LOGO 1200 X 300

nut screw size chart pdf

Inconel 718 Screw Manufacturers In India

Inconel 718 Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Inconel 718 Screw to the customers, where we also offer the same at reasonable rates. Inconel 718 Hex Head Screws combines high strength and corrosion resistance by means of exceptional weldability, comprising resistance to post – weld cracking. Inconel 718 Socket Cap Head Screws has outstanding weldability when associated to the nickel-base super alloys hard – bitten by titanium and aluminum.

Inconel 718 Screw

Inconel 718 Socket Set Screws is a nickel-based super alloy that is well appropriate for uses necessitating soaring potency in temperature series from cryogenic till 1400 Deg F. Inconel 718 Anchore Screws (UNS N07718) is a Chromium – Nickel alloy being precipitation harden able and having soaring creep – rupture potency at elevated temperatures to approximately 1290 Deg F. Meanwhile, these Inconel 718 Blind Rivet Screws are also being offered in different sizes and shapes to our customers. Inconel 718 Concrete Screws possesses long time strength and toughness at higher temperature along with confinement of corrosion resistance up to high temperature.

Inconel 718 Threaded Screws is also used for fasteners and instrumentation parts, where prolonged soaking at the forging temperature is not desirable. The room temperature strength of the Inconel 718 Steel Shoulder Screws is substantially increased by precipitation heat treatment. The sluggish precipitation hardening response of these Inconel 718 Panel Screws allows it to be readily welded without hardening or cracking.

Inconel 718 Screws Specifications
Specifications : ASTM B 637 ASME SB 637
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

718 Inconel Alloy Screw Chemical Composition

Grade C Mn Si Fe S Cr Al Ni
718 min. – – – bal – 17.0 0.2 50.0
max. 0.08 0.35 0.35 bal 0.01 21.0 0.8 55.0

Inconel Alloy 718 Screw Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
825 8.14 g/cm3
1400 °C (2550 °F)
Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

Equivalent Grades for 718 Inconel Screw

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 718 N07718 – – 2.4668 – – –

Alloy 718 Screws Application Industries

Off-Shore Oil Drilling Companies
Power Generation
Petrochemicals
Gas Processing
Specialty Chemicals
Pharmaceuticals
Pharmaceutical Equipment
Chemical Equipment
Sea Water Equipment
Heat Exchangers
Condensers
Pulp and Paper Industry

718 Inconel Alloy Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-26T15:56:04+05:30March 21st, 2022|

Inconel 625 Screw Manufacturers In India

Inconel 625 Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Inconel 625 Screw, which are made at our extensive manufacturing entity. The exceptional toughness and strength of these Inconel 625 Hex Head Screws is because of the adding of niobium that acts by means of the molybdenum to harden the alloy’s matrix. Our Inconel 625 Socket Head Cap Screws (UNS N06625) has excellent soaring temperature potency and has outstanding corrosion resistance in an extensive series of corrosive media.

Inconel 625 Screw Manufacturer

These Inconel 625 Socket Set Screws are used in aerospace, marine engineering and chemical processing. Our Inconel 625 Anchore Screws is a super – alloy that holds superior potency characteristics and resistance to high temperatures. These Inconel 625 Blind Rivet Screws is corrosion, oxidation – resistant, nonmagnetic and nickel – based alloy. Meanwhile, our Inconel 625 Concrete Screws are also being offered in different sizes and shapes to our customers. We also offer the same at reasonable price.

At 1800 Degree F, scaling resistance in these Inconel 625 Steel Shoulder Screws becomes a significant factor in service. This holds true at low and high temperatures in our Inconel 625 Panel Screws, but there is a region (923 K to 1148 K) where precipitates form that are detrimental to the creep properties, and thus the strength, of the alloy. These Inconel 625 Machine Screws is being used in such applications as aircraft ducting systems, engine exhaust systems, thrust – reverser systems, and so on.

Inconel Alloy 625 Screws Specifications
Specifications : ASTM B 446 ASME SB 446
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

625 Inconel Alloy Screw Chemical Composition

Grade C Mn Si Fe S Cr2 Al-Ti Ni
625 min. – – – – – 20.0 – 58.0
max. 0.10 0.50 0.50 5.0 0.015 23.0 0.40 –

Inconel Alloy 625 Screw Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
625 Psi – 1,35,000 , MPa -930 Psi – 75,000 , MPa – 517 42.5 – –

Equivalent Grades for 600 Inconel Screw

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 625 N06625 NA 21 NiCr22Mo9Nb 2.4856 NC22DNB4M ХН75МБТЮ NCF 625

Alloy 625 Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

625 Inconel Alloy Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-27T19:22:51+05:30March 19th, 2022|

Inconel 601 Screw Manufacturers In India

Inconel 601 Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Inconel 601 Screw , which is factory-made at par by means of the international quality standards and by making use of superior – grade of alloys and metals. Soaring – speed processes such as milling, turning or grinding, are carried out in Inconel 601 Hex Head Screws using water – based coolants. Inconel 601 Socket Head Cap Screws are very much popular recognized as an engineering material. Inconel 601 Socket Set Screws are used in petro chemical and other procedure machinery. Inconel 601 Anchore Screws is edifice alloy for heat treat furnace components and fixtures such as muffles, flame shields, and annealing tubes.

Inconel 601 Screw

Inconel 601 Blind Rivet Screws recalls its ductility after extended service exposure. The exceptional feature of Inconel 601 Concrete Screws is its resistance to soaring – temperature oxidation. Inconel 601 Threaded Screws is a nickel-chromium alloy with an addition of aluminum for outstanding resistance to oxidation and other forms of high – temperature corrosion. Inconel 601 Steel Shoulder Screws is a nickel – chromium – iron alloy and a general – purpose engineering material for applications that require resistance to heat and corrosion.

Inconel 601 Panel Screws also has high mechanical properties at elevated temperatures. Inconel 601 Machine Screws is often used in Radiant tubes, Heat treating muffles and retorts. Meanwhile, these Inconel 601 Threaded Screws are also being offered in different sizes and shapes to our customers.

Inconel Alloy 601 Screws Specifications
Specifications : ASTM B 166 ASME SB 166
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

601 Inconel Alloy Screw Chemical Composition

Grade C Mn Si Fe S Cr Cu Ni
601 min. – – – Bal – 21.0 – 58.0
max. 0.10 1.0 0.5 Bal 0.015 25.0 1.0 63.0

Inconel Alloy 601 Screw Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
601 Psi – 95,000 , MPa -655 Psi – 45,000 , MPa – 310 40 – –

Equivalent Grades for 600 Inconel Screw

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 601 N06601 NA 49 NiCr23Fe 2.4851 NC23FeA XH60BT NCF 601

Alloy 601 Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

601 Inconel Alloy Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-07T15:28:11+05:30March 19th, 2022|

Inconel 600 Screw Manufacturers In India

Sachiya Steel International is one of the leading Manufacturer And Exporter Of High Quality Inconel 600 Screw, which are recognized for its excellent resistance to temperature and pressure. These Inconel 600 Hex Head Screws (UNS N06600) as well shows exceptional heat resistance. Inconel 600 Socket Head Cap Screws has outstanding resistance to stress – corrosion chloride – ion cracking. Inconel 600 Socket Set Screws has extended been used in the heat handling industry for a lot of the similar functions as Inconel RA330 Fasteners. Inconel 600 Anchors Screws has both cold and hot workability and resistance to normal methods of corrosion.

Inconel 600 Screw

Inconel 600 Blind Rivet is used in a range of corrosion resisting uses. Inconel 600 Bolts has Exceptional Oxidation Resistance. Inconel 600 Concrete Screws has outstanding mechanical characteristics, where we offer the same in finest possible rates. Inconel 600 Threaded Screws is a Nickel / Chromium alloy with good oxidation resistance at high temperatures. Inconel 600 Steel Shoulder Screws is used for furnace components, chemical processing, food processing, sparking electrodes, nuclear engineering, etc.

Inconel 600 Panel Screws has excellent corrosion resistance to both organic and inorganic compounds. However, when sulfur compounds are present as well, or for ammonium hydroxide service, Inconel 600 Machine Screws is suggested. Inconel Alloy 600 Screws is relatively un – attacked by the majority of neutral and alkaline salt solutions and is used in some caustic environments. Meanwhile, these Inconel 600 Threaded Screws are also being offered in different sizes and shapes to our customers.

