Threaded Forged Fittings

Nickel Alloy 201 Threaded Forged Fittings Manufacturers In India

Nickel Alloy 201 Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High quality Nickel Alloy 201 Threaded Forged Fittings, which belongs to the transition metals and is hard and ductile. An important reason for its success is that the corrosion product of Nickel 201 Forged Threaded Elbow, such as nickel chloride, has a relatively low solubility in this range of concentration. Because of this reason, Nickel 201 Forged Threaded Tee should be used only with caution when solutions are at high velocity.

Nickel Alloy 201 Threaded Forged Fittings

Nickel 201 Forged Threaded Cross is a chemical element, where it is a silvery-white lustrous metal with a slight golden tinge. Nickel 201 Forged Threaded Cap, powdered to maximize the reactive surface area, shows a significant chemical activity, but larger pieces are slow to react with air under standard conditions because an oxide layer forms on the surface and prevents further corrosion (passivation). Nickel 201 Forged Threaded Fittings has excellent resistance to anhydrous hydrofluoric acid even at elevated temperatures. In aqueous solutions for Nickel 201 Forged Threaded Coupling, however, service is usually limited to below 180 Degree F (80 Degree C).

Nickel 201 Forged Threaded Union has limited usefulness in commercial phosphoric acid solutions. Nickel 201 Forged Threaded Bushing usually contain impurities such as fluorides and ferric salts that accelerate corrosion. If oxidizing salts are present in any but very small amounts, corrosion of Nickel 201 Forged Threaded Plug will be increased.

Nickel Alloy 201 Threaded Forged Fittings Specifications

Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2010 LBS, 3000 LBS, 2010 LBS, 9000 LBS
Type : Threaded Fittings

Nickel 201 Forged Threaded Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni
201 0.02 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel 201 Threaded Fitting Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 201 Nickel Forged Threaded Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 LC-Ni 99

Nickel 201 Forged Threaded Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel 201 Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-13T14:45:12+05:30September 20th, 2021|

Nickel Alloy 200 Threaded Forged Fittings Manufacturers In India

Nickel Alloy 200 Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Nickel Alloy 200 Threaded Forged Fittings. Typically, the elemental restrictions of both, Nickel 200 Forged Threaded Elbow (UNS N02200) and Nickel 201 Forged Fittings (UNS N02201) are combined into one and dual – certified chemistry resulting in a single alloy with the desired characteristics of both alloys. Other useful features of Nickel 200 Forged Threaded Tee are its magnetic and magneto strictive properties, high thermal and electrical conductivities, low gas content and low vapor pressure.

Nickel Alloy 200 Threaded Forged Fittings

Nickel 200 Forged Threaded Cross are often used in Synthetic Fiber Production, Processes where Sodium Hydroxide is used, Food Processing, and more. Meanwhile, these Nickel 200 Forged Threaded Cap are also being offered in different sizes and shapes to our customers. Nickel 200 Forged Threaded Fittings has outstanding resistance to caustic alkalis up to and including the molten state. In acid, alkaline and neutral salt solutions, Nickel 200 Forged Threaded Coupling shows good resistance, but in oxidizing salt solutions severe attack will occur.

Nickel 200 Forged Threaded Union is considered resistant to potable water with up to about 200 mg / L chlorides at ambient temperatures, reducing to about 150 mg / L at 60 Degree C. Nickel 200 Forged Threaded Bushing is used for a variety of household and industrial applications such as screws, machinery parts, car headers, and food – handling equipment.

Nickel Alloy 200 Threaded Forged Fittings Specifications

Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 2000 LBS, 9000 LBS
Type : Threaded Fittings

Nickel 200 Forged Threaded Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni
200 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel 200 Threaded Fitting Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
200 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 200 Nickel Forged Threaded Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2

Nickel 200 Forged Threaded Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel 200 Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-13T17:33:37+05:30September 20th, 2021|

Monel Alloy K500 Threaded Forged Fittings Manufacturers In India

Monel Alloy K500 Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Monel Alloy K500 Threaded Forged Fittings, where our expert professionals make use of excellent quality material in the production process. Typical applications for our Monel K500 Forged Threaded Elbow (UNS N05500) are pump shafts and impellers; doctor blades and scrapers; oil – well drill collars and instruments; electronic components; springs; and valve trim. These Monel K500 Forged Threaded Tee is a nickel – copper alloy, precipitation harden able through additions of aluminum and titanium.

