Sachiya Steel International

Threaded Forged Fittings

Alloy Steel F22 Threaded Forged Fittings Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Alloy Steel F22 Threaded Forged Fittings, which has reasonably good cold working properties and can be moderately drawn and formed in the annealed condition. Because of the wide range of widths and thicknesses and the variety of tempers produced in our Alloy Steel F22 Forged Threaded Elbow Fittings and cut lengths, no flatness tolerances have been established for cold rolled stainless steel.

Flatness on temper rolled in these Alloy Steel F22 Forged Threaded Tee Fittings cannot be guaranteed. This aging treatment in our Alloy Steel F22 Forged Threaded Cross Fittings is so low in temperature that there is no significant distortion. These Alloy Steel F22 Forged Threaded Cap Fittings are therefore well suited to production of long shafts, which require no re – straightening after heat treatment. Parts of our Alloy Steel F22 Forged Threaded Coupling Fittings should be preheated at 350 Degree F / 400 Degree F (180 Degree C / 205 Degree C) to prevent cracking, particularly in heavy sections.

Since these Alloy Steel F22 Forged Threaded Bend Fittings is air hardening, parts should be annealed immediately after welding. Our Alloy Steel F22 Forged Threaded Union Fittings are therefore well suited to production of long shafts, which require no re – straightening after heat treatment. For better machinability, these Alloy Steel F22 Forged Threaded Bushing Fittings reduces annealing temperature to give higher hardness.

Alloy Steel F22 Threaded Forged Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/2″ NB TO 48″ NB.
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Forged Fittings

Alloy Steel F22 Threaded Forged Fittings Chemical Composition

Grade C Mn Si S P Cr Mo
Alloy Steel F22 0.05-0.15 0.3-0.6 0.5 0.03 0.045 0.8-1.25 0.44-0.65

Alloy Steel Grade F22 Threaded Forged Fitting Mechanical Properties

Tensile Strength Yield Strength (0.2%Offset) Elongation
205 415 20 %

Alloy Steel F22 Threaded Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel F22 Threaded Forged Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-11-25T15:23:28+05:30September 14th, 2021|

Alloy Steel F12 Threaded Forged Fittings Manufacturer

Sachiya Steel International is one of the leading manufacturer and exporter of Alloy Steel F12 Threaded Forged Fittings, which provides valuable property combinations peculiarly well suited for aerospace applications. In high – heat treated conditions, these Alloy Steel F12 Forged Threaded Elbow Fittings possesses excellent mechanical properties. Our Alloy Steel F12 Forged Threaded Tee Fittings also provides benefits for other applications requiring high strength and good corrosion resistance – by means of excellent properties at temperatures up to 600 Degree F.

These Alloy Steel F12 Forged Threaded Cross Fittings requires three steps in heat treating including austenite conditioning, cooling to transform the austenite to martensitic, and precipitation hardening. This addition in our Alloy Steel F12 Forged Threaded Cap Fittings is made to reduce or eliminate chromium carbide precipitation – resulting from welding or exposure to high temperatures. These Alloy Steel F12 Forged Threaded Bend Fittings in its cold rolled, hardened and tempered condition is used in countless applications similar to Cold Rolled High Carbon but with the advantages inherent in being excellent alloy and at moderate cost.

Our Alloy Steel F12 Forged Threaded Coupling Fittings in its pre – hardened condition is stocked by us in coils ready for slitting to exact widths for press feed operations or to exact size blanks. These Alloy Steel F12 Forged Threaded Bend Fittings are just machinable, and then can be age hardened to achieve quite high strengths.

Alloy Steel F12 Threaded Forged Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/2″ NB TO 48″ NB.
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Forged Fittings

Alloy Steel F12 Threaded Forged Fittings Chemical Composition

Grade C Mn Si S P Cr Mo
Alloy Steel F12 0.15 max 0.3-0.6 0.5 0.03 0.03 4-6 0.44-0.65

Alloy Steel Grade F12 Threaded Forged Fitting Mechanical Properties

Tensile Strength Yield Strength (0.2%Offset) Elongation
275 485 20 %

Alloy Steel F12 Threaded Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel F12 Threaded Forged Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing 

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-11-25T13:15:28+05:30September 14th, 2021|

Alloy Steel F11 Threaded Forged Fittings Manufacturer

Sachiya Steel International is one of the leading manufacturer and exporter of Alloy Steel F11 Threaded Forged Fittings, which have good creep and oxidation resistance. However, Alloy Steel F11 Forged Threaded Elbow Fittings is not fully stain – proof in low-oxygen, high – salinity, or poor air – circulation environments. We are one of the renowned trader and suppliers of Alloy Steel F11 Forged Threaded Tee Fittings which is a high – chromium alloy having excellent resistance to many corrosive aqueous media and high temperature atmospheres. The resistance of Alloy Steel F11 Forged Threaded Cross Fittings in Nitric acid plus hydrofluoric acid mixtures lends itself to pickle shop duties.

