astm a 106 gr b Archives - Sachiya Steel International Steel Tubes


API 5L X42 PSL 2 Seamless Pipes, API 5l Psl 2 welded Pipe Exporter, API 52 Welded Pipes, API 5L X42 PSL2 Carbon Steel Line Pipes, ERW Pipes Suppliers in India.

 

We are leading Manufacturers, Supplier, Dealers, and Exporter of API 5L X42 PSL 2 Pipes in India. Our API 5L X42 PSL 2 Pipes are available in different sizes, shapes, and grades and specifications as per the clients requirements. We supply API 5L X42 PSL 2 Pipes in most of the major Indian cities in more than 20 States. We Sachiya Steel International offer different types of grades like Stainless Steel Pipes, Super Duplex Pipes, Duplex Pipes, Carbon Steel Pipes, Alloys Steel Pipes, Nickel Alloys Pipes, Aluminium Pipes, etc.

 

API 5L X42 PSL 2 Pipes


Chemical Composition of API 5L X42 PSL 2 Pipe

 

SEAMLESS PIPE
C Mn P V Nb Ti
maxb maxb max. max. max. max. max.
0.28 1.20 0.030 0.030 c,d c,d d
WELDED PIPE
0.26 1.20 0.030 0.030 c,d c,d d

 

Mechanical properties of API 5L X42 PSL 2 Pipe

 

Y.S T.S ELONGATION
Mpa(psi) Mpa(psi)
min min min
245(35 500) 415(60 200) 28%

 

Types of API 5L X42 PSL 2 Pipes

 

Remi Group Remi Steel Pipes Make API 5L X42 PSL 2 Seamless Pipe ISMT Ltd Make API 5L X42 PSL 2 Welded Pipe
Jindal India Make API 5L X42 PSL 2 Seamless Tubes Essar Steel Make API 5L X42 PSL 2 Welded Tubes

 

API 5L X42 PSL 2 Pipes may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of API 5L X42 PSL 2 Pipes may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.

API 5L X42 PSL 2 Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

 

API 5L X42 PSL 2 Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

  • EN 10204/3.1B.
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc
API 5L X42 PSL 2 Pipes Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flattening Test
  • Micro and MacroTest
  • Pitting Resistance Test
  • Flaring Test
  • Intergranular Corrosion (IGC) Test

 

API 5L X42 PSL 2 Pipes Documentation
  • Commercial Invoice which includes HS Code
  • Packing List including net weight and gross weight, number of boxes, Marks and Numbers
  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Fumigation Certificates
  • Raw Material Test Reports
  • Material Traceability Records
  • Quality Assurance Plan (QAP)
  • Heat Treatment Charts
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Guarantee Letter
  • NABL approved Laboratory Test Reports
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • Form A for the purposes of the Generalized System of Preferences (GSP)

 

Country’s We Export

Venezuela, Iraq, United Kingdom, Russia, United Arab Emirates, Croatia, Indonesia, Oman, Kazakhstan, Israel, Kenya, Iran, Bahrain, Bhutan, Colombia, Serbia, Pakistan, Czech Republic, Turkey, Ukraine, Poland, Bulgaria, France, Chile, Slovakia, Belgium, Iran, Ireland, Qatar, Sri Lanka, Sweden, Brazil, Bolivia, Taiwan, Jordan, South Africa, Switzerland, Tibet, Norway, India, Ghana, Costa Rica, Hungary, New Zealand, Vietnam, Ecuador, Afghanistan, Algeria, Peru, Netherlands, Argentina, Austria, Malaysia, Thailand, Portugal, Zimbabwe, Mongolia, Lebanon, Trinidad & Tobago,Tunisia, Mexico, Greece, Angola, Hong Kong, Denmark, Nepal, Finland, Chile, Poland, Yemen, Nigeria, Italy, Bangladesh, Australia, Macau, Azerbaijan, Saudi Arabia, Japan, Gabon, Philippines, Singapore, United States, Namibia, Romania, South Korea, Germany, Puerto Rico, Estonia, Morocco, Belarus, Nigeria, Mexico, Spain, China, Canada, Libya, Lithuania, Kuwait, Gambia, Egypt.

