gi pipe price Archives - Steel Pipes/Tubes Manufacturers, Top Pipe Suppliers


Schedule 40 Galvanized Pipe Exporters, Check latest Jindal Gi Pipe Price List in Mumbai

Sachiya Steel International is One Of The Leading dealer & distributor Jindal make Mild Steel GI Pipes and Tubes. gi pipe price We stock almost all standard sizes and wall thickness. Contact Sachiya Steel International to buy custom sizes Galvanized Iron Pipes. Steel Pipe, coated with a layer of zinc metal, is known as Galvanized steel.

During the Gi Pipe process, the steel is immersed in a molten zinc bath to provide a rigid and uniform barrier. Gi Pipe and tubes for water supply, structural applications and so on. Gi Pipes or galvanizing  is the process of applying protective zinc coating to steel or iron to prevent corrosion. The most common method is hot-dip galvanizing, where the parts are immersed in a molten zinc bath.

Gi Pipes process

Gi Pipe are generally used for the distribution of treated or raw water in rural or urban areas. These pipes are cheaper, lightweight and easy to use. The following details refer to IS 1239 Part 1 below. .

Material Supply:
Supply of steel pipes shall comply with IS 1387.

 

Galvanized Pipe Specification
Application Used for transporting low pressure liquid, gas and heating.
OD 21.3mm ~ 610mm
WT 0.5mm ~ 20mm
Length 0.3mtr ~ 18mtr, Fixed Length, Ramdon Length, SRL, DRL
Standard and Grade GB/T 3091 Q215/Q235/Q195/Q345, BS 1387, EN 39, EN 1139 S275JR/S235JR, ASTM A53 GR. A/B/C, JIS G3444 STK 400/STK 500
Pipe Type Electric Resistance Welded Steel Pipe (Square/Round/Rectangular)
Zinc Coating 10~50 g/m2
Packing Plastic Caps plugged, Steel Strips bundled, Waterproof Paper wrapped etc.
End Square Cut/Threaded, Burr Removed
GI Square Pipes
Minimum Order Quantity 1000 Kilogram
Material Galvanized Iron
Unit Pipe Length 6 m
Color Silver
Shape Round, Square, Rectangular
Size 1/2 inch, 3/4 inch, 1 inch, 2 inch, 3 inch, >3 inch
Unit Length 6m
Size (meter) 1/2″-20″
Thickness (mm) 1-3 mm
GI Steel Pipe
Minimum Order Quantity 1000 Kilogram
Shape Round
Thickness(mm) 1.2 mm – 18 mm
Unit Length (meters) 12 m

The available range of GI Steel Pipe, GI Pipe and GI Square Pipe is made using high-grade steel and latest techniques to offer superior performance and reliability in adverse conditions.

Jindal Gi Pipe Price List

Price list in INR (Indian Currency), Check here latest price for Currency Converter

SIZE (IN/MM) List Rate (Per Meter) RELIABLE PIPES & TUBES PRICE
Offer Price (Per Meter)
1/2″ – 15mm 107.45 82.13
3/4″ – 20mm 138.55 105.91
1″- 25mm 197.95 151.31
1-1/4″- 32mm 247.40 189.11
1-1/2″ – 40mm 299.5 228.94
2″ – 50mm 406.1 310.42
2-1/2″ – 65mm 520.55 397.91
3″ – 80mm 644.25 492.46
4″ – 100mm 926.1 707.91
5″ – 125mm 1153.9 882.04
6″ – 150mm 1375.5 1051.43
Application of GI Steel Pipe
  • Underground piping
  • Overground piping
  • Power
  • Refineries
  • Scaffolding
  • Steel Structures i.e. Airports, Metro Station etc.
  • Fire-fighting systems
  • HVAC
Chemical composition:

The chemical composition of the steel shall comply with Table 1 in the Pot Sample analysis.

