Sachiya Steel International

coils

Aluminium Steel Plates Stockist In India

Aluminium Steel Plates Stockist In India

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Aluminium Steel Plates ,Sheets And Coils, which is available at market-leading prices along with customized sizes and shapes for our customers. For applications requiring maximum ductility, our Aluminium 6061 Plates with low Sulphur levels can be supplied by producers using ladle-refining techniques. The easily exchangeable test pipeline of these Aluminium 6082 Coils is filled with the sample and cooled down to a set temperature. In general, wear resistance can be improved by increasing the hardness of our Aluminium 5083 Slating Coils, by specifying an alloy by means of greater carbon content (without increasing hardness), or by both.

Aluminium Steel Plates

These Aluminium 5086 Perforated Coils, which have good mechanical properties both at ambient and elevated temperatures of up to 930 Degree F (500 Degree C), are readily fabricated using common industrial techniques. Low – temperature impact tests (to -50 Degree F) in our Aluminium Steel 5052 Plates are useful for many applications as toughness indicators under various service conditions and temperatures.

Our ability to provide these Aluminium Steel 6063 Coils on a project basis is one of our strongest capabilities and is also unmatched in our industry. Restricted carbon plus columbium stabilization in our Aluminium Steel 7075 Slating Coils permits welded fabrications to be used in corrosive environments, normally without post-weld heat treatment. These Aluminium Steel 1100 Perforated Coils appears to fall between both the stainless and nickel categories as it contains characteristics of both.

Aluminium Steel Plates Specifications
Specifications : ASTM / ASME SB209
Size : 1000 mm x 60610 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 60610 mm x 60610 mm, 60610 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Aluminium Sheets, Plates & Coils Chemical Composition

Alloy %
Si		 %
Mg		 %
Mn		 %
Cu		 %
Fe		 %
Cr		 %
Zn		 %
Ti		 %
Others		 %
Al
EN AW-1050 A 0.25
Max		 0.05
Max		 0.05
Max		 0.05
Max		 0.40
Max		 – 0.07
Max		 0.05
Max		 – 99.5 Min
EN AW-1070 A 0.20
Max		 0.03
Max		 0.03
Max		 0.03
Max		 0.25
Max		 – 0.07
Max		 0.03
Max		 – 99.7 Min
EN AW-1100 Si+Fe 0.95 Max – 0.05 Max 0.05 – 0.20 – – 0.10 Max 0.05 Max – 99.0 Min
EN AW-2011 0.40 Max – – 5.00 – 6.00 0.70 Max – 0.30 Max – Bi : 0.20 – 0.60
Pb : 0.20 – 0.60		 Remainder
EN AW-2014 0.50 – 1.20 0.20 – 0.80 0.40 – 1.20 3.90 – 5.00 0.70 Max 0.10 Max 0.25 Max 0.15 Max – Remainder
EN AW-2024 0.50 Max 1.20 -1.80 0.30 – 0.90 3.80 – 4.90 0.50 Max 0.10 Max 0.25 Max 0.15 Max 0.15 Max Remainder
EN AW-3003 0.60 Max – 1.00 – 1.50 0.05 – 0.20 0.70 Max – 0.10 Max – 0.15 Max Remainder
EN AW-3103 0.50 Max 0.30 Max 0.90 – 1.50 0.10 Max 0.70 Max 0.10 Max 0.20 Max 0.10 Max – Remainder
EN AW-6101A 0.30 – 0.7 0.40 – 0.90 0.03 Max 0.05 Max 0.40 Max – – – 0.10 Max Remainder
EN AW-6005 0.60 – 0.90 0.40 – 0.60 0.10 Max 0.10 Max 0.35 Max 0.10 Max 0.10 Max 0.10 Max – Remainder
EN AW-6351 0.70 – 1.30 0.40 – 0.80 0.40 – 0.80 0.10 Max 0.50 Max – 0.20 Max 0.20 Max 0.15 Max Remainder
EN AW-6060 0.30 – 0.60 0.35 – 0.60 0.10 Max 0.10 Max 0.10 – 0.30 0.05 Max 0.15 Max 0.10 Max – Remainder
EN AW-6061 0.40 – 0.80 0.80 – 1.20 0.15 Max 0.15 – 0.40 0.70 Max 0.04 – 0.35 0.25 Max 0.15 Max – Remainder
EN AW-6063 0.20 – 0.60 0.45 – 0.90 0.10 Max 0.10 Max 0.35 Max 0.10 Max 0.10 Max 0.10 Max – Remainder
EN AW-6082 0.70 – 1.30 0.60 -1.20 0.40 – 1.00 0.10 Max 0.50 Max 0.25 Max 0.20 Max 0.10 Max – Remainder

