Sachiya Steel International

Male Fittings connectors

Brass Tube to Male Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Brass Tube to Male Fittings, which resists most oxidizing acids and can withstand all ordinary rusting. There is little overall difference in corrosion resistance among of Brass Tube Fittings, but slight differences in chemical composition do make certain grades more resistant than others do against particular chemicals or atmospheres. Brass Compression Fittings is non – magnetic steel which cannot be hardened by heat treatment, but instead must be cold worked to obtain higher tensile strengths.

Brass Tube to Male Fittings Manufacturer In India | Brass Tube to Male Fittings Manufacturer In Mumbai | Brass Tube to Male Fittings Exporter In India| Brass Tube to Male Fittings Exporter In Mumbai | Brass Tube to Male Fittings Supplier In India | Brass Tube to Male Fittings Supplier In Mumbai | Brass Tube to Male Fittings Stockist In India | Brass Tube to Male Fittings Stockist In Mumbai
Brass Tube to Male Fittings

Brass Tube to Male Fittings

Brass Compression Tube Fittings has superior corrosion resistance and is generally nonmagnetic, along with harden able only by cold working. Brass Male Connector Fittings is immune to foodstuffs, sterilizing solutions, most of the organic chemicals and dyestuffs, and a wide variety of inorganic chemicals. Because of its ability to withstand the corrosive action of various acids found in fruits, meats, milk, and vegetables, Brass Ferrule Fittings is used for sinks, table tops, coffee urns, stoves, refrigerators, milk and cream dispensers, and steam tables.

Brass Double Ferrule Fittings are not ideal in temperature range 427 Degree C – 816 Degree C where precipitation of chromium carbides occurs. Due to layer – wise building method, Brass Ferrule Tube Fittings have a certain anisotropy which could be seen from mechanical properties. Generally, machining characteristics of Brass Double Ferrule Tube Fittings are similar to those of austenitic stainless steels.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Brass Tube to Male Pipes Fittings Specifications
Specifications : ASTM B135 ASME SB135 / ASTM B36 ASME SB36
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Brass, 300/1000/3000PSI
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Brass Tube to Male Pipes Fitting Chemical Composition
Brass Cu Fe Pb Zn
Min./Max. 60.0-63.0 0.35 2.5-3.0 Rem.
Nominal 61.5 – 2.7 35.4
Brass Tube to Male Pipes Fitting Physical Properties
Properties US Customary
Melting Point -Liquidus 1650 F
Melting Point -Solidus 1630 F
Density 0.307 lb/in3at 68 F
Electrical Resistivity 39.90 ohms – cmil/ft @ 68 F
Electrical Conductivity 26 %IACS @ 68 F
Thermal Conductivity 67 Btu · ft/(hr · ft2·oF)at 68F
Modulas of Elasticity in Tension 14000 ksi
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Brass Tube to Male Pipes Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Brass Tube to Male Pipes Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Brass Tube to Male Fittings
Brass Tube to Male Fittings Manufacturer 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Brass Tube to Male Fittings, which resists most oxidizing acids and can withstand all ordinary rusting. There is little overall difference in corrosion resistance among of Brass Tube Fittings, but slight differences in chemical composition do make certain grades more resistant than others do against particular chemicals or atmospheres.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-11-26T11:11:36+05:30November 26th, 2021|

Copper Tube to Male Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Copper Tube to Male Fittings, which is available in different shapes, sizes and designs as per requirements given by the clients. These Copper Tube Fittings is a chemical element in the carbon group, where it is a soft and malleable metal and is regarded as both heavy metal and poor metal. Our firm specializes in trading and supplying a quality array of Copper Compression Tube to Male Fittings, which is offered at market leading prices. We are one of the distinguished organizations that are engaged in manufacturing, supplying and exporting a qualitative gamut of these Copper Male Connector Fittings, which are available in different sizes and shapes for our clients.

