[bt_section][bt_row][bt_column width=”1/1″][bt_text]


Sachiya Steel International offers an extensive range and is a known supplier of Inconel 718 Washers, which can be readily machined in either the annealed or the age – hardened condition. Inconel 718 Flat Washers is hardened by the precipitation of secondary phases (e.g. gamma prime and gamma double – prime) into the metal matrix.

Inconel 718 Lock Washers maintains good corrosion resistance and oxidation resistance and is used for parts requiring high resistance to creep and stress rupture up to 1300 Degree F (704 Degree C). Inconel 718 Sealing Washers is used in a variety of industries such as aerospace, marine engineering, chemical processing, pollution – control equipment, and nuclear reactors.

Inconel 718 Washers | Inconel 718 Washers | Inconel 718 Washers | Inconel 718 Washers | Inconel 718 Washers 

Inconel 718 Split Washers is also used in Gas Turbines, Space Craft, Rocket Motors, Pumps and so on. In both as – built and age – hardened states, the parts of these Inconel 718 Slot Washers can be machined, spark – eroded, welded, micro shot – peened, coated and polished if required.

The excellent strength and corrosion resistance of Inconel 718 Machine Washers have been recognized by the oil industry and it is now widely used in this field. It is the optimum heat treatment for these Inconel 718 Star Washers where a combination of rupture life, rupture ductility and notch rupture life is required. The age-hardening response of Inconel 718 Spring Washers permits the annealing and welding without spontaneous hardening during heating and cooling.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel 718 Washer Specifications
Specifications : ASTM B637
Standard : DIN, ASTM, BS and all International Standards
Length : M02 to M33
Size : 3 mm to 200 mm
Type : Flat Washer, Lock Washer, Sealing Washer, Split Washer, Slot Washer, Machine Washer, Star Washer SPRINGS – Wire Spring & Flat Spring
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel 718 Washers Chemical Composition
Grade C Mn Si S Cu Fe Ni Cr
Inconel 718 0.08 max 0.35 max 0.35 max 0.015max 0.30 max 50.00 – 55.00 17.00 – 21.00
Alloy 718 Washer Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 718 8.2 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482 45 %
Equivalent Grades for Inconel Alloy 718 Washer
Inconel 718 2.4668 N07718
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Alloy 718 Washers Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
718 Inconel Washers Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel 718 Washers
inconel 718 washer 500x500 1

Sachiya Steel International offers an extensive range and is a known supplier of Inconel 718 Washers, which can be readily machined in either the annealed or the age – hardened condition.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating: