LOGO 1200 X 300

Nipple

Brass Nipple Manufacture

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the leading manufacturer & Exporter of high quality of Brass Nipple, which is a nickel – iron – chromium alloy which has the addition of copper and molybdenum. Brass Hexagon Reducing Nipple, which has good mechanical properties both at ambient and elevated temperatures of up to 930 Degree F (500 Degree C), is readily fabricated using the common industrial techniques.

Brass Hexagon Nipple is often specified when high strength is needed in moderate – to – large sections. Brass One End Threaded Nipple exhibits exceptional corrosion resistance in chemical environments containing phosphoric acid, nitric acid, chlorides and sulphuric acid. The general effects of these three conditions are qualitatively similar, so low – temperature impact tests (to -50 Degree F) in Brass Both End Threaded Nipple are useful for many applications as toughness indicators under various service conditions and temperatures.

For applications requiring maximum ductility, Brass Concentric Swaged Nipple with low Sulphur levels can be supplied by producers using ladle – refining techniques. When liquid quenching is impractical (because of the danger of cracking or distortion, or because of cost), various low – carbon nickel or nickel – molybdenum Brass Eccentric Swaged Nipple in the normalized – and – tempered condition can be used for low – temperature service. Brass Hex Nipple is the most widely used alloy of the alpha – plus – beta class, and is also the most common of all other alloys.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Brass Nipple
Specifications : ASTM B62, ASME SB 62
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : ½” NB to 24″NB
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Brass Nipple Chemical Composition

Brass Cu Fe Pb Zn
Min./Max. 60.0-63.0 0.35 2.5-3.0 Rem.
Nominal 61.5 – 2.7 35.4

Brass Nipple Physical Properties

Properties US Customary
Melting Point -Liquidus 1650 F
Melting Point -Solidus 1630 F
Density 0.307 lb/in3at 68 F
Electrical Resistivity 39.90 ohms – cmil/ft @ 68 F
Electrical Conductivity 26 %IACS @ 68 F
Thermal Conductivity 67 Btu · ft/(hr · ft2·oF)at 68F
Modulas of Elasticity in Tension 14000 ksi
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Brass Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Brass Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Brass Nipple
brass nipple 500x500 1

Sachiya Steel International is one of the leading manufacturer & Exporter of high quality of Brass Nipple, which is a nickel – iron – chromium alloy which has the addition of copper and molybdenum.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-06-22T12:32:34+05:30June 22nd, 2021|

Copper Steel Nipple Manufacture

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is a known manufacturer and exporter of Copper Steel Nipple, which is stringently tested by our professionals on several defined norms in order to make sure to offer excellent and high quality. Banking on the skills of our qualified team of professionals, we are involved in trading and Stockist of our Copper Hexagon Reducing Nipple.

Our valuable clients can avail this Copper Hexagon Nipple from us in varied quantities at affordable prices, where we have firmly positioned ourselves as leading manufacturer and supplier of these products. Our Copper One End Threaded Nipple is ideal for Drinking Water, Central Heating, Sanitation, Hot and Cold Water, Industrial & Medical Gas Transportation and Various Engineering. We emerged as one of the fastest growing company to manufacture Copper Both End Threaded Nipple, where our growth and development tremendously paved way for us to establish our company.

Copper Steel Nipple | Copper Steel Nipple | Copper Steel Nipple | Copper Steel Nipple | Copper Steel Nipple | Copper Steel Nipple | Copper Steel Nipple | Copper Steel Nipple | Copper Steel Nipple | Copper Steel Nipple

Our organization is highly known among the customers for distributing, supplying and trading a qualitative array of our Copper Concentric Swaged Nipple, which is often used in HVAC for Hospitals, schools, university and industrial plants etc. Reckoned for accurate composition, this Copper Eccentric Swaged Nipple is extensively used in air conditioning and refrigeration systems. We are engaged in providing a vast quality range of our Copper Hex Nipple to our clients, which are generally used for Water & Sewage Treatment, Water, Gas, Steam & Air Lines, Conveyor Industry, Oil & Gas Industry and Agriculture.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Copper Nipple
Specifications : ASTM B62, ASME SB 62
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : ½” NB to 24″NB
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Copper Nipple Chemical Composition

