Sachiya Steel International

Socket Weld Fittings

Hastelloy C22 Socket Weld Fittings Manufacturers In India

Hastelloy C22 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy C22 Socket Weld Fittings, which offers high ductility in notched sections. Hastelloy C22 Forged Socket Weld Elbow Fittings also be successfully deep – drawn, spun, press formed or punched, although the alloy tends to work – harden. Parts of Hastelloy C22 Forged Socket Weld Tee Fittings which have been hot formed or severely cold formed should be heat treated at 2050 Degree F and rapid quenched prior to final fabrication or installation.

Some of the areas of present or potential use for Hastelloy C22 Forged Socket Weld Cap Fittings are: Acetic acid / Acetic Anhydride, cellophane manufacturing, chlorine spargers, chlorination systems, circuit board etching equipment, complex acid / chemical mixtures. Hastelloy C22 Forged Socket Weld Coupling Fittings has outstanding resistance to both reducing and oxidizing media, and because of its versatility can be used where “upset” conditions are likely to occur or in multipurpose plants.

Hastelloy C22 Socket Weld Fittings

Hastelloy C22 Forged Socket Weld Cross Fittings has exceptional resistance to a wide variety of chemical process environments, including strong oxidizers such as ferric and cupric chlorides, hot contaminated media (organic and inorganic), chlorine, formic and acetic acids, acetic anhydride, and seawater and brine solutions. Hastelloy C22 Forged Socket Weld Union Fittings resists the formation of grain boundary precipitates in the weld heat affected zone, thus making it suitable for most chemical process applications in the as – welded condition.

Hastelloy C22 Socket Weld Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Hastelloy Alloy C22 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Co Mo Ni Fe Cr
Hastelloy C22 0.10 max 0.50 max 0.08 max 0.02 max 0.02 max 2.50 max 12.50 – 14.50 50.015 min* 2.00 – 6.00 20.00 – 22.50

Hastelloy Alloy C22 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %

Equivalent Grades for C22 Hastelloy Alloy Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Hastelloy C22 2.4602 N06022 NW 6022 – – – NiCr21Mo14W

Hastelloy C22 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy Alloy C22 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-16T11:46:02+05:30October 15th, 2021|

Alloy Steel F22 Socket Weld Fittings Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Alloy Steel F22 Socket Weld Fittings, which remains magnetic in both the annealed and heat treated conditions. Our clients are our most valuable assets and for that we use our skilled people and latest technology and equipment’s for to make these Alloy Steel F22 Forged Socket Weld Elbow Fittings to fulfil their needs. In the annealed condition, our Alloy Steel F22 Forged Socket Weld Tee Fittings is ductile and may possibly be formed. These Alloy Steel F22 Forged Socket Weld Cross Fittings is resistant to atmospheric conditions, water and some chemicals.

We are a proactive organization and also a specialist in our Alloy Steel F22 Forged Socket Weld Cap Fittings and other quality products that meet and exceed customer`s specific requirements and as a result we ensure complete satisfaction. Our management style has been the key to our success in making these Alloy Steel F22 Forged Socket Weld Coupling Fittings, as we delegates responsibility to the specific need of every customers and we have made every customer a member of our family.

Elevated mechanical properties and corrosion resistance are being achieved with our Alloy Steel F22 Forged Socket Weld Union Fittings when it’s hardened and tempered. These Alloy Steel F22 Forged Socket Weld Plug Fittings can be used in applications such as dental and surgical instruments, pipelines, valves and nozzles, automotive parts and more.

