LOGO 1200 X 300

Nipple

Nickel Alloy 200 Nipple Manufacturers In India

Sachiya Steel International is one of the pioneer Manufacture and Exporter of quality Nickel Alloy 200 Nipple, which is designed specifically to withstand sulphuric acid. Our Nickel 200 Hexagon Reducing Nipple is an iron – base and austenitic alloy with excellent corrosion resistance to a number of different media.

This Nickel 200 Hexagon Nipple has proven to be useful in a number of applications such as flue – gas desulfurization, chemical processing, food processing and storage as well as pharmaceutical applications to name a few. The nickel, chromium, molybdenum and copper levels of our Nickel 200 One End Threaded Nipple provide excellent general corrosion resistance.

Restricted carbon plus columbium stabilization permits welded fabrications in these Nickel 200 Both End Threaded Nipple, which is to be used in corrosive environments, normally without post – weld heat treatment. Our Nickel 200 Concentric Swaged Nipple is a super – austenitic stainless alloy developed for maximum corrosion resistance to sulphuric acid and other aggressive environments not suitable for typical austenitic grades. This Nickel 200 Eccentric Swaged Nipple also proves adequate resistance to nitric acid, concentrated sulphuric acid, dilute acetic acid and naphtha.

Nickel Alloy 200 Nipple

Our Alloy 200 Hexagon Reducing Nipple is also stabilized with Columbium to minimize carbide precipitation during welding. Applications of these Alloy 200 One End Threaded Nipple could result in real cost savings when carefully compared to higher-cost alloys to determine if the necessary resistance is obtained in the chosen media.

Nickel 200 Nipple Specification 
Specifications : ASTM B366, ASME SB 366
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : ½” NB to 24″NB

Nickel Alloy 200 Nipple Chemical Composition

Nickel 200 Ni C Mo Mn Si Fe P S Cu Cr
99.0 min 0.15 max – 0.35 max 0.1 max 0.4 max – 0.01 max 0.25 max –

Nickel 200 Nipple Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 21500 , MPa – 148 Psi – 67000 , MPa – 462 45 %

Equivalent Grades for Nickel 200 Nipple

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Nickel 200 N02200 2.4066 N-100M Ni 99.2 NW 2200 NA 11 НП-2

Nickel 200 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel Alloy 200 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-13T18:58:29+05:30June 12th, 2021|

Monel Alloy K500 Nipple Manufacturers In India

Monel Alloy K500 Nipple Manufacturers In India

Sachiya Steel International is one of the prominent Manufacture and Exporter of Monel Alloy K500 Nipple, which is similar to alloy 400 but has improved resistance to aqueous corrosion. The molybdenum in these Monel K500 Hexagon Reducing Nipple aids resistance to pitting and crevice corrosion.

Monel K500 Hexagon Nipple is titanium stabilized to resist pitting and inter – granular attack after fabrication, particularly welding, which includes heating in the critical sensitization temperature range (650 Degree C – 760 Degree C). This Monel K500 One End Threaded Nipple, like many alloys, will remain stable during extended exposure to high temperatures.

Monel K500 Both End Threaded Nipple will also stave off erosion in a number of aqueous atmospheres. The usage of this Monel K500 Concentric Swaged Nipple is chemical processing components, pollution control, oil and gas recovery, pickling tank parts and nuclear fuel processing. Monel K500 Eccentric Swaged Nipple was developed to provide exceptional resistance to numerous corrosive environments, both oxidizing and reducing.

Monel Alloy K500 Nipple

This Alloy K500 Hexagon Reducing Nipple has good mechanical properties at cryogenic temperatures to moderately high temperatures up to 538 Degree C. Alloy K500 Hexagon Nipple has excellent resistance to both reducing and oxidizing acids, to stress – corrosion cracking, and to localize attack such as pitting and crevice corrosion. The fabrication of these Alloy K500 One End Threaded Nipple is typical of nickel – base alloys, with material readily formable and weldable by a variety of techniques.