 

 

API 5L X42 PSL 2 Pipes

We are leading Manufacturers, Supplier, Dealers, and Exporter of API 5L X42 PSL 2 Pipes in India. Our API 5L X42 PSL 1 Pipes are available in different sizes, shapes, and grades and specifications as per the clients requirements. We supply nickel alloy Pipes in most of the major Indian cities in more than 20 States.

Product Brand: Carbon Steel Pipes

Product In-Stock: https://schema.org/InStock

Editor's Rating:
5


 

We are leading Manufacturers, Supplier, Dealers, and Exporter of API 5L X70 PSL 1 Pipes in India. Our API 5L X70 PSL 1 Pipes are available in different sizes, shapes, and grades and specifications as per the clients requirements. We supply API 5L X70 PSL 1 Pipes in most of the major Indian cities in more than 20 States. We Sachiya Steel International offer different types of grades like Stainless Steel Pipes, Super Duplex Pipes, Duplex Pipes, Carbon Steel Pipes, Alloys Steel Pipes, Nickel Alloys Pipes, Aluminium Pipes, etc.

 

API 5L X70 PSL 1 Pipes


Standards Specifications of ASTM API 5L X70 PSL 1 Pipes

Dimensions ASTM, ASME, API.
Wall Thickness SCH10,SCH20,SCH30,STD,SCH40,SCH60,XS,SCH80,SCH100,SCH120,SCH140,SCH160,XXS DIN, JIS standard thickness
Sizes LSAW/DSAW 16’OD TO 54′ OD (8 MM TO 50 MM THK)
Sizes (SAW) 16″ NB – 100″ NB
Sizes (ERW) 1/2″ NB – 24″ NB
Sizes (Seamless) 1/2″ NB – 60″ NB

 

Chemical Composotion of ASTM API 5L X 70 PSL 1 Pipes

 

SEAMLESS PIPE
C Mn P S V Nb Ti
maxb maxb min. max. max. max. max. max.
0.28e 1.40e 0.030 0.030 F F F
WELDED PIPE
0.26E 1.65e 0.030 0.030 F F F

 

Mechanical Properties of ASTM API 5L X 70 PSL 1 Pipes

 

Y.S T.S ELONGATION
MPA(psi) MPA(psi)
min min min
485(70 300) 570(82 700) F

 

Types of API 5L X 70 PSL 1 Pipes

 

Tata Steel Make API 5L X 70 PSL 1 Seamless Pipe API 5L X 70 PSL 1 Welded Pipe
PI 5L X 70 PSL 1 Fabricated Pipe ISMT Ltd Make API 5L X 70 PSL 1 EFW Pipe
API 5L X 70 PSL 1 ERW Pipe API 5L X 70 PSL 1 Round Pipe
Jindal India Make API 5L X 70 PSL 1 Square Pipe API 5L X 70 PSL 1 Rectangle Pipe
API 5L X 70 PSL 1 Polish Pipe Tenaris Pipes Make API 5L X 70 PSL 1 Seamless Tubes
API 5L X 70 PSL 1 Welded Tubes Lalit Pipes and Pipes Limited Make API 5L X 70 PSL 1 Round Tubes
API 5L X 70 PSL 1 Square Tubes Sanyo Special Steel Pipes Make API 5L X 70 PSL 1 Hollow Pipe
API 5L X 70 PSL 1 Bush Pipe API 5L X 70 PSL 1 Tube Coil

 

API 5L X70 PSL 1 Pipes may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of API 5L X70 PSL 1 Pipes may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.

API 5L X70 PSL 1 Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
API 5L X70 PSL 1 Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

  • EN 10204/3.1B.
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc
API 5L X70 PSL 1 Pipes Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flattening Test
  • Micro and MacroTest
  • Pitting Resistance Test
  • Flaring Test
  • Intergranular Corrosion (IGC) Test

 

API 5L X70 PSL 1 Pipes Documentation
  • Commercial Invoice which includes HS Code
  • Packing List including net weight and gross weight, number of boxes, Marks and Numbers
  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Fumigation Certificates
  • Raw Material Test Reports
  • Material Traceability Records
  • Quality Assurance Plan (QAP)
  • Heat Treatment Charts
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Guarantee Letter
  • NABL approved Laboratory Test Reports
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • Form A for the purposes of the Generalized System of Preferences (GSP)

 

