Sachiya Steel International

coils

Hastelloy C22 Plates Stockist

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Hastelloy C22 Plates, Sheets And Coils to the esteemed patrons, which has some admirable features to offer such as durable, easy to fit, fine finish, and so on. We also offer these Hastelloy C22 Sheets at market leading rates. These Hastelloy C22 Plates have been used in strict process atmospheres such as those bump into the metal pickling amenities, chemical process industry, flue gas desulfurization scrubbers, nuclear fuel reprocessing, electronics manufacturing, and so on.

Hastelloy C22 Plates Manufacturer In India | Hastelloy C22 Plates Manufacturer In Mumbai | Hastelloy C22 Plates Exporter In India | Hastelloy C22 Plates Exporter In Mumbai | Hastelloy C22 Plates Supplier In India | Hastelloy C22 Plates Supplier In Mumbai | Hastelloy C22 Plates Stockist In India | Hastelloy C22 Plates Stockist In Mumbai
Hastelloy C22 Plates

                 Hastelloy C22 Plates

Hastelloy C22 Coils (UNS N06022) resists the development of grain boundary precipitates in the weld-heat affected region making it appropriate for use in the as – welded form. Meanwhile, these Hastelloy C22 Slating Coils are also being offered in customized sizes and shapes to our customers. Wrought products of Hastelloy C22 Perforated Coils are supplied in the Mill Annealed (MA) condition, unless otherwise specified. This solution annealing procedure has been designed to optimize the corrosion resistance and ductility of Alloy C22 Sheets.

Following all hot forming operations, Alloy C22 Plates should be re – annealed, to restore optimum properties. Alloy C22 Coils should also be re-annealed after any cold forming operations that result in an outer fiber elongation of 7 % or more. Alloy C22 Slating Coils is stiffer than most austenitic stainless steels, and more energy is required during cold forming. Alloy C22 Perforated Coils also provides guidelines for cold forming, spinning, drop hammering, punching, and shearing.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Hastelloy C22 Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB575
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Hastelloy C22 Plate, Sheet & Coil Chemical Composition
Grade C Mn Si S Co Ni Cr Fe Mo P
C22 0.010 max 0.50 max 0.08 max 0.02 max 2.50 max 50.015 min* 20.00 – 22.50 2.00 – 6.00 12.50 – 14.50 0.02 max
Alloy C22 Sheets, Plates & Coils Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C22 8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %
Equivalent Grades for C22 Hastelloy Sheets & Plates
STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C22 2.4602 N06022 NW 6022 – NiCr21Mo14W –

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Hastelloy C22 Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Alloy C22 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Hastelloy C22 Plates
Hastelloy C22 Plates

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Hastelloy C22 Plates, Sheets And Coils to the esteemed patrons, which has some admirable features to offer such as durable, easy to fit, fine finish, and so on. We also offer these Hastelloy C22 Sheets at market leading rates. These Hastelloy C22 Plates have been used in strict process atmospheres such as those bump into the metal pickling amenities, chemical process industry, flue gas desulfurization scrubbers, nuclear fuel reprocessing, electronics manufacturing, and so on.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]

By |2022-07-06T12:35:20+05:30July 6th, 2022|

Hastelloy C276 Plates Stockist

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy C276 Plates, Sheets And Coils, which is an anti – galling stainless steel that has excellent wear resistance. Hastelloy C276 Plates has outstanding resistance to pitting, oxidizing and stress – corrosion cracking environments up to 1900 Degree F. Hastelloy C276 Coils have outstanding resistance to pitting, stress corrosion and crevice corrosion cracking. Hastelloy C276 Slating Coils has excellent machinability, though the alloy work toughens as is correct of the nickel base alloys overall.

