LOGO 1200 X 300

nut screw size chart pdf

Stainless Steel 446 Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 446 Screw, which has a high strength and good corrosion resistant austenitic alloys. Stainless Steel 446 Hex Head Screws has nearly double the yield strength of SS 304 and SS 316 and has better corrosion resistance than 317L stainless steel. These Stainless Steel 446 Socket Head Cap Screws remains non – magnetic even after being severely cold worked. Room temperature forming is suggested in Stainless Steel 446 Socket Set Screws, along with sigma formation should be anticipated and care should be taken to avoid heavy mechanical impact at room temperature.

Stainless Steel 446 Screw

Although improvements in machinability in the past have been associated with reduced corrosion resistance, these Stainless Steel 446 Anchore Screws has been shown to have corrosion resistance within the range typically expected to 304 / 304L stainless steel. Because of its low carbon content, Stainless Steel 446 Blind Rivet Screws retains this corrosion resistance in the as – welded condition.

These Stainless Steel 446 Concrete Screws is a versatile, general purpose stainless steel with good resistance to atmospheric corrosion, to many organic and inorganic chemicals, and to food and beverages. Stainless Steel 446 Threaded Screws has also been used in vacuum processing equipment and specialized instruments where high integrity is essential. These Stainless Steel 446 Steel Shoulder Screws maintains strength at high temperatures as well as sub – zero temperatures.

SS 446 Screws Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M33
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

446 Stainless Steel Screw Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
446 min. – – – – – 23.0 – – 0.10
max. 0.2 1.5 0.75 0.040 0.030 30.0 – 0.50 0.25

Stainless Steel 446 Screw Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
446 485 275 20 92 201

Stainless Steel 446 Screw Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
446 7750 200 9.9 11.4 11.6 24.9 28.7 460 570

Equivalent Grades for 446 Stainless Steel Screw

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
446 S44600 – – 1.4762 / 1.4763 – – –

SS 446 Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

446 Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-03T12:12:10+05:30March 12th, 2022|Screw|

Stainless Steel 410 Screw Manufacturers In India

Sachiya Steel International is one of the leading Manufacturer And Exporter Of High Quality Stainless Steel 410 Screw, where we can supply the same for any project big or small. Unlike low carbon shim steel, stock of Stainless Steel 410 Hex Head Screws is universally used for automobile and truck axle shims, for tool and dies alignment purposes, arbor spacers and where combined hardness, flatness and accuracy are important. Stainless Steel 410 Socket Head Cap Screws is double tempered to relieve internal stresses and to guarantee that no un- tempered martensitic remains in the steel.

Stainless Steel 410 Screw

These attributes of Stainless Steel 410 Socket Set Screws are in compliance with standards set for H2S-containing environments. Stainless Steel 410 Anchore Screws also meets great ASTM standards, making them optimal for resisting corrosion during petrochemical applications such as sour gas H2S services. Stainless Steel 410 Blind Rivet Screws is a martensitic free machining grade of stainless that can be hardened by heat treatment to achieve elevated strength and hardness. Due to its low cost and ready machinability, Stainless Steel 410 Concrete Screws is readily used in its highly tempered state.

Stainless Steel 410 Threaded Screws exhibits better machining characteristics than austenitic grades, however, sacrifices corrosion resistance. High Sulphur, free – machining grades like Stainless Steel 410 Steel Shoulder Screws are unsuitable for marine or any chloride exposure situations. Stainless Steel 410 Panel Screws is composed of carbon, chromium, manganese, phosphorous, silicon, and Sulphur.