Country’s We Export

Venezuela, Iraq, United Kingdom, Russia, United Arab Emirates, Croatia, Indonesia, Oman, Kazakhstan, Israel, Kenya, Iran, Bahrain, Bhutan, Colombia, Serbia, Pakistan, Czech Republic, Turkey, Ukraine, Poland, Bulgaria, France, Chile, Slovakia, Belgium, Iran, Ireland, Qatar, Sri Lanka, Sweden, Brazil, Bolivia, Taiwan, Jordan, South Africa, Switzerland, Tibet, Norway, India, Ghana, Costa Rica, Hungary, New Zealand, Vietnam, Ecuador, Afghanistan, Algeria, Peru, Netherlands, Argentina, Austria, Malaysia, Thailand, Portugal, Zimbabwe, Mongolia, Lebanon, Trinidad & Tobago,Tunisia, Mexico, Greece, Angola, Hong Kong, Denmark, Nepal, Finland, Chile, Poland, Yemen, Nigeria, Italy, Bangladesh, Australia, Macau, Azerbaijan, Saudi Arabia, Japan, Gabon, Philippines, Singapore, United States, Namibia, Romania, South Korea, Germany, Puerto Rico, Estonia, Morocco, Belarus, Nigeria, Mexico, Spain, China, Canada, Libya, Lithuania, Kuwait, Gambia, Egypt.

 

API 5L X70 PSL 1 Pipe

We are leading Manufacturers, Supplier, Dealers, and Exporter of API 5L X70 PSL 1 Pipes in India. Our API 5L X70 PSL 1 Pipes are available in different sizes, shapes, and grades and specifications as per the clients requirements. We supply nickel alloy Pipes in most of the major Indian cities in more than 20 States.

Product Brand: Seamless Pipes

Product In-Stock: https://schema.org/OutOfStock

Editor's Rating:
5


 

Sachiya Steel international is a renowned manufacturer, supplier and exporter of high quality ASTM A106 pipes . We offer ASTM A106 pipes of various sizes with unique characteristics. We value these pipes and pipes for our customers for their durability, corrosion resistance and dimensional accuracy. These pipes and tubes are commonly used in the oil and gas industry, in power plants, in boilers, on ships, etc. We also offer competitive prices for these products in the market.

The weld metallurgy of ASME SA 106 GR. B Carbon Steel Welded Pipes, as with other ferrite – austenitic stainless steels, ASTM A106 pipehas a ferrite structure during solidification. And when the weld metal temperature of ASTM A106 GR. B Carbon Steel EFW Pipes is in the 2100 Degree F to 2640 Degree F (1150 Degree C to 1450 Degree C) range, it is possible for the HAZ to increase its ferrite content.

It is the cooling of the high temp ferrite of ASME SA 106 GR. B Carbon Steel ERW Pipes that allows retransformation into austenite, yielding a ferrite – austenite weld structure. Cooling rates of ASTM A106 GR. B Carbon Steel Round Pipes are extremely important as getting the weld area too hot, or using too much weld energy, leads to cooling rates being too slow, allowing the formation of embrittling sigma phase in the heat affected zone. Conversely, if not enough weld energy is used in ASME SA 106 GR. B Carbon Steel Square Pipes, then the cooling rates are too fast, leading to too much ferrite in the weld metal and a fragile weld joint.

 

 

ASTM A106 pipe Specification

Specification A106 NPS 1/8 — 48 ANSI Schedules to 160
Sizes(Seamless) 1/2″ NB – 60″ NB
Sizes(ERW) 1/2″ NB – 24″ NB
Sizes(SAW) 16″ NB – 100″ NB
Wall Thickness available Schedule 20-Schedule XXS (heavier on request) up to 250 mm thickness.

 

Chemical Requirements 

 

ELEMENT COMPOSITION, %
ASTM A106 Gr.B ASTM A106 Gr.C
C max A 0.30 0.35
Mn 0.29-1.06 0.29-1.06
P, max 0.04 0.04
S, max 0.04 0.04
Si, min 0.10 0.10
Cr, maxB 0.40 0.40
Cu, maxB 0.40 0.40
Mo, maxB 0.15 0.15
Ni, maxB 0.40 0.40
V, maxB 0.08 0.08

 

Tensile Requirements 

 

ASTM A106 Gr.B ASTM A106 Gr.C
Y.S, min, psi [Mpa] 35 000 [240] 40 000 [275]
T.S., min, psi [Mpa] 60 000 [415] 70 000 [485]

 

ELONGATION

 

ASTM A106 Gr.B ASTM A106 Gr.C
L T L T
22 12 20
12

 

Carbon Steel A106 Pipes Packaging

Carbon Steel A106 Gr.B/ Gr.C  may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of Alloy 20 Seamless Pipe may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.