Carbon Manganese Sulphur Phosphorus
(1) (2) (3) (4)
0.20 1.30 0.040 0.040

To achieve long-term structural performance in the most demanding weather conditions, designers, builders and consumers have begun to use zinc-coated steel pipes. This is due to the fact that zinc-plated galvanized steel pipes and the pipe withstand wind, water and road salts attacks.

gi pipe price
gi pipe price

In addition to being easy to pocket, Gi pipe are corrosion resistant, lightweight, easy to use during transport and easy to add. Welded pipes shall be manufactured from hot rolled steel strip for welded pipes and pipes in accordance with IS 10748 or cold rolled low carbon steel sheets and strips in accordance with IS-513.

Steel pipes shall be produced by one of the following processes:
Hot finished seamless (HFS)
Cold finished seamless (CDS)
Hot finished welded (HFW)
Electrical resistance welded or high frequency induction welded (ERW or HFIW).

For welded pipes, the height of the inner weld fin shall not exceed 60 percent of the specified wall thickness.

Table 2: Permitted Variation in Product Analysis according to IS 1239 Part 1
SI.No Content variation Over Specified Limit Percent Max
(1) (2) (3)
1) Carbon 0.02
2) Manganese 0.04
3) Sulphur 0.005
4) Phosphorus 0.005

Dimensions:

Table 2: Permitted Variation in Product Analysis according to IS 1239 Part 1

Nominal Bore Outside Diameter Thickness Mass Of Tube
mm Maximum mm Minimum mm mm Plain End

Kg/m

screwed and Socketed

Kg/m

6 10.1 9.7 1.8 0.360 0.363
8 13.6 13.2 1.8 0.515 0.519
10 17.1 16.7 1.8 0.670 0.676
15 21.4 21.0 2.0 0.947 0.956
20 26.9 26.4 2.3 1.38 1.39
25 33.8 33.2 2.6 1.98 2.00
32 42.5 41.9 2.6 2.54 2.57
40 48.4 47.8 2.9 3.23 3.27
50 60.2 59.6 2.9 4.08 4.15
65 76.0 75.2 3.2 5.71 5.83
80 88.7 87.9 3.2 6.72 6.89
100 113.9 113.0 3.6 9.75 10.0
Table 4 Steel Pipes Dimensions and Nominal Mass – Medium to IS 1239 Part 1
Nominal Bore Outside Diameter Thickness Mass Of Tube
mm Maximum mm Minimum mm mm Plain End

kg/mm

Screwed And Socketed Kg/m
6 10.6 9.8 2.0 0.404 0.407
8 14.0 13.2 2.3 0.641 0.645
10 17.5 16.7 2.3 0.839 0.845
15 21.8 21.0 2.6 1.21 1.22
20 27.3 26.5 2.6 1.56 1.57
25 34.2 33.3 3.2 2.41 2.43
32 42.9 42.0 3.2 3.10 3.13
40 48.8 47.9 3.2 3.56 3.60
50 60.8 59.7 3.6 5.03 5.10
65 76.6 75.3 3.6 6.42 6.54
80 89.5 88.0 4.0 8.36 8.53
100 115.0 113.1 4.5 12.2 12.5
125 140.8 138.5 4.8 15.9 16.4
150 166.5 163.9 4.8 18.9 19.5

 

Joints:
All screwed pipes must be supplied with pipe threads in accordance with IS 554. The gauge according to IS 8999 should be regarded as an adequate test for the suitability of IS 554 threads.

Galvanized:
When the tubes need to be galvanized, the zinc coating in the tubes must comply with IS 4736.
The Gi pipe to be screwed must be galvanized before screwing.

 


Mumbai

Headquarters


D-2, Office no. 3, Gr. Floor, Bharat Nagar Society, Grant Road (E), Mumbai – 400007.
+91 9769056007

+91 22 66518863

[email protected][email protected]
LOCATIONS

We Are Everywhere


Gl Pipes

OUR NETWORK india

MumbaiDelhiChennai


About Us

Sachiya Steel International

We are an ISO 9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.

We are an ISO TUV  9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.