Alloy Steel F22 Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/2″ NB TO 48″ NB.
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Alloy Steel F22 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si S P Cr Mo
Alloy Steel F22 0.05-0.15 0.3-0.6 0.5 0.03 0.045 0.8-1.25 0.44-0.65

Alloy Steel Grade F22 Socket weld Fitting Mechanical Properties

Tensile Strength Yield Strength (0.2%Offset) Elongation
205 415 20 %

Alloy Steel F22 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel F22 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-11-25T15:18:59+05:30October 14th, 2021|

Alloy Steel F12 Socket Weld Fittings Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Alloy Steel F12 Socket Weld Fittings, which is available in personalized and also in different designs and sizes to our clients. The crevice corrosion resistance of Alloy Steel F12 Forged Socket Weld Elbow Fittings can be in excess of that of the 6 % Mo grades in some cases. Copper content in Alloy Steel F12 Forged Socket Weld Tee Fittings adds resistance to sulphuric and other reducing acids, particularly in the very aggressive “mid concentration” range. We are a renowned name in this domain engaged in providing Alloy Steel F12 Forged Socket Cap Elbow Fittings.

We have gained immense client`s appreciation for Alloy Steel F12 Forged Socket Weld Cross Fittings, owing to our excellent product quality and transparent dealings. For maximum corrosion resistance to chemical environments, Alloy Steel F12 Forged Socket Weld Coupling Fittings is essential that the stainless steel surface be free of all heat tints or oxide formed during forging, annealing, or heat treating.

All surfaces of Alloy Steel F12 Forged Socket Weld Union Fittings must be ground or polished to remove any traces of oxide and surface decarburization. The parts of Alloy Steel F12 Forged Socket Weld Plug Fittings should then immerse in a warm solution of 10 % – 20 % nitric acid to remove any residual iron, where a thorough water rinse should follow the nitric acid treatment.

Alloy Steel F12 Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/2″ NB TO 48″ NB.
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Alloy Steel F12 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si S P Cr Mo
Alloy Steel F12 0.15 max 0.3-0.6 0.5 0.03 0.03 4-6 0.44-0.65

Alloy Steel Grade F12 Socket weld Fitting Mechanical Properties

Tensile Strength Yield Strength (0.2%Offset) Elongation
275 485 20 %

Alloy Steel F12 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel F12 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-11-25T13:12:19+05:30October 14th, 2021|

Alloy Steel F11 Socket Weld Fittings Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Alloy Steel F11 Socket Weld Fittings, which must be hardened for maximum heat and corrosion resistance. Performance of Alloy Steel F11 Forged Socket Weld Elbow Fittings is best with a smooth surface finish. Alloy Steel F11 Forged Socket Weld Tee Fittings has less corrosion resistance than the austenitic grades and also less than 17 % chromium ferritic alloys. We have great pleasure to introduce ourselves as one of the leading Stockist & Suppliers of Alloy Steel F11 Forged Socket Weld Cap Fittings. For thin sections of Alloy Steel F11 Forged Socket Weld Cross Fittings, air cooling can be substituted for the oil quench.

As a result, Alloy Steel F11 Forged Socket Weld Coupling Fittings still exhibits its high hardness and wears resistance properties but some ductility is introduced at the loss of a few pints of hardness. Characterized by good corrosion resistance in mild atmospheric industrial and domestic environments, Alloy Steel F11 Forged Socket Weld Union Fittings is coupled with good strength and excellent toughness in the hardened and tempered condition.

Due to its excellent hardenability, Alloy Steel F11 Forged Socket Weld Plug Fittings is capable of being through hardened depending upon carbon content and section size. Alloy Steel F11 Forged Socket Weld Lateral Tee Fittings is rated as more resistant than grade 904L and approaching that of the 6 % Molybdenum “super austenitic” grades.

Alloy Steel F11 Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/2″ NB TO 48″ NB.
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Alloy Steel F11 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si S P Cr Mo
Alloy Steel F11 0.05-0.15 0.3-0.6 0.5-1 0.03 0.03 1-1.5 0.044-0.65

Alloy Steel Grade F11 Socket weld Fitting Mechanical Properties

Tensile Strength Yield Strength (0.2%Offset) Elongation
205 415 20 %

Alloy Steel F11 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel F11 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-11-25T12:50:43+05:30October 13th, 2021|

Alloy Steel F9 Socket Weld Fittings Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Alloy Steel F9 Socket Weld Fittings, which is sometimes used in the unhardened or hardened and highly tempered condition because of its low cost and ready machinability. Use of this Alloy Steel F9 Forged Socket Weld Elbow Fittings, if post hardening and tempering is involved. In the hardened and tempered as supplied condition, Alloy Steel F9 Forged Socket Weld Tee Fittings is not recommended due to its effect on the mechanical properties within the heat affected zone.

Alloy Steel F9 Forged Socket Weld Cross Fittings have better corrosion resistance, where it is also lower than most of the ferrite stainless steels, and all of the 300 series austenitic stainless steels. Alloy Steel F9 Forged Socket Weld Cap Fittings has optimum corrosion resistance in the hardened and tempered condition and is not therefore recommended for use in the annealed condition.

Alloy Steel F9 Forged Socket Weld Coupling Fittings is most important that oxygen is always allowed to circulate freely on all stainless steel surfaces to ensure that a chrome oxide film is always present to protect it. We are capable of providing a vast range of materials like Alloy Steel F9 Forged Socket Weld Union Fittings from stock, to suit your needs. Alloy Steel F9 Forged Socket Weld Plug Fittings resists dry atmosphere, fresh water, mild alkalis and acids, food, steam and hot gases.

Alloy Steel F9 Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/2″ NB TO 48″ NB.
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Alloy Steel F9 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si S P Cr Mo
Alloy Steel F9 0.15 0.3-0.6 0.5-1 0.03 0.03 8-10 0.9-1.1

Alloy Steel Grade F9 Socket weld Fitting Mechanical Properties

Tensile Strength Yield Strength (0.2%Offset) Elongation
380 585 20 %

Alloy Steel F9 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel F9 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-11-25T17:01:53+05:30October 13th, 2021|

Alloy Steel F5 Socket Weld Fittings Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality of Alloy Steel F5 Socket Weld Fittings, which is the standard molybdenum – bearing grade and second in importance to 304 amongst the austenitic stainless steels. The low carbon version of Stainless Steel 304L Forged Socket Weld Elbow and is immune from sensitization (grain boundary carbide precipitation). Thus Stainless Steel 304L Forged Socket Weld Tee is extensively used in heavy gauge welded components. Stainless Steel 304L Forged Socket Weld Cap  are usually regarded as the standard “marine grade stainless steel”, but it is not resistant to warm sea water.

Stainless Steel 304L Forged Socket Weld Coupling has good oxidation resistance in intermittent service to 870 Degree C and in continuous service to 925 Degree C. Continuous use of Stainless Steel 304L Forged Socket Weld Cross  in the 425 Degree – 860 Degree C range is not recommended if subsequent aqueous corrosion resistance is important. In many marine environments, Stainless Steel 304L Forged Socket Weld Union  does exhibit surface corrosion, usually visible as brown staining.

Stainless Steel 304L Forged Socket Weld Plug , with its higher carbon content has application at elevated temperatures, which is particularly associated with crevices and rough surface finish. The molybdenum gives Stainless Steel 304L Forged Socket Weld Lateral Tee better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments.

Stainless Steel 304L Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

SS 304L Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 304L 0.35 max 2 max 1.00max 0.045 max 0.030 max 18 – 20 – 8 – 13 –

Stainless Steel 304L Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 304L Stainless Steel Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304L 1.4306\1.4307 S30403 SUS 304L 304S11 03Х18Н11 Z7CN18‐09 X2CrNi18-9 / X2CrNi19-11

Stainless Steel 304L Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 304L Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-11-25T16:18:21+05:30October 12th, 2021|

Alloy Steel F1 Socket Weld Fittings Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Alloy Steel F1 Socket Weld Fittings, which is commonly used for cutlery – particularly blades of table knives and for some carving knives and similar. On completion of welding in our Alloy Steel F1 Forged Socket Weld Elbow Fittings, cool slowly as possible until hand warm and as required. Carry out post – weld sub – critical anneal of these Alloy Steel F1 Forged Socket Weld Tee Fittings at 630 Degree C – 680 Degree C or full anneal and harden and temper as required.