Monel Alloy K500 Nipple Specification 
Specifications : ASTM B366, ASME SB366
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : ½” NB to 24″NB

Alloy K500 Nipple Chemical Composition

Grade C Mn Si S Cu Fe Ni
Monel K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min

Monel K500 Nipple Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel K500 8.44 g/cm3 1350 °C (2460 °F) Psi – 160000 , MPa – 1100 Psi – 115000 , MPa – 790 20 %

Equivalent Grades for Monel K500 Nipple

STANDARD WERKSTOFF NR. UNS
Monel K500 2.4375 N05500

Monel K500 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy K500 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-16T16:04:48+05:30June 12th, 2021|

Monel Alloy 400 Nipple Manufacturers In India

Monel Alloy 400 Nipple Manufacturers In India

Sachiya Steel International is one of the pioneer supplier and manufacturer of quality Monel Alloy 400 Nipple, where we provide these products at very competitive price to our clients. Offered Monel 400 Hexagon Reducing Nipple is manufactured using optimum quality stainless steel and latest technology by vendors’ skilled professionals. Besides, Monel 400 Hexagon Nipple is made available in various sizes and shapes. Monel 400 One End Threaded Nipple is highly appreciated among our clients for their precise design and durability.

The corrosion resistance of Monel 400 Both End Threaded Nipple is substantially equivalent to that of Alloy K500 Nipple. As would be expected from its high copper content, Monel 400 Concentric Swaged Nipple is rapidly attacked by nitric acid and ammonia systems. Monel 400 Eccentric Swaged Nipple is a precipitation – harden able nickel – copper alloy that combines the excellent corrosion resistance characteristic with the added advantage of hardness and greater strength.

Monel Alloy 400 Nipple

These amplified properties of strength and hardness in Alloy 400 Hexagon Reducing Nipple is obtained by adding titanium and aluminum to the nickel – copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age – hardened condition, Alloy 400 Hexagon Nipple has a greater tendency toward stress – corrosion cracking in some environments than Monel K500 Nipple. Our Alloy 400 One End Threaded Nipple can be further strengthened by cold working prior to precipitation hardening.

Monel 400 Nipple Specification
Specifications : ASTM B366, ASME SB 366
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : ½” NB to 24″NB

Alloy 400 Nipple Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Monel 400 0.30 max 2.00 max 0.50 max 0.24max 28.0-34.0 2.50 max 63.00 min –

Monel 400 Nipple Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %

Equivalent Grades for Monel 400 Nipple

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Monel 400 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe

Monel 400 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 400 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-18T12:58:35+05:30June 11th, 2021|

Hastelloy Alloy X Nipple Manufacturer In India

Hastelloy Alloy X Nipple Manufacturer In India

Sachiya Steel International is one of the well-known Manufacture and Exporter of Hastelloy Alloy X Nipple, which is recommended for joining alloy by Gas Tungsten Arc or Gas Metal Arc welding. Coated electrodes of our Hastelloy X Hexagon Reducing Nipple are also available for Shielded Metal Arc welding in non – ASME code construction. For dissimilar metal joining of this Hastelloy X Hexagon Nipple to nickel, cobalt, or iron – base materials, welding products may all be considered, depending upon the particular case.

Pre – heat in our Hastelloy X One End Threaded Nipple is not required, where pre – heat is generally specified as room temperature. Inter – pass temperature in these Hastelloy X Both End Threaded Nipple should be maintained below 200 Degree F (93 Degree C). Auxiliary cooling methods in our Hastelloy X Concentric Swaged Nipple may be used between weld passes, as needed, providing that such methods do not introduce contaminants.

Hastelloy Alloy X Nipple

Post – weld heat treatment is not generally required for this Hastelloy X Eccentric Swaged Nipple, where bright annealed products are cooled in hydrogen. All greases, oils, cutting oils, crayon marks, machining solutions, corrosion products, paint, scale, dye penetrant solutions, and other foreign matter should be completely removed from our Alloy X Hexagon Reducing Nipple. All cold – reduced sheet and the various weld samples were produced from these Alloy X Hexagon Nipple which had been solution heat – treated prior to cold reduction or welding.