Hastelloy C276 Plates Manufacturer In India | Hastelloy C276 Plates Manufacturer In Mumbai | Hastelloy C276 Plates Exporter In India | Hastelloy C276 Plates Exporter In Mumbai | Hastelloy C276 Plates Supplier In India | Hastelloy C276 Plates Supplier In Mumbai | Hastelloy C276 Plates Stockist In India | Hastelloy C276 Plates Stockist In Mumbai
Hastelloy C276 Plates

      Hastelloy C276 Plates

The high molybdenum and nickel contents in Hastelloy C276 Perforated Coils (UNS N10276) make this nickel steel alloy particularly resistant to crevice corrosion and pitting in reducing atmospheres while chromium content delivers resistance to oxidizing media. Meanwhile, these Alloy C276 Plates are also being offered in customized sizes and shapes to our customers.

Temperature solution of these Alloy C276 Coils can be heat treated up to 1800 Degree F (982 Degree C), 1 hour, oil quenched, aged 1325 Degree F (718 Degree C), 16 hours, and then air cooled. In the solution treated condition, Alloy C276 Slating Coils can be satisfactorily cold drawn and formed. It is somewhat stiffer than stainless steels such as SS 316 and SS 310, and it work hardens rapidly. These Alloy C276 Perforated Coils has uniform corrosion resistance and provides great high – temperature oxidation resistance as well.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy C276 Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB575
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy C276 Plate, Sheet & Coil Chemical Composition
Grade C Mn Si S Co Ni Cr Fe Mo P
C276 0.010 max 1.00 max 0.08 max 0.03 max 2.50 max 50.99 min* 14.50 – 16.50 4.00 – 7.00 15.00 – 17.00 0.04 max
Alloy C276 Sheets, Plates & Coils Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C276 8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40 %
Equivalent Grades for C276 Hastelloy Sheets & Plates
STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C276 2.4819 N10276 NW 0276 ХН65МВУ NiMo16Cr15W ЭП760
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy C276 Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Alloy C276 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy C276 Plates
Hastelloy C276 Plates

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy C276 Plates, Sheets And Coils, which is an anti – galling stainless steel that has excellent wear resistance. Hastelloy C276 Plates has outstanding resistance to pitting, oxidizing and stress – corrosion cracking environments up to 1900 Degree F. Hastelloy C276 Coils have outstanding resistance to pitting, stress corrosion and crevice corrosion cracking. Hastelloy C276 Slating Coils has excellent machinability, though the alloy work toughens as is correct of the nickel base alloys overall.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2022-07-06T12:08:49+05:30July 6th, 2022|

Incoloy 330 Plates Stockist

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Incoloy 330 Plates, Sheets and Coils to the customers, which has some outstanding features such as optimum performance, durable finish and precisely engineered. The high chromium and nickel content of Incoloy 330 Sheets offer excellent resistance to carburization and oxidation. Oxidation resistance and Carburization to approximately 2100 Deg F are improved by the content of silicon of these Incoloy 330 Plates. The austenitic microstructure of Incoloy 330 Coils rests stable throughout long – time exposure to soaring temperature.

Incoloy 330 Plates Manufacturer In India | Incoloy 330 Plates Manufacturer In Mumbai | Incoloy 330 Plates Exporter In India | Incoloy 330 Plates Exporter In Mumbai | Incoloy 330 Plates Supplier In India | Incoloy 330 Plates Supplier In Mumbai | Incoloy 330 Plates Stockist In India | Incoloy 330 Plates Stockist In Mumbai
Incoloy 330 Plates

         Incoloy 330 Plates

SS 330 Sheets (UNS N08330) is welded effortlessly by all conventional procedures. Meanwhile, these SS 330 Plates are also being offered in different sizes and shapes to our customers. SS 330 Coils is actually an austenitic, nickel – chromium – iron – silicon alloy that has outstanding resistance to oxidation and carburization up to 2200 Degree F with high strength. Ra 330 Sheets also has excellent anti – corrosion and oxidation properties. With a nickel content of 34 percent to 37 percent, Ra 330 Plates remains highly resistant to both chloride stress corrosion cracking and embrittlement from the precipitation of sigma phase.