Mechanical Properties for Aluminium Sheets, Plates & Coils

Alloy Temper UTS (Mpa) Yield Strength (Mpa) Elongation (%)
Minimum Maximum Minimum Maximum A 50mm (Minimum)
EN AW-1050 A F 60 – 20 – 23
O 60 95 20 – 23
EN AW-1070 A F 60 – 20 – 23
EN AW-1100 O 75 110 – – 25
EN AW-2011 T4 275 – 125 – 12
T6 310 – 230 – 6
EN AW-2014 O – 250 – 135 10
T4 370 – 230 – 11
T6 415 – 370 – 5
EN AW-2024 O – 250 – 150 10
T3,T3510,T3511 395 – 290 – 6
T8,T8510,T8511 455 – 380 – 4
EN AW-3003 F 95 – 35 – 20
O 95 135 35 – 20
EN AW-3103 F 95 – 35 – 20
O 95 135 35 – 20
EN AW-6101A T6 200 – 170 – 8
EN AW-6005 T4 180 – 90 – 13
T6 270 – 225 – 6
EN AW-6351 O – 160 – 110 12
T4 205 – 110 – 12
T6 290 – 250 – 6
EN AW-6060 T4 120 – 60 14 12
T5 160 – 120 – 6
T6 190 – 150 – 6
T64 180 – 120 – 10
T66 215 – 160 – 6
EN AW-6061 O – 150 – 110 14
T4 180 – 110 – 13
T6 260 – 240 – 6
EN AW-6063 O – 130 – – 16
T4 130 – 65 – 12
T5 175 – 130 – 6
T6 215 – 170 – 6
T66 245 – 200 – 6
EN AW-6082 O – 160 – 110 12
T4 205 – 110 – 12
T5 270 – 230 – 6
T6 290 – 250 – 6

Physical Property for Aluminium Sheets, Plates & Coils

Physical Property Value
Density 2,70 g/cm³
Melting Point 582 °C
Thermal Expansion 23.4 x 10^-6 /K
Modulus of Elasticity 69 GPa
Thermal Conductivity 170 W/m.K
Electrical Resistivity %43 IACS

Aluminium 6061, 6082, 5083, 5086, 5052 ,6063, 7075, 1100 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Aluminium 6061, 6082, 5083, 5086, 5052 ,6063, 7075, 1100 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-24T19:41:05+05:30June 27th, 2022|

Alloy Steel 20 Plates Stockist In India

Alloy Steel 20 Plates Stockist In India

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Alloy Steel 20 Plates, Sheets and Coils, where we as well deliver quality certain services. Alloy 20 Plates resists chloride ion and pitting corrosion and its content of copper guards it from sulfuric acid improved than a conventional alloy like 316. Alloy 20 Coils is used in Heat exchangers, Mixing tanks, Process piping, and so on. Alloy 20 Slating Coils’ corrosion resistance discovers other uses in the food, pharmaceutical, chemical, plastics, and power generation industries.

Alloy Steel 20 Plates

Alloy 20 Perforated Coils (UNS N08020) is an iron – nickel – chromium austenitic stainless steel that was industrialized for supreme resistance to acid attack, precisely sulfuric acid. Meanwhile, these Carpenter 20 Sheets are also being offered in different sizes and shapes to our customers. Carpenter 20 Plates are made by combining carbon steel with one or several alloying elements, such as manganese, silicon, nickel, titanium, copper, chromium and aluminum.

Sachiya Steel International is one of the well-known trading & stockiest in Carpenter 20 Coils, where the alloying elements tend to form either solid solutions or compounds or carbides. Alloying elements in Carpenter 20 Slating Coils also have an effect on the eutectoid temperature of the steel. Manganese and nickel in Carpenter 20 Perforated Coils lower the eutectoid temperature and are known as austenite stabilizing elements. With enough of these elements in Incoloy 20 Plates, the austenitic structure may be obtained at room temperature.