Our Alloy Steel F1 Forged Socket Weld Cap Fittings does not work hardens to the same extent as the 300 series austenitic stainless steels, but is more similar in this respect to the low alloy high tensile steels.  These Alloy Steel F1 Forged Socket Weld Cross Fittings has less corrosion resistant than the austenitic grades and also less than 17 % chromium ferrite alloys, which further also have slightly lower resistance.

The corrosion resistance of our Alloy Steel F1 Forged Socket Weld Coupling Fittings is sufficient to resist food and normal washing methods, but prolonged contact with unwashed food residues can result in pitting. Always ensure that the tempering temperature employed during the initial heat treatment in these Alloy Steel F1 Forged Socket Weld Union Fittings was higher than the nitriding temperature otherwise the core strength will be affected.

Alloy Steel F1 Forged Socket weld Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/2″ NB TO 48″ NB.
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Alloy Steel F1 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si S P Cr Mo
Alloy Steel F1 0.15 max 0.3-0.6 0.5 0.03 0.03 4-6 0.44-0.65

Alloy Steel Grade F1 Socket weld Fitting Mechanical Properties

Tensile Strength Yield Strength (0.2%Offset) Elongation
275 485 20 %

Alloy Steel F1 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel F1 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-11-25T12:31:45+05:30October 12th, 2021|

Incoloy 925 Socket Weld Fittings Manufacturers In India

Incoloy 925 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Incoloy 925 Socket Weld Fittings, where the molybdenum aids resistance to pitting and crevice corrosion. Molybdenum in Incoloy 925 Forged Socket Weld Elbow additionally aids resistance to pitting and crevice corrosion whilst Chromium offers resistance to oxidizing environments. Many different industries rely on Incoloy 925 Forged Socket Weld Tee for a number of uses including: valves, packers, hangers, and tubulars for sour gas production. Incoloy 925 Forged Socket Weld Cap can be machined using conventional machining methods which are used for iron based alloys.

The nickel content in Incoloy 925 Forged Socket Weld Coupling is sufficient for protection against chloride – ion stress – corrosion cracking. Incoloy 925 Forged Socket Weld Cross is used for surface and down-hole hardware in sour gas wells and for oil – production equipment. Incoloy 925 Forged Socket Weld Lateral Tee may be forged in the range 2150 Degree F / 1600 Degree F (1175 Degree C / 870 Degree C).

Incoloy 925 Socket Weld Fittings

Incoloy 925 Forged Socket Weld Union has outstanding resistance to pitting, general corrosion, crevice corrosion, and stress – corrosion cracking in many aqueous environments including those containing chlorides and sulfides. Incoloy 925 Forged Socket Weld Plug is also used in High Strength Piping Systems, Fasteners, Shafting and more. Inconel 925 Forged SW Cap can as well be used for fasteners, and for pump shafts in marine environments.

Incoloy 925 Socket Weld Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Incoloy 925 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si Al S Cr Cu Ni Fe
Incoloy 925 0.03 max 1.0 max 0.5 max 0.01-0.05 0.03 max 19.55-22.50 1.50-3.00 42.0-46.0 22 min

Alloy 925 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.14 g/cm3 1343 °C   MPa – 650  MPa – 300 30 %

Equivalent Grades for 925 Incoloy Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Incoloy 925 – N09925 NCF 925 – – – –

Incoloy 925 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 925 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-09T11:08:27+05:30October 11th, 2021|

Incoloy 330 Socket Weld Fittings Manufacturers In India

Incoloy 330 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Incoloy 330 Socket Weld Fittings to the clients, which are packaged to ensure that there is no damage during transit. Annealing of Incoloy 330 Forged Socket Weld Elbow is carried out at around 2050 Degree F (1120 Degree C) followed by water quenching. SS 330 Forged Socket Weld Tee are used in Hardware, Petro – Chemical Industry, Nuclear Industry, Oil and Gas Industry, Pulp and Paper Industry, Research and Development, Mega Projects, Defense and Development Industries. Ra 330 Forged Socket Weld Cap is also used in industrial heating for furnace muffles, conveyor systems, retorts, and for heat – treating baskets and fixtures.