Our Monel K500 Forged Threaded Cross has approximately three times the yield strength and double the tensile strength when compared with Monel 400 Forged Threaded Cross Fittings. These Monel K500 Forged Threaded Cap also has excellent corrosion resistance together with increased strength and hardness of that of Alloy 400. Meanwhile, our Monel K500 Forged Threaded Fittings are also being offered in different sizes and shapes to our customers. These Monel K500 Forged Threaded Coupling can be readily joined and fabricated, which further has excellent mechanical properties at subzero temperatures.

Monel Alloy K500 Threaded Forged Fittings

By proper control of the amount of hot or cold work and by the selection of appropriate thermal treatments, finished fabrications in our Monel K500 Forged Threaded Union can be produced to a rather wide range of mechanical properties. These Monel K500 Forged Threaded Bushing is used in the section of Alkylation units in direct contact with concentrated hydrofluoric acid.

Monel K500 Threaded Fittings Specifications

Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, K5000 LBS, 9000 LBS
Type : Threaded Fittings

Monel K500 Forged Threaded Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni
K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min

Monel K500 Threaded Fitting Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
K500 8.44 g/cm3 1350 °C (2460 °F) Psi – 160000 , MPa – 1100 Psi – 115000 , MPa – 790 20 %

Equivalent Grades for K500 Monel Forged Threaded Fittings

STANDARD WERKSTOFF NR. UNS
Monel K500 2.4375 N05500

Monel K500 Forged Threaded Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy K500 Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-16T17:12:35+05:30September 18th, 2021|

Monel 400 Threaded Forged Fittings Manufacturers In India

Monel 400 Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Monel 400 Threaded Forged Fittings, which has some excellent features to offer such as precise dimensions, resistant to corrosion, free from any kind of maintenance, and more. Our Monel 400 Forged Threaded Bushing (UNS N04400) does work – harden during machining and has higher strength and “gumminess” not typical of steels. These Monel 400 Forged Threaded Plug are nickel – based alloys that contain between 29 percent and 34 percent of copper.

Although the grade can be tempered or cold worked to increase its properties, our Monel 400 Forged Threaded Cap is supplied in the annealed condition as standard. The conventional machining techniques used on iron alloys may perhaps be used for these Monel 400 Forged Threaded Elbow Forged. Meanwhile, our Monel 400 Forged Threaded Coupling are also being offered in different sizes and shapes to our customers. These Monel 400 Forged Threaded Tee are often known as nickel and chromium alloys, nickel – chromium – iron alloys as well as nickel and molybdenum alloys which are alloys associated with high – temperature resistant properties.

Monel 400 Threaded Forged Fittings

Our Monel 400 Forged Threaded Union is being used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners, and heat exchangers. These Monel 400 Forged Threaded Fittings is also used as part of metal instruments and frames of eyeglasses.

Monel 400 Threaded Fittings Specifications

Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 4000 LBS, 9000 LBS
Type : Threaded Fittings

Monel 400 Forged Threaded Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni
 400 0.30 max 2.00 max 0.50 max 0.024 max 28.00 – 34.00 2.50 max 63.00 min

Monel 400 Threaded Fitting Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %

Equivalent Grades for 400 Monel Forged Threaded Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
 400 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe

Monel 400 Forged Threaded Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 400 Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-19T13:14:49+05:30September 18th, 2021|

Hastelloy X Threaded Forged Fittings Manufacturers In India

Hastelloy X Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy X Threaded Forged Fittings in a wide range, which has some excellent features to offer such as high tensile strength, fine finish standards, abrasion resistant, and more. Although Hastelloy X Forged Threaded Elbow Fittings (UNS N06002) is primarily noted for heat and oxidation resistance, it also has good resistance to chloride stress – corrosion cracking and has good resistance to carburization, excellent resistance to reducing or carburizing atmospheres. Oxidation resistance of Hastelloy X Forged Threaded Tee Fittings is excellent up to 2200 Degree F.

Hastelloy X Forged Threaded Cross Fittings has excellent forming and welding characteristics. Hastelloy X Forged Threaded Cap Fittings also has performed well in jet engine tailpipes, afterburner components, cabin heaters, and other aircraft parts. Meanwhile, these Hastelloy X Forged Threaded Bend Fittings are also being offered in customized sizes and shapes to our customers. Typical operating temperatures of Hastelloy X Forged Threaded Coupling Fittings are 500 Degree F to -20 Degree F.