Standard Copper NO. Chemical Composition Mechanical Properties
CU% P% Temper Tensile strength (Mpa) Elongation (%) Average Grain Size (mm)
ASTM
B280/68		 C12200 >99.9 0.015 to 0.040 >60 >205 >40 >0.040
>50 >245
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Copper Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Copper Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Copper Steel Nipple
copper nipple 500x500 1

Sachiya Steel International is a known manufacturer and exporter of Copper Steel Nipple, which is stringently tested by our professionals on several defined norms in order to make sure to offer excellent and high quality.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-06-22T12:07:33+05:30June 22nd, 2021|

Cupro Nickel 70 Nipple Manufacture

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is a known Manufacture And Exporter of Cupro Nickel 70 Nipple, which is known for its moderate strength, workability, formability and weldability. Our Cu-Ni 70 / 30 Hexagon Reducing Nipple are often used in Pump Impellers, Heat Exchanger Tubes, Evaporator Tubes, Distiller Tubes, Condenser Plates, Refrigerators, Process Equipment, and Condenser Components.

The services of these Cupro Nickel 70 / 30 Hexagon Nipple, which include the provision of technical advice and information, are available to those interested in the utilization of copper in all its aspects. Our Copper Nickel 70 / 30 One End Threaded Nipple can be utilized up to 700 Degree F for ASME code heat exchangers and unfired pressure vessels. Our Cu-Ni 70 / 30 Both End Threaded Nipple falls into the moderate to poor machining ability category due to its durability.

Cupro Nickel 70 Nipple | Cupro Nickel 70 Nipple | Cupro Nickel 70 Nipple | Cupro Nickel 70 Nipple | Cupro Nickel 70 Nipple | Cupro Nickel 70 Nipple | Cupro Nickel 70 Nipple | Cupro Nickel 70 Nipple | Cupro Nickel 70 Nipple 

The corrosion resistance and strength of Cupro Nickel 70 / 30 Concentric Swaged Nipple are improved by the addition of manganese, iron, niobium, and or chromium. These Copper Nickel 70 / 30 Eccentric Swaged Nipple is also used in desalination industry, marine engineering, extensively used in the chemical, petrochemical and electrical industries. Cu-Ni 70 / 30 Concentric Nipple was developed specifically for seawater service over decades ago, initially for condensers and piping systems. Good thermal conductivities and ductility down to cryogenic temperatures are also important features of these Cu-Ni 70 / 30 Hex Nipple in their range of applications.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cu-Ni 70/30 Nipple
Specifications : ASTM B466, ASME SB466
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : 2 1/16” to 30”
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Cu-Ni 70/30 Nipple Chemical Composition

Cu-Ni 70/30 Cu Pb Mn Fe Zn Ni
88.6 min 0.05 max 1.0 max 1.8 max 1 max 9-11 max

Cu-Ni 70/30 Nipple Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.1 g/cm3 1443 °C (2430 °F) Psi – 35,000, MPa – 241 Psi -80,000, MPa -551 30 %

Equivalent Grades for Cu-Ni 70/30 Nipple

STANDARD UNS WERKSTOFF NR.
Cupro Nickel 70/30 C71500 2.0882
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Cu-Ni 70/30 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Cu-Ni 70/30 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cupro Nickel 70 Nipple
cupro nickel forged nipple 2

Sachiya Steel International is a known Manufacture And Exporter of Cupro Nickel 70 Nipple, which is known for its moderate strength, workability, formability and weldability.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-06-21T11:27:40+05:30June 21st, 2021|

Cupro Nickel 90 Nipple Manufacture

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is a known manufacturer and exporter of Cupro Nickel 90 Nipple, which have only one phase since the copper nickel binary system shows complete solid solubility. These Cu-Ni 90 / 10 Hexagon Reducing Nipple contains 10 percent of nickel with addition of iron and manganese, which are necessary to maintain resistance towards corrosion.