Copper Tube to Male Fittings Manufacturer In India | Copper Tube to Male Fittings Manufacturer In Mumbai  |Copper Tube to Male Fittings Exporter In India | Copper Tube to Male Fittings Exporter In Mumbai | Copper Tube to Male Fittings Supplier In India | Copper Tube to Male Fittings Supplier In Mumbai | Copper Tube to Male Fittings Stockist In India  |Copper Tube to Male Fittings Stockist In Mumbai
Copper Tube to Male Fittings

Copper Tube to Male Fittings

With the help of our procurement agents, we have been able to trade and supply a comprehensive assortment of our Copper Ferrule Tube to Male Fittings, which are available in customized sizes and shapes for our patrons. These Copper Double Ferrule Tube to Male Fittings is designed by the skilled professionals with the help of progressive technology and using quality approved components as per the set industry standards.

New technologies like laser welding are used to manufacture our advanced Copper Compression Tube Fittings as they are of superior quality and more. Our company has achieved a milestone in offering these Copper Male Connector Tube Fittings to the clients, which are extruded, cold drawn & annealed.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Copper Tube to Male Pipes Fittings Specifications
Specifications : ASTM B280 ASME SB280 / ASTM B68 ASME SB68
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Copper, 300/1000/3000PSI
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Copper Tube to Male Pipes Fitting Chemical Composition
Standard Copper NO. Chemical Composition Mechanical Properties
CU% P% Temper Tensile strength (Mpa) Elongation (%) Average Grain Size (mm)
ASTM
B280/68		 C12200 >99.9 0.015 to 0.040 >60 >205 >40 >0.040
>50 >245
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Copper Tube to Male Pipes Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Copper Tube to Male Pipes Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Copper Tube to Male Fittings
Copper Tube to Male Fittings 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Copper Tube to Male Fittings, which is available in different shapes, sizes and designs as per requirements given by the clients. These Copper Tube Fittings is a chemical element in the carbon group, where it is a soft and malleable metal and is regarded as both heavy metal and poor metal.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-11-25T10:57:08+05:30November 25th, 2021|

Cupro Nickel 70 Tube to Male Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Cupro Nickel 70 Tube to Male Fittings, which contain a unique summary of data relating to the physical and mechanical properties of the materials and low, ambient and elevated temperatures which is not available elsewhere. The alloying elements in Copper Nickel 70 / 30 Tube Fittings do not get homogenized even by repeated thermal and mechanical treatments. Available in various sizes, thicknesses and specifications, Copper Nickel 70 / 30 Compression Fittings are largely used in various industries.

Cupro Nickel 70 Tube to Male Fittings

Cupro Nickel 70 Tube to Male Fittings

Cupro Nickel 70 Tube to Male Fittings Manufacturer In India | Cupro Nickel 70 Tube to Male Fittings Manufacturer In Mumbai |Cupro Nickel 70 Tube to Male Fittings Exporter In India | Cupro Nickel 70 Tube to Male Fittings Exporter In Mumbai | Cupro Nickel 70 Tube to Male Fittings Supplier In India| Cupro Nickel 70 Tube to Male Fittings Supplier In Mumbai | Cupro Nickel 70 Tube to Male Fittings Stockist In India | Cupro Nickel 70 Tube to Male Fittings Stockist In Mumbai

Copper Nickel 70 / 30 Male Connector Fittings are amongst the most necessary materials needed to provide the means to keep homes, commerce and industry running. Backed by latest technologies and dexterous workforce, we are able to manufacture, supply and export an impeccable gamut of Copper Nickel 70 / 30 Ferrule Fittings, which is also available in customized sizes and shapes for our esteemed clients.