Alloy 20 Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB 463
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 100 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, No.3, No.4, HL, BA, 8K
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Alloy 20 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Cu Ni Cr Fe Mo P
Alloy 20  0.07 max  2.00 max 1.00 max 0.035 max 3.0-4.0  32.0-38.0 19.0-21.0  29.85 min*  2.0-3.0  0.045 max

Alloy 20 Sheets, Plates & Coils Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
 8.1 g/cm3  1443 °C (2430 °F) Psi -80,000, MPa -551 Psi – 35,000, MPa – 241 30%

Equivalent Grades for 20 Alloy Sheets & Plates

STANDARD WERKSTOFF NR. UNS AFNOR EN
Alloy 20  2.4660  N08020  Z2NCUD31-20AZ  NiCr20CuMo

Alloy 20 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 20 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-05T12:08:07+05:30June 24th, 2022|

Brass Sheets Stockist

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Brass Sheets, Plates, Coils, which are all prone to sigma phase formation if exposed for long periods to a temperature of about 590 Degree C to 870 Degree C. The problem of grain boundary carbide precipitation in Brass Plates was discussed under inter – granular corrosion. This same phenomenon occurs when Brass Coils are exposed in service to temperatures of 425 Degree C to 815 Degree C, resulting in a reduction of corrosion resistance which may be significant.

Brass Sheets Manufacturer In India | Brass Sheets Manufacturer In Mumbai | Brass Sheets Exporter In India | Brass Sheets Exporter In Mumbai | Brass Sheets Supplier In India | Brass Sheets Supplier In Mumbai | Brass Sheets Stockist In India | Brass Sheets Stockist In Mumbai
Brass Sheets

                      Brass Sheets

If this problem is to be avoided the use of stabilized grades such as Brass Slating Coils should be considered. A further problem that Brass Perforated Coils have in high temperature applications is the formation of sigma phase. The formation of sigma phase in Brass Plates is dependent on both time and temperature and is different for each type of steel. In general, Brass Coils is practically immune to sigma phase formation, but not so those grades with higher chromium contents with molybdenum or with higher silicon contents.

Sigma phase embrittlement refers to the formation of a precipitate in the microstructure of Brass Slating Coils over a long period of time within this particular temperature range. Generally, beta – phase Brass Perforated Coils is the more ductile phase and alpha – phase is stronger yet less ductile, due to the larger number of slip planes in the bcc structure of the beta – phase in comparison to the hcp alpha – phase.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Brass Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB 62
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 100 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, No.3, No.4, HL, BA, 8K
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Brass Sheet, Plate & Coil Chemical Composition
Brass Cu Fe Pb Zn
Min./Max. 60.0-63.0 0.35 2.5-3.0 Rem.
Nominal 61.5 – 2.7 35.4
Brass Sheet, Plate & Coil Physical Properties
Properties US Customary
Melting Point -Liquidus 1650 F
Melting Point -Solidus 1630 F
Density 0.307 lb/in3at 68 F
Electrical Resistivity 39.90 ohms – cmil/ft @ 68 F
Electrical Conductivity 26 %IACS @ 68 F
Thermal Conductivity 67 Btu · ft/(hr · ft2·oF)at 68F
Modulas of Elasticity in Tension 14000 ksi
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Brass Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Brass Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Brass Sheets
Brass Sheets

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Brass Sheets, Plates, Coils, which are all prone to sigma phase formation if exposed for long periods to a temperature of about 590 Degree C to 870 Degree C. The problem of grain boundary carbide precipitation in Brass Plates was discussed under inter – granular corrosion. This same phenomenon occurs when Brass Coils are exposed in service to temperatures of 425 Degree C to 815 Degree C, resulting in a reduction of corrosion resistance which may be significant.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2022-06-15T12:22:31+05:30June 15th, 2022|

Copper Sheets Stockist

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Copper Sheets, Plates and Coils, where our market coverage includes both commercial and domestic. In a vast majority of electric furnaces operating today, Copper Coils transfer the electrical power from flexible power cables to electrode heads or contact pads. Copper Plates are ideal for Drinking Water, Central Heating, Sanitation, Hot and Cold Water, Industrial & Medical Gas Transportation, Various Engineering. We have emerged as leading traders & suppliers of premium quality Copper Slating Coils, all over the nation.