Slow speeds, positive feeds, sulphureted lubricants and rigid mounts are generally recommended for Ra 330 Coils. Due to controlled chemistry and proprietary heat treatment, Incoloy 330 Slating Coils outperforms the generic versions. Incoloy 330 Perforated Coils are widely used in furnaces, baking applications, petroleum industry.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 330/SS 330/Ra 330 Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB 168
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 330/SS 330/Ra 330 Plate, Sheet & Coil Chemical Composition
Grade C Mn Si S Cu Fe Ni Cr Sn Pb
330 0.08 max 2.00 max 0.75-1.50 0.03 max 1.00 max Balance 34.0-37.0 17.0-20.0 0.025 0.005 max
Equivalent Grades for 330/SS 330/Ra 330 Incoloy Sheets & Plates
STANDARD WERKSTOFF NR. UNS
Incoloy 330 1.4886 N08330
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 330/SS 330/Ra 330 Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Alloy 330/SS 330/Ra 330 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 330 Plates
Incoloy 330 Plates

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Incoloy 330 Plates, Sheets and Coils to the customers, which has some outstanding features such as optimum performance, durable finish and precisely engineered. The high chromium and nickel content of Incoloy 330 Sheets offer excellent resistance to carburization and oxidation. Oxidation resistance and Carburization to approximately 2100 Deg F are improved by the content of silicon of these Incoloy 330 Plates. The austenitic microstructure of Incoloy 330 Coils rests stable throughout long – time exposure to soaring temperature.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2022-07-02T10:57:59+05:30July 2nd, 2022|

Incoloy 925 Plates Stockist

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Incoloy 925 Plates, Sheets And Coils, which has outstanding features such as dimensional accuracy, fine finish, corrosion resistance, and so on. Incoloy 925 Strip Coils has exceptional resistance to pitting, general corrosion, stress – corrosion cracking and crevice corrosion in many aqueous atmospheres counting those containing chlorides and sulfides. These Incoloy 925 Slim Coils is used in a variety of different applications where high strength and corrosion resistance in sour gas environments is important.

Incoloy 925 Plates Manufacturer In India | Incoloy 925 Plates Manufacturer In Mumbai | Incoloy 925 Plates Exporter In India | Incoloy 925 Plates Exporter In Mumbai | Incoloy 925 Plates Supplier In India | Incoloy 925 Plates Supplier In Mumbai | Incoloy 925 Plates Stockist In India | Incoloy 925 Plates Stockist In Mumbai
Incoloy 925 Plates

       Incoloy 925 Plates

Appropriate nickel content in Incoloy 925 Coils offers protection in opposition to stress – corrosion cracking chloride – ion whilst in combination with the additional copper and molybdenum resistance to plummeting chemicals is relished. These Incoloy 925 Plates (UNS N09925) is a nickel based alloy comprising Chromium and Iron as major accompaniments, and also add – on of Titanium, Aluminium, Molybdenum and Copper. Meanwhile, Incoloy 925 Slating Coils are also being offered in different sizes and shapes to our customers.

The resistance of these Incoloy 925 Perforated Coils is developed by the precipitation of the gamma phase through solubilization and aging heat treatment, so as to maintain ductility and toughness at high levels. Conventional machining techniques used for iron based alloys may be used, which protects Inconel 925 Sheets in reducing and oxidizing environment. Titanium and aluminum in these Inconel 925 Plates form part of the precipitation hardening reaction that greatly increases hardness and strength of the alloy.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 925 Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB 168
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 925 Plate, Sheet & Coil Chemical Composition
Grade Ni Cr Fe Si Mo Cu Mn C S Al
Incoloy 925 42 – 46 19.55 – 22.5 22 min 0.5 max 2.5 – 3.5 1.5 – 3.0 1.0 max 0.03 max 0.03 max 0.1 – 0.5
Alloy 925 Sheets, Plates & Coils Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.14 g/cm3 1343°C 650 300 30 %
Equivalent Grades for 925 Incoloy Sheets & Plates
STANDARD WERKSTOFF NR. UNS
Incoloy 925 – N09925
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 925 Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Alloy 925 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 925 Plates
Incoloy 925 Plates