Our Cupro Nickel 90 / 10 Hexagon Nipple consists of copper and nickel as the basic elements and with or without other elements such as zinc may be present by less than 1 %. These Copper Nickel 90 / 10 One End Threaded Nipple is used for Heat Exchangers & Condensers which are very important for all Industrial fields. These Copper Nickel 70 / 30 Nipple is stronger than the more common Cu-Ni 90 / 10 Both End Threaded Nipple and is able to withstand corrosion at higher velocities in marine applications, making it the favorable choice in submarine systems.

Cupro Nickel 90 Nipple | Cupro Nickel 90 Nipple | Cupro Nickel 90 Nipple | Cupro Nickel 90 Nipple | Cupro Nickel 90 Nipple | Cupro Nickel 90 Nipple | Cupro Nickel 90 Nipple | Cupro Nickel 90 Nipple | Cupro Nickel 90 Nipple

In addition, commissioning, shut – down and start – up measures of these CU-Ni 90 / 10 Concentric Swaged Nipple are compiled that are necessary for the establishment and re – establishment of the protective layer, where the latter involved copper – nickel granules and slit sheet. Our Copper Nickel 90 / 10 Eccentric Swaged Nipple is often used in automotive industry, such as for Power Steering Tube, Brake Lines, Screw Lamp Bases, and so on.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cu-Ni 90/10 Nipple
Specifications : ASTM B466, ASME SB466
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : 2 1/16” to 30”
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Cu-Ni 90/10 Nipple Chemical Composition

Cu-Ni 90/10 Cu Pb Mn Fe Zn Ni
88.6 min 0.05 max 1.0 max 1.8 max 1 max 9-11 max

Cu-Ni 90/10 Nipple Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.1 g/cm3 1443 °C (2430 °F) Psi – 35,000, MPa – 241 Psi -80,000, MPa -551 30 %

Equivalent Grades for Cu-Ni 90/10 Nipple

STANDARD UNS WERKSTOFF NR.
Cupro Nickel 90/10 C70600 2.0872
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Cu-Ni 90/10 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Cu-Ni 90/10 Nipple Test Certificates

We at Sachiya Steel International  provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Cupro Nickel 90 Nipple
cupro nickel forged nipple 1

Sachiya Steel International is a known manufacturer and exporter of Cupro Nickel 90 Nipple, which have only one phase since the copper nickel binary system shows complete solid solubility.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-06-21T11:07:54+05:30June 21st, 2021|

Titanium Gr 5 Nipple Manufacturers In India

Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 5 Nipple, which is the alloy used in motorsport and in aerospace. Titanium Grade 5 Hexagon Reducing Nipple demand high levels of reliable performance in surgery and medicine as well as in aerospace, automotive, chemical plant, power generation, oil and gas extraction, sports, and other major industries. Typical applications of Titanium Grade 5 Hexagon Nipple include compressor blades, discs, rings for jet engines, aircraft components, pressure vessels, rocket engine cases; the most versatile titanium alloy.

Referred to as the “work horse” grade, Titanium Grade 5 One End Threaded Nipple is most commonly found in the annealed condition and most widely used of all titanium alloys. The wrought Titanium Grade 5 Both End Threaded Nipple is used in aerospace, medical, and other applications where moderate strength, good strength to weight, and favorable corrosion properties are required.

Titanium Grade 5 Concentric Swaged Nipple has good tensile properties at ambient temperature and a useful creep resistance up to 300 Degree C (570 Degree F). Titanium Grade 5 Eccentric Swaged Nipple is used in the annealed condition and in the solution treated and aged condition. Some applications of Ti Gr. 5 Nipple include: compressor blades, discs, and rings for jet engines; airframe and space capsule components. Grade 5 Titanium Hexagon Reducing Nipple is the aerospace grade and is not cold formable, so it is used more often when no forming is needed.

