposures during fabrication.

Super Duplex S32750 Screws Specifications

Specifications : ASTM F 53 ASME SF 53 / ASTM F 55 ASME SF 55
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

S32750 / S32760 Super Duplex Screw Chemical Composition

S32750 / S32760 C N P Si Mn Mo Ni Cr S Other
0.030 0.24/0.32 0.035 0.80 1.20 3.0/5.0 6.00/8.00 24.0/26.0 0.020 Cu:0.50

Super Duplex Steel S32750 / S32760 Screw Mechanical Properties

S32750 / S32760 Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
7.8 g/cm3 1350 °C (2460 °F) Psi – 80000 , MPa – 550 Psi – 116000 , MPa – 800 15 %

Equivalent Grades for S32750 / S32760 Super Duplex Stainless Steel Screw

STANDARD UNS WERKSTOFF NR.
Super Duplex S32750 S32750 1.4410
Super Duplex S32760 S32760 1.4410

S32760 Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

S32750 Super Duplex Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-21T16:33:12+05:30April 18th, 2022|

Carbon Steel Screws Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Carbon Steel Screws, where there is no single measure of corrosion resistance. The best steels to use for this purpose are the high nickel austenitic steels such as Carbon Steel Hex Head Screws, where in some cases, it can be considered. The resistance to pitting and crevice corrosion of ASME SA 307 Carbon Steel Socket Head Cap Screws increases with the content of chromium, molybdenum and nitrogen in the steel.

Carbon Steel Screws

Carbon Steel Screws

Carbon Steel Screws Manufacturer In India | Carbon Steel Screws Manufacturer In Mumbai | Carbon Steel Screws Exporter In India | Carbon Steel Screws Exporter In Mumbai | Carbon Steel Screws Supplier In India | Carbon Steel Screws Supplier In Mumbai | Carbon Steel Screws Stockist In India | Carbon Steel Screws Stockist In Mumbai

However, Carbon Steel Socket Set Screws is convenient to use the Pitting Resistance Equivalent Number (PREN) as a means of ranking the grades. Sachiya Steel International is one of the prominent supplier and dealer for high quality Carbon Steel Anchore Screws, which has high corrosion resistance in chloride containing media, including seawater.

Carbon Steel Blind Rivet Screws are more prone to precipitation of sigma phase, nitrides and carbides than corresponding austenitic steels, causing embrittlement and reduced corrosion resistance. Carbon Steel Concrete Screws is hyper – stainless steel for service in highly corrosive conditions was also very high mechanical strength is required. This makes Carbon Steel Threaded Screws ideal for use in deep – water umbilical and a range of other oil and gas applications. Carbon Steel Panel Screws is made in tune with different requirements of our copious clients.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Carbon Steel Screws Specifications
Specifications : ASTM A 307 ASME SA 307
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 2180 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Carbon Steel Screw Chemical Composition
Element Carbon, max Manganese, max Phosphorus, max Sulfur, max
Grade A 0.29 % 1.20 % 0.04 % 0.15 %
Grade B 0.29 % 1.20 % 0.04 % 0.05 %
Carbon Steel Screw Mechanical Properties
Grade Tensile, ksi Yield, min, ksi Elong %, min
A 60 min 18
B 60 – 100 18
C* 58 – 80 36 23

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Carbon Steel Screws Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Carbon Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 102184/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 102184 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 102184/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 102184 3.1 and EN 102184 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Carbon Steel Screws
Carbon Steel Screws

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Carbon Steel Screws, where there is no single measure of corrosion resistance. The best steels to use for this purpose are the high nickel austenitic steels such as Carbon Steel Hex Head Screws, where in some cases, it can be considered. The resistance to pitting and crevice corrosion of ASME SA 307 Carbon Steel Socket Head Cap Screws increases with the content of chromium, molybdenum and nitrogen in the steel.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]

By |2022-04-16T14:27:38+05:30April 16th, 2022|

Duplex Steel S31803 Screws Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Duplex Steel S31803 Screws, which is factory – made at par by means of the international quality of standards by making use of superior – grade of steel. Duplex Steel S31803 Hex Head Screws resists sulphide stress corrosion and chloride atmospheres. Duplex Steel S32205 Socket Head Cap Screws is generally used in Chemical Process Industries: such as in Nitric Acid Procedures, Sulphuric Acid Manufacture, Phosphoric Acid Developments, Polypropylene Manufacture, Ethylene oxide, Machinery Handling Organic and Fatty Acids, Chemical Tankers and Storage, Heat Exchangers, and so on.

Duplex Steel S31803 Screws Manufacturer In India | Duplex Steel S31803 Screws Manufacturer In Mumbai | Duplex Steel S31803 Screws Exporter In India | Duplex Steel S31803 Screws Exporter In Mumbai | Duplex Steel S31803 Screws Supplier In India | Duplex Steel S31803 Screws Supplier In Mumbai | Duplex Steel S31803 Screws Stockist In India | Duplex Steel S31803 Screws Stockist In Mumbai
Duplex Steel S31803 Screws

      Duplex Steel S31803 Screws

Duplex Steel S31803 Socket Set Screws is a stainless steel whose design allows uniting better – quality of resistance to pitting, soaring potency, stress corrosion, cracking and crevice corrosion. Meanwhile, these Duplex Steel S32205 Anchore Screws are also being offered in different sizes and shapes to our customers. As further discussed elsewhere, exposure of a Duplex Steel S31803 Blind Rivet Screws to temperatures in the range of 1100 Degree F – 1825 Degree F can cause precipitation of intermetallic phases with substantial loss of corrosion resistance.

These precipitates in Duplex Steel S32205 Concrete Screws are better detected by tests for critical pitting temperature or critical crevice temperature in strong chloride environments, and not by the ASTM tests commonly used for sensitization to inter – granular corrosion. We also offer these Duplex Steel S31803 Threaded Screws in customized sizes and shapes for our esteemed clients.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Duplex S31803 Screws Specifications
Specifications : ASTM A 479 ASME SA 479
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
S31803 / S32205 Duplex Screw Chemical Composition
S31803 / S32205 C N P Si Mn Mo Fe Cr S Ni
1.0 0.03 0.02 2.0 3.0 – 3.5 22.0 – 23.0 0.03 4.5 – 6.5 0.14 – 0.2 Bal
Duplex Steel S31803 / S32205 Screw Mechanical Properties
S31803 / S32205 Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
7.8 g/cm3 1350 °C (2460 °F) Psi – 80000 , MPa – 550 Psi – 116000 , MPa – 800 15 %
Equivalent Grades for S31803 / S32205 Duplex Stainless Steel Screw
STANDARD UNS WERKSTOFF NR.
Duplex S31803 S31803 1.4462
Duplex S32205 S32205 1.4462
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
S32205 Screws Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
S31803 Duplex Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Duplex Steel S31803 Screws
Duplex Steel S31803 Screws

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Duplex Steel S31803 Screws, which is factory – made at par by means of the international quality of standards by making use of superior – grade of steel. Duplex Steel S31803 Hex Head Screws resists sulphide stress corrosion and chloride atmospheres.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2022-04-16T13:46:54+05:30April 16th, 2022|

Nickel Alloy 201 Screws Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Screws, which is a low carbon modification of the Nickel 200. Our Nickel 201 Hex Head Screws is generally specified where exposure to temperatures above 600 Degree F is expected. Nickel 201 Socket Head Cap Screws has a low annealed hardness and very low work – hardening rate, where it’s thermal and magnetic properties are also similar. Those who use Nickel 201 Socket Set Screws find it desirable in deep drawing, spinning, and coining.