Copper Sheets Manufacturer In India | Copper Sheets Manufacturer In Mumbai | Copper Sheets Exporter In India | Copper Sheets Exporter In Mumbai | Copper Sheets Supplier In India | Copper Sheets Supplier In Mumbai | Copper Sheets Stockist In India | Copper Sheets Stockist In Mumbai
Copper Sheets

           Copper Sheets

The main objective of our concern is to satisfy the clients by offering them the top quality products and services of Copper Perforated Coils. Cited are the quality attributes of offered Copper Sheets: High tensile strength, Dimensional accuracy, Fine finishing. Available at most competitive price, our range of Copper Plates is stored properly in cylinders to avoid leakage. We one of the prominent manufacturer, supplier and exporter of superior wide range of Copper Coils that are known in market for their high strength.

The unique properties of Copper Slating Coils are such as superior thermal conductivity, corrosion resistance. Our dedicated and diligent efforts have resulted in gaining a rich client base for Copper Perforated Coils across the nation. With the availability in various sizes, lengths and weights, these Copper Plates are easily accessible at market. We have set an exemplary standard in the industry by offering defect free range of Copper Coils.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Copper Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB 62
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 100 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, No.3, No.4, HL, BA, 8K
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Copper Sheet, plates and Coils Chemical Composition
Standard Copper NO. Chemical Composition Mechanical Properties
CU% P% Temper Tensile strength (Mpa) Elongation (%) Average Grain Size (mm)
ASTM
B280/62		 C12200 >99.9 0.015 to 0.040 >60 >205 >40 >0.040
>50 >245
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Copper Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Copper Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Copper Sheets
Copper Sheets

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Copper Sheets, Plates and Coils, where our market coverage includes both commercial and domestic. In a vast majority of electric furnaces operating today, Copper Coils transfer the electrical power from flexible power cables to electrode heads or contact pads. Copper Plates are ideal for Drinking Water, Central Heating, Sanitation, Hot and Cold Water, Industrial & Medical Gas Transportation, Various Engineering. We have emerged as leading traders & suppliers of premium quality Copper Slating Coils, all over the nation.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2022-06-15T11:42:42+05:30June 15th, 2022|

Cupro Nickel 90 Sheets Stockist

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Cupro Nickel 90 Sheets, Plates and Coils, where our offered collection is ensured to be in acquiescence by means of the international quality standards. The main and wrought Cupro Nickel 90 / 10 Plates selected for sea water service comprise 10 percent of nickel. An adding of iron in Cupro Nickel 90 / 10 Coils was made to upsurge its resistance to general corrosion, impingement corrosion and erosion resulting from the stormy movement of water comprising silt flowing and air bubbles at a superior velocity.

Cupro Nickel 90 Sheets Manufacturer In India | Cupro Nickel 90 Sheets Manufacturer In Mumbai | Cupro Nickel 90 Sheets Exporter In India | Cupro Nickel 90 Sheets Exporter In Mumbai | Cupro Nickel 90 Sheets Supplier In India | Cupro Nickel 90 Sheets Supplier In Mumbai | Cupro Nickel 90 Sheets Stockist In India | Cupro Nickel 90 Sheets Stockist In Mumbai
Cupro Nickel 90 Sheets

Cupro Nickel 90 Sheets

Cupro Nickel 90 / 10 Slating Coils (UNS C70600) exhibit bigger corrosion resistance in seawater. Meanwhile, Cupro Nickel 90 / 10 Perforated Coils are also being offered in different sizes and shapes to our customers. When other elements are present, nickel in Cu-Ni 90 / 10 Sheets has the largest individual content after copper, compared with each other element. Cu-Ni 90 / 10 Plates are a strong, ductile material exhibiting good corrosion resistance.