Inconel Alloy 600 Screws Specifications
Specifications : ASTM B 166 ASME SB 166
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

600 Inconel Alloy Screw Chemical Composition

Grade C Mn Si Fe S Cr Cu Ni
600 min. – – – 6.0 – 14.0 – 72.0
max. 0.15 1.0 0.5 10.0 0.015 17.0 0.5 –

Inconel Alloy 600 Screw Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
600 Psi – 95,000 , MPa -655 Psi – 45,000 , MPa – 310 40 – –

Equivalent Grades for 600 Inconel Screw

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 600 N06600 NA 13 NiCr15Fe 2.4816 NC15FE11M МНЖМц 28-2,5-1,5 NCF 600

Alloy 600 Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

600 Inconel Alloy Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-02T19:28:41+05:30March 17th, 2022|Screw|

Alloy 17-4ph Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy 17-4ph Screw, which is capable of being hardened up to approximately 44 RC when heat treated to condition H900. Strength and toughness desired in Alloy 17-4 PH Hex Head Screws can be manipulated by temperate range in the heat treatment process. Alloy 17-4 PH Socket Head Cap Screws is a precipitation hardening martensitic stainless steel with Cu and Nb / Cb additions, where high strength is maintained to approximately 600 Degree F (316 Degree C). Usually, Alloy 17-4 PH Socket Set Screws is kept at elevated temperatures for an extended time frame, where this allows precipitation to take place.

Alloy 17-4ph Screw

Alloy 17-4 PH Anchors Screws is widely used in the aerospace, chemical, petrochemical, food processing, paper and general metalworking industries. Alloy 17-4 PH Blind Rivet Screws can be heat treated to a variety of temperatures to develop a wide range of properties.

Mechanical properties of Alloy 17-4 PH Concrete Screws can be optimized with heat treatment, where very high yield strength up to 1100 MPa – 1300 MPa (160 ksi – 190 ksi) can be achieved. Alloy 17-4 PH Threaded Screws is a precipitation harden able, martensitic stainless steel that delivers an excellent combination of oxidation and corrosion resistance, and is comparable to 304 in most conditions or environments. Alloy 17-4 PH Steel Shoulder Screws is chromium – nickel – copper precipitation hardening stainless steel used for applications requiring high strength and moderate level of corrosion resistance.

Alloy 17-4ph Screw Specifications
Specifications : ASTM A 479 ASME SA 479
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 17-4ph0 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

SS 17-4ph Screw Chemical Composition

SS 17-4ph Ni C Mo Mn Si S Cr
3.00 – 5.00 0.07 0.60 1.50 0.70 0.015 15.0 – 17.0

SS 17-4ph Screw Mechanical Properties

Density Melting Point Yield Strength (PSI)
 Tensile Strength (PSI) Elongation
7.8
 1425 °C
 170 190  10 %

SS 17-4ph Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

17-4ph SS Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 1017-4ph4/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 1017-4ph4 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 1017-4ph4/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 1017-4ph4 3.1 and EN 1017-4ph4 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-05T17:09:09+05:30March 16th, 2022|

Alloy 218 Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy 218 Screw, which is truly an all – purpose metal and is used in many oil and gas industry applications. Alloy 218 Hex Head Screws is an austenitic stainless steel formulated for primary forming into wrought products. Alloy 218 Socket Head Cap Screws offers superior strength and corrosion resistance compared to the other common austenitic stainless steel variations. Alloy 218 Socket Set Screws are essentially used as a Connector between the pipes at the middle. Alloy 218 Anchors Screws is nitrogen strengthened austenitic stainless steel, with outstanding strength and resistance to wear and galling.

Alloy 218 Screw

Alloy 218 Blind Rivet Screws maintains decent strength up to temperatures of 1800 Degree F and has oxidation resistance similar to that of SS 309. Alloy 218 Concrete Screws is considerably stronger than the conventional 300 series stainless steels but the same fabrication equipment and techniques are utilized. Hot forming of these Alloy 218 Threaded Screws should be in the range 1400 Degree F – 2150 Degree F (760 Degree C – 1175 Degree C).

After hot working, anneal Alloy 218 Steel Shoulder Screws by heating to 1725 Degree F and 1850 Degree F for a minimum of 30 minutes per inch of thickness followed by water quench. Also featuring low magnetic permeability, the nickel and copper ingredients in the constitution of these Alloy 218 Panel Screws also makes it resistant to pitting and crevice corrosion.

Alloy 218 Screws Specifications
Specifications : ASTM A 194 ASME SA 194
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 2180 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

Alloy 218 Screw Chemical Composition

Alloy 218 Ni C Mo Mn Si N Cr
9.00 – 8.00 0.10 0.75 9 – 7 4.5 – 3.5 0.18 – 0.08 18 – 16

Alloy 218 Screw Mechanical Properties

Density Melting Point Yield Strength
 Tensile Strength Elongation
8.08
 1425 °C
 379 MPa 724 MPa 35 %

Alloy 218 Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

218 Alloy Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 102184/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 102184 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 102184/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 102184 3.1 and EN 102184 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-07T18:10:21+05:30March 16th, 2022|

AISI 4130 Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality AISI 4130 Screw, is more resistant to stains, corrosion, and rust than ordinary steel. With respect to its efficiency, dimensional precision and durability, these offered AISI 4130 Hex Head Screws are extremely demanded and acclaimed. AISI 4130 Socket Head Cap Screws has a number of superlative features to offer such as No additional impurity, Perfect composition, Assured life, Efficiently delivered, Durable, Cost effective, etc.

