Bolt size table Archives - Steel Pipes/Tubes Manufacturers, Top Pipe Suppliers


 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Carbon Steel Nuts And Bolts, which have shown good formability in a variety of fabrications. Carbon Steel Counter Sunk Bolts has excellent general corrosion resistance; superior to Grade 316 in most environments, where higher cutting forces are required and more rapid tool wear is typical. Carbon Steel Acorn Nuts has excellent resistance to localized corrosion including inter – granular, pitting and crevice corrosion, where the CPT is generally at least 35 Degree C. Carbon Steel Lag Bolts is also resistant to chloride stress corrosion cracking (SCC) at temperatures of up to about 150 Degree C.

Carbon Steel Nuts Manufacturer In India | Carbon Steel Nuts Manufacturer In Mumbai | Carbon Steel Nuts Exporter In India | Carbon Steel Nuts Exporter In Mumbai | Carbon Steel Nuts Supplier In India | Carbon Steel Nuts Supplier In Mumbai | Carbon Steel Nuts Stockist In India | Carbon Steel Nuts Stockist In Mumbai
Carbon Steel Nuts
     Carbon Steel Nuts

Sachiya Steel International is one of the prominent distributor and stockiest for high quality ASME SA 563 Carbon Steel Dome Nuts, which is similar to Type 904, but has more strength and hardness. Carbon Steel Hex Bolts can be hardened through heat treatment, which brings good ductility for metal fabricators as well as excellent polish ability.

Application of Carbon Steel Coupling Nuts could result in real cost savings when carefully compared to higher – cost alloys to determine if the necessary resistance is obtained in the chosen media. Carbon Steel T-Bolts has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulphuric, phosphoric, and nitric acids.

Carbon Steel Bolt/Nut Specifications
Specifications : ASTM A 307 ASME SA 307 / ASTM A 563 ASME SA 563
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.
Carbon Steel Bolt/Nut Chemical Composition
Element Carbon, max Manganese, max Phosphorus, max Sulfur, max
Grade A 0.29 % 1.20 % 0.04 % 0.15 %
Grade B 0.29 % 1.20 % 0.04 % 0.05 %
Carbon Steel Bolt/Nut Mechanical Properties
Grade Tensile, ksi Yield, min, ksi Elong %, min
A 60 min 18
B 60 – 100 18
C* 58 – 80 36 23
Carbon Steel Bolt/Nut Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Carbon Steel Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)



 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy 17-4 PH Nuts And  Bolts, where short – time and low – temperature heat treatments minimize distortion and scaling. Typical usage of Alloy 17-4 PH Hex Head Bolts is seen in applications requiring high strength and a modest level of corrosion resistance. These Alloy 17-4 PH Hex Head Nuts can be heat treated to high levels of strength and hardness, and features corrosion resistance and machinability comparable to austenitic 304 stainless. The valuable combination of high strength, good corrosion resistance and toughness in Alloy 17-4 PH Hex Head Nuts over both base metals and welds gives designers opportunities to add reliability to their products while simplifying fabrication and often reducing costs.

Alloy 17-4 PH Nuts Manufacturer In India | Alloy 17-4 PH Nuts Manufacturer In Mumbai | Alloy 17-4 PH Nuts Exporter In India | Alloy 17-4 PH Nuts Exporter In Mumbai | Alloy 17-4 PH Nuts Supplier In India | Alloy 17-4 PH Nuts Supplier In Mumbai | Alloy 17-4 PH Nuts Stockist In India | Alloy 17-4 PH Nuts Stockist In Mumbai 
Alloy 17-4 PH Nuts Manufacturer
Alloy 17-4 PH Nuts Manufacturer

To increase their yield strength, these Alloy 17-4 PH Square Bolts are subjected to heat treatment during precipitation hardening (PH) or age hardening. High strength of Alloy 17-4 PH Square Nuts is maintained to approximately 600 degrees Fahrenheit (316 degrees Celsius). These Alloy 17-4 PH Eye Bolts has adequate resistance to atmospheric corrosion or in diluted acid salts where its corrosion resistance is equivalent to Alloy 304 or Alloy 430.

Alloy 17-4 PH Eye Nuts combines high strength, hardness (up to 572 Degree F / 300 Degree C), and corrosion resistance. Known for its’ corrosion resistance characteristics, the different shapes and finishes of these Alloy 17-4 PH T-Bolts make the composition suitable for a wide variety of environments.

17-4ph Bolt/Nut Specifications
Specifications : ASTM A 479 ASME SA 479
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.
SS 17-4ph Bolt/Nut Chemical Composition
SS 17-4ph Ni C Mo Mn Si S Cr
3.00 – 5.00 0.07 0.60 1.50 0.70 0.015 15.0 – 17.0
SS 17-4ph Bolt/Nut Mechanical Properties
Density Melting Point Yield Strength (PSI)
Tensile Strength (PSI) Elongation
7.8
1425 °C
170 190 10 %
17-4ph Bolt/Nut Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
17-4ph Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 104/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 104 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 104/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 104 3.1 and EN 104 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 



Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Carbon Steel Bolts and ASTM A563 CS Fasteners Nuts, which have shown good formability in a variety of fabrications. Carbon Steel Counter Sunk Bolts has excellent general corrosion resistance; superior to Grade 316 in most environments, where higher cutting forces are required and more rapid tool wear is typical. Carbon Steel Acorn Nuts has excellent resistance to localized corrosion including inter – granular, pitting and crevice corrosion, where the CPT is generally at least 35 Degree C.