Hastelloy X Nipple Specification
Specifications : ASTM B366, ASTM SB 366, ASTM B564, ASME SB564
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : ½” NB to 24″NB
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

Alloy X Nipple Chemical Composition

Hastelloy X Ni C Mo Mn Si Fe Cu Ti Co Cr
Balance 0.05-0.15 8.0-10.0 1.0 max 1.0 max 17.0-20.0 0.50 max 0.15 max 0.5-2.5 20.5-23.0

Hastelloy X Nipple Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
– – – – –

Equivalent Grades for Hastelloy X Nipple

STANDARD UNS WERKSTOFF NR.
Hastelloy X N06002 2.4665

Hastelloy X Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy X Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-18T16:52:45+05:30June 11th, 2021|

Alloy B3 Nipple Manufacture

Sachiya Steel International is one of the well-known Manufacture and Exporter of Alloy B3 Nipple, which is the most (micro – structurally) stable of the widely used nickel – chromium – molybdenum materials. Hastelloy B3 Hexagon Reducing Nipple is well known for their resistance to many aggressive chemicals, in particular hydrochloric acid, sulphuric acid, and chlorides. This stability means that Hastelloy B3 Hexagon Nipple can be welded without fear of sensitization, i.e. the nucleation and growth of deleterious, second phase precipitates in the grain boundaries of the weld heat – affected zone (HAZ).

Like other nickel alloys, Alloy B3 One End Threaded Nipple is ductile, easy to form and weld, and possesses exceptional resistance to stress corrosion cracking in chloride – bearing solutions (a form of degradation to which the austenitic stainless steels are prone). With its high chromium and molybdenum contents, Hastelloy B3 Both End Threaded Nipple is able to withstand oxidizing and non – oxidizing acids, and is resistant to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy B3 Concentric Swaged Nipple indicates that B3 alloy must be held at the most critical temperature (825 Degree C) for 2 hours before grain boundary precipitation is sufficient to cause preferential grain boundary attack of a significant nature. This means that, during welding, heat input is important in the case of C-276 alloy, but of little consequence in the case of Hastelloy B3 Eccentric Swaged Nipple.

Hastelloy B3 Nipple
Specifications : ASTM B366, ASTM SB 366, ASTM B564, ASME SB564
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : ½” NB to 24″NB
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

Alloy B3 Nipple Chemical Composition

Grade Ni Mo Cr Fe W Mn C Al Ti Si
Hastelloy B3 65.0 min 28.5 1.5 1.5 3.0 max 3.0 max 0.01 max 0.50 max 0.2 max 10 max

Hastelloy B3 Nipple Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
9.2 g/cm3 1370 °C (2550 °F) Psi – 1,15,000 , MPa –760 Psi – 52,000 , MPa – 350 40%

Equivalent Grades for Hastelloy B3 Nipple

STANDARD WERKSTOFF NR. UNS
Hastelloy B3 2.4600 N10675

Hastelloy B3 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy B3 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-11-06T19:35:49+05:30June 10th, 2021|

Hastelloy Alloy B2 Nipple Manufacturer In india

Hastelloy Alloy B2 Nipple Manufacturer In India

Sachiya Steel International is one of the pioneer Manufacture and Exporter of Hastelloy Alloy B2 Nipple, which are also known as high performance alloys. Alloy B2 Hexagon Reducing Nipple contains many elements in a variety of combinations designed to provide unique material properties for specific applications. Hastelloy B2 Hexagon Nipple can function at very high temperatures and in severe mechanical stress environments, and also where high surface stability is required.

Hastelloy B2 One End Threaded Nipple have high creep and oxidation resistance, and are a wrought nickel – molybdenum alloy that can be used in the ‘as welded’ condition. Strengthening of super alloys such as of Hastelloy B2 Both End Threaded Nipple is performed by solid – solution hardening, work hardening, and precipitation hardening methods. Hastelloy B2 Concentric Swaged Nipple has excellent resistance to all temperatures and concentrations of hydrochloric acid.