SS 410 Screws Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M33
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

410 Stainless Steel Screw Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
410 min. – – – – – 11.5 – – –
max. 0.15 1.0 1.00 0.040 0.030 13.5 – 0.75 –

Stainless Steel 410 Screw Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
410 480 275 16 95 201

Stainless Steel 410 Screw Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
410 7750 200 9.9 11.4 11.6 24.9 28.7 460 570

Equivalent Grades for 410 Stainless Steel Screw

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
410 S41000 410S21 56A 1.4006 X12Cr13 2302 SUS 410

SS 410 Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

410 Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-01-30T18:43:50+05:30March 12th, 2022|Screw|

Stainless Steel 347H Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 347H Screw, which are parallel to the longitudinal grain and are more likely to crack around the outer edge because it experiences tensile loads. This directional characteristic of our Stainless Steel 347H Hex Head Screws is substantially reduced in steels that have been treated for sulphide shape control. These Stainless Steel 347H Socket Head Cap Screws is used in cars, trucks, cranes, bridges, roller coasters and other structures that are designed to handle large amounts of stress or need a good strength – to – weight ratio. Cross – sections and structures of our Stainless Steel 347H Socket Set Screws are usually 20 % to 30 % lighter than carbon steel with the same strength.

Stainless Steel 347H Screw

These Stainless Steel 347H Anchors Screws are also more resistant to rust than most carbon steels because of their lack of pearlite – the fine layers of ferrite (almost pure iron) and cementite in pearlite. A common type of our micro – alloyed Stainless Steel 347H Blind Rivet has improved – formability.

One of the disadvantages of these Stainless Steel 347H Concrete Screws is that it is 30 % to 40 % less ductile. Our Stainless Steel 347H Threaded Screws is a material with a mass content of iron larger than the content of any other chemical element, and by means of a carbon content of usually less than two percent.

SS 347H Screws Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M33
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

347H Stainless Steel Screw Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
347H min. 0.04 – – – – 17.0 3.00 9.0 –
max. 0.10 2.0 1.00 0.045 0.030 19.0 4.00 13.0 –

Stainless Steel 347H Screw Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
347H 515 205 40 92 201

Stainless Steel 347H Screw Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
347H 8000 193 17.2 17.8 18.4 16.2 21.5 500 720

Equivalent Grades for 347H Stainless Steel Screw

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
347H S34709 – – 1.4961 – – –

SS 347H Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

347H Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-27T11:08:13+05:30March 11th, 2022|

Stainless Steel 347 Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Stainless Steel Stainless Steel 347 Screw, which is a guide to the minimum bend diameters of hot-rolled and annealed plate and annealed sheet and strip. Stainless Steel 347 Hex Head Screws can be readily machined, but its high strength and work-hardening characteristics must be considered in the selection and use of proper tool materials and design, operating speeds, and coolants.

Stainless Steel 347 Screw

When machined in the age – hardened condition Stainless Steel 347 Socket Head Cap Screws will have a slightly better finish; chip action on chip – breaker tools will be better. The use of annealed Stainless Steel 347 Socket Set Screws, however, provides easier machining and longer tool life. Rate of furnace cooling during aging in Stainless Steel 347 Anchors is not critical, but a rate of 100 Degree F / hour is sometimes specified. Properties of Stainless Steel 347 Blind Rivet receiving these heat treatments are shown in the section of Mechanical Properties.

Stainless Steel 347 Concrete Screws shows the importance of a 1650 Degree F – 1750 Degree F finish – forging temperature for achievement of notch ductility in large forgings in stress – rupture applications. Care should be taken to avoid overheating Stainless Steel 347 Threaded Screws by heat build – up due to working. Also, Stainless Steel 347 Steel Shoulder Screws should be reheated when any portion has cooled below 1650 Degree F, where pre – heating tools and dies up to 500 Degree F is recommended.

SS 347 Screws Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M33
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

347 Stainless Steel Screw Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
347 min. – – – – – 17.0 2.00 9.0 –
max. 0.08 2.0 1.00 0.045 0.030 20.0 3.00 13.0 –

Stainless Steel 347 Screw Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
347 515 205 40 95 201

Stainless Steel 347 Screw Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
347 8000 193 17.2 17.8 18.4 16.2 21.5 500 720

Equivalent Grades for 347 Stainless Steel Screw

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
347 S34700 – X6CrNiNb18-10 1.4550 – – –

SS 347 Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

347 Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-27T16:34:48+05:30March 11th, 2022|

Stainless Steel 321 Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 321 Screw, which is an electric-furnace processed austenitic stainless steel. These Stainless Steel 321 Screws is a titanium-stabilized version and used in particular applications within the sensitizing temperature range. This titanium addition in Stainless Steel 321H Screws reduces or prevents carbide precipitation during welding and in the 800 ° – 1500 ° F service conditions.