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Incoloy 925 Plates, Sheets And Coils, which has outstanding features such as dimensional accuracy, fine finish, corrosion resistance, and so on. Incoloy 925 Strip Coils has exceptional resistance to pitting, general corrosion, stress – corrosion cracking and crevice corrosion in many aqueous atmospheres counting those containing chlorides and sulfides. These Incoloy 925 Slim Coils is used in a variety of different applications where high strength and corrosion resistance in sour gas environments is important.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2022-07-01T11:58:16+05:30July 1st, 2022|

Incoloy 825 Plates Stockist

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Incoloy 825 Plates, Sheets and Coils, which are made by using best quality of material. Heavy duty machining machinery and tooling must be used in these Incoloy 825 Slating Coils to minimalize chatter or work – toughening of the alloy ahead of the cutting. The levels of copper and molybdenum enable our Incoloy 825 Perforated Coils to resist reducing acids and agents. Chemical configuration of these Alloy 825 Plates offer great resistance to several corrosive atmospheres, such as crevice corrosion, pitting, stress – corrosion cracking and inter – granular corrosion.

Incoloy 825 Plates Manufacturer In India | Incoloy 825 Plates Manufacturer In Mumbai | Incoloy 825 Plates Exporter In India | Incoloy 825 Plates Exporter In Mumbai | Incoloy 825 Plates Supplier In India | Incoloy 825 Plates Supplier In Mumbai | Incoloy 825 Plates Stockist In India  | Incoloy 825 Plates Stockist In Mumbai
Incoloy 825 Plates

         Incoloy 825 Plates

Alloy 825 Coils is used in good temperatures for about 1020 Degree F. Meanwhile, Alloy 825 Slating Coils are also being offered in different sizes and shapes to our customers. These Alloy 825 Perforated Coils has good mechanical properties from moderate to high temperatures, where conventional machining techniques used for iron based alloys may be used. Incoloy UNS N08825 Sheets is especially resistant to sulfuric and phosphoric acids, which further has good mechanical performance in both room temperature and up to 550 Degree C.

These Incoloy 825 Sheets is stabilized annealed at the mill to resist inter – granular corrosion as – welded, where tooling should be such as to allow for liberal clearances and radii. The outstanding property of Nickel-Alloy 825 Coils is its corrosion resistance. We also offer these Nickel-Alloy 825 Plates in best possible prices.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Incoloy 825 Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB 424
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Incoloy 825 Plate, Sheet & Coil Chemical Composition
Grade C Mn Si S Cu Fe Ni Cr Al Ti
825 0.05 max 1.00 max 0.5 max 0.03 max 1.50 – 3.00 22.00 min 38.00 – 46.00 19.50 – 23.50 0.02 max 0.06 – 1.20
Alloy 825 Sheets, Plates & Coils Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %
Equivalent Grades for 825 Incoloy Sheets & Plates
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo XH38BT

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Incoloy 825 Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Alloy 825 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Incoloy 825 Plates
Incoloy 825 Plates

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Incoloy 825 Plates, Sheets and Coils, which are made by using best quality of material. Heavy duty machining machinery and tooling must be used in these Incoloy 825 Slating Coils to minimalize chatter or work – toughening of the alloy ahead of the cutting. The levels of copper and molybdenum enable our Incoloy 825 Perforated Coils to resist reducing acids and agents. Chemical configuration of these Alloy 825 Plates offer great resistance to several corrosive atmospheres, such as crevice corrosion, pitting, stress – corrosion cracking and inter – granular corrosion.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]

By |2022-07-01T11:31:15+05:30July 1st, 2022|

Incoloy 800 Plates Stockist

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Incoloy 800 Plates, Sheets and Coils, where our offered collection is confirmed to be in obedience by means of the international quality standards. Incoloy 800 Sheets is a nickel – iron – chromium alloy by means of good resistance to oxidation, carburization at high temperatures and moderate strength. In power generation, re – heater and super – heater tubing has engaged these Incoloy 800 Plates. Meanwhile, these Incoloy 800 Coils are resistance to protracted exposure to high temperatures.