Alloy Steel F11 Forged Threaded Coupling Fittings is also known as high performance alloys, and can be formed in different shapes. In addition to its corrosion resistance, Alloy Steel F11 Forged Threaded Cap Fittings has high strength, good metallurgical stability and favorable fabrication characteristics. The high chromium content gives Alloy Steel F11 Forged Threaded Cross Fittings excellent resistance to aqueous corrosion by oxidizing acids (especially nitric acid) and salts and to suffixation at high – temperatures.

Alloy Steel F11 Forged Threaded Bend Fittings is a precipitation hardened steel that provides high strength and hardness, excellent fatigue properties, good corrosion resistance, good formability, and minimum distortion upon heat treatment. The formability of Alloy Steel F11 Forged Threaded Union Fittings is good for its yield strength and hardness range.

Alloy Steel F11 Threaded Forged Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/2″ NB TO 48″ NB.
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Forged Fittings

Alloy Steel F11 Threaded Forged Fittings Chemical Composition

Grade C Mn Si S P Cr Mo
Alloy Steel F11 0.05-0.15 0.3-0.6 0.5-1 0.03 0.03 1-1.5 0.044-0.65

Alloy Steel Grade F11 Threaded Forged Fitting Mechanical Properties

Tensile Strength Yield Strength (0.2%Offset) Elongation
205 415 20 %

Alloy Steel F11 Threaded Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel F11 Threaded Forged Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-11-25T12:54:18+05:30September 13th, 2021|

Alloy Steel F9 Threaded Forged Fittings Manufacturer

Sachiya Steel International is one of the leading manufacturer and exporter of Alloy Steel F9 Threaded Forged Fittings, which is used where both the properties of steel and corrosion resistance are required. The exposure to chlorides of these Alloy Steel F9 Forged Threaded Elbow Fittings in everyday activities (e.g., food preparation, sports activities, etc.) is generally satisfactory when proper cleaning is performed after exposure to use. This also influences its use in commercial kitchens and food processing plants, as our Alloy Steel F9 Forged Threaded Tee Fittings can be steam – cleaned and sterilized and does not need paint or other surface finishes.

These Alloy Steel F9 Forged Threaded Cross Fittings can be utilized in a number of capacities and applications including, pump shafts, valve components, and automatic screw machine parts. Our Alloy Steel F9 Forged Threaded Cap Fittings is notable for its corrosion resistance, and it is widely used for food handling and cutlery among many other applications. These Alloy Steel F9 Forged Threaded Bend Fittings differs from carbon steel by the amount of chromium present, where unprotected carbon steel rusts readily when exposed to air and moisture.

This iron oxide film (the rust) is active and accelerates corrosion by making our Alloy Steel F9 Forged Threaded Coupling Fittings easier for more iron oxide to form. These Alloy Steel F9 Forged Threaded Union Fittings does not readily corrode, rust or stain with water as ordinary steel does.

Alloy Steel F9 Threaded Forged Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/2″ NB TO 48″ NB.
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Forged Fittings

Alloy Steel F9 Threaded Forged Fittings Chemical Composition

Grade C Mn Si S P Cr Mo
Alloy Steel F9 0.15 0.3-0.6 0.5-1 0.03 0.03 8-10 0.9-1.1

Alloy Steel Grade F9 Threaded Forged Fitting Mechanical Properties

Tensile Strength Yield Strength (0.2%Offset) Elongation
380 585 20 %

Alloy Steel F9 Threaded Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel F9 Threaded Forged Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-11-25T17:06:13+05:30September 13th, 2021|

Alloy Steel F5 Threaded Forged Fittings Manufacturer

Sachiya Steel International is One Of The Leading Manufacturer And Exporter of Alloy Steel F5 Threaded Forged Fittings, which should be machined in the annealed condition using surface speeds. The parts should then be Alloy Steel F5 Forged Threaded Elbow Fittings which is generally considered to be weldable by the common fusion and resistance techniques. For maximum corrosion resistance to chemical environments, it is essential that the surface of Alloy Steel F5 Forged Threaded Tee Fittings be free of all heat tint or oxide formed during annealing or hot working. All surfaces of Alloy Steel F5 Forged Threaded Cross Fittings must be ground or polished to remove any traces of oxide and surface decarburization.