Stainless Steel 321 Screw

However local depletion within the weld area of Stainless Steel 321 Hex Head Screws can still be a problem leading to some inter-granular corrosion if later exposed to severe corrosive conditions. The key property of Stainless Steel 321H Socket Head Cap Screws is the added titanium content stabilizing the material and making its resistance to carbide precipitation when exposed to high temperatures and resistance to oxidation its main characteristics. Resistance to organic acids and some inorganic acids in Stainless Steel 321 Socket Set Screws is excellent.

Stabilization in Stainless Steel 321H Anchors Screws is recommended for most severe service conditions (above 425 ° C) and particularly for material annealed at the upper side of the annealing temperature range. Stainless Steel 321 Blind Rivet Screws has excellent resistance oxidation to 1500 ° F (816 ° C) and good low temperature toughness. Stainless Steel 321H Concrete Screws has working temperatures of 2100 – 2300 ° F (1149 – 1260 ° C) are recommended for forging, upsetting and other hot working processes.

SS 321/321H Screws Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

321/321H Stainless Steel Screws Chemical Composition

Grade C Mn Si P S Cr N Ni Ti
SS 321 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 5(C+N) – 0.70 max
SS 321H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 4(C+N) – 0.70 max

Stainless Steel 321/321H Screw Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 321/321H Stainless Steel Screw

STANDARD WERKSTOFF NR. UNS JIS EN
SS 321 1.4541 S32100 SUS 321 X6CrNiTi18-10
SS 321H 1.4878 S32109 SUS 321H X12CrNiTi18-9

SS 321/321H Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

321/321H Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-29T12:12:17+05:30March 10th, 2022|

Stainless Steel 317L Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 317L Screw, which are finished in an AOD vessel and the carbons levels are generally low due to the absence of oxygen. Generally manganese is added to Stainless Steel 317L Hex Head Screws to assist in de – oxidation, during melting, and to prevent the formation of iron sulphide inclusions which can cause hot cracking problems. Stainless Steel 317L Socket Head Cap Screws is also an “austenite” stabilizer and when added in higher levels (from 4 % to 15%) replace some of the nickel in stainless steel grades.

Stainless Steel 317L Screw

Titanium is the main element used to stabilize Stainless Steel 317L Socket Set Screws before the use of AOD (Argon-Oxygen Decarburization) vessels. When Stainless Steel 317L Anchors Screws is melted in air, it is difficult to reducing the carbon levels. Stainless Steel 317L Blind Rivet Screws is allowed to have a maximum carbon level of 0.15 %.

At this high level, something was needed to stabilize the carbon in Stainless Steel 317L Concrete Screws and titanium was the most common way. Titanium will react with the carbon to form titanium carbides in Stainless Steel 317L Threaded Screws and prevent the formation of chrome carbides that could affect the formation of the “passive” layer. The higher the chromium levels in Stainless Steel 317L Steel Shoulder Screws, the greater the protection.

SS 317L Screws Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M33
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

317L Stainless Steel Screw Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
317L min. – – – – – 18.0 3.00 11.0 –
max. 0.03 2.0 0.75 0.040 0.03 20.0 4.00 15.0 –

Stainless Steel 317L Screw Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
317L 515 205 35 95 217

Stainless Steel 317L Screw Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
317L 8000 193 17.2 17.8 18.4 16.2 21.5 500 720

Equivalent Grades for 317L Stainless Steel Screw

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
317L S31703 – – 1.4438 – – –

SS 317L Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

317L Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-30T12:14:19+05:30March 10th, 2022|

Stainless Steel 317 Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 317 Screw, which can be successfully welded by all standard methods, where preheating is not necessary. Properties of Stainless Steel 317 Hex Head Screws comparable to those of the parent metal may be achieved in the weld metal by post – weld heat treatment. As for other high strength steels, precaution should be taken in design and welding procedures of these Stainless Steel 317 Socket Head Cap Screws to avoid concentration of weldment stresses.