Carbon Steel Bolts Manufacturer In India | Carbon Steel Bolts Manufacturer In Mumbai | Carbon Steel Bolts Exporter In India | Carbon Steel Bolts Exporter In Mumbai | Carbon Steel Bolts Supplier In India | Carbon Steel Bolts Supplier In Mumbai | Carbon Steel Bolts Stockist In India | Carbon Steel Bolts Stockist In Mumbai
Carbon Steel Bolts
  Carbon Steel Bolts

Carbon Steel Lag Bolts is also resistant to chloride stress corrosion cracking (SCC) at temperatures of up to about 150 Degree C. Sachiya Steel International is one of the prominent distributor and stockiest for high quality ASME SA 563 Carbon Steel Dome Nuts, which is similar to Type 904, but has more strength and hardness. Carbon Steel Hex Bolts can be hardened through heat treatment, which brings good ductility for metal fabricators as well as excellent polish ability.

Application of Carbon Steel Coupling Nuts could result in real cost savings when carefully compared to higher – cost alloys to determine if the necessary resistance is obtained in the chosen media. Carbon Steel T-Bolts has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulphuric, phosphoric, and nitric acids.

Carbon Steel Bolt/Nut Specifications

Specifications : ASTM A 307 ASME SA 307 / ASTM A 563 ASME SA 563
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

Carbon Steel Bolt/Nut Chemical Composition

Element Carbon, max Manganese, max Phosphorus, max Sulfur, max
Grade A 0.29 % 1.20 % 0.04 % 0.15 %
Grade B 0.29 % 1.20 % 0.04 % 0.05 %

Carbon Steel Bolt/Nut Mechanical Properties

Grade Tensile, ksi Yield, min, ksi Elong %, min
A 60 min 18
B 60 – 100 18
C* 58 – 80 36 23

Carbon Steel Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Carbon Steel Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Carbon Steel Bolts
Carbon Steel Bolts Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Carbon Steel Bolts and ASTM A563 CS Fasteners Nuts, which have shown good formability in a variety of fabrications. Carbon Steel Counter Sunk Bolts has excellent general corrosion resistance; superior to Grade 316 in most environments, where higher cutting forces are required and more rapid tool wear is typical

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5


 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy 17-4PH Bolts And Nuts, where short – time and low – temperature heat treatments minimize distortion and scaling. Typical usage of Alloy 17-4 PH Hex Head Bolts is seen in applications requiring high strength and a modest level of corrosion resistance. These Alloy 17-4 PH Hex Head Nuts can be heat treated to high levels of strength and hardness, and features corrosion resistance and machinability comparable to austenitic 304 stainless.

Alloy 17-4PH Bolts Manufacturer In India | Alloy 17-4PH Bolts Manufacturer In Mumbai | Alloy 17-4PH Bolts Exporter In India |Alloy 17-4PH Bolts Exporter In Mumbai | Alloy 17-4PH Bolts Supplier In India | Alloy 17-4PH Bolts Supplier In Mumbai | Alloy 17-4PH Bolts Stockist In India | Alloy 17-4PH Bolts Stockist In Mumbai 

The valuable combination of high strength, good corrosion resistance and toughness in Alloy 17-4 PH Hex Head Nuts over both base metals and welds gives designers opportunities to add reliability to their products while simplifying fabrication and often reducing costs. To increase their yield strength, these Alloy 17-4 PH Square Bolts are subjected to heat treatment during precipitation hardening (PH) or age hardening. High strength of Alloy 17-4 PH Square Nuts is maintained to approximately 600 degrees Fahrenheit (316 degrees Celsius).

Alloy 17-4PH Bolts
        Alloy 17-4PH Bolts

These Alloy 17-4 PH Eye Bolts has adequate resistance to atmospheric corrosion or in diluted acid salts where its corrosion resistance is equivalent to Alloy 304 or Alloy 430. Alloy 17-4 PH Eye Nuts combines high strength, hardness (up to 572 Degree F / 300 Degree C), and corrosion resistance. Known for its’ corrosion resistance characteristics, the different shapes and finishes of these Alloy 17-4 PH T-Bolts make the composition suitable for a wide variety of environments.

17-4ph Bolt/Nut Specifications

Specifications : ASTM A 479 ASME SA 479
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

SS 17-4ph Bolt/Nut Chemical Composition

SS 17-4ph Ni C Mo Mn Si S Cr
3.00 – 5.00 0.07 0.60 1.50 0.70 0.015 15.0 – 17.0

SS 17-4ph Bolt/Nut Mechanical Properties

Density Melting Point Yield Strength (PSI)
Tensile Strength (PSI) Elongation
7.8
1425 °C
170 190 10 %

17-4ph Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

17-4ph Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 104/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 104 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 104/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 104 3.1 and EN 104 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Alloy 17-4PH Bolts
Alloy 17-4PH Bolts Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy 17-4PH Bolts And Nuts, where short – time and low – temperature heat treatments minimize distortion and scaling. Typical usage of Alloy 17-4 PH Hex Head Bolts is seen in applications requiring high strength and a modest level of corrosion resistance.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Mumbai

Headquarters


D-2, Office no. 3, Gr. Floor, Bharat Nagar Society, Grant Road (E), Mumbai – 400007.
+91 9769056007

+91 22 66518863

[email protected][email protected]
LOCATIONS

We Are Everywhere


Alloy 17-4PH Bolts Manufacturer

OUR NETWORK india

MumbaiDelhiChennai


About Us

Sachiya Steel International

We are an ISO 9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.

We are an ISO TUV  9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.