We are one of the leading manufacturers, exporters and suppliers of a premium quality assortment of Copper Nickel 70 / 30 Double Ferrule Fittings, is stronger than the more common copper nickel 70/30 and is able to withstand corrosion at higher velocities in marine applications, making it the favorable choice in submarine systems. In desalination plants, Copper Nickel 70 / 30 Compression Tube Fittings are used in brine heaters, heat rejection and recovery, and in evaporator tubing.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cupro Nickel 70/30 Tube to Male Fittings Specifications
Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
 : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Nickel, 300/1000/3000PSI for Brass
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cu-Ni 70/30 Tube To Male Fittings Chemical Composition
Grade Cu Mn Pb Ni Fe Zn
Cupro Nickel 70/30 65 min 1.0 max 0.05 max 29-33 max 0.4-1.0 max 1 max
Cupro Nickel 70/30 Tube To Male Fittings Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
0.323 lb/in3 at 68 F 2260 F 50000 psi 20000 psi 30 %
Equivalent Grades for 70/30 Cupro Nickel Ferrule Fitting Tube To Male Fittings
STANDARD WERKSTOFF NR. UNS
Cupro Nickel 70/30 2.0882 C71500
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cu-Ni 70/30 Tube To Male Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Cupro Nickel 70/30 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cupro Nickel 70 Tube to Male Fittings
Cupro Nickel 70 Tube to Male Fittings 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Cupro Nickel 70 Tube to Male Fittings, which contain a unique summary of data relating to the physical and mechanical properties of the materials and low, ambient and elevated temperatures which is not available elsewhere.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-11-25T10:41:41+05:30November 25th, 2021|

Cupro Nickel 90 Tube to Male Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Cupro Nickel 90 Tube to Male Fittings, where we are made these for utilizing superb raw materials. Typically, Cu-Ni 90 / 10 Tube Fittings is used as sea water condenser systems and desalination plants owing to good resistance against sea water corrosion and also for pipe work in chemical plants. Cupro Nickel 90 / 10 Compression Fittings are a copper-nickel alloy with an alpha – phase structure, which exhibits superior corrosion resistance in seawater.

Cupro Nickel 90 Tube to Male Fittings Manufacturer In India | Cupro Nickel 90 Tube to Male Fittings Manufacturer In Mumbai | Cupro Nickel 90 Tube to Male Fittings Exporter In India | Cupro Nickel 90 Tube to Male Fittings Exporter In Mumbai  | Cupro Nickel 90 Tube to Male Fittings Supplier In India  | Cupro Nickel 90 Tube to Male Fittings Supplier In Mumbai  | Cupro Nickel 90 Tube to Male Fittings Stockist In India 
Cupro Nickel 90 Tube to Male Fittings

Cupro Nickel 90 Tube to Male Fittings

Copper Nickel 90 / 10 Ferrule Tube Fittings are used in the Heat exchangers, Desalination for its very good corrosive resistance. Furthermore, Cu-Ni 90 / 10 Double Ferrule Tube Fittings is resistant to bio-fouling pro viding various economic benefits, and is relatively insensitive to stress corrosion. Cupro Nickel 90 / 10 Male Connector Fittings contain 90 % copper and differ in strength and maximum sea water velocity levels they can handle but it is also the more economic and extensively used.

Copper Nickel 90 / 10 Compression Tube Fittings is often used in Condensers, Condenser Plates, Evaporator Tubes , Ferrules , Heat Exchanger Tubes, Corrosion Resistance, Petrochemicals, Salt Water, Erosion and Impingement, Moderate Strength, Retains Strength at High Temperatures. Cu-Ni 90 / 10 Male Connector Tube Fittings has nominal temperature coefficient of electric resistance, which is suitable for Marine condenser tube installations in place of Aluminum Brass, especially where higher water velocities are encountered.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cupro Nickel 90/10 Tube to Male Fittings Specifications
Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
 : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Nickel, 300/1000/3000PSI for Brass
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cu-Ni 90/10 Tube To Male Fittings Chemical Composition
Grade Cu Mn Pb Ni Fe Zn
Cupro Nickel 90/10 88.6 min 1.0 max 0.05 max 9-11 max 1.8 max 1 max
Cupro Nickel 90/10 Tube To Male Fittings Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
0.323 lb/in3 at 68 F 2260 F 50000 psi 20000 psi 30 %
Equivalent Grades for 90/10 Cupro Nickel Ferrule Fitting Tube To Male Fittings
STANDARD WERKSTOFF NR. UNS
Cupro Nickel 90/10 2.0872 C70600
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cu-Ni 90/10 Tube To Male Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Cupro Nickel 90/10 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cupro Nickel 90 Tube to Male Fittings
Cupro Nickel 90 Tube to Male Fittings 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Cupro Nickel 90 Tube to Male Fittings, where we are made these for utilizing superb raw materials. Typically, Cu-Ni 90 / 10 Tube Fittings is used as sea water condenser systems and desalination plants owing to good resistance against sea water corrosion and also for pipe work in chemical plants

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-11-24T11:16:30+05:30November 24th, 2021|

Titanium Gr 5 Tube to Male Fittings Manufacturers In India

Sachiya Steel International is one of the leading Manufacturer And Exporter Of High Quality Titanium Gr 5 Tube to Male Fittings, which is used for a range of applications in the aerospace, marine, power generation and offshore industries. In chemical milling, Titanium Grade 5 Tube Fittings is meant to remove the alpha case created when the metal touches the ceramic shell. Titanium Grade 5 Compression Fittings is becoming increasingly utilized in other industries as well, from petrochemical applications to sporting goods. Titanium Grade 5 Male Connector Fittings is often used as a heat barrier because titanium stops the heat and does not transfer to the rest of the assembly.

Titanium Gr 5 Tube to Male Fittings

Titanium Grade 5 Ferrule Tube Fittings offers its high strength at a light weight, useful formability and high corrosion resistance. Titanium Grade 5 Double Ferrule Tube Fittings which contain neutral alloying elements (such as tin) and / or alpha stabilizers (such as aluminum or oxygen) only. Grade 5 Titanium Compression Tube Fittings has excellent resistance to corrosion in seawater making it a good choice for use in offshore and subsea oil & gas operations where seawater corrosion and weight are concerns.

Grade 5 Titanium Male Connector Tube Fittings is often used in rocket engine cases; helicopter rotor hubs and critical forgings requiring high strength – to – weight ratios. Grade 5 Titanium Ferrule Tube Fittings offers excellent resistance to a lot of marine and offshore oil & gas environments.

Titanium Gr 5 Tube to Male Fittings Specifications
Specifications : ASTM B381 ASME SB381
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
 : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B381 ASTM B381
Pressure Rating : 6000PSI for Titanium , 300/1000/3000PSI for Brass

Titanium Alloy Gr 5 Tube To Male Fittings Chemical Composition

Grade Ti C Fe H N O Al V
Ti Grade5 90 min – 0.25 max – – 0.2 max 6 min 4 min

Titanium Gr 5 Tube To Male Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 5 4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 %

Equivalent Grades for Gr 5 Titanium Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS
Titanium Gr. 5 3.7165 N56400

Ti. Alloy Gr 5 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Titanium Gr 5 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-20T17:53:15+05:30November 24th, 2021|

Titanium Gr 2 Tube to Male Fittings Manufacturers In India

Titanium Gr 2 Tube to Male Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Titanium Gr 2 Tube to Male Fittings, where strong reducing media may cause heavy corrosion. Titanium Grade 2 Tube Fittings has the highest formability, along with the highest strength and moderate formability. Titanium Grade 2 Compression Fittings shares many of the same qualities as Grade 1 titanium, but it is slightly stronger, but both are equally corrosion resistant. Comparable to austenitic stainless steel, the low speed, heavy feed rate and abundant cutting fluid, Employ safety measures of Titanium Grade 2 Ferrule Fittings are excellent because titanium is extremely combustible.