Cu-Ni 90 / 10 Coils are an alloy of copper, nickel and strengthening elements such as iron and manganese. We are occupied with assembling and supplying of Cu-Ni 90 / 10 Slating Coils which are generally refreshing for their quality, durability, temperature, and weight resistance. Cu-Ni 90 / 10 Perforated Coils exhibit excellent resistance to impingement attack, and offers superior resistance to general corrosion and marine water attacks.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cupro Nickel 90/10 Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB122
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cupro Nickel 90/10 Plate, Sheet & Coil Chemical Composition
Grade Cu Mn Pb Ni Fe Zn
Cupro Nickel 90/10 88.6 min 1.0 max 0.05 max 9-11 max 1.8 max 1 max
Cupro Nickel 90/10 Sheets, Plates & Coils Mechanical Properties
Grade Cu Mn Pb Ni Fe Zn
Cupro Nickel 90/10 88.6 min 1.0 max 0.05 max 9-11 max 1.8 max 1 max
Equivalent Grades for 90/10 Cupro Nickel Sheets & Plates
STANDARD WERKSTOFF NR. UNS
Cupro Nickel 90/10 2.0872 C70600
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cupro Nickel 90/10 Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Cupro Nickel 90/10 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cupro Nickel 90 Sheets
Cupro Nickel 90 Sheets

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Cupro Nickel 90 Sheets, Plates and Coils, where our offered collection is ensured to be in acquiescence by means of the international quality standards. The main and wrought Cupro Nickel 90 / 10 Plates selected for sea water service comprise 10 percent of nickel. An adding of iron in Cupro Nickel 90 / 10 Coils was made to upsurge its resistance to general corrosion, impingement corrosion and erosion resulting from the stormy movement of water comprising silt flowing and air bubbles at a superior velocity.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2022-06-14T15:38:39+05:30June 14th, 2022|

Cupro Nickel 70 Sheets Stockist

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Cupro Nickel 70 Sheets, Plates and Coils, which are considered and factory – made at our hi-tech manufacturing unit. Some usual applications for Cupro Nickel 70 / 30 Plates include: pump components, valves, etc. Cupro Nickel 70 / 30 Coils have outstanding pitting and corrosion resistance in marine atmospheres. Cupro Nickel 70 / 30 Slating Coils are ductile and strong. The small content of iron provides Cupro Nickel 70 / 30 Perforated Coils (UNS C71500) an unexpected resistance to wide – ranging corrosion and SCC, making it very appropriate and perfect for the marine or manufacturing industries.

Cupro Nickel 70 Sheets Manufacturer In India | Cupro Nickel 70 Sheets Manufacturer In Mumbai | Cupro Nickel 70 Sheets Exporter In India | Cupro Nickel 70 Sheets Exporter In Mumbai | Cupro Nickel 70 Sheets Supplier In India | Cupro Nickel 70 Sheets Supplier In Mumbai | Cupro Nickel 70 Sheets Stockist In India | Cupro Nickel 70 Sheets Stockist In Mumbai 
Cupro Nickel 70 Sheets

  Cupro Nickel 70 Sheets

Meanwhile, Cu-Ni 70 / 30 Sheets are also being offered in different sizes and shapes to our customers. Cu-Ni 70 / 30 Plates are as well used in Water Boxes – Salt Water Applications, Salt Water Flanges, Salt Water Piping, Pump Bodies and Internal Parts-Sea Water, Fittings. Cu-Ni 70 / 30 Coils is also used in Valve Bodies, Sea Water Service, Sea Water Condensers, Salt Water Pipe Fittings, Water Boxes – Salt Water Applications & Salt Water Flanges. Known for their flexibility, high corrosion resistance, superior tensile strength, trouble free installation and maintenance, Cu-Ni 70 / 30 Slating Coils are in demand in different industries.

The company has experience in these areas and is able to supply Cu-Ni 70 / 30 Perforated Coils in accordance with most international standards and special customer requirements.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cupro Nickel 70/30 Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB 122
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cupro Nickel 70/30 Plate, Sheet & Coil Chemical Composition
Grade Cu Mn Pb Ni Fe Zn
Cupro Nickel 70/30 65 min 1.0 max 0.05 max 29-33 max 0.4-1.0 max 1 max
Cupro Nickel 70/30 Sheets, Plates & Coils Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
0.323 lb/in3 at 68 F 2260 F 50000 psi 20000 psi 30 %
Equivalent Grades for 70/30 Cupro Nickel Sheets & Plates
STANDARD WERKSTOFF NR. UNS
Cupro Nickel 70/30 2.0882 C71500
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cupro Nickel 70/30 Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Cupro Nickel 70/30 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cupro Nickel 70 Sheets
Cupro Nickel 70 Sheets