Incoloy 330 Forged Socket Weld Coupling as hardened nickel – based alloys and cold – worked solid nickel – based alloys offer many advantages such as high strength, toughness, low magnetic permeability and excellent corrosion resistance. We have applied our knowledge and close working relationship with the thermal process industry to modify SS 330 Forged Socket Weld Cross to optimize its performance.

Incoloy 330 Socket Weld Fittings

Ra 330 Forged Socket Weld Union is an austenitic alloy with good high – temperature strength and corrosion resistance, which can also function efficiently even at elevated temperatures. Carburization and oxidation resistance of Incoloy 330 Forged Socket Weld Plug to about 2100 Degree F are enhanced by the silicon content of the alloy.

Incoloy 330 Socket Weld Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Incoloy 330/SS330/Ra330 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si P S Cr Cu N Fe
330 0.08 max  2 max  0.75-1.50 0.030  –  17.0-20.0 – 34.0-37.0 –

Equivalent Grades for 330/SS330/Ra330 Incoloy Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Incoloy 330 1.4886 N08330  – – –  –  –

Incoloy 330/SS330/Ra330 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 330/SS330/Ra330 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-11T12:14:45+05:30October 11th, 2021|

Incoloy 825 Socket Weld Fittings Manufacturers In India

Incoloy 825 Socket Weld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Incoloy 825 Socket Weld Fittings, which has good ductility and may be readily formed by all conventional methods. The chromium content of Incoloy 825 Forged Socket Weld Elbow Fittings confers resistance to a variety of oxidizing substances such as nitric acid, nitrates and oxidizing salt. Incoloy 825 Forged Socket Weld Tee Fittings can be readily welded by the shielded metal – arc process using alloy welding electrode, the gas shielded arc processes using alloy filler metal, and the resistance welding processes.

The levels of molybdenum and copper enable Incoloy 825 Forged Socket Weld Cap Fittings to resist reducing agents and acids. Because of its superior corrosion resistance characteristics, Incoloy 825 Forged Socket Weld Coupling Fittings is in use in a number of industries and applications including: Chemical processing, Calorifiers, Pollution control, Oil and gas recovery, etc. Incoloy 825 Forged Socket Weld Cross Fittings has good mechanical properties from moderately to high temperatures, and has satisfactory resistance to localized attack like pitting and crevice corrosion.

Incoloy 825 Socket Weld Fittings

Incoloy 825 Forged Socket Weld Lateral Tee Fittings is also used in offshore oil and gas production, petroleum refining, ore processing, steel pickling, waste disposal industries and so on. The chemical composition of Incoloy 825 Forged Socket Weld Union Fittings is designed to provide exceptional resistance to several corrosive environments. Incoloy 825 Forged Socket Weld Plug Fittings is similar to Inconel 800 but with improved resistance to aqueous corrosion.

Incoloy 825 Socket weld Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings

Incoloy 825 Forged Socket weld Fittings Chemical Composition

Grade C Mn Si Al S Cr Cu Ni Fe
Incoloy 825 0.05 max 1.0 max 0.5 max 0.02 0.03 max 19.50-23.50 1.50-3.00 30.0-35.0 22 min

Alloy 825 Socket weld Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

Equivalent Grades for 825 Incoloy Forged Socket weld Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo

Incoloy 825 Forged Socket weld Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 825 Forged Socket weld Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-09T17:09:58+05:30October 9th, 2021|

SACHIYA STEEL INTERNATIONAL

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top