Titanium Gr 5 Nipple Specification
Specifications : ASTM B366, ASME SB 366
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : ½” NB to 24″NB

Titanium Alloy Gr 5 Nipple Chemical Composition

Grade Ti C Fe H N O Al V
Ti Grade5 90 min – 0.25 max – – 0.2 max 6 min 4 min

Titanium Gr 5 Nipple Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 5 4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 %

Equivalent Grades for Titanium Gr 5 Nipple

STANDARD WERKSTOFF NR. UNS
Titanium Gr. 5 3.7165 N56400

Titanium Gr 5 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Titanium Alloy Gr 5 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Re   port, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-20T18:00:31+05:30June 16th, 2021|

Titanium Gr 2 Nipple Manufactures In India

Titanium Gr 2 Nipple Manufactures In India

Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Nipple, which are used even in aesthetic applications. Our Titanium Grade 2 Hexagon Reducing Nipple demand high levels of reliable performance in surgery and medicine as well as in aerospace, automotive, chemical plant, power generation, oil and gas extraction, sports, and other major industries.

Corrosion resistance is similar between these Titanium Grade 2 Hexagon Nipple but mechanical properties vary along with varying oxygen and iron contents. This Titanium Grade 2 One End Threaded Nipple is a widely used grade that offers a yield strength of 275MPa (40ksi) minimum. Our Titanium Grade 2 Both End Threaded Nipple has very high tensile strength and toughness (even at extreme temperatures). Titanium Grade 2 Concentric Swaged Nipple is unalloyed titanium and what is considered as “commercially pure” titanium.

Limited impurities are iron, nitrogen and oxygen in our Titanium Grade 2 Eccentric Swaged Nipple, where these elements raise the mechanical properties (hardness, yield and tensile strength) at the expense of elongation. In Commercially Pure Titanium Grade 2 Hex Nipple, the mechanical properties are controlled by the chemistry input; higher amounts of Nitrogen, Oxygen, and Iron will increase strength properties. Our Ti Gr. 2 Nipple has good cold forming characteristics and provides excellent corrosion resistance. Commercially pure, or CP, Ti Gr. 2 Hexagon Reducing Nipple is unalloyed, where at service temperature it consists of 100 % hcp alpha phase.

Titanium Gr 2 Nipple Specification 
Specifications : ASTM B366, ASME SB 366
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : ½” NB to 24″NB

Titanium Alloy Gr 2 Nipple Chemical Composition

Grade Ti C Fe H N O Al V
Ti Grade2 99.2 min 0.1 max 0.3 max 0.015 max 0.03 max 0.25 max – –

Titanium Gr 2 Nipple Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 2 4.5 g/cm3 1665 °C (3030 °F) Psi – 49900 , MPa – 344 Psi – 39900 , MPa – 275 20 %

Equivalent Grades for Titanium Gr 2 Nipple

STANDARD WERKSTOFF NR. UNS
Titanium Grade2 3.7035 R50400

Titanium Gr 2 Nipple

Titanium Gr 2 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Titanium Alloy Gr 2 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-03-26T12:34:47+05:30June 16th, 2021|

Super Duplex Steel S32750 Nipple Manufacture In India

Sachiya Steel International is one of the prominent Manufacture and Exporter of Super Duplex Steel S32750 Nipple, which has good weldability and post heat treatment of weld areas not required. Being a two – phase material (austenitic – ferritic) Super Duplex S32750 Hexagon Reducing Nipple will present a different tool wear profile from that of single – phase steels of type ASTM 304L.

It is recommended that a tougher insert grade is used than when machining austenitic stainless steels, e.g. Super Duplex S32760 Hexagon Nipple, where the cutting speeds must therefore be lower than that recommended for 304L. The maximum temperature of Super Duplex S32750 One End Threaded Nipple for long periods of service: 280 Degree C (536 Degree F); with 300 Degree C / 572 Degree F possible for short periods. Heat this Super Duplex S32760 Both End Threaded Nipple for up to 1025 Degree C – 1120 Degree C ensuring sufficient time is allowed for the center to achieve furnace temperature and hold for a time commensurate with the ruling section, followed by water quenching.

Super Duplex S32750 Concentric Swaged Nipple is readily weldable using many of the standard electric arc welding processes but oxyacetylene welding is not recommended because carbon pickup in the weld metal may occur. In addition, high resistance to crevice and stress corrosion coupled with the increased strength give Super Duplex S32760 Eccentric Swaged Nipple the advantage over the austenitic (300 series) and 22 % Cr duplex stainless steels.

