a106 material Archives - Sachiya Steel International Steel Tubes


API 5L X42 PSL 2 Seamless Pipes, API 5l Psl 2 welded Pipe Exporter, API 52 Welded Pipes, API 5L X42 PSL2 Carbon Steel Line Pipes, ERW Pipes Suppliers in India.

 

We are leading Manufacturers, Supplier, Dealers, and Exporter of API 5L X42 PSL 2 Pipes in India. Our API 5L X42 PSL 2 Pipes are available in different sizes, shapes, and grades and specifications as per the clients requirements. We supply API 5L X42 PSL 2 Pipes in most of the major Indian cities in more than 20 States. We Sachiya Steel International offer different types of grades like Stainless Steel Pipes, Super Duplex Pipes, Duplex Pipes, Carbon Steel Pipes, Alloys Steel Pipes, Nickel Alloys Pipes, Aluminium Pipes, etc.

 

API 5L X42 PSL 2 Pipes


Chemical Composition of API 5L X42 PSL 2 Pipe

 

SEAMLESS PIPE
C Mn P V Nb Ti
maxb maxb max. max. max. max. max.
0.28 1.20 0.030 0.030 c,d c,d d
WELDED PIPE
0.26 1.20 0.030 0.030 c,d c,d d

 

Mechanical properties of API 5L X42 PSL 2 Pipe

 

Y.S T.S ELONGATION
Mpa(psi) Mpa(psi)
min min min
245(35 500) 415(60 200) 28%

 

Types of API 5L X42 PSL 2 Pipes

 

Remi Group Remi Steel Pipes Make API 5L X42 PSL 2 Seamless Pipe ISMT Ltd Make API 5L X42 PSL 2 Welded Pipe
Jindal India Make API 5L X42 PSL 2 Seamless Tubes Essar Steel Make API 5L X42 PSL 2 Welded Tubes

 

API 5L X42 PSL 2 Pipes may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of API 5L X42 PSL 2 Pipes may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.

API 5L X42 PSL 2 Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

 

API 5L X42 PSL 2 Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

  • EN 10204/3.1B.
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc
API 5L X42 PSL 2 Pipes Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flattening Test
  • Micro and MacroTest
  • Pitting Resistance Test
  • Flaring Test
  • Intergranular Corrosion (IGC) Test

 

API 5L X42 PSL 2 Pipes Documentation
  • Commercial Invoice which includes HS Code
  • Packing List including net weight and gross weight, number of boxes, Marks and Numbers
  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Fumigation Certificates
  • Raw Material Test Reports
  • Material Traceability Records
  • Quality Assurance Plan (QAP)
  • Heat Treatment Charts
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Guarantee Letter
  • NABL approved Laboratory Test Reports
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • Form A for the purposes of the Generalized System of Preferences (GSP)

 

Country’s We Export

Venezuela, Iraq, United Kingdom, Russia, United Arab Emirates, Croatia, Indonesia, Oman, Kazakhstan, Israel, Kenya, Iran, Bahrain, Bhutan, Colombia, Serbia, Pakistan, Czech Republic, Turkey, Ukraine, Poland, Bulgaria, France, Chile, Slovakia, Belgium, Iran, Ireland, Qatar, Sri Lanka, Sweden, Brazil, Bolivia, Taiwan, Jordan, South Africa, Switzerland, Tibet, Norway, India, Ghana, Costa Rica, Hungary, New Zealand, Vietnam, Ecuador, Afghanistan, Algeria, Peru, Netherlands, Argentina, Austria, Malaysia, Thailand, Portugal, Zimbabwe, Mongolia, Lebanon, Trinidad & Tobago,Tunisia, Mexico, Greece, Angola, Hong Kong, Denmark, Nepal, Finland, Chile, Poland, Yemen, Nigeria, Italy, Bangladesh, Australia, Macau, Azerbaijan, Saudi Arabia, Japan, Gabon, Philippines, Singapore, United States, Namibia, Romania, South Korea, Germany, Puerto Rico, Estonia, Morocco, Belarus, Nigeria, Mexico, Spain, China, Canada, Libya, Lithuania, Kuwait, Gambia, Egypt.

 

 

API 5L X42 PSL 2 Pipes

We are leading Manufacturers, Supplier, Dealers, and Exporter of API 5L X42 PSL 2 Pipes in India. Our API 5L X42 PSL 1 Pipes are available in different sizes, shapes, and grades and specifications as per the clients requirements. We supply nickel alloy Pipes in most of the major Indian cities in more than 20 States.

Product Brand: Carbon Steel Pipes

Product In-Stock: Available

Editor's Rating:
5


 

Sachiya Steel international is a renowned manufacturer, supplier and exporter of high quality ASTM A106 pipes . We offer ASTM A106 pipes of various sizes with unique characteristics. We value these pipes and pipes for our customers for their durability, corrosion resistance and dimensional accuracy. These pipes and tubes are commonly used in the oil and gas industry, in power plants, in boilers, on ships, etc. We also offer competitive prices for these products in the market.

The weld metallurgy of ASME SA 106 GR. B Carbon Steel Welded Pipes, as with other ferrite – austenitic stainless steels, ASTM A106 pipehas a ferrite structure during solidification. And when the weld metal temperature of ASTM A106 GR. B Carbon Steel EFW Pipes is in the 2100 Degree F to 2640 Degree F (1150 Degree C to 1450 Degree C) range, it is possible for the HAZ to increase its ferrite content.