Carbon Steel A106 Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

 

Alloy Steel Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

  • EN 10204/3.1B.
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flattening Test
  • Micro and MacroTest
  • Pitting Resistance Test
  • Flaring Test
  • Intergranular Corrosion (IGC) Test
Documentation
  • Commercial Invoice which includes HS Code
  • Packing List including net weight and gross weight, number of boxes, Marks and Numbers
  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Fumigation Certificates
  • Raw Material Test Reports
  • Material Traceability Records
  • Quality Assurance Plan (QAP)
  • Heat Treatment Charts
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Guarantee Letter
  • NABL approved Laboratory Test Reports
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • Form A for the purposes of the Generalized System of Preferences (GSP)

 

Country’s We Export

Venezuela, Iraq, United Kingdom, Russia, United Arab Emirates, Croatia, Indonesia, Oman, Kazakhstan, Israel, Kenya, Iran, Bahrain, Bhutan, Colombia, Serbia, Pakistan, Czech Republic, Turkey, Ukraine, Poland, Bulgaria, France, Chile, Slovakia, Belgium, Iran, Ireland, Qatar, Sri Lanka, Sweden, Brazil, Bolivia, Taiwan, Jordan, South Africa, Switzerland, Tibet, Norway, India, Ghana, Costa Rica, Hungary, New Zealand, Vietnam, Ecuador, Afghanistan, Algeria, Peru, Netherlands, Argentina, Austria, Malaysia, Thailand, Portugal, Zimbabwe, Mongolia, Lebanon, Trinidad & Tobago,Tunisia, Mexico, Greece, Angola, Hong Kong, Denmark, Nepal, Finland, Chile, Poland, Yemen, Nigeria, Italy, Bangladesh, Australia, Macau, Azerbaijan, Saudi Arabia, Japan, Gabon, Philippines, Singapore, United States, Namibia, Romania, South Korea, Germany, Puerto Rico, Estonia, Morocco, Belarus, Nigeria, Mexico, Spain, China, Canada, Libya, Lithuania, Kuwait, Gambia, Egypt.

 

 

ASTM A106 Pipe GR. B / ASTM A106 GR. C

Sachiya Steel international is a renowned manufacturer, supplier and exporter of high quality ASTM A106 pipes . We offer ASTM A106 pipes of various sizes with unique characteristics. We value these pipes and pipes for our customers for their durability, corrosion resistance and dimensional accuracy

Product Brand: Carbon Steel Pipes

Product In-Stock: https://schema.org/OutOfStock

Editor's Rating:
5



Seamless Pipes

Seamless Pipes

We are leading Manufacturers, Supplier, Dealers, and Exporter of Seamless Pipes in India. Our Seamless Pipes are available in different sizes, shapes, and grades. We supply these Pipes in most of the major Indian cities in more than 20 States. We Sachiya Steel International offer different types of grades like Stainless Steel Pipes, Super Duplex Steel Pipes, Duplex Steel Pipes, Carbon Steel pipes, Alloys Steel pipes, Nickel Alloys pipes, Titanium Steel pipes, Inconel Steel pipes, Aluminium pipes, etc.

 

About Seamless Pipes:

A seamless tube is a tube that does not have any welding seam. The seamless tube will ideally be a solid metal tube with each end connected to another tube without having any welding joint. These Pipes have threads either at one end or at both ends and can be threaded to the end of another hollow tube or pipe.