Super Duplex Steel UNS S32750 / S32760 Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

Super Duplex Steel S32750 / S32760 Nipple Chemical Composition

S32750 / S32760 C N P Si Mn Mo Ni Cr S Other
0.030 0.24/0.32 0.035 0.80 1.20 3.0/5.0 6.00/8.00 24.0/26.0 0.020 Cu:0.50

Super Duplex Steel UNS S32750 / S32760 Nipple Mechanical Properties

S32750 / S32760 Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
7.8 g/cm3 1350 °C (2460 °F) Psi – 80000 , MPa – 550 Psi – 116000 , MPa – 800 15 %

Equivalent Grades for UNS S32750 / S32760 Nipple

STANDARD UNS WERKSTOFF NR.
Super Duplex S32750 S32750 1.4410
Super Duplex S32760 S32760 1.4410

Super Duplex Steel UNS S32750 / S32760 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Super Duplex Steel S32750 / S32760 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-21T12:12:45+05:30June 15th, 2021|

Duplex Steel S31803 Nipple Manufacture

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the prominent Manufacture and Exporter of Duplex Steel S31803 Nipple, which should be allowed to cool to below 300 Degree F between welding passes. Whenever hot forming is done, Duplex Steel S31803 Hexagon Reducing Nipple should be followed by a full solution anneal at 1900 Degree F minimum and rapid quench to restore phase balance, toughness, and corrosion resistance.

Stress relieving is not required or recommended; however, if it must be performed, Duplex S32205 Hexagon Nipple should receive a full solution anneal at 1900 Degree F minimum, followed by rapid cooling or water quenching. Stress relief treatments at any lower temperature for Duplex S31803 One End Threaded Nipple carry the risk of precipitation of detrimental intermetallic or non – metallic phases. As with all stainless steels, such as for Duplex Steel S32205 Both End Threaded Nipple, good joint preparation, alignment, and cleaning are essential for good quality welds.

Duplex Steel S31803 Nipple | Duplex Steel S31803 Nipple | Duplex Steel S31803 Nipple | Duplex Steel S31803 Nipple | Duplex Steel S31803 Nipple | Duplex Steel S31803 Nipple | Duplex Steel S31803 Nipple | Duplex Steel S31803 Nipple | Duplex Steel S31803 Nipple | Duplex Steel S31803 Nipple | Duplex Steel S31803 Nipple

Pre – heating of Duplex Steel S31803 Concentric Swaged Nipple is not necessary or desirable unless it is used only to prevent condensation, or in certain unusual cases involving connecting very light sections to very heavy sections. Hot cracking is not impossible but is much less likely to occur with Duplex Steel S32205 Eccentric Swaged Nipple than with austenitic materials. Weld zones in Duplex S32205 Nipple should be clean before welding and well shielded by inert gas, typically dry argon, during welding.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Duplex Steel UNS S31803 / S32205 Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Duplex Steel S31803 / S32205 Nipple Chemical Composition

S31803 / S32205 C N P Si Mn Mo Fe Cr S Ni
1.0 0.03 0.02 2.0 3.0 – 3.5 22.0 – 23.0 0.03 4.5 – 6.5 0.14 – 0.2 Bal

Duplex Steel UNS S31803 / S32205 Nipple Mechanical Properties

S31803 / S32205 Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
7.8 g/cm3 1350 °C (2460 °F) Psi – 80000 , MPa – 550 Psi – 116000 , MPa – 800 15 %

Equivalent Grades for UNS S31803 / S32205 Nipple

STANDARD UNS WERKSTOFF NR.
Duplex S31803 S31803 1.4462
Duplex S32205 S32205 1.4462
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Duplex Steel UNS S31803 / S32205 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Duplex Steel S31803 / S32205 Nipple Test Certificates[/su_heading]

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Duplex Steel S31803 Nipple
duplex steel 31803 swage nipples 500x500 1

Sachiya Steel International is one of the prominent Manufacture and Exporter of Duplex Steel S31803 Nipple, which should be allowed to cool to below 300 Degree F between welding passes.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-06-15T10:54:53+05:30June 15th, 2021|

Carbon Steel Nipple Manufacture

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is a known Manufacture and Exporter of Carbon Steel Nipple, which has shown good formability in a variety of fabrications. It is conceivable that material thicknesses for a project may be reduced if this Carbon Steel Hexagon Reducing Nipple is used, thus reducing cost without compromising quality. We recommend a maximum hot forming temperature for our Carbon Steel Hexagon Nipple in between 2010 Degree F and 2100 Degree F (1100 Degree C to 1150 Degree C).