Incoloy 800 Plates Manufacturer In India | Incoloy 800 Plates Manufacturer In Mumbai | Incoloy 800 Plates Exporter In India | Incoloy 800 Plates Exporter In Mumbai | Incoloy 800 Plates Supplier In India | Incoloy 800 Plates Supplier In Mumbai | Incoloy 800 Plates Stockist In India | Incoloy 800 Plates Stockist In Mumbai
Incoloy 800 Plates

                 Incoloy 800 Plates

Incoloy 800H Sheets is very much serviceable as it upholds a stable construction, even when unprotected to soaring temp. Meanwhile, these Incoloy 800H Plates are also being offered in different sizes and shapes to our customers. Incoloy 800HT Coils perform well in sodium salt and other molten salt environments, with stress corrosion cracking resistance surpassing standard austenitic stainless steels. Incoloy 800 Slating Coils has excellent resistant to oxidation and carburization in high temperature environments.

Incoloy 800HT Perforated Coils has a restricted chemistry, within the limits of Incoloy 800H Perforated Coils, and requires a heat treatment of 2100 Degree F (1149 Degree C) minimum. Alloy 800HT Coils is also used for valves, fittings and other components exposed to corrosive attack from 1100 Degree F to 1800 Degree F. Alloy 800 Sheets Plates with a standard anneal is recommended for service below 1100 Degree F (600 Degree C).

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Incoloy 800/800H/800HT Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB 409
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Incoloy 800/800H/800HT Plate, Sheet & Coil Chemical Composition
Grade C Mn Si S Cu Fe Ni Cr Al Ti
800 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60ᴬ 0.15 – 0.60ᴬ
Alloy 800/800H/800HT Sheets, Plates & Coils Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
800 / 800H / 800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %
Equivalent Grades for 800/800H/800HT Incoloy Sheets & Plates
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 – X8NiCrAlTi32-21 XH32T

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Incoloy 800/800H/800HT Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Alloy 800/800H/800HT Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Incoloy 800 Plates
Incoloy 800 Plates

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Incoloy 800 Plates, Sheets and Coils, where our offered collection is confirmed to be in obedience by means of the international quality standards. Incoloy 800 Sheets is a nickel – iron – chromium alloy by means of good resistance to oxidation, carburization at high temperatures and moderate strength. In power generation, re – heater and super – heater tubing has engaged these Incoloy 800 Plates. Meanwhile, these Incoloy 800 Coils are resistance to protracted exposure to high temperatures.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]

By |2022-06-30T15:15:19+05:30June 30th, 2022|

Inconel Alloy 718 Plates Stockist

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Inconel Alloy 718 Plates, Sheets and Coils to the customers, which is extensively demanded for its sturdiness and durability. Inconel 718 Sheets has advanced power than Inconel 718 Sheets, which further can be willingly age hardened and worked. Inconel 718 Strip Coils is a nickel-chromium and precipitation – harden able alloy comprising also noteworthy quantities of iron, molybdenum and niobium together by means of smaller amounts of titanium and aluminum.

