ASTM B167 Seamless Tube Manufacturer In India
We are leading Manufacturers, Supplier, Dealers, and Exporter of ASTM B167 seamless tube in India. Our ASTM B167 seamless tube is available in different sizes, shapes, and grades. We supply ASTM B167 seamless tube in most of the major Indian cities in more than 20 States. We Sachiya Steel International offer different types of grades like Stainless Steel tubes, Super Duplex Steel Tubes, Duplex Steel Tubes, Carbon Steel tubes, Alloys Steel tubes, Nickel Alloys tubes, Titanium Steel tubes, Inconel Steel tubes, Aluminium tubes, etc.
ASTM B167 Seamless Tube Specification
| Size | : | 6.00 mm OD up to 914.4 mm OD |
| Thickness | : | 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS |
| Length | : | Within 13500mm |
| Type | : | Seamless Pipes, Seamless Tubes |
| Grades | : | UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, N06696. |
ASTM B167 Seamless Tube Chemical Composition
The material under this specification ASTM B167 should adhere to the specified chemical composition limits for specified elements like nickel, chromium, iron, manganese, aluminum, carbon, copper, silicon, sulfur, molybdenum, cobalt, boron, titanium, niobium, phosphorous, zirconium, yttrium, and cerium.
| Elements | Chemical Composition | |
|---|---|---|
| Inconel 600 | Inconel 601 | |
| Nickel | 72.0 min | 58.0 to 63.0 |
| Chromium | 14.0 to 17.0 | 21.0 to 25.0 |
| Iron | 6.0 to 10.0 | Remainder |
| Manganese | 1.0 max | 1.5 max |
| Carbon | 0.15 max | 0.10 max |
| Copper | 0.5 max | 1.0 max |
| Silicon | 0.5 max | 0.5 max |
| Sulfur | 0.015 max | 0.015 max |
Mechanical Properties and Other Requirements
The ASTM B167 specifications requires material to adhere to following test methods performed on alloys, like chemical analysis, tension test, and hydrostatic or nondestructive electric test. The ASTM B167 specifications require material to conform to the following mechanical properties like Tensile strength, elongation, yield strength, and rounding methods.
| Grade Condition and Size | Tensile Strength, min, psi (MPa) | Elongation 2inches or 50.8mm or 4D min, % | Yield Strength (0.2% offset), min, psi (MPa) |
|---|---|---|---|
| Inconel 600 (UNS N06600): | |||
| Hot-Worked Annealed: | |||
| 5inches(127mm) in outside diameter and under | 80 000 (550 | 35 | 30 000 (205) |
| Over 5inches(127mm) in outside diameter | 75 000 (515) | 35 | 25 000 (170) |
| Cold-Worked Annealed: | |||
| 5inches(127mm) in outside diameter and under | 80 000 (550) | 30 | 35 000 (240) |
| Over 5inches(127mm) in outside diameter | 80 000 (550) | 35 | 30 000 (205) |
| Inconel 601 (UNS N06601): | |||
| Cold-Worked Annealed or Hot-Worked Annealed : | |||
| All Sizes | 80 000 (550) | 35 | 30 000 (205) |