Hastelloy X Threaded Forged Fittings

Hastelloy X Forged Threaded Union Fittings can be bent up to 180 degrees with a maximum allowable thinning of 10 % and flattening of 8 % depending on tube OD and wall thickness and will maintain their physical properties. Hastelloy X Forged Threaded Plug Fittings can be ultrasonically tested in immersion and / or Mag Particle tested to ensure integrity after drilling. The weld is still good, where this is just a characteristic of Hastelloy X Forged Threaded Bushing Fittings.

Hastelloy X Threaded Forged Fittings Specifications

Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

Hastelloy X Forged Threaded Fittings Chemical Composition

Grade Ni Mo Cr Fe Mn C Co Si P S
X Balance 8.0 -10.0 20.50 – 23.00 17.00 – 20.00 1.00 max 0.05 – 0.15 0.50 – 2.50 1.00 max 0.04 max 0.03 max

Hastelloy X Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.22 g/cm³ 1355°C 655 MPa 240 MPa 35%

Equivalent Grades for X Hastelloy Forged Threaded Fittings

STANDARD WERKSTOFF NR. UNS
Hastelloy X 2.4665 N06002

Hastelloy X Forged Threaded Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy X Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-11T13:33:02+05:30September 17th, 2021|

Hastelloy B3 Threaded Forged Fittings Manufacturers In India

Hastelloy B3 Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Hastelloy B3 Threaded Forged Fittings, where it is the duty of our team members to check these products for any kind of finishing flaw thereby attaining utmost contentment of the customers. Hastelloy B3 Forged Threaded Elbow Fittings (UNS N10675) also has excellent resistance to pitting corrosion and to stress-corrosion cracking. Hastelloy B3 Forged Threaded Tee Fittings also withstands sulfuric, acetic, formic and phosphoric acids, and other non-oxidizing media. Hastelloy B3 Forged Threaded Cross Fittings is a nickel – molybdenum alloy with excellent resistance to pitting, corrosion and stress-corrosion cracking, plus thermal stability superior to that of alloy B-2.

Hastelloy B3 Forged Threaded Cap Fittings has greatly improved structural stability compared with previous B-type alloys, leading to fewer concerns during welding, fabrication, and service. Meanwhile, these Hastelloy B3 Forged Threaded Bend Fittings are also being offered in customized sizes and shapes to our customers. Titanium nitrides and carbides in Hastelloy B3 Forged Threaded Coupling Fittings are visible in polished micro – specimens at magnifications of 50X or greater.

Hastelloy B3 Threaded Forged Fittings

Hastelloy B3 Forged Threaded Union Fittings appear as small, randomly dispersed, angular – shaped inclusion, where the color varies from orange – yellow for the nitride to gray – lavender for the carbide. These nitrides and cyan nitrides in Hastelloy B3 Forged Threaded Plug Fittings are stable at all temperatures below the melting point and are unaffected by heat treatment.

Hastelloy B3 Threaded Forged Fittings Specifications

Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

Hastelloy B3 Forged Threaded Fittings Chemical Composition

Grade Ni Mo Cr Fe W Mn C Al Ti Si
Hastelloy B3 65.0 min 28.5 1.5 1.5 3.0 max 3.0 max 0.01 max 0.50 max 0.2 max 10 max

Hastelloy B3 Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
9.2 g/cm3 1370 °C (2550 °F) Psi – 1,15,000 , MPa –760 Psi – 52,000 , MPa – 350 40%

Equivalent Grades for B3 Hastelloy Forged Threaded Fittings

STANDARD WERKSTOFF NR. UNS
Hastelloy B3 2.4600 N010675

Hastelloy B3 Forged Threaded Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy B3 Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-16T19:11:36+05:30September 17th, 2021|

Hastelloy B2 Threaded Forged Fittings Manufacturer In India

Hastelloy B2 Threaded Forged Fittings Manufacturer In India

Sachiya Steel International is one of the leading manufacturer and exporter of High Quality Hastelloy B2 Threaded Forged Fittings, which are made in cohesion with the universally defined quality standards and norms. Due to the presence of high molybdenum content, our Hastelloy B2 Forged Threaded Elbow Fittings (UNS N10665) is expensive. These Hastelloy B2 Forged Threaded Tee Fittings is one of the most popular nickel steel alloys for a reason. Our Hastelloy B2 Forged Threaded Cross Fittings provides resistance to pure sulfuric acid and a number of non – oxidizing acids.