Additionally, Hastelloy B2 Eccentric Swaged Nipple has good stress corrosion cracking and pitting resistance as well. However, due to the presence of high molybdenum content, Alloy B2 Hexagon Nipple is expensive. Alloy B2 Hexagon Reducing Nipple is an alloy with controlled thermal expansion and an average coefficient of expansion in the temperature range 20 Degree C – 100 Degree C. Alloy B2 One End Threaded Nipple can be easily formed using all the conventional methods, and also can be welded using the traditional welding methods. Special precautions for Alloy B2 Both End Threaded Nipple should be taken to avoid excessive heat input.

Hastelloy Alloy B2 Nipple Specification
Specifications : ASTM B366, ASTM SB 366, ASTM B564, ASME SB564
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : ½” NB to 24″NB
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

Alloy B2 Nipple Chemical Composition

Hastelloy B2 Ni C Mo Mn Si Fe P S Co Cr
Balance 0.02 max 26.0-30.0 1.0 max 0.10 max 2.0 max 0.040 max 0.030 max 1.0 max 1.0 max

Hastelloy B2 Nipple Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
9.2 g/cm3 1370 °C (2500 °F) Psi – 51,000, MPa – 350 Psi -1,10,000, MPa -760 40 %

Equivalent Grades for Hastelloy B2 Nipple

STANDARD UNS WERKSTOFF NR.
Hastelloy B2 N10665 2.4617

Hastelloy B2 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy B2 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-18T18:55:37+05:30June 10th, 2021|

Top-Quality Hastelloy Alloy B2 Nipple Manufacturer in Oman

Top-Quality Hastelloy Alloy B2 Nipple Manufacturer in Oman – Sachiya Steel International Private Limited

Finding high-quality industrial materials in Oman, where precision and reliability are of utmost importance, can be a difficult challenge. Hastelloy Alloy B2, an exceptional corrosion-resistant material used across industries due to its exceptional properties has proven its worth with many companies taking notice. Sachiya Steel International Private Limited stands out as a top Hastelloy Alloy B2 Nipple manufacturer.

Why Should You Select Sachiya Steel International Private Limited for Hastelloy Alloy B2 Nipples in Oman?

Sachiya Steel International Private Limited is an industry leader when it comes to industrial materials like Hastelloy Alloy B2 Nipples; here is why Sachiya Steel International Private Limited should be your go-to choice:

High-Quality Products: Sachiya Steel International prides themselves on producing top-quality Hastelloy Alloy B2 Nipples that stand the test of time, both in terms of durability and corrosion resistance. Their products have earned accolades from various industries such as chemical processing, oil and gas extraction.

Customization: Sachiya Steel International understands that each project is distinct. Therefore, they offer customized Hastelloy Alloy B2 Nipples that meet your specific requirements for customization purposes.

State-of-the-Art Manufacturing: Sachiya Steel International offers state-of-the-art manufacturing facilities to produce Hastelloy Alloy B2 Nipples of unrivaled precision and quality.

Compliance and Certification: Our company adheres to international quality standards and holds certifications such as ISO 9001:2015, ISO 14001:2015 and OHSAS 18001:2007 to guarantee products that comply with global requirements. This commitment to excellence ensures you get products of superior quality!

Competitive Pricing: Sachiya Steel International Private Limited provides competitive prices without compromising on quality, making their affordable services especially useful to businesses in Oman looking to reduce expenses and expenses.