Alloy Steel F5 Forged Threaded Cap Fittings useful for storing and handling acetic acid, especially in solutions where it is combined with formic acid and when aeration is not present (oxygen helps protect stainless steel under such conditions), though it provides the greatest level of resistance to corrosion. Alloy Steel F5 Forged Threaded Bend Fittings can be used in continuous service up to 1300 Degree F (705 Degree C), where scaling becomes excessive above 1500 Degree F (811 Degree C) in intermittent service.

There are various sizes, shapes and surface finishes of Alloy Steel F5 Forged Threaded Coupling Fittings to suit the environment the alloy must endure. Alloy Steel F5 Forged Threaded Union Fittings is used for corrosion – resistant tools such as this nutcracker.

Alloy Steel F5 Threaded Forged Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/2″ NB TO 48″ NB.
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Forged Fittings

Alloy Steel F5 Threaded Forged Fittings Chemical Composition

Grade C Mn Si S P Cr Mo
Alloy Steel F5 0.15 max 0.3-0.6 0.5 0.03 0.03 4-6 0.044-0.65

Alloy Steel Grade F5 Threaded Forged Fitting Mechanical Properties

Tensile Strength Yield Strength (0.2%Offset) Elongation
275 485 20 %

Alloy Steel F5 Threaded Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel F5 Threaded Forged Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-11-25T16:42:06+05:30September 11th, 2021|

Alloy Steel F1 Threaded Forged Fittings Manufacturer

Sachiya Steel International is One Of The Leading Manufacturer And Exporter of Alloy Steel F1 Threaded Forged Fittings, which are designed for high hardness and at times other properties are to some degree compromised. The dual stabilization in these Alloy Steel F1 Forged Threaded Elbow Fittings prevents carbide sensitization during welding and high temperature exposure, and makes the alloy non harden able by heat treatment. Most compositions of our Alloy Steel F1 Forged Threaded Tee Fittings include molybdenum; some, aluminum or titanium. Corrosion resistance in these Alloy Steel F1 Forged Threaded Cross Fittings is lower than the common austenitic grades.

As a result, useful operating range of our Alloy Steel F1 Forged Threaded Cap Fittings is limited by their loss of ductility at sub – zero temperatures and loss of strength by over – tempering at elevated temperatures. These Alloy Steel F1 Forged Threaded Bend Fittings may not to be confused with AISI grade and air hardening alloy tool steel containing about 5 % chromium.

A typical composition of 18 % chromium and 10 % nickel in our Alloy Steel F1 Forged Threaded Coupling Fittings, commonly known as 18 / 10 alloy, is often used in cutlery and high – quality cookware. The second most common austenite steel is these Alloy Steel F1 Forged Threaded Union Fittings, also referred to as excellent alloy and called as marine grade alloy, used primarily for its increased resistance to corrosion.

Alloy Steel F1 Threaded Forged Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/2″ NB TO 48″ NB.
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Forged Fittings

Alloy Steel F1 Threaded Forged Fittings Chemical Composition

Grade C Mn Si S P Cr Mo
Alloy Steel F1 0.15 max 0.3-0.6 0.5 0.03 0.03 4-6 0.44-0.65

Alloy Steel Grade F1 Threaded Forged Fitting Mechanical Properties

Tensile Strength Yield Strength (0.2%Offset) Elongation
275 485 20 %

Alloy Steel F1 Threaded Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel F1 Threaded Forged Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-11-25T12:35:41+05:30September 11th, 2021|

Incoloy 925 Threaded Forged Fittings Manufacturer In India

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 925 Threaded Forged Fittings, which is recommended amongst the clients for their availability in various sizes and specifications. Incoloy 925 Forged Threaded Elbow (UNS N09925) is used for surface and down – hole hardware in sour gas wells and for oil – production equipment. Incoloy 925 Forged Threaded Tee is also used in Fasteners, Pump and marine shafting, Strong, seamless piping and tubing, etc.