Titanium Gr 2 Tube to Male Fittings

This mixture has a solid solubility which varies dramatically with temperature, allowing Titanium Grade 2 Double Ferrule Fittings to undergo precipitation strengthening. Titanium Grade 2 Male Connector Fittings is alloyed titanium and is considered to be an alpha – beta alloy. Annealing of Grade 2 Titanium Tube Fittings can be performed under high vacuum, under argon after careful purging of the recipient or in air. This combination of properties makes Grade 2 Titanium Compression Fittings a candidate for a large variety of chemical and marine as well as aerospace and medical applications.

Grade 2 Titanium Male Connector Fittings is the most commonly used grade of titanium, where further it has good weldability and is easily formable. Grade 2 Titanium Ferrule Fittings is classified by its corrosion resistance, ductility, and strength, where low cutting speeds, heavy feed rates, sharp tools, and ample cutting fluid are prescribed.

Titanium Gr 2 Tube to Male Fittings Specifications
Specifications : ASTM B381 ASME SB381
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
 : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B381 ASTM B381
Pressure Rating : 6000PSI for Titanium , 300/1000/3000PSI for Brass

Titanium Alloy Gr 2 Tube To Male Fittings Chemical Composition

Grade Ti C Fe H N O Al V
Ti Grade2 99.2 min 0.1 max 0.3 max 0.015 max 0.03 max 0.25 max – –

Titanium Gr 2 Tube To Male Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 2 4.5 g/cm3 1665 °C (3030 °F) Psi – 49900 , MPa – 344 Psi – 39900 , MPa – 275 20 %

Equivalent Grades for Gr 2 Titanium Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS
Titanium Gr. 2 3.7035 R50400

Ti. Alloy Gr 2 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Titanium Gr 2 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-03-26T12:16:13+05:30November 23rd, 2021|

Super Duplex Steel S32750 Tube to Male Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Super Duplex Steel S32750 Tube to Male Fittings, where the specialists working in the company of us make use of superior quality of machinery and cutting – edge methodologies to make the accessible variety of products. Our Super Duplex Steel S32760 Tube Fittings is generally being used in Shipbuilding and Marine Industry: such as in Shafts and Propellers, Rudders, Pumps, Shaft Seals, Valves, Instrumentation, Bolts and Fasteners, Oil and Chemical Tankers. The duplex microstructure offers these Super Duplex Steel S32750 Tube Fittings a low constant of thermal growth and advanced heat conductivity than austenitic steels and is in fact appropriate for functioning temperatures till temperature 300 Deg C.

Super Duplex Steel S32750 Tube to Male Fittings

Meanwhile, our Super Duplex S32760 Male Connector Fittings are as well being offered in different sizes, designs and shapes to our customers. The cooling speed of these Super Duplex Steel S32750 Male Connector Fittings from the welding heat has a very great impact on the austenite – ferrite ratio that is produced at room temperature.

Thus a retarded cooling in our Super Duplex S32760 Compression Fittings leads to higher austenite content than rapid cooling, after which up to 90 % ferrite is to be expected. Depending on the welding procedure and the seam geometry, these Super Duplex S32750 Compression Fittings is possible to influence the ferrite / austenite ratio in this way.

Super Duplex Steel S32750/ S32760 Tube to Male Fittings Specifications
Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
 : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Super Duplex Steel , 300/1000/3000PSI for Brass

Super Duplex S32750/ S32760 Tube To Male Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N Fe
S32750 0.030 max 1.20 max 0.80 max 0.035 max 0.020 max 24.00 – 26.00 3.00 – 5.00 6.00 – 8.00 0.24 – 0.32 58.095 min
S32760 0.05 max 1.00 max 1.00 max 0.030 max 0.010 max 24.00 – 26.00 3.00 – 4.00 6.00 – 8.00 0.20 – 0.30 57.61 min

Super Duplex Steel S32750/ S32760 Tube To Male Fittings Mechanical Properties

Grades Density (g/cm 3) Density (lb/in 3) Melting Point (°C) Melting Point (°F)
S32750 / S32760 7.8 0.281 1350 2460

Equivalent Grades for S32750/ S32760 Super Duplex Steel Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS
Super Duplex 2507 1.4410 S32750 / S32760

Super Duplex S32750/ S32760 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Super Duplex Steel S32750/ S32760 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-21T12:06:45+05:30November 23rd, 2021|

Nickel Alloy 201 Tube to Male Fittings Manufacturers In India

Nickel Alloy 201 Tube to Male Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Tube to Male Fittings, which is the higher carbon version of the alloy. Nickel 201 Tube Fittings has slightly improved corrosion resistance over stainless steel in strongly oxidizing environments. Nickel 201 Compression Fittings is also advantageous for high temperature service because of its good mechanical properties. Nickel 201 Male Connector Fittings offers higher creep and stress rupture properties than Alloy 304.

Nickel Alloy 201 Tube to Male Fittings

Nickel 201 Ferrule Fittings particularly might also be considered for exposures where sensitization and inter – granular corrosion are concerns. Nickel 201 Double Ferrule Fittings is a columbium (niobium) / tantalum stabilized austenitic chromium – nickel stainless steel which was developed to provide an 18 / 8 type alloy with improved inter – granular – corrosion resistance. Ni 201 Tube Fittings has a slightly improved corrosion resistance over other alloys of stainless steel in strongly oxidizing environments as a result of the addition of columbium (niobium) and tantalum.

Ni 201 Compression Fittings was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C). In most instances, the carbon content of Ni 201 Male Connector Fittings enables dual certification. Ni 201 Ferrule Fittings does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid. Ni 201 Double Ferrule Fittings cannot be hardened by heat treatment, only by cold working.

Nickel 201 Tube to Male Fittings Specifications
Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
 : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Nickel, 300/1000/3000PSI for Brass

Nickel Alloy 201 Tube To Male Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni
Nickel 201 0.02 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel 201 Tube To Male Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 201 Nickel Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 – LC-Ni 99

Alloy 201 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel 201 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-13T12:51:29+05:30November 22nd, 2021|

Duplex Steel S31803 Tube to Male Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Duplex Steel S31803 Tube to Male Fittings, which has some exceptional features to offer such as fine finish, high tensile potency, rust – resistant, etc. These Duplex Steel S31803 Tube Fittings demonstrates exceptional fatigue potency, in addition to exceptional resistance to stress corrosion cracking, crevice, erosion, general corrosion and pitting in severe atmospheres. The construction of our Duplex Steel S32205 Compression Fittings contains of austenite pools enclosed by an incessant ferrite stage.

Duplex Steel S31803 Tube to Male Fittings Manufacturer In India | Duplex Steel S31803 Tube to Male Fittings Manufacturer In Mumbai | Duplex Steel S31803 Tube to Male Fittings Exporter In India| Duplex Steel S31803 Tube to Male Fittings Exporter In Mumbai| Duplex Steel S31803 Tube to Male Fittings Supplier In India | Duplex Steel S31803 Tube to Male Fittings Supplier In Mumbai | Duplex Steel S31803 Tube to Male Fittings Stockist In India | Duplex Steel S31803 Tube to Male Fittings Stockist In Mumbai
Duplex Steel S31803 Tube to Male Fittings

Duplex Steel S31803 Tube to Male Fittings

These Duplex Steel S31803 Ferrule Fittings is about twice over the yield potency of customary austenitic stainless steel grades. Our Duplex Steel S32205 Double Ferrule Fittings soaring temperature power is parallel to SS 430 in the array of 950 Deg C to 1150 Deg C. Meanwhile, these Duplex Steel S31803 Male Connector Fittings are also being offered in different sizes and shapes to our customers. Due to the possibility that other undesired metallic phases could arise in our Duplex Steel S32205 Male Connector Fittings, so further cooling down to 300 Degree C should be undertaken as quickly as possible.