AISI 4130 Screw

Being the well – known names in the market, we provide functionally advance the collection of In AISI 4130 Socket Set Screws that are mass – produced with accurateness. We supply and procure extensive variety of AISI 4130 Anchors Screws that are factory – made from qualitative raw material by our trustworthy specialists. Our variety of AISI 4130 Blind Rivet Screws combines outstanding corrosion resistance feature of copper and nickel by means of additional benefit of better power.

Meanwhile, these AISI 4130 Concrete Screws are also being offered in customized sizes and shapes to our customers. Lead additions (0.15 % to 0.35 %) substantially improve machinability of AISI 4130 Threaded Screws by high – speed tool steels. For machining with carbide tools, calcium – treated steels such as AISI 4130 Steel Shoulder Screws are reported to double or triple tool life in addition to improving surface finish. Carburizing grades such as AISI 4130 Panel Screws are used where a tough core and relatively shallow, hard surface are needed.

AISI 4130 Screws Specifications
Specifications : ASTM A 322 ASME SA 322
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 41300 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

AISI 4130 Screw Chemical Composition

AISI 4130 Ni C Mo Mn Si Fe Cu S P Cr
0.50 max 0.28-0.33 0.15-0.25 0.40-0.60 0.15-0.35 97.3-98.22 – 0.025 MAX 0.035 MAX 0.80-1.10

AISI 4130 Screw Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
0.28 2580 460 MPa 560 MPa 20 %

Equivalent Grades for 20 AISI Screw

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
AISI 4130 G41300 1.7218 – 25CrMo4 JIS G4105 BS 970 –

AISI 4130 Screws Application Industries

    • Off-Shore Oil Drilling Companies
    • Power Generation
    • Petrochemicals
    • Gas Processing
    • Specialty Chemicals
    • Pharmaceuticals
    • Pharmaceutical Equipment
    • Chemical Equipment
    • Sea Water Equipment
    • Heat Exchangers
    • Condensers
    • Pulp and Paper Industry

4130 AISI Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 1041304/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 1041304 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 1041304/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 1041304 3.1 and EN 1041304 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-05T15:33:50+05:30March 15th, 2022|

SMO 254 Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality SMO 254 Screw, which has a number of excellent features to offer such as long functional life, durable, reliable performance, etc. SMO 254 Hex Head Screws determines exceptional resistance to pitting, corrosion fatigue unvarying corrosion and crevice corrosion stress cracking. Some usual applications of SMO 254 Socket Head Cap Screws are marine environment, off shore, and in chemical industries. By means of high levels of molybdenum, nitrogen and chromium, SMO 254 Socket Set Screws (UNS S31254) suitable for soaring chloride atmospheres such as seawater, brackish water, pulp mill bleach plants and other elevated chloride method streams.

SMO 254 Screw

Meanwhile, these SMO 254 Anchors Screws are also being offered in different sizes and shapes to our customers, where we also offer the same at leading market prices. When selecting SMO 254 Blind Rivet Screws, the total system design must be considered to ensure safe, trouble free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance of these SMO 254 Concrete Screws are the responsibilities of the system designer and user.

Because of the similarities among the 6Mo grades, SMO 254 Threaded Screws may be used interchangeably, may be used together and the selection of a specific grade should be based on availability, price, and service. In the sophisticated drop – evaporation test, it is possible to make these SMO 254 Steel Shoulder Screws look superior, depending on precise conditions.