Incoloy 925 Forged Threaded Cross can be machined using conventional machining methods which are used for iron based alloys. A combination of high strength and corrosion resistance in Incoloy 925 Forged Threaded Cap make it suitable in applications such as valves, hangers, packers, and tubulars, in sour gas environments. Meanwhile, these Incoloy 925 Forged Threaded Fittings are also being offered in different sizes and shapes to our customers. Application requiring a combination of high strength and corrosion resistance may consider Incoloy 925 Forged Threaded Coupling.

Incoloy 925 Threaded Forged Fittings | Incoloy 925 Threaded Forged Fittings | Incoloy 925 Threaded Forged Fittings | Incoloy 925 Threaded Forged Fittings | Incoloy 925 Threaded Forged Fittings | 

Sufficient nickel content in Incoloy 925 Forged Threaded Union provides protection against chloride – ion stress – corrosion cracking whilst in conjunction with the added copper and molybdenum resistance to reducing chemicals is enjoyed. Many different industries rely on Incoloy 925 Forged Threaded Bushing for a number of uses including: pump shafts and marine fasteners. On the other hand, molybdenum and copper Incoloy 925 Forged Threaded Plug are added to increase its resistance to corrosive media..

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 925 Threaded Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Incoloy 925 Forged Threaded Fittings Chemical Composition

Grade Ni Cr Fe Si Mo Cu Mn C S Al
Incoloy 925 42 – 46 19.55 – 22.5 22 min 0.5 max 2.5 – 3.5 1.5 – 3.0 1.0 max 0.03 max 0.03 max 0.1 – 0.5

Incoloy 925 Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.14 g/cm3 1343°C 650 300 30 %

Equivalent Grades for 925 Incoloy Forged Threaded Fittings

STANDARD WERKSTOFF NR. UNS
Incoloy 925 – N09925
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Incoloy 925 Forged Threaded Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Incoloy 925 Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 925 Threaded Forged Fittings
incoloy 825 forged fittings

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 925 Threaded Forged Fittings, which is recommended amongst the clients for their availability in various sizes and specifications.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-09-09T10:57:34+05:30September 9th, 2021|

Incoloy 825 Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 825 Threaded Forged Fittings, which has some excellent features such as cost effectiveness, rugged design, durable finish and more. Incoloy 825 Forged Threaded Elbow (UNS N08825) is an austenitic nickel – iron – chromium – molybdenum – copper alloy containing high levels of chromium, molybdenum, nickel and copper to provide high levels of corrosion resistance to both moderately oxidizing and moderately reducing environments. Incoloy 825 Forged Threaded Tee is used in chemical processing, nuclear fuel reprocessing, acid production, propeller shafts and oil and gas well piping.

The hot – working range for Incoloy 825 Forged Threaded Cross is 1600 to 2150 Degree F, where most any commercial coolant may be used in the machining operations. Meanwhile, these Incoloy 825 Forged Threaded Cap are also being offered in different sizes and shapes to our customers. The molybdenum in Incoloy 825 Forged Threaded Fittings prevents resistance to pitting and crevice corrosion. Incoloy 825 Forged Threaded Coupling is also used in chemical process equipment, propeller tubes, tank trucks; and spent nuclear fuel element recovery.

The high nickel content gives Incoloy 825 Forged Threaded Union exceptional resistance to general corrosion, pitting, crevice corrosion, inter – granular corrosion as well as stress corrosion cracking. These Incoloy 825 Forged Threaded Bushing has excellent resistance to reducing and oxidizing acids, along with good resistance to stress – corrosion cracking.

Incoloy 825 Threaded Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Incoloy 825 Forged Threaded Fittings Chemical Composition

Grade C Mn Si P S Cr Cu Ni Fe
Incoloy 825 0.05 max 1.00 max 0.5 max – 0.030 max 19.50 – 23.50 1.50 – 3.00 38.00 – 46.00 22.00 min

Incoloy 825 Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

Equivalent Grades for 825 Incoloy Forged Threaded Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo

Incoloy 825 Forged Threaded Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Incoloy 825 Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-01-20T19:30:21+05:30September 9th, 2021|

Inconel 718 Threaded Forged Fittings Manufacturers In India

Inconel 718 Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Inconel 718 Threaded Forged Fittings to the clients, which are tested for its quality before being introduced in the market. Inconel 718 Forged Threaded Elbow (UNS N07718) also exhibits excellent tensile and impact strength. Inconel 718 Forged Threaded Tee has better mechanical properties at lower temperatures than Neonic 90 Forged Fittings and Inconel X – 750 Forged Threaded Fittings. Inconel 718 Forged Threaded Cross has been used for jet engine and high – speed airframe parts such as wheels, buckets, spacers, and high temperature bolts and fasteners.