Hastelloy Alloy B2 Nipple

Hastelloy Alloy B2 Nipple Specifications
Specifications : ASTM B366, ASTM SB 366, ASTM B564, ASME SB564
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : ½” NB to 24″NB
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

Alloy B2 Nipple Chemical Composition

Hastelloy B2 Ni C Mo Mn Si Fe P S Co Cr
Balance 0.02 max 26.0-30.0 1.0 max 0.10 max 2.0 max 0.040 max 0.030 max 1.0 max 1.0 max

Hastelloy B2 Nipple Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
9.2 g/cm3 1370 °C (2500 °F) Psi – 51,000, MPa – 350 Psi -1,10,000, MPa -760 40 %

Equivalent Grades for Hastelloy B2 Nipple

STANDARD UNS WERKSTOFF NR.
Hastelloy B2 N10665 2.4617

Hastelloy Alloy B2 Nipples: An Overview Hastelloy Alloy B2 is a nickel-molybdenum alloy widely acclaimed for its exceptional resistance to various forms of corrosion in reducing environments, particularly sulfuric, acetic, hydrochloric, and phosphoric acids. Hastelloy B2 Nipples provide outstanding corrosion resistance when connecting pipes – making them the ideal choice in industries where safety and reliability are of utmost importance.

Hastelloy B2 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Sachiya Steel International Private Limited Commitment to Sustainability

Environmental responsibility has never been more crucial, which is why Sachiya Steel International Private Limited prioritizes it when designing its manufacturing processes. These processes aim to minimize waste and environmental impact; when you purchase from Sachiya Steel you not only get quality products but also support an organization which cares for our planet.

By |2024-02-19T11:38:18+05:30June 8th, 2021|

Hastelloy Alloy C276 Nipple Manufacturer In India

Hastelloy Alloy C276 Nipple Manufacturer In India

Sachiya Steel International is one of the pioneer trader and exporter of Hastelloy Alloy C276 Nipple, which is a non – magnetic and austenitic alloy with high nickel content. Hastelloy C276 Hexagon Reducing Nipple is rather uniquely resistant to wet chloride gas and chlorine solutions, where its properties enable excellent resistance to oxidizing salts. Hastelloy C276 Hexagon Nipple exhibits excellent intermediate temperature tensile ductility, and is not normally subject to strain age cracking problems common for other gamma prime strengthened alloys.

Alloy C276 One End Threaded Nipple also resists formation of grain boundary precipitates in the weld heat affected zone making it useful for most chemical processes in the as – welded condition. Hastelloy C276 Both End Threaded Nipple has excellent resistance to pitting and stress corrosion cracking, where its larger sizes are available in welded construction and can also be fabricated to order.

Hastelloy Alloy C276 Nipple

Hastelloy C276 Concentric Swaged Nipple with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Its valuable combination of high strength, good corrosion resistance and toughness in both base metals and welds of Hastelloy C276 Eccentric Swaged Nipple gives designers opportunities to add reliability to their products while simplifying fabrication and often reducing costs. Alloy C276 Hexagon Reducing Nipple has good resistance to stress corrosion cracking in the lower strength conditions, where high strength is maintained to approximately 600 Degree F (316 Degree C).

Hastelloy Alloy C276 Nipple Specification
Specifications : ASTM B366, ASTM SB 366, ASTM B564, ASME SB564
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : ½” NB to 24″NB
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

Alloy C276 Nipple Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
C276 0.010 max 1.00 max 0.08 max 0.03 max 2.50 max 50.99 min* 14.50 – 16.50 4.00 – 7.00 15.00 – 17.00 0.04 max

Hastelloy C276 Nipple Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C276 8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40 %

Equivalent Grades for Hastelloy C276 Nipple

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C276 2.4819 N10276 NW 0276 ХН65МВУ NiMo16Cr15W ЭП760

Hastelloy C276 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy C276 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-15T18:10:54+05:30June 8th, 2021|

Hastelloy Alloy C22 Nipple Manufacturers In India

Hastelloy Alloy C22 Nipple Manufacturers In India

Sachiya Steel International is one of the prominent Manufacture & Exporter for Hastelloy Alloy C22 Nipple, which has face – centered cubic lattice and cubic structure. These Hastelloy C22 Hexagon Reducing Nipple possess prominent resistance performance to different chemical environments, including strong oxidizing matter, such as iron chloride, copper chloride, chlorine, heat pollution liquid(organic and inorganic), formic acid, acetic acid, acetyl oxide, sea water and salting liquid and so on.