Inconel Alloy 718 Plates Manufacturer In India | Inconel Alloy 718 Plates Manufacturer In Mumbai | Inconel Alloy 718 Plates Exporter In India | Inconel Alloy 718 Plates Exporter In Mumbai | Inconel Alloy 718 Plates Supplier In India | Inconel Alloy 718 Plates Supplier In Mumbai | Inconel Alloy 718 Plates Stockist In India | Inconel Alloy 718 Plates Stockist In Mumbai
Inconel Alloy 718 Plates

     Inconel Alloy 718 Plates

Inconel 718 Coils shows very high tensile, yield, and creep – rupture features at soaring temperatures. Inconel 718 Plates (UNS N07718) has outstanding creep – rupture potency at temperatures till 1300 Deg F. To perform this function, Inconel 718 Slim Coils must first be solution heat treated (solution annealed is a synonymous term). However, this treatment in Alloy 718 Slating Coils has a tendency to produce notch brittleness in stress rupture. Meanwhile, these Inconel 718 Slating Coils are also being offered in different sizes and shapes to our customers.

Welding of Inconel 718 Perforated Coils in the aged condition will cause the formation of a softened heat – affected zone. Alloy 718 Plates is highly resistant to chloride and sulfide stress corrosion cracking. Typical applications of Alloy 718 Coils in the oil industry are gate valves, choke stems, fasteners, tubing hangers and fire safe valves. We also offer these Alloy 718 Perforated Coils market industry prices.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel 718 Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB 670
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel 718 Plate, Sheet & Coil Chemical Composition
Grade C Mn Si S Cu Fe Ni Cr
Inconel 718 0.08 max 0.35 max 0.35 max 0.015max 0.30 max – 50.00 – 55.00 17.00 – 21.00
Alloy 718 Sheets, Plates & Coils Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 718 8.2 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482 45 %
Equivalent Grades for 718 Inconel Sheets & Plates
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 718 2.4668 N07718 – – – – –
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel 718 Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Alloy 718 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel Alloy 718 Plates
Inconel Alloy 718 Plates

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Inconel Alloy 718 Plates, Sheets and Coils to the customers, which is extensively demanded for its sturdiness and durability. Inconel 718 Sheets has advanced power than Inconel 718 Sheets, which further can be willingly age hardened and worked. Inconel 718 Strip Coils is a nickel-chromium and precipitation – harden able alloy comprising also noteworthy quantities of iron, molybdenum and niobium together by means of smaller amounts of titanium and aluminum.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2022-06-30T12:06:30+05:30June 30th, 2022|

Inconel Alloy 625 Plates Stockist

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Inconel Alloy 625 Plates ,Sheets and Coils, which is furnished by means of sophisticated machines and techniques. Inconel 625 Sheets as well validates significant protection in opposition to oxidation and corrosion. The exceptional toughness and strength of Inconel 625 Plates in the temperature series cryogenic to 1093 Deg C are derivative mainly from the solid solution possessions of the refractory metals, molybdenum and columbium, in chromium – nickel matrix.

Inconel Alloy 625 Plates Manufacturer In India | Inconel Alloy 625 Plates Manufacturer In Mumbai | Inconel Alloy 625 Plates Exporter In India | Inconel Alloy 625 Plates Exporter In Mumbai | Inconel Alloy 625 Plates Supplier In India | Inconel Alloy 625 Plates Supplier In Mumbai  | Inconel Alloy 625 Plates Stockist In India | Inconel Alloy 625 Plates Stockist In Mumbai
Inconel Alloy 625 Plates

Inconel Alloy 625 Plates

Inconel 625 Coils has exceptional fatigue power and stress-corrosion cracking resistance to chloride ions. Inconel 625 Slating Coils has outstanding weldability, and are often used in nuclear reactors and pollution-control machinery. Meanwhile, these Inconel 625 Perforated Coils are also being offered in different sizes and shapes to our customers. Alloy 625 Plates is particularly useful in situations where oxidation resistance and avoidance of pitting is required. The strength of Alloy 625 Coils can be enhanced by heat treatment. The high molybdenum content makes Alloy 625 Slating Coils very resistant to pitting and crevice corrosion.