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Cupro Nickel 70 Sheets, Plates and Coils, which are considered and factory – made at our hi-tech manufacturing unit. Some usual applications for Cupro Nickel 70 / 30 Plates include: pump components, valves, etc. Cupro Nickel 70 / 30 Coils have outstanding pitting and corrosion resistance in marine atmospheres. Cupro Nickel 70 / 30 Slating Coils are ductile and strong. The small content of iron provides Cupro Nickel 70 / 30 Perforated Coils (UNS C71500) an unexpected resistance to wide – ranging corrosion and SCC, making it very appropriate and perfect for the marine or manufacturing industries.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2022-06-14T14:54:27+05:30June 14th, 2022|

Titanium Grade 5 Sheets Stockist In India

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Titanium Grade 5 Sheets, Plates and Coils, where we provide these products in a number of dimensions and sizes for to cater the varied necessities of customers. These Titanium Grade 5 Plates are lengthily used in Medical, Aerospace, Chemical Processing and Marine. Our Titanium Grade 5 Coils is castable and is used “as cast” in sporting goods. These Titanium Grade 5 Slating Coils provides an outstanding grouping of high toughness and strength.

Titanium Grade 5 Sheets

Titanium Grade 5 Perforated Coils has excellent tensile properties at ambient temp and a worthwhile creep resistance for up to 570 Deg F. Meanwhile, these Grade 5 Titanium Plates are also being offered in different sizes and shapes to our customers. Commercially Pure (CP), Grade 5 Titanium Coils, in its annealed state, is a ductile metal. Resistance to fatigue and crack propagation is excellent of these Grade 5 Titanium Slating Coils.

Grade 5 Titanium Perforated Coils are metals that contain a mixture of titanium and other chemical elements, which further are 60 % heavier than aluminum, but twice as strong. These Ti Gr. 5 Sheets has a density of 4.51 g/cc – less than 60 % that of steel. Ti Gr. 5 Plates should be emphasized that fabrication operations (annealing, descaling) can increase the impurity level unless particular care is taken. We also offer these Ti Gr. 5 Coils at leading industry prices.

Titanium Gr 5 Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB265
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Titanium Gr 5 Plate, Sheet & Coil Chemical Composition

Grade Ti C Fe H N O Al V
Ti Grade5 90 min – 0.25 max – – 0.2 max 6 min 4 min

Titanium Gr 5 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 5 4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 %

Equivalent Grades for Gr 5 Titanium Sheets & Plates

STANDARD WERKSTOFF NR. UNS
Titanium Gr. 5 3.7165 N56400

Titanium Gr 5 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Titanium Gr 5 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-20T13:04:25+05:30June 13th, 2022|

Titanium Grade 2 Sheets Stockist In India

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Titanium Grade 2 Sheets ,Plates and Coils, which has a number of outstanding features to offer such as dimensionally stable, fine finish, high material power, etc. Titanium Grade 2 Plates as well has some other excellent features to offer such as hard-wearing, light weight, soaring tensile potency and so on. Superior quality steel is used by our specialists to make the offered collection of Titanium Grade 2 Coils following market set rules.

Titanium Grade 2 Sheets

The offered range of Titanium Grade 2 Slating Coils is made by keeping in deliberation the demands of our respectable clienteles. Available in the company of us is a higher quality variety of Titanium Grade 2 Perforated Coils. Meanwhile, Grade 2 Titanium Plates are also being offered in different sizes and shapes to our customers. Grade 2 Titanium Coils is also used in Automotive, Chemical Processing & Chlorate Manufacturing, Desalination, Architecture, Hydro Carbon Processing, Marine, Medical, and Power Generation. Grade 2 Titanium Slating Coils is widely used because it combines excellent formability and moderate strength with superior corrosion resistance.

Grade 2 Titanium Perforated Coils offers high corrosion resistance in oxidizing, neutral and mildly reducing media, including chlorides. Ti Gr. 2 Sheets is commercially pure titanium, where oxidation of the surface is often required to prevent seizing on drawing. CP-Ti 1 grade shows a slightly better corrosion resistance than our Ti Gr. 2 Plates.