Nickel Alloy 201 Screws Manufacturer In India | Nickel Alloy 201 Screws Manufacturer In Mumbai | Nickel Alloy 201 Screws Exporter In India | Nickel Alloy 201 Screws Exporter In Mumbai | Nickel Alloy 201 Screws Supplier In India | Nickel Alloy 201 Screws Supplier In Mumbai | Nickel Alloy 201 Screws Stockist In India | Nickel Alloy 201 Screws Stockist In Mumbai
Nickel Alloy 201 Screws

Nickel Alloy 201 Screws

Nickel 201 Anchore Screws is not subject to embrittlement at temperatures of 600 Degree F – 1400 Degree F due to its low Carbon. However, Nickel 201 Blind Rivet is subject to inter – granular embrittlement by Sulphur compounds at temperatures above 600 Degree F. Nickel 201 Concrete Screws is particularly resistant to caustic soda, dry fluorine, chlorine, hydrogen chloride and hydrofluoric acid. In addition, Nickel 201 Threaded Screws can be applied to corrosion – resistant equipment including but not limited to: caustic evaporators, spun anodes, and laboratory crucibles.

Other applications of Nickel 201 Steel Shoulder Screws include heat exchanger parts, electrical parts and aerospace components. Nickel 201 Panel Screws is a lower carbon version of commercially pure (99 %) nickel, where the material does contain minor amounts of other elements, totaling less than 1 %. Weldable by standard, however oxyacetylene welding should not be used with Nickel 201 Machine Screws.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Nickel Alloy 201 Screws Specifications
Specifications : ASTM B 160 ASME SB 160
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 201 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

201 Nickel Alloy Screw Chemical Composition
Nickel 201 Ni C Mo Mn Si Fe P S Cu Cr
Balance 0.15 max 0.35 max 0.35 max 0.40 max 0.01 max 0.25 max
Nickel Alloy 201 Screw Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 21500 , MPa – 148 Psi – 67000 , MPa – 462 45 %
Equivalent Grades for 201 Nickel Screw
STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Nickel 201 N02201 2.4068 LC-Ni 99 NW 2201 NA 12 НП-2

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Alloy 201 Screws Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
201 Nickel Alloy Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Nickel Alloy 201 Screws
Nickel Alloy 201 Screws Manufacturer

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Screws, which is a low carbon modification of the Nickel 200. Our Nickel 201 Hex Head Screws is generally specified where exposure to temperatures above 600 Degree F is expected.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]

By |2022-04-15T11:55:03+05:30April 15th, 2022|

Nickel Alloy 200 Screws Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Screws to the respected clienteles, which has some outstanding features to offer such as durable, lightweight, dimensionally steady, and so on. Our Nickel 200 Hex Head Screws (UNS N02200) are generally used in Chemical Storage and Processing. These Nickel 200 Socket Head Cap Screws is commercially untainted formed nickel, and has exceptional mechanical attributes and outstanding resistance to a lot of corrosive atmospheres. Our Nickel 200 Socket Set Screws are commercially pure formed materials and solid solution reinforced by means of with excellent mechanical features over an extensive variety of temperatures and outstanding resistance to a lot of corrosives, especially hydroxides.

Nickel Alloy 200 Screws Manufacturer In India | Nickel Alloy 200 Screws Manufacturer In Mumbai | Nickel Alloy 200 Screws Exporter In India | Nickel Alloy 200 Screws Exporter In Mumbai | Nickel Alloy 200 Screws Supplier In India | Nickel Alloy 200 Screws Supplier In Mumbai | Nickel Alloy 200 Screws Stockist In India | Nickel Alloy 200 Screws Stockist In Mumbai 
Nickel Alloy 200 Screws

Nickel Alloy 200 Screws

Meanwhile, these Nickel 200 Anchore Screws are as well being offered in different sizes and shapes to our customers. The combination of Molybdenum and Copper in our Nickel 200 Blind Rivet Screws, provide excellent corrosion resistance to reducing media, while the high Chromium content gives good oxidizing resistance.