Inconel 718 Forged Threaded Cap is also used in gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling. Inconel 718 Forged Threaded Fittings has excellent weldability compared to the nickel – base super alloys hardened by Aluminum and Titanium. Meanwhile, these Inconel 718 Forged Threaded Coupling are also being offered in different sizes and shapes to our customers. Inconel 718 Forged Threaded Union has excellent strength from -423 degrees F to 1300 degrees F (-253 degrees C to 705 degrees C).

Inconel 718 Threaded Forged Fittings

These Inconel 718 Forged Threaded Bushing combines corrosion resistance and high strength with outstanding weldability, including resistance to post – weld cracking. To reap the best costs and performance benefits from metal additive layer manufacturing, aerospace applications focus on complex components made of high-value materials such as Inconel 718 Forged Threaded Plug.

Inconel 718 Threaded Forged Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Inconel 718 Forged Threaded Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Inconel 718 0.08 max 0.35 max 0.35 max 0.015max 0.30 max – 50.00 – 55.00 17.00 – 21.00

Inconel 718 Threaded Fitting Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 718 8.2 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482 45 %

Equivalent Grades for 718 Inconel Forged Threaded Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 718 2.4668 N07718 – – – – –

Inconel 718 Forged Threaded Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 718 Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-26T15:40:36+05:30September 8th, 2021|

Incoloy 800 Threaded Forged Fittings Manufacturers In India

Incoloy 800 Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 800 Threaded Forged Fittings, where our products are used for fitting purpose in number of applications. Incoloy 800 Forged Threaded Elbow (UNS N08800) is extremely resistant to corrosion, even in acidic environment. Incoloy 800H Forged Threaded Tee (UNS N08810) is excellent resistance to oxidation, suffixation, and carburization. Heat treatment retorts, muffles jigs and fixtures have also used these Incoloy 800HT Forged Threaded Cross (UNS N08811) to a great effect.

Our Alloy 800 Forged Threaded Fittings are resistant to embrittlement from precipitation of sigma phase and chloride stress – corrosion cracking due to the nickel content. The higher strength in this Alloy 800H Forged Threaded Coupling results from close control of carbon, aluminum and titanium contents in conjunction by means of a high temp anneal. Meanwhile, our Alloy 800HT Forged Threaded Union are also being offered in different sizes and shapes to our customers.

Incoloy 800 Threaded Forged Fittings

Whether for hot working or cold working, these Incoloy 800 Forged Threaded Bushing offer workability similar to austenitic stainless steels. Our Incoloy 800H Forged Threaded Plug is commonly welded using bare wire for a number of applications under 1450 Degree F. These Incoloy 800 Forged Threaded Hex Plus was the first of these alloys and it was slightly modified into Incoloy 800H Forged Threaded Hexagonal Plus.

Incoloy 800 Threaded Forged Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Incoloy 800/800H/800HT Forged Threaded Fittings Chemical Composition

Grade C Mn Si P S Cr Cu Ni Fe
Incoloy 800 0.10 max 1.50 max 1.00 max – 0.015 max 19.00 – 23.00 0.75 max 30.0 – 35.0 39.50 min
Incoloy 800H 0.05 – 0.10 1.50 max 1.00 max – 0.015 max 19.00 – 23.00 0.75 max 30.0 – 35.0 39.50 min
Incoloy 800HT 0.06 – 0.10 1.50 max 1.00 max – 0.015 max 19.00 – 23.00 0.75 max 30.0 – 35.0 39.50 min

Incoloy 800/800H/800HT Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %

Equivalent Grades for 800/800H/800HT Incoloy Forged Threaded Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC32-21 X5NiCrAlTi31-20
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 – X8NiCrAlTi32-21

Incoloy 800/800H/800HT Forged Threaded Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Incoloy 800/800H/800HT Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-10T16:56:44+05:30September 8th, 2021|

SACHIYA STEEL INTERNATIONAL

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top