It is the cooling of the high temp ferrite of ASME SA 106 GR. B Carbon Steel ERW Pipes that allows retransformation into austenite, yielding a ferrite – austenite weld structure. Cooling rates of ASTM A106 GR. B Carbon Steel Round Pipes are extremely important as getting the weld area too hot, or using too much weld energy, leads to cooling rates being too slow, allowing the formation of embrittling sigma phase in the heat affected zone. Conversely, if not enough weld energy is used in ASME SA 106 GR. B Carbon Steel Square Pipes, then the cooling rates are too fast, leading to too much ferrite in the weld metal and a fragile weld joint.

 

 

ASTM A106 pipe Specification

Specification A106 NPS 1/8 — 48 ANSI Schedules to 160
Sizes(Seamless) 1/2″ NB – 60″ NB
Sizes(ERW) 1/2″ NB – 24″ NB
Sizes(SAW) 16″ NB – 100″ NB
Wall Thickness available Schedule 20-Schedule XXS (heavier on request) up to 250 mm thickness.

 

Chemical Requirements 

 

ELEMENT COMPOSITION, %
ASTM A106 Gr.B ASTM A106 Gr.C
C max A 0.30 0.35
Mn 0.29-1.06 0.29-1.06
P, max 0.04 0.04
S, max 0.04 0.04
Si, min 0.10 0.10
Cr, maxB 0.40 0.40
Cu, maxB 0.40 0.40
Mo, maxB 0.15 0.15
Ni, maxB 0.40 0.40
V, maxB 0.08 0.08

 

Tensile Requirements 

 

ASTM A106 Gr.B ASTM A106 Gr.C
Y.S, min, psi [Mpa] 35 000 [240] 40 000 [275]
T.S., min, psi [Mpa] 60 000 [415] 70 000 [485]

 

ELONGATION

 

ASTM A106 Gr.B ASTM A106 Gr.C
L T L T
22 12 20
12

 

Carbon Steel A106 Pipes Packaging

Carbon Steel A106 Gr.B/ Gr.C  may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of Alloy 20 Seamless Pipe may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.

Carbon Steel A106 Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

 

Alloy Steel Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

  • EN 10204/3.1B.
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flattening Test
  • Micro and MacroTest
  • Pitting Resistance Test
  • Flaring Test
  • Intergranular Corrosion (IGC) Test
Documentation
  • Commercial Invoice which includes HS Code
  • Packing List including net weight and gross weight, number of boxes, Marks and Numbers
  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Fumigation Certificates
  • Raw Material Test Reports
  • Material Traceability Records
  • Quality Assurance Plan (QAP)
  • Heat Treatment Charts
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Guarantee Letter
  • NABL approved Laboratory Test Reports
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • Form A for the purposes of the Generalized System of Preferences (GSP)

 

Country’s We Export

Venezuela, Iraq, United Kingdom, Russia, United Arab Emirates, Croatia, Indonesia, Oman, Kazakhstan, Israel, Kenya, Iran, Bahrain, Bhutan, Colombia, Serbia, Pakistan, Czech Republic, Turkey, Ukraine, Poland, Bulgaria, France, Chile, Slovakia, Belgium, Iran, Ireland, Qatar, Sri Lanka, Sweden, Brazil, Bolivia, Taiwan, Jordan, South Africa, Switzerland, Tibet, Norway, India, Ghana, Costa Rica, Hungary, New Zealand, Vietnam, Ecuador, Afghanistan, Algeria, Peru, Netherlands, Argentina, Austria, Malaysia, Thailand, Portugal, Zimbabwe, Mongolia, Lebanon, Trinidad & Tobago,Tunisia, Mexico, Greece, Angola, Hong Kong, Denmark, Nepal, Finland, Chile, Poland, Yemen, Nigeria, Italy, Bangladesh, Australia, Macau, Azerbaijan, Saudi Arabia, Japan, Gabon, Philippines, Singapore, United States, Namibia, Romania, South Korea, Germany, Puerto Rico, Estonia, Morocco, Belarus, Nigeria, Mexico, Spain, China, Canada, Libya, Lithuania, Kuwait, Gambia, Egypt.

 

 

ASTM A106 Pipe GR. B / ASTM A106 GR. C

Sachiya Steel international is a renowned manufacturer, supplier and exporter of high quality ASTM A106 pipes . We offer ASTM A106 pipes of various sizes with unique characteristics. We value these pipes and pipes for our customers for their durability, corrosion resistance and dimensional accuracy

Product Brand: Carbon Steel Pipes

Product In-Stock: Not Available

Editor's Rating:
5

Mumbai

Headquarters


D-2, Office no. 3, Gr. Floor, Bharat Nagar Society, Grant Road (E), Mumbai – 400007.
+91 9769056007

+91 22 66518863

sales@sachiyasteel.comexport@sachiyasteel.com
LOCATIONS

We Are Everywhere



OUR NETWORK india

MumbaiDelhiChennai


About Us

Sachiya Steel International

We are an ISO 9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.

We are an ISO TUV  9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.