These Hastelloy B2 Forged Threaded Cap Fittings can be used in the as-welded condition because it resists the formation of grain – boundary carbide precipitates in the weld heat – affected zone. Our Hastelloy B2 Forged Threaded Bend Fittings with restricted chemistry can be used in the welded condition and is less susceptible to SCC under many conditions. Meanwhile, our Hastelloy B2 Forged Threaded Coupling Fittings are also being offered in customized sizes and shapes to our customers. These Hastelloy B2 Forged Threaded Union Fittings prevents carburization and suffixation at the elevated temperatures.

Hastelloy B2 Threaded Forged Fittings

Our Hastelloy B2 Forged Threaded Bushing Fittings suitably prevents the development of grain boundary precipitates in the weld heated region and is easily weldable by gas tungsten arc, gas metal arc or shielded metal welding methods. These Hastelloy B2 Forged Threaded Plug Fittings is also resistant to severe corrosion caused by metal chlorides in the boilers containing municipal solid waste.

Hastelloy B2 Threaded Forged Fittings Specifications

Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

Hastelloy B2 Forged Threaded Fittings Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
B2 0.01 max 1.00 max 0.08 max 0.03 max 2.50 max 50.99 min* 14.50 – 16.50 4.00 – 7.00 15.0 – 17.0 0.04 max

Hastelloy B2 Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52000 , MPa – 355 40 %

Equivalent Grades for B2 Hastelloy Forged Threaded Fittings

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
B2 2.4617 N10665 NW 0276 ХН65МВУ NiMo16Cr15W ЭП760

Hastelloy B2 Forged Threaded Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy B2 Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-18T15:30:20+05:30September 16th, 2021|

Hastelloy C276 Threaded Forged Fittings Manufacturer In India

Hastelloy C276 Threaded Forged Fittings Manufacturer In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Hastelloy C276 Threaded Forged Fittings, which is available in variegated specifications which suits diverse requirements of our esteemed customers. Hastelloy C276 Forged Threaded Elbow Fittings (UNS N10276) has resisted the formation of grain boundary precipitates in the weld heat – affected zone, making it a candidate for most chemical and petrochemical processing applications in the as – welded condition. Hastelloy C276 Forged Threaded Tee Fittings has exceptional resistance to a wide variety of chemical environments.

Hastelloy C276 Forged Threaded Cross Fittings is resistant to the formation of grain boundary precipitates in the weld heat – affected zone, thus making it suitable for most chemical process application in an as welded condition. Hastelloy C276 Forged Threaded Cap Fittings is weldable by all common methods except that excessive heat input should be avoided. Meanwhile, these Hastelloy C276 Forged Threaded Bend Fittings are also being offered in customized sizes and shapes to our customers. Hastelloy C276 Forged Threaded Coupling Fittings show only slightly better non – corrosive properties than straight carbon – steels, and the reason for their wide use is the high physical properties which will be brought about by heat -treatment.

Hastelloy C276 Threaded Forged Fittings

All of the common methods of welding can be used in Hastelloy C276 Forged Threaded Union Fittings, although the oxyacetylene and submerged arc processes are not recommended when the fabricated item is for use in corrosion service.

Hastelloy C276 Threaded Forged Fittings Specifications

Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

Hastelloy C276 Forged Threaded Fittings Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
C276 0.01 max 1.00 max 0.08 max 0.03 max 2.50 max 50.99 min* 14.50 – 16.50 4.00 – 7.00 15.0 – 17.0 0.04 max

Hastelloy C276 Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52000 , MPa – 355 40 %

Equivalent Grades for C276 Hastelloy Forged Threaded Fittings

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
C276 2.4819 N10276 NW 0276 ХН65МВУ NiMo16Cr15W ЭП760

Hastelloy C276 Forged Threaded Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy C276 Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-15T17:04:06+05:30September 16th, 2021|

Alloy Steel F91 Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the leading Manufacturer And Exporter of Alloy Steel F91 Threaded Forged Fittings, which is not recommended for use in temperatures above the relevant tempering temperature, because of reduction in mechanical properties. Our Alloy Steel F91 Forged Threaded Elbow Fittings has highly resistant to stress corrosion cracking if aged at 550 Degree C or higher, where higher aging temperatures give better SCC resistance. Heat this Alloy Steel F91 Forged Threaded Tee Fittings uniformly up to 1200 Degree F / 1400 Degree F (650 Degree C / 760 Degree C) along with air cool.