Stainless Steel 317 Screw

After solution treatment a single low temperature “age hardening” treatment is employed to achieve required properties of Stainless Steel 317 Socket Set Screws. Heat treatment in these Stainless Steel 317 Anchors Screws results in no distortion and only superficial discoloration, where a slight decrease in size (shrinkage) takes place during the hardening. In solution treated, Stainless Steel 317 Blind Rivet has lower resistance to stress corrosion cracking, and lower ductility compared to aged conditions.

These Stainless Steel 317 Concrete Screws should not generally be used in the solution treated condition, even if the hardness is considered satisfactory. Stainless Steel 317 Threaded Screws has good oxidation resistance, but to avoid reduction of its mechanical properties and hardness it should not be used above its age hardening temperature. The great benefit of these Stainless Steel 317 Steel Shoulder Screws is that they are generally supplied in the solution treated condition.

SS 317 Screws Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M33
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

317 Stainless Steel Screw Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
317 min. – – – – – 18.0 – 11.0 –
max. 0.8 2.0 1.00 0.040 0.03 20.0 14.0 –

Stainless Steel 317 Screw Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
317 515 205 35 95 217

Stainless Steel 317 Screw Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
317 8000 193 17.2 17.8 18.4 16.2 21.5 500 720

Equivalent Grades for 317 Stainless Steel Screw

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
317 S31700 – – 1.4449 – – –

SS 317 Screws Application Industries

Off-Shore Oil Drilling Companies
Power Generation
Petrochemicals
Gas Processing
Specialty Chemicals
Pharmaceuticals
Pharmaceutical Equipment
Chemical Equipment
Sea Water Equipment
Heat Exchangers
Condensers
Pulp and Paper Industry

317 Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-01-30T18:27:23+05:30March 9th, 2022|Screw|

Stainless Steel 316Ti Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 316Ti Screw, which is characterized by its corrosion resistance, especially in cases of oxidation and salt water. Stainless Steel 316Ti Hex Head Screws is a stainless steel with applications ranging from the manufacturing of chemical equipment, kitchen and cooking utensils and equipment, to surgical tools and textile dyeing equipment. Stainless Steel 316Ti Socket Head Cap Screws is the most commonly utilized grade of stainless steel, being extremely versatile in application, form, and finishes.

Stainless Steel 316Ti Screw

Stainless Steel 316Ti Socket Set Screws is considered the basic stainless – steel alloy, composed of 18 % chromium and 8 % nickel, where these components also give causes that are to be referred to as “18 / 8”. The remainder of the composition of Stainless Steel 316Ti Anchors is made up of carbon, manganese, silicon and very small amounts of phosphorous and Sulphur. This makeup ensures that Stainless Steel 316Ti Blind Rivet has a well – balanced level of performance in terms of weldability, corrosion resistance and anti – oxidation properties.

Additionally, Stainless Steel 316Ti Concrete Screws is pliable under both hot and cold working, though it responds better to cold working; it will only work harden under cold working. Stainless Steel 316Ti Threaded Screws is extended exposure to temperatures between the ranges of 800 Degree F – 1500 Degree F that can lead to embrittlement and should be carefully monitored.

SS 316Ti Screws Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M33
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

316Ti Stainless Steel Screw Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
316Ti min. – – – – – 16.0 2.00 10.0 –
max. 0.08 2.0 0.75 0.045 0.030 18.0 3.00 14.0 –

Stainless Steel 316Ti Screw Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
316Ti 515 205 35 75 205

Stainless Steel 316Ti Screw Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
316Ti 8000 193 17.2 17.8 18.4 16.2 21.5 500 720

Equivalent Grades for 316Ti Stainless Steel Screw

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
316Ti S31635 320S31 X6CrNiMoTi17-12-2 1.4571 Z6CNDT17‐12 08Ch17N13M2T SUS 316Ti

SS 316Ti Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

316Ti Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-01-30T17:51:48+05:30March 9th, 2022|Screw|

Stainless Steel 316 Screw Manufacturers In India

Stainless Steel 316 Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 316 Screw, which would make the grain boundary areas less corrosion resistant. Stainless Steel 316 Hex Head Screws will be less susceptible to sensitization, a condition caused when carbon combines with chromium around the grain boundaries, thereby depleting the grain boundary areas of chromium. Sensitization occurs with heating into the 800 Degree F to 1300 Degree F region, so Stainless Steel 316L Socket Head Cap Screws is a welding or annealing problem.

