Wire Mesh Archives - Steel Pipes/Tubes Manufacturers, Top Pipe Suppliers

by Sachiya Steel International
October 12, 2022
Wire Mesh0

Hastelloy C22 Wire Mesh Manufacturer

 

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy C22 Wire Mesh, which can be welded by all common methods and are highly versatile. Displaying excellent resistance to stress corrosion cracking and non – oxidizing acids, Hastelloy C22 Hexagonal Wire Mesh have been used for numerous applications. Hastelloy C22 Welding Wire Mesh is the most versatile of the Alloys and is widely used for chemical process equipment applications due to their excellent resistance to non – oxidizing environments. Water – base coolant should be premium quality for Hastelloy C22 Netting Wire Mesh, sulfochlorinated water soluble oil or chemical emulsion with extreme pressure additives.

Hastelloy C22 Wire Mesh Manufacturer In India | Hastelloy C22 Wire Mesh Manufacturer In Mumbai | Hastelloy C22 Wire Mesh Exporter In India | Hastelloy C22 Wire Mesh Exporter In Mumbai | Hastelloy C22 Wire Mesh Supplier In India | Hastelloy C22 Wire Mesh Supplier In Mumbai | Hastelloy C22 Wire Mesh Stockist In India | Hastelloy C22 Wire Mesh Stockist In Mumbai

 

Hastelloy C22 Wire Mesh
  Hastelloy C22 Wire Mesh

Water – base coolant of Hastelloy C22 Woven Wire Mesh may cause chipping and rapid failure of carbide tools in interrupted cuts. Hastelloy C22 Spring Steel Wire Mesh is an alloy that is precipitation harden able for high mechanical properties. Alloy C22 Hexagonal Wire Mesh maintains good strength and oxidation resistance at temperatures up to about 1300 Degree F (700 Degree C).

The high strength and excellent fabrication characteristics of Alloy C22 Welding Wire Mesh make it useful for various components of aircraft and industrial gas turbines. Alloy C22 Netting Wire Mesh has good resistance to corrosion and oxidation along with high tensile and creep-rupture properties at temperatures to 1300 Degree C. Applications of Alloy C22 Woven Wire Mesh include blades, vanes, shafts, tail cones, afterburners, springs, and fasteners.

Hastelloy C22 Wiremesh Specifications
Specifications : ASTM / ASME B574 / SB574
Standard : ASTM, ASME
Size : 15NB to 150NB In
Types : Wire Mesh, Hexagonal Wiremesh, Welding Wiremesh, Netting Wiremesh, Woven Wiremesh, Spring Steel wire mesh, Fencing Wiremesh etc.
Hastelloy C22 Wire Mesh Chemical Composition

 

Grade C Mn Si S Co Ni Cr Fe Mo P
C22 0.010 max 0.50 max 0.08 max 0.02 max 2.50 max 50.015 min* 20.00 – 22.50 2.00 – 6.00 12.50 – 14.50 0.02 max
Alloy C22 Wiremesh Mechanical Properties

 

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C22 8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %
Equivalent Grades for C22 Hastelloy Wiremesh

 

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C22 2.4602 N06022 NW 6022 – NiCr21Mo14W –
Alloy C22 Wire Mesh Application Industries

 

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
C22 Hastelloy Wiremesh Test Certificates

 

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

 

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

CONTINUE READING
by Sachiya Steel International
December 23, 2021
Wire Mesh

Brass Wire Mesh Manufacturer

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Brass Wire Mesh, where the lower ductility restricts some very severe operations. Brass Hexagonal Wire Mesh has a higher yield strength, higher tensile strength and lower work hardening rate compared to 316. Brass Welding Wire Mesh has quite good deep drawing capability; close to that of 316, but it has limited ability to stretch form. If very severe cold working is required in Brass Netting Wire Mesh, it may be necessary to carry out an intermediate anneal. Brass Woven Wire Mesh is an austenitic stainless steel grade with a useful combination of corrosion resistance and high strength.

Because it has almost no molybdenum and low nickel content, Brass Spring Steel Wire Mesh is an economical alternative to 304 or 316 in some applications. Brass Fencing Wire Mesh cannot be hardened by thermal treatment, but does work harden. We are proactive organization Specialist in Brass Hex Wire Mesh and other quality products that meet and exceed customer’s specific requirements and thus ensure complete satisfaction.

Brass Wire Mesh
Brass Wire Mesh

Brass Wire Mesh is easier to machine than the standard austenitic grades such as 316, but the grade is not commonly available as a bar. Our spherical Brass Welding Wire Mesh has a high level of sphericity, low oxygen content, high density (bulk and tapped) and as well as controlled grain size.