Uses & Application of Seamless Pipes:
  1. It is used in aircraft hydraulic lifts. These use small amounts of nickel and large percentages of chromium.
  2. Many factories, mills, and production lines use these components for their machines or in the manufactured products.
  3. Stainless steel Pipes used in the production of high-quality mufflers in the auto industry. Fuel and heat lines need them in order to withstand the extreme elements.
  4. Industrial, aerospace, military and nuclear developments use highly resistant varieties made with the toughest alloys for their specific needs.
  5. Households are filled with all kinds of stainless steel tubing. Refrigerators and common household appliances use them.
Seamless Pipes Specifications
Schedule SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120,SCH140, SCH160, XXS
Standard ASME/ANSI B16.11, MSS-SP-97, MSS-SP-79, JIS B2316, BS 3799
Pipes Size 1/8″NB to 24″NB & 1/4″OD TO 24″OD AND 6.35mm to 254mm OD Thickness: 0.6mm to 20mm
Type Seamless/ erw/ welded/semi welded in round, square, rectangular, coil form, u shape and hydraulic. Pipes
Grades
Stainless Steel ASTM / ASME 201, 202, 301, 304, 304L, 310, 310S, 316L, 316TI, 317, 317L, 321, 347, 409, 409M, 409L, 410, 410S, 420, 430, 431, 441, 444, 446, 17.4PH, 904L
Super Duplex Steel S32750
Duplex Steel ASTM / ASME SA 790 UNS NO S 31803 , S 32205 , S 32550 , S 32750 , S 32760.
Carbon Steel ASTM / ASME A 335 GRP 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91
Alloys Steel ASTM / ASME A 691 GRP1 CR , 1 1/4 CR , 2 1/4 CR , 5 CR , 9CR , 91.
Nickel Alloys Nickel Alloys 200, Nickel Alloys 201
Titanium Grade 1, Grade 4, Grade 5(Ti 6Al-4V), Grade 6(Ti 5Al-2.5Sn), Grade 7, Grade 11, Grade 12, 8Ai-1Mo-1V, Grade 9(3Al-2.5V), 6Al-6V-25n, 6Al-2Sn-4Zr-2Mo, 6Al-7Nb, Grade 23(Ti 6AL-4V ELI), Grade 5 ELI
Inconel Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 , Inconel 690, Inconel 602, Inconel 617, Inconel 925, Inconel A-289, Inconel AL-6XN, AL-904L
Hastelloy Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000, Hastelloy C-4, Hastelloy X, Hastelloy B, Hastelloy N, Hastelloy G
Molybdenum ASTM / ASME A 182 GR F 5, F 9 , F 11 , F 12 , F 22 , F 91, ASTM B387, Ferro Molybdenum
Cobalt Cobalt HS-6, Cobalt HS-4, Cobalt HS-25, Sterlite Grade 1, Sterlite Grade 6, Sterlite Grade 12, Sterlite Grade 21
Niobium ASTM B394, R04200 R04210
Nimonic Nimonic75, Nimonic80, Nimonic85, Nimonic90, Nimonic263, etc
Tungsten W1 WAl1, W61, etc, Carbonide Tungsten, Copper Tungsten, Nickel Tungsten
Nichrome Nichrome90, Nichrome80, Nichrome80A, Nichrome RW80, Nichrome75, etc
Magnesium Magnesium AL017100, AL017140, AL017150, AL017160, AL017200, AL017210, AL017250, etc.
Tantalum Tantalum – Grade 1.
Monel Monel 400, Monel k500
MU-METAL MU-METAL
Zirconium Zirconium 702, Zirconium 705,Zirconium 705, Zirconium-2, Zirconium-4
Beryllium Copper Alloy 25 UNSC17200
Aluminium 1050,1100, 2017, 7150, 7178, 7575, 2050, 7085, 2011 A92011, 2014A A92014, 2024 A92024, 2219, 5052 A95052, 5083 A95083, 5754, 6061 A96061 A86061, 6063, 6082 A96082, 7071 7020, 7050 A97050, 7075 A97075 A87075, 7175
Copper Alloys C 11000, C 10200, C 12200, C 51100, C 51000, C 51900, C 52000, C 52100, C 74500, C 75700, C 75400, C 76400, C 77000, C 21000, C 22000, C 23000, C 24000, C 26000, C 26800, C 27000, C 27200, C 28000

 


Mumbai

Headquarters


D-2, Office no. 3, Gr. Floor, Bharat Nagar Society, Grant Road (E), Mumbai – 400007.
+91 9769056007

+91 22 66518863

sales@sachiyasteel.comexport@sachiyasteel.com
LOCATIONS

We Are Everywhere



OUR NETWORK india

MumbaiDelhiChennai


About Us

Sachiya Steel International

We are an ISO 9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.

We are an ISO TUV  9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.