astm a106 pdf

Sachiya Steel international is a renowned manufacturer, supplier and exporter of high quality ASTM A106 Pipes . We offer ASTM A106 Pipes of various sizes with unique characteristics. We value these pipes and pipes for our customers for their durability, corrosion resistance and dimensional accuracy. These pipes and tubes are commonly used in the oil and gas industry, in power plants, in boilers, on ships, etc. We also offer competitive prices for these products in the market.

The weld metallurgy of ASME SA 106 GR. B Carbon Steel Welded Pipes, as with other ferrite – austenitic stainless steels, has a ferrite structure during solidification. And when the weld metal temperature of ASTM A106 GR. B Carbon Steel EFW Pipes is in the 2100 Degree F to 2640 Degree F (1150 Degree C to 1450 Degree C) range, it is possible for the HAZ to increase its ferrite content.

It is the cooling of the high temp ferrite of ASME SA 106 GR. B Carbon Steel ERW Pipes that allows retransformation into austenite, yielding a ferrite – austenite weld structure. Cooling rates of ASTM A106 GR. B Carbon Steel Round Pipes are extremely important as getting the weld area too hot, or using too much weld energy, leads to cooling rates being too slow, allowing the formation of embrittling sigma phase in the heat affected zone. Conversely, if not enough weld energy is used in ASME SA 106 GR. B Carbon Steel Square Pipes, then the cooling rates are too fast, leading to too much ferrite in the weld metal and a fragile weld joint.

ASTM A106 Pipe Specification

Specification	:	A106 NPS 1/8 — 48 ANSI Schedules to 160
Sizes(Seamless)	:	1/2″ NB – 60″ NB
Sizes(ERW)	:	1/2″ NB – 24″ NB
Sizes(SAW)	:	16″ NB – 100″ NB
Wall Thickness available	:	Schedule 20-Schedule XXS (heavier on request) up to 250 mm thickness.

Chemical Requirements 

ELEMENT	COMPOSITION, %
	ASTM A106 Gr.B	ASTM A106 Gr.C
C max A	0.30	0.35
Mn	0.29-1.06	0.29-1.06
P, max	0.04	0.04
S, max	0.04	0.04
Si, min	0.10	0.10
Cr, maxB	0.40	0.40
Cu, maxB	0.40	0.40
Mo, maxB	0.15	0.15

Ni, maxB	0.40	0.40
V, maxB	0.08	0.08

Tensile Requirements 

	ASTM A106 Gr.B	ASTM A106 Gr.C
Y.S, min, psi [Mpa]	35 000 [240]	40 000 [275]
T.S., min, psi [Mpa]	60 000 [415]	70 000 [485]

ELONGATION

ASTM A106 Gr.B		ASTM A106 Gr.C
L	T	L	T
22	12	20	12

Carbon Steel A106 Pipes Packaging

Carbon Steel A106 Gr.B/ Gr.C  may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of Alloy 20 Seamless Pipe may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.

Carbon Steel A106 Pipes Application Industries

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals
• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

Alloy Steel Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B.
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Country’s We Export

Venezuela, Iraq, United Kingdom, Russia, United Arab Emirates, Croatia, Indonesia, Oman, Kazakhstan, Israel, Kenya, Iran, Bahrain, Bhutan, Colombia, Serbia, Pakistan, Czech Republic, Turkey, Ukraine, Poland, Bulgaria, France, Chile, Slovakia, Belgium, Iran, Ireland, Qatar, Sri Lanka, Sweden, Brazil, Bolivia, Taiwan, Jordan, South Africa, Switzerland, Tibet, Norway, India, Ghana, Costa Rica, Hungary, New Zealand, Vietnam, Ecuador, Afghanistan, Algeria, Peru, Netherlands, Argentina, Austria, Malaysia, Thailand, Portugal, Zimbabwe, Mongolia, Lebanon, Trinidad & Tobago, Tunisia, Mexico, Greece, Angola, Hong Kong, Denmark, Nepal, Finland, Chile, Poland, Yemen, Nigeria, Italy, Bangladesh, Australia, Macau, Azerbaijan, Saudi Arabia, Japan, Gabon, Philippines, Singapore, United States, Namibia, Romania, South Korea, Germany, Puerto Rico, Estonia, Morocco, Belarus, Nigeria, Mexico, Spain, China, Canada, Libya, Lithuania, Kuwait, Gambia, Egypt.