These Duplex Steel S31803 Double Ferrule Tube Fittings can be welded according to the processes generally used for highly alloyed steels, i.e. the following procedures or combinations can always be used: submerged arc welding, TIG process, plasma welding, metal – active gas process, laser beam welding, and electron beam welding.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Duplex Steel S31803 / S32205 Tube to Male Fittings Specifications
Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
 : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Duplex Steel , 300/1000/3000PSI for Brass
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Duplex S31803 / S32205 Tube To Male Fittings Chemical Composition
Grade C Mn Si P S Cr Mo Ni N Fe
S31803 0.030 max 2.00 max 1.00 max 0.030 max 0.020 max 22.0 – 23.0 3.0 – 3.5 4.50 – 6.50 0.14 – 0.20 63.72 min
S32205 0.030 max 2.00 max 1.00 max 0.030 max 0.020 max 21.0 – 23.0 2.50 – 3.50 4.50 – 6.50 0.8 – 0.20 63.54 min
Duplex Steel S31803 / S32205 Tube To Male Fittings Mechanical Properties
Grades Density (g/cm 3) Density (lb/in 3) Melting Point (°C) Melting Point (°F)
S31803 / S32205 7.805 0.285 1420 – 1465 2588 – 2669
Equivalent Grades for S31803 / S32205 Duplex Steel Ferrule Fitting Tube To Male Fittings
STANDARD WERKSTOFF NR. UNS
Duplex 2205 1.4462 S31803 / S32205
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Duplex S31803 / S32205 Tube To Male Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Duplex Steel S31803 / S32205 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Duplex Steel S31803 Tube to Male Fittings
Duplex Steel S31803 Tube to Male Fittings 2

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Duplex Steel S31803 Tube to Male Fittings, which has some exceptional features to offer such as fine finish, high tensile potency, rust – resistant, etc.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-11-22T10:39:43+05:30November 22nd, 2021|

Nickel Alloy 200 Tube to Male Fittings Manufacturers In India

Nickel Alloy 200 Tube to Male Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Tube to Male Fittings, which has some outstanding quality of attributes such as durable, fine finish, dimensionally constant, and so on. These Nickel 200 Tube Fittings (UNS N02200) has a low annealed rigidity and very low work – toughening rate that is needed for cold establishing processes such as spinning, coining, deep drawing, and so on. For the reason that the alloy shows excellent corrosion resistance, our Nickel 200 Compression Fittings has been used in caustic solution, food handling machinery, all – purpose corrosion – resistant components and constructions.

Nickel Alloy 200 Tube to Male Fittings

These Nickel 200 Male Connector Fittings provide corrosion resistance in neutral and reducing media along with in oxidizing environments offered that the oxidizing media permits the establishment of an unreceptive oxide film. Meanwhile, our Nickel 200 Compression Tube Fittings are as well being offered in different sizes and shapes to our customers. These Nickel 200 Ferrule Fittings has a relatively low work – hardening rate, but it can be cold worked to moderately high strength levels while maintaining ductility.

Sachiya Steel International is one of the pioneer stockiest and trader of our quality Nickel 200 Double Ferrule Fittings, which are often required in complex applications, where corrosion and thermal resistance are demanded. These Alloy 200 Male Connector Fittings are nickel and chromium alloys, as well as nickel and molybdenum alloys with high – temperature resistant properties.

Nickel Alloy 200 Tube to Male Fittings Specifications
Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
 : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Nickel, 300/1000/3000PSI for Brass

Nickel Alloy 200 Tube To Male Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni
Nickel 200 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel 200 Tube To Male Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 200 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 200 Nickel Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2

Alloy 200 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel 200 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-13T17:23:24+05:30November 20th, 2021|

SACHIYA STEEL INTERNATIONAL

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top