These Nickel 200 Concrete Screws is a copper – bearing Ni – Cr – Mo material with exceptional resistance to sulfuric nickel, where it is further unique among the versatile nickel – chromium – molybdenum materials in having a deliberate copper content addition. Our Nickel 200 Threaded Screws is known as the most universally corrosion resistant material available today. These Nickel 200 Steel Shoulder Screws is used in a variety of environments from moderately oxidizing to strong reducing conditions.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Nickel Alloy 200 Screws Specifications
Specifications : ASTM B 160 ASME SB 160
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

200 Nickel Alloy Screw Chemical Composition
Nickel 200 Ni C Mo Mn Si Fe P S Cu Cr
99.0 min 0.15 max 0.35 max 0.1 max 0.4 max 0.01 max 0.25 max
Nickel Alloy 200 Screw Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 21500 , MPa – 148 Psi – 67000 , MPa – 462 45 %
Equivalent Grades for 200 Nickel Screw
STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Nickel 200 N02200 2.4066 N-100M Ni 99.2 NW 2200 NA 11 НП-2

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Alloy 200 Screws Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
200 Nickel Alloy Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Nickel Alloy 200 Screws
Nickel Alloy 200 Screws

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Screws to the respected clienteles, which has some outstanding features to offer such as durable, lightweight, dimensionally steady, and so on. Our Nickel 200 Hex Head Screws (UNS N02200) are generally used in Chemical Storage and Processing.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2022-04-15T18:23:42+05:30April 15th, 2022|

Monel Alloy K500 Screws Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Screws, which has some outstanding features such as durable, dimensionally stable, rust – proof and so on. These Monel K500 Hex Head Screws has remarkably excellent dimensional constancy. Our Monel K500 Socket Head Cap Screws is a Nickel – Copper age – harden able alloy that combines the corrosion resistance of Alloy 400 Screws in the company of elevated power corrosion fatigue and erosion resistance. In fact, this nickel – copper Monel K500 Socket Set Screws syndicates the outstanding corrosion resistance attribute of Monel alloy 400 Bolts by means of the additional benefits of superior potency and firmness.

Monel Alloy K500 Screws Manufacturer In India | Monel Alloy K500 Screws Manufacturer In Mumbai | Monel Alloy K500 Screws Exporter In India | Monel Alloy K500 Screws Exporter In Mumbai | Monel Alloy K500 Screws Supplier In India | Monel Alloy K500 Screws Supplier In Mumbai | Monel Alloy K500 Screws Stockist In India | Monel Alloy K500 Screws Stockist In Mumbai
Monel Alloy K500 Screws

  Monel Alloy K500 Screws

Monel K500 Anchore Screws (UNS N05500) is an age – harden able form of the nickel – copper alloy Monel 400 Nuts. Meanwhile, these Monel K500 Blind Rivet Screws are also being offered in different sizes and shapes to our customers. We also offer these Monel K500 Concrete Screws in best possible prices. A stabilizing anneal in these Monel K500 Threaded Screws restores resistance to corrosion.

If material is to be welded or subjected to further thermal treatment and subsequently exposed to an environment that may cause, the stabilizing anneal in Monel K500 Steel Shoulder Screws should be performed regardless of cooling rate from the hot-working temperature. Resistance to a variety of oxidizing substances such as nitric acid, nitrates, and oxidizing salts comes from the chromium content in these Monel K500 Panel Screws.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Monel Alloy K500 Screws Specifications
Specifications : ASTM F 467 ASME SF 467
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
K500 Monel Alloy Screw Chemical Composition
Monel K500 Ni C Al Mn Si Fe Cu S Ti Cr
63.0 min 0.25 max 2.3 – 3.15 1.5 max 0.5 max 05 – 2 27.0 – 33.0 0.010 max 0.35 – 0.85
Monel Alloy K500 Screw Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.44 g/cm3 1350 °C (2460 °F) Psi – 1,15,000 , MPa – 790 Psi – 1,60,000 , MPa – 1100 20 %
Equivalent Grades for K500 Monel Screw
STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Monel K500 N05500 2.4375
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Alloy K500 Screws Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
K500 Monel Alloy Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Monel Alloy K500 Screws
Monel Alloy K500 Screws

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Screws, which has some outstanding features such as durable, dimensionally stable, rust – proof and so on. These Monel K500 Hex Head Screws has remarkably excellent dimensional constancy.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2022-04-14T11:59:41+05:30April 14th, 2022|
Go to Top