Stainless Steel 316 Screw

If you use a Stainless Steel 316 Socket Set Screws with high carbon content the welds may crack spontaneously as they cool down from the welding, where this type of cracking is known as “hot brittleness”. In other words, Stainless Steel 316L Anchors Screws is more resistant to intergranular corrosion. However, this is only an issue if Stainless Steel 316 Blind Rivet Screws needs to be welded over a period of several minutes or it’s heated to temperatures between the ranges 425 Degree C – 815 Degree C.

Overall, Stainless Steel 316L Concrete Screws are highly durable, corrosion resistant, and perform well under high stress conditions. If you’re looking for a cheaper material, Stainless Steel 316 Threaded Screws are physically similar to the 316s (slightly less durable) but cost a little less. If you’re looking for highest durability, Stainless Steel 316L Steel Shoulder Screws have a higher molybdenum content, which increases their overall corrosion resistance.

SS 316-316L Screws Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M33
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

316 – 316L Stainless Steel Screw Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
316 – 316L min. – – – – – 16.0 2.0 10.0 –
max. 0.08 2.0 0.75 0.045 0.03 18.0 3.0 14.0 0.10

Stainless Steel 316 – 316L Screw Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
316 – 316L 515 205 40 95 217

Stainless Steel 316 – 316L Screw Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
316 – 316L 8000 193 15.9 16.2 17.5 16.3 21.5 500 740

SS 316-316L Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

316-316L Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-22T18:39:37+05:30March 8th, 2022|

Stainless Steel 310H Screw Manufacturers In India

Stainless Steel 310H Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 310H Screw, which has been serving the needs of the oil and gas industries, automotive, shipbuilding, power plants. We are pride in providing a whole range of high – class, customizable and innovative Stainless Steel 310H Hex Head Screws using state – of – art technology. Stainless Steel 310H Socket Head Cap Screws (UNS S31009) has a carbon content restricted to exclude the lower end of the 310 range. This makes Stainless Steel 310H Socket Set Screws the grade of choice for high temperature applications.

Stainless Steel 310H Screw

Stainless Steel 310H Anchors Screws has good resistance to oxidation at temperatures of up to 1040 Degree C (1904 Degree F) in intermittent service and 1150 Degree C (2102 Degree F) in continuous service. If any special requirement arises, we have facility for hardening, tempering & annealing of Stainless Steel 310H Blind Rivet Screws for required Mechanical & Physical properties. All the supply records for most of the severe environment Stainless Steel 310H Concrete Screws indicate that we are the leader in line pipe technologies.

Our range finds applications for Stainless Steel 310H Threaded Screws in numerous industries and is offered in sizes as per the clients requirements. Stainless Steel 310H Steel Shoulder Screws is second in importance to 304 Stainless Steel amongst the austenitic alloys. Stainless Steel 310H Panel Screws is the low carbon version of 316 Stainless Steel and is immune from sensitization.

SS 310H Screws Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M33
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

310H Stainless Steel Screw Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
310H min. 0.04 – – – – 24.0 – 19.0 –
max. 0.10 2.0 1.00 0.045 0.03 26.0 21.0 –

Stainless Steel 310H Screw Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
310H 515 205 40 95 217

Stainless Steel 310H Screw Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
310H 8000 193 17.2 17.8 18.4 16.2 21.5 500 720

Equivalent Grades for 310H Stainless Steel Screw

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
310H S31009 – – – – – –

SS 310H Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

310H Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-03-13T15:54:53+05:30March 8th, 2022|
LOGO 1200 X 300

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top