For maximum softness, heat this Alloy Steel F91 Forged Threaded Cross Fittings up to 1500 Degree F / 1650 Degree F (815 Degree C / 900 Degree C) along with slow furnace cool. Temper this Alloy Steel F91 Forged Threaded Cap Fittings at temperatures appropriate to produce desired mechanical properties. If this Alloy Steel F91 Forged Threaded Coupling Fittings is tempered in the range 750 Degree F / 1050 Degree F (400 Degree C / 565 Degree C), there will be a decrease in impact strength and in corrosion resistance – depending upon the media.

Alloy Steel F91 Threaded Forged Fittings

The tempering range 425 Degree C – 600 Degree C in this Alloy Steel F91 Forged Threaded Bend Fittings should be avoided. Meanwhile, the scaling temperature of our Alloy Steel F91 Forged Threaded Bushing Fittings should be approximately temperature of 650 Degree C.

Alloy Steel F91 Threaded Forged Fittings Specifications

Specifications : ASTM A182 & ASME SA182
Size : 1/2″ NB TO 48″ NB.
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Forged Fittings

Alloy Steel F91 Threaded Forged Fittings Chemical Composition

Grade C Mn Si S P Cr Mo
Alloy Steel F91 0.08-0.12 0.3-0.6 0.5 0.01 0.02 8.5-9.5 0.85-1.05

Alloy Steel Grade F91 Threaded Forged Fitting Mechanical Properties

Tensile Strength Yield Strength (0.2%Offset) Elongation
415 585 20 %

Alloy Steel F91 Threaded Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel F91 Threaded Forged Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-06T12:12:19+05:30September 15th, 2021|Threaded Forged Fittings|

Hastelloy C22 Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Hastelloy C22 Threaded Forged Fittings to the esteemed clients, which are designed and engineered utilizing advanced technology and high quality metals. Hastelloy C22 Forged Threaded Elbow Fittings (UNS N06022) has shown an outstanding resistance to a wide range of chemicals, including chlorides, organic and inorganic solutions. Hastelloy C22 Forged Threaded Tee Fittings also has excellent resistance to oxidizing aqueous media including wet chlorine and mixtures containing nitric acid or oxidizing acids with chlorine ions.

Hastelloy C22 Threaded Forged Fittings

Hastelloy C22 Forged Threaded Cross Fittings has better overall corrosion resistance than Hastelloy C-4 & C-276 and Inconel 625. Meanwhile, these Hastelloy C22 Forged Threaded Cap Fittings are as well being offered in customized sizes and shapes to our customers. We also offer Hastelloy C22 Forged Threaded Bend Fittings at market leading rates. Annealing of Hastelloy C22 Forged Threaded Coupling Fittings can be performed at a temperature range between the ranges of 2020 Degree F – 2150 Degree F followed by a rapid quench.

Cooling of Hastelloy C22 Forged Threaded Union Fittings at an accelerated rate avoids the formation of detrimental phases which form between the ranges of 1400 Degree F – 1800 Degree F. Hastelloy C22 Forged Threaded Bushing Fittings also offers optimum resistance to environments where reducing and oxidizing conditions are encountered in process streams. Hastelloy C22 Forged Threaded Plug Fittings is beneficial in multi – purpose plants where such “upset” conditions occur frequently.

Hastelloy C22 Threaded Fittings Specifications

Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

Hastelloy C22 Forged Threaded Fittings Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
C22 0.010 max 0.50 max 0.08 max 0.02 max 2.50 max 50.015 min* 20.00 – 22.50 2.00 – 6.00 12.50 – 14.50 0.02 max

Hastelloy C22 Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %

Equivalent Grades for C22 Hastelloy Forged Threaded Fittings

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
 C22 2.4602 N06022 NW 6022 NiCr21Mo14W

Hastelloy C22 Forged Threaded Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy C22 Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-06T12:25:24+05:30September 15th, 2021|Threaded Forged Fittings|
Go to Top