Major markets for Alloy 625 Perforated Coils include: Nuclear, Marine, Aerospace and Chemical Processing. The outstanding and versatile corrosion resistance of Inconel UNS N06625 Sheets Plates under a wide range of temperatures and pressures is a primary reason for its wide acceptance in the chemical processing field. Nickel Alloy 625 Sheets is often used in Aircraft ducting systems, Jet engine exhaust systems and Engine thrust – reverser systems.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel 625 Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB 168
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel 625 Plate, Sheet & Coil Chemical Composition
Grade C Mn Si S Cu Fe Ni Cr
Inconel 625 0.10 max 0.50 max 0.50 max 0.015max – 5.0 max 58.0 min 20.0 – 23.0
Alloy 625 Sheets, Plates & Coils Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 625 8.4 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 517 42.5 %
Equivalent Grades for 625 Inconel Sheets & Plates
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 625 2.4856 N06625 NCF 625 NA 21 ХН75МБТЮ NC22DNB4MNiCr22Mo9Nb NiCr23Fe
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel 625 Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Alloy 625 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel Alloy 625 Plates
Inconel Alloy 625 Plates

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Inconel Alloy 625 Plates ,Sheets and Coils, which is furnished by means of sophisticated machines and techniques. Inconel 625 Sheets as well validates significant protection in opposition to oxidation and corrosion. The exceptional toughness and strength of Inconel 625 Plates in the temperature series cryogenic to 1093 Deg C are derivative mainly from the solid solution possessions of the refractory metals, molybdenum and columbium, in chromium – nickel matrix.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2022-06-29T17:40:27+05:30June 29th, 2022|

Inconel Alloy 601 Plates Stockist

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Inconel Alloy 601 Plates, Sheets and Coils, which are extensively appropriate for dissimilar purposes in dissimilar industries. Inconel 601 Plates is useful for chemical progression machinery such as process heaters, condenser tubes and combustor components. Inconel 601 Coils has been effectively used in the following uses, such as annealing, sintering muffles, retorts and copper brazing. Inconel 601 Slating Coils has excellent resistance to aqueous corrosion. Inconel 601 Perforated Coils has excellent hot corrosion resistance under oxidizing environments.

Inconel Alloy 601 Plates Manufacturer In India | Inconel Alloy 601 Plates Manufacturer In Mumbai | Inconel Alloy 601 Plates Exporter In India | Inconel Alloy 601 Plates Exporter In Mumbai | Inconel Alloy 601 Plates Supplier In India | Inconel Alloy 601 Plates Supplier In Mumbai | Inconel Alloy 601 Plates Stockist In India | Inconel Alloy 601 Plates Stockist In Mumbai 
Inconel Alloy 601 Plates

    Inconel Alloy 601 Plates

Alloy 601 Coils stands out because of its resistance to soaring temperature oxidation, where we also offer the same at industry leading prices. Alloy 601 Slating Coils has excellent oxidation resistance and also has good resistance to carburizing but should not be used in atmospheres containing sulfur content.

Alloy 601 Perforated Coils must be cooled as rapidly as possible through the range 1400 Degree F to 1000 Degree F. Nickel-Alloy 601 Sheets is often used for thermal reactors in exhaust system of petrol engines. Nickel-Alloy 601 Plates is also used for combustor components and catalyst grid supports in equipment for nitric acid production. These Nickel-Alloy 601 Coils are also used in baskets, trays, and fixtures for heat – treating equipment. Heavy lubricants Inconel UNS N06601 Sheets Plates are used for tapping, boring, broaching or drilling. Meanwhile, these Alloy 601 Plates are also being offered in different sizes and shapes to our customers.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Inconel 601 Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB 168
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Inconel 601 Plate, Sheet & Coil Chemical Composition
Grade C Mn Si S Cu Fe Ni Cr
Inconel 601 0.10 max 1.00 max 0.50 max 0.015max 1.00 max Balance 58.0 – 63.0 21.0 – 25.0
Alloy 601 Sheets, Plates & Coils Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 601 8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %
Equivalent Grades for 601 Inconel Sheets & Plates
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Inconel 601 Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Alloy 601 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Inconel Alloy 601 Plates
Inconel Alloy 601 Plates