Our Hastelloy C22 Hexagon Nipple suits for many kinds of chemical process industry which contain the oxidizing medium and reluctant. High molybdenum and chromium content make this Hastelloy C22 One End Threaded Nipple resist the chloride corrosion, and tungsten make this corrosion resistance better. The controlled chemistry of our Hastelloy C22 Both End Threaded Nipple with minimum iron and chromium content reduces the risk of embrittlement occurring during fabrication, as this retards precipitation of phase in the temperature range 700 Degree C – 800 Degree C.

Hastelloy Alloy C22 Nipple

These Hastelloy C22 Concentric Swaged Nipple is one of a few material that can resist the corrosion of moist chlorine, hypochlorite and chlorine dioxide. Our Hastelloy C22 Eccentric Swaged Nipple has prominent corrosion resistance to high concentration chlorate (iron chloride and copper chloride). This Alloy C22 Hexagon Reducing Nipple is widely used in the chemical field and petrifaction field, such as the element of chloride organic and catalyzes system. Our Alloy C22 Hexagon Nipple has good resistance to chloride – induced stress-corrosion cracking (SCC).

Hastelloy C22 Nipple Specification
Specifications : ASTM B366, ASTM SB 366, ASTM B564, ASME SB564
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : ½” NB to 24″NB
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

Alloy C22 Nipple Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
C22 0.010 max 0.50 max 0.08 max 0.02 max 2.50 max 50.015 min* 20.00 – 22.50 2.00 – 6.00 12.50 – 14.50 0.02 max

Hastelloy C22 Nipple Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C22 8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %

Equivalent Grades for Hastelloy C22 Nipple

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C22 2.4602 N06022 NW 6022 – NiCr21Mo14W –

Hastelloy C22 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy C22 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-05-18T17:24:54+05:30June 7th, 2021|

Manufacture of Alloy Steel F91 Nipples

Manufacture of Alloy Steel F91 Nipples In India 

Sachiya Steel International is a known Manufacture, Stockist and Exporter unit of Alloy Steel F91 Nipple, which are steels by means of having superior machining properties. By means of increasing amounts of corrosion relative to abrasion, the wear resistance of our Alloy Steel F91 Hexagon Reducing Nipple is seen to improve dramatically with respect to mild steel or other grades of proprietary abrasion – resistant materials.

This Alloy Steel F91 Hexagon Nipple is dual stabilized with niobium and titanium to provide good weld ductility and resistance to inter – granular corrosion in the weld heat affected zone, which can be formed using a wide range of roll forming, mild stretch – bending or common drawing operations. Furthermore, our sales personnel are trained extensively to understand the product qualities of our Alloy Steel F91 One End Threaded Nipple and applications associated by means of specialty steels and this knowledge is used to service the requirements of our customers.

This Alloy Steel F91 Both End Threaded Nipple also offers higher creep, stress – to – rupture, and tensile strength at elevated temperatures. In addition to excellent corrosion resistance and strength properties, our Alloy Steel F91 Concentric Swaged Nipple as well provides excellent fabricability and formability which are typical of the austenitic stainless steels. We at Sachiya Steel International support our customers and represent our suppliers with high caliber technical personnel and laboratory facilities for to manufacture this Alloy Steel F91 Eccentric Swaged Nipple.

Alloy Steel F91 Nipple

Alloy Steel F91 Nipple Specification
Specifications : ASTM A182, ASME SA 182
Dimensions : ANSI/ASME B16.11
Size : 1/4″ to 4″
Class : 2000, 3000, 6000, 9000

Alloy Steel F91 Nipple Chemical Composition

Grade C Mn Si P S Cr Mo
Alloy Steel F91 0.15 max 0.3-0.6 0.5-1.0 0.03 0.03 8-10 0.9-1.1

Alloy Steel F91 Nipple Mechanical Properties

Tensile Strength Yield Strength (0.2%Offset) Elongation
380 585 20 %

Alloy Steel F91 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy Steel F91 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-23T12:33:39+05:30June 7th, 2021|
LOGO 1200 X 300

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top