Titanium Gr 2 Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB265
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Titanium Gr 2 Plate, Sheet & Coil Chemical Composition

Grade Ti C Fe H N O Al V
Ti Grade2 99.2 min 0.1 max 0.3 max 0.015 max 0.03 max 0.25 max – –

Titanium Gr 2 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 2 4.5 g/cm3 1665 °C (3030 °F) Psi – 49900 , MPa – 344 Psi – 39900 , MPa – 275 20 %

Equivalent Grades for Gr 2 Titanium Sheets & Plates

STANDARD WERKSTOFF NR. UNS
Titanium Gr. 2 3.7035 R50400

Titanium Gr 2 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Titanium Gr 2 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-20T16:03:12+05:30June 13th, 2022|

Nickel Alloy 201 Sheets Stockist In India

Nickel Alloy 201 Sheets Stockist In India

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Sheets, Plates, Coils, which resists attack from phosphoric acid and have been successfully used with nitric acid. These Nickel 201 Plates is unaffected by any of the weak bases such as ammonium hydroxide, even in high concentrations and at high temperatures. Our Nickel 201 Coils exposed to stronger bases such as sodium hydroxide at high concentrations and high temperatures will likely experience some etching and cracking, especially with solutions containing chlorides such as sodium hypochlorite.

Nickel Alloy 201 Sheets

Like steel, these Nickel 201 Slating Coils is a relatively poor conductor of electricity, with significantly lower electrical conductivity than copper. Other metals in contact with our Nickel 201 Perforated Coils, particularly in a damp or acidic environment, may suffer galvanic corrosion even though the stainless metal may be unaffected. These Alloy 201 Sheets is generally highly resistant to attack from acids, but this quality depends on the kind and concentration of the acid, the surrounding temperature, and the type of steel.

Our Alloy 201 Plates is resistant to sulphuric acid at room temperature, even in high concentrations. These Alloy 201 Coils are both useful for storing and handling acetic acid, especially in solutions where it is combined with formic acid and when aeration is not present (oxygen helps protect steel under such conditions), though it provides the greatest level of resistance to corrosion.

Nickel Alloy 201 Sheets, Plate & Coil Specifications
Specifications : ASTM / ASME SB 162
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Nickel 201 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Cu Fe Ni
Nickel 201 0.02 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel 201 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 201 Nickel Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 – LC-Ni 99

Nickel 201 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel 201 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-13T15:39:24+05:30June 6th, 2022|

Nickel Alloy 200 Sheets Stockist In India

Nickel Alloy 200 Sheets Stockist In India

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Nickel Alloy 200 Sheets, Plates and Coils to the respected patrons. Nickel 200 Sheets (UNS N02200) has a low annealed rigidity and extremely low work – toughening rate. Nickel 200 Plates is used in food handling machinery, general corrosion – resistant structures and parts, caustic solutions, etc. Nickel 200 Coils is chosen with beyond 315 Degree C, for the reason that of its enhanced resistance to “creep.” Nickel 200 Slating Coils is ferromagnetic and has comparatively low electrical resistivity, which consists of low carbon version of the alloy.

Nickel Alloy 200 Sheets

By means of Nickel 200 Perforated Coils, the limitations of both alloys are merged into a solitary dual chemistry that outcomes in a distinct alloy by means of the finest features of both. Meanwhile, these Alloy 200 Sheets are also being offered in different sizes and shapes to our customers. Alloy 200 Plates is combined with higher creep properties at temperature and unsullied to form incredibly powerful and ductile. The unsullied of Alloy 200 Coils has smart resistance to oxidization and will be employed in continuous service up to 1140 Degree C provided reducing Sulphur gases don’t seem to be gift.

The high metal and nickel contents of Alloy 200 Slating Coils offer comparable corrosion resistance, superior resistance to oxidization. Therefore the retention of Alloy 200 Perforated Coils has a bigger fraction of temperature strength than the common solid solution alloys like 304.

Nickel Alloy 200 Sheets, Plates & Coils Specifications
Specifications : ASTM / ASME SB 168
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Nickel 200 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Cu Fe Ni
Nickel 200 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel 200 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 200 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 200 Nickel Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2

Nickel 200 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel 200 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-13T17:51:52+05:30June 4th, 2022|

SACHIYA STEEL INTERNATIONAL

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top