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Inconel Alloy 601 Plates, Sheets and Coils, which are extensively appropriate for dissimilar purposes in dissimilar industries. Inconel 601 Plates is useful for chemical progression machinery such as process heaters, condenser tubes and combustor components. Inconel 601 Coils has been effectively used in the following uses, such as annealing, sintering muffles, retorts and copper brazing. Inconel 601 Slating Coils has excellent resistance to aqueous corrosion. Inconel 601 Perforated Coils has excellent hot corrosion resistance under oxidizing environments.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]

By |2022-06-29T16:29:00+05:30June 29th, 2022|

Inconel Alloy 600 Plates Stockist

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Inconel Alloy 600 Plates, Sheets, and Coils in different dimensions and sizes, where we as well offer the same at best possible rates. These Inconel 600 Sheets has outstanding corrosion by soaring-purity water, together with caustic corrosion. Our Inconel 600 Plates has suitable resistance to dry HCl and Cl2 gases at reasonably high temperatures. The high content of nickel of this Inconel 600 Coils offers excellent resistance to chloride stress corrosion cracking, where conventional machining practices used for iron constructed alloys may perhaps be used.

Inconel Alloy 600 Plates Manufacturer In India | Inconel Alloy 600 Plates Manufacturer In Mumbai | Inconel Alloy 600 Plates Exporter In India | Inconel Alloy 600 Plates Exporter In Mumbai | Inconel Alloy 600 Plates Supplier In India | Inconel Alloy 600 Plates Supplier In Mumbai | Inconel Alloy 600 Plates Stockist In India | Inconel Alloy 600 Plates Stockist In Mumbai

Inconel Alloy 600 Plates

Inconel Alloy 600 Plates

Our Inconel 600 Slating Coils has Exceptional Corrosion Resistance at Elevated Temperatures, which shows soaring levels of resistance to stress – corrosion cracking. These Inconel 600 Perforated Coils (UNS N06600) presents the needed grouping of good weldability and high strength under an extensive collection of temperatures. Our Alloy 600 Plates is often used in for furnace components, chemical and food processing, nuclear engineering, for sparking electrodes and so on.

These Alloy 600 Coils provides resistance to a number of organic and inorganic compounds, alkaline solutions and chloride – ion stress – corrosion cracking as well. Our Alloy 600 Slating Coils is virtually immune to chloride ion stress corrosion cracking and is also non – magnetic and resistant to a wide range of corrosive materials. Meanwhile, these Alloy 600 Perforated Coils are as well being offered in different sizes and shapes to our customers.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel 600 Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB 168
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel 600 Plate, Sheet & Coil Chemical Composition
Grade C Mn Si S Cu Fe Ni Cr
Inconel 600 0.15 max 1.00 max 0.50 max 0.015max 0.50 max 6.00 – 10.00 72.00 min 14.00 – 17.00
Alloy 600 Sheets, Plates & Coils Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 600 8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %
Equivalent Grades for 600 Inconel Sheets & Plates
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 600 2.4816 N06600 NCF 600 NA 13 МНЖМц 28-2,5-1,5 NC15FE11M NiCr15Fe
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel 600 Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Alloy 600 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel Alloy 600 Plates
Inconel Alloy 600 Plates

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Inconel Alloy 600 Plates, Sheets, and Coils in different dimensions and sizes, where we as well offer the same at best possible rates. These Inconel 600 Sheets has outstanding corrosion by soaring-purity water, together with caustic corrosion. Our Inconel 600 Plates has suitable resistance to dry HCl and Cl2 gases at reasonably high temperatures. The high content of nickel of this Inconel 600 Coils offers excellent resistance to chloride stress corrosion cracking, where conventional machining practices used for iron constructed alloys may perhaps be used.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2022-06-27T18:46:19+05:30June 27th, 2022|

SACHIYA STEEL INTERNATIONAL

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top