If the shape of the work piece is not compact, the edges of this Carbon Steel One End Threaded Nipple may be significantly cooler than the bulk, and there is risk of cracking in the cooler regions. These precautions are necessary to avoid cross contamination of our CS Both End Threaded Nipple by easily corroded metals that may discolor the surface of the fabricated product.

Even when the equipment has sufficient power, allowance must be made for higher spring – back caused by the high strength of this Carbon Steel Concentric Swaged Nipple. Sachiya Steel International is one of the pioneer dealer and exporter of our Carbon Steel Eccentric Swaged Nipple, where tooling and work surfaces must be thoroughly cleaned before use. In the solution annealed condition from about 1925 Degree F, this CS Hex Nipple has a microstructure with about 40 % ferrite – 50% ferrite. Meanwhile, the high strength of our CS Hex Reducing Nipple can pose problems.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Carbon Steel Nipple Specification
Size : 1/2″ TO 4″
Range : 15 NB TO 100 NB IN 3000 LBS, 6000 LBS, 9000 LBS
Grade : ASTM / ASME A105/ A105N/ A694
Class : 150#, 300#, 400#, 600#, 900#, 1500# & 2500#
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Carbon Steel Nipple Chemical Composition

Element Carbon, max Manganese, max Phosphorus, max Sulfur, max
A105 0.29 % 1.20 % 0.04 % 0.15 %

CS Nipple Mechanical Properties

Grade Tensile, ksi Yield, min, ksi Elong %, min
A105 60 min — 18
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Carbon Steel Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

CS Nipples Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Carbon Steel Nipple
carbon steel nipples 500x500 1

Sachiya Steel International is a known Manufacture and Exporter of Carbon Steel Nipple, which has shown good formability in a variety of fabrications.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-06-14T11:24:46+05:30June 14th, 2021|

Nickel Alloy 201 Nipple Manufacturers In India

Nickel Alloy 201 Nipple Manufacturers In India

Sachiya Steel International is one of the pioneer Manufacture and exporter of quality Nickel Alloy 201 Nipple, which is obtained from nickel carbonyl by one of two processes. Nickel 201 Hexagon Reducing Nipple may be passed through a large chamber at high temperatures in which tens of thousands of nickel spheres, called pellets, are constantly stirred. The carbonyl of Nickel 201 Hexagon Nipple decomposes and deposits pure nickel onto the nickel spheres.

In the alternate process, nickel carbonyl of Nickel 201 One End Threaded Nipple is decomposed in a smaller chamber at 230 Degree C to create a fine nickel powder. Nickel 201 Both End Threaded Nipple is used in many specific and recognizable industrial and consumer products, including stainless steel, alnico magnets. Nickel 201 Concentric Swaged Nipple is pre – eminently an alloy metal, and its chief use is in nickel steels and nickel cast irons, in which it typically increases the tensile strength, toughness, and elastic limit.

Our Nickel 201 Eccentric Swaged Nipple is an excellent alloying agent for certain precious metals and is used in the fire assay as a collector of platinum group elements. As such, Ni 201 Nipple is used for plating and as a green tint in glass, and is also capable of fully collecting all elements from ores, and of partially collecting gold. Our Ni 201 Hexagon Reducing Nipple and other alloys are frequently used as catalysts for hydrogenation reactions.

Nickel Alloy 201 Nipple

Nickel Alloy 201 Nipple Specification
Specifications : ASTM B366, ASME SB 366
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : ½” NB to 24″NB

Nickel Alloy 201 Nipple Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Nickel 201 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min –

Nickel 201 Nipple Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for Nickel 201 Nipple

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 – LC-Ni 99

Nickel 201 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel Alloy 201 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-15T11:04:11+05:30June 14th, 2021|
LOGO 1200 X 300

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top