SMO 254 Screws Specifications
Specifications : ASTM A 479 ASME SA 479
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 2540 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

SMO 254 Screw Chemical Composition

SMO 254 Ni C Mo Mn Si Fe Cu S P Cr
17.5 – 18.5
 0.02 max 6 – 6.5
 1 max 0.8 max – 0.5 – 1 0.01 max 0.03 max 19.5 – 20.5

SMO 254 Screw Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.0 g/cm3 1320-1390 ℃ 300 650 35 %

Equivalent Grades for 254 SMO Screw

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS SIS GOST
SMO 254 S31254 1.4547 Z1 CNDU 20.18.06Az X1CrNiMoCuN20-18-7 – 2378 –

SMO 254 Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

254 SMO Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 102544/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 102544 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 102544/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 102544 3.1 and EN 102544 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-01-03T17:55:04+05:30March 15th, 2022|

Alloy 20 Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy 20 Screw, where our complete product collection is used in wide – ranging industrial sectors. Our Alloy 20 Hex Head Screws is a columbium steadied material that merges outstanding corrosion resistance by means of high mechanical features and moderately easy fabrication. These Alloy 20 Socket Head Cap Screws (UNS N08020) is a nickel – chromium – iron based and austenitic super alloy by means of accompaniments of Molybdenum and Copper that offer resistance to hostile atmospheres, crevice corrosion and pitting. Precisely to endure sulfuric acid, molybdenum, copper, nickel and chromium stages of our Alloy 20 Socket Set Screws offer outstanding all – purpose corrosion resistance.

Alloy 20 Screws

Meanwhile, these Alloy 20 Anchors Screws are also being offered in different sizes and shapes to our customers, where we also offer the same at market leading prices. Our Alloy 20 Blind Rivet Screws also proves adequate resistance to nitric acid, concentrated sulfuric acid, dilute acetic acid and naphtha.

At 33 % nickel, these Alloy 20 Concrete Screws has practical immunity to chloride stress corrosion cracking. Our Alloy 20 Threaded Screws is often chosen to solve stress corrosion cracking problems, which may perhaps occur with 316L stainless. These Alloy 20 Panel Screws is normally used in the annealed condition, where annealing is done at 1800 Degree F – 1850 Degree F (982 Degree C – 1010 Degree C) / for a time commensurate with section size.

Alloy 20 Screws Specifications
Specifications : ASTM B 366 ASME SB 366
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

Alloy 20 Screw Chemical Composition

Alloy 20 Ni C Mo Mn Si Fe Cu S P Cr
32 – 38 0.02 max 2 – 3 1 – 2 0.7 max Bal 3 – 4 0.005 max 0.02 max 19 – 21

Alloy 20 Screw Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.1 g/cm3 1443 °C (2430 °F) Psi – 35000 , MPa – 241 Psi – 80000 , MPa – 551 30 %

Equivalent Grades for 20 Alloy Screw

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Alloy 20 N08020 2.4660 Z2NCUD31-20AZ NiCr20CuMo – – –

Alloy 20 Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

20 Alloy Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-05T17:26:22+05:30March 14th, 2022|

Stainless Steel 904L Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 904L Screw, which very good balance of strength, oxidation – resistance & fabricability. Wrought forms of Stainless Steel 904L Hex Head Screws are furnished in the solution heat-treated condition unless otherwise specified. Low cutting speeds, rigid tools and work piece, heavy equipment, ample coolant and positive feeds are general recommendations for Stainless Steel 904L Socket Head Cap Screws. Annealing of Stainless Steel 904L Socket Set Screws at temperatures lower than the solution heat – treating may cause precipitation of secondary phases. Two criteria for evaluating oxidation resistance of Stainless Steel 904L Anchors Screws are weight change and depth of corrosion penetration.

Stainless Steel 904L Screw

Stainless Steel 904L Blind Rivet Screws excels in both respects due to the formation of a protective, tenacious oxide film. Stainless Steel 904L Concrete Screws can be welded by both manual and automatic methods including shielded metal arc, gas tungsten arc, gas metal arc and submerged arc processes.

Close tolerances, speedy shipping and friendly customer support to manufacture Stainless Steel 904L Threaded Screws have helped earn the certified technicians here a berth as the nation’s foremost supplier of custom alloys. It is important to note that Stainless Steel 904L Steel Shoulder Screws meet the critical ASME Boiler and Pressure Vessel Code, along with other industry standards. Welding of Stainless Steel 904L Panel Screws is possible to perform following any manual or automatic welding procedures.

SS 904L Screws Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

904L Stainless Steel Screw Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
904L min. – – – – – 19.0 4.00 23.00 0.10
max. 0.20 2.00 1.00 0.045 0.035 23.0 5.00 28.00 0.25

Stainless Steel 904L Screw Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
904L 490 220 35 70-90 typical –

Stainless Steel 904L Screw Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
904L 8000 200 15.0 – – 13.0 – 500 850

Equivalent Grades for 904L Stainless Steel Screw

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
904L N08904 904S13 X1NiCrMoCu25-20-5 1.4539 – – SUS 890L

SS 904L Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

904L Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-21T18:59:20+05:30March 14th, 2022|
LOGO 1200 X 300

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top