Brass Wire mesh Specifications
Specifications : ASTM B62 / ASME SB62
Standard : ASTM, ASME and API
Length : 100 mm To 3000 mm Long & Above
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.

Brass Wire Mesh Chemical Composition

Brass Cu Fe Pb Zn
Min./Max. 60.0-63.0 0.35 2.5-3.0 Rem.
Nominal 61.5 – 2.7 35.4

Brass Wire Mesh Physical Properties

Properties US Customary
Melting Point -Liquidus 1650 F
Melting Point -Solidus 1630 F
Density 0.307 lb/in3at 68 F
Electrical Resistivity 39.90 ohms – cmil/ft @ 68 F
Electrical Conductivity 26 %IACS @ 68 F
Thermal Conductivity 67 Btu · ft/(hr · ft2·oF)at 68F
Modulas of Elasticity in Tension 14000 ksi

Brass Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Brass Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Brass Wire Mesh
Brass Wire Mesh Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Brass Wire Mesh, where the lower ductility restricts some very severe operations. Brass Hexagonal Wire Mesh has a higher yield strength, higher tensile strength and lower work hardening rate compared to 316

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
CONTINUE READING
by Sachiya Steel International
December 22, 2021
Wire Mesh

Copper Wire Mesh Manufacturer

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Copper Wire Mesh, where our offered products are quality approved. Our company has responded to all & every need of industry for Copper Hexagonal Wire Mesh as one of top and the most reputed company. The use of Copper Welding Wire Mesh in air – conditioning and refrigeration systems has grown steadily in recent years. Our stucco embossed Copper Netting Wire Mesh provides a white or silver easy to clean surface, where either side is usable and the pattern looks the same.

The white painted side of Copper Woven Wire Mesh has slight, but consistent imperfections and does not have a PVC coating. Our company is also engaged in providing Repairing Service of Copper Spring Steel Wire Mesh in our industry, where it is renowned among the customers due to quality products and affordable prices. We focus on service of Copper Fencing Wire Mesh, which provided with the international quality air – conditioning and refrigeration units for industrial, commercial and domestic purpose.

Copper Wire Mesh
Copper Wire Mesh

Available with us at industry leading prices, Copper Hexagonal Wire Mesh are widely used in the construction industries. Reckoned for accurate composition, Copper Welding Wire Mesh is extensively used in air conditioning and refrigeration systems. Copper Netting Wire Mesh is used for refrigerator, water dispenser, air – conditioner, and various other building installations. Understanding the diversified needs of clients, we offer customized solutions of Copper Woven Wire Mesh to them.

Copper Wire mesh Specifications
Specifications : ASTM B62 / ASME SB62
Standard : ASTM, ASME and API
Length : 100 mm To 3000 mm Long & Above
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.

Copper Wire Mesh Chemical Composition

Standard Copper NO. Chemical Composition Mechanical Properties
CU% P% Temper Tensile strength (Mpa) Elongation (%) Average Grain Size (mm)
ASTM
B280/62		 C12200 >99.9 0.015 to 0.040 >60 >205 >40 >0.040
>50 >245

Copper Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Copper Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Copper Wire Mesh
Copper Wire Mesh Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Copper Wire Mesh, where our offered products are quality approved. Our company has responded to all & every need of industry for Copper Hexagonal Wire Mesh as one of top and the most reputed company.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
CONTINUE READING
by Sachiya Steel International
December 22, 2021
Wire Mesh

Cupro Nickel 70 Wire Mesh Manufacturer

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Cupro Nickel 70 Wire Mesh, which are largely used in various industries and is also available in different sizes and shapes for clients. A large quantity of nickel in our Cu-Ni 70 / 30 Hexagonal Wire Mesh is also present in inter-dendritic regions where the dendrite structure is broken by mechanical treatments. We offer the full spectrum of product types in this Cupro Nickel 70 / 30 Welding Wire Mesh in both Metric and EMMUA size ranges catering for all applications. Our competitively priced Copper Nickel 70 / 30 Netting Wire Mesh is acknowledged for their high tensile strength, durable finish standards, corrosion resistance and sturdy designs.

Cupro Nickel 70 Wire Mesh Manufacturer In India| Cupro Nickel 70 Wire Mesh Manufacturer In Mumbai| Cupro Nickel 70 Wire Mesh Exporter In India | Cupro Nickel 70 Wire Mesh Exporter In Mumbai | Cupro Nickel 70 Wire Mesh Supplier In India | Cupro Nickel 70 Wire Mesh Supplier In Mumbai | Cupro Nickel 70 Wire Mesh Stockist In India | Cupro Nickel 70 Wire Mesh Stockist In Mumbai

We are engaged in manufacturing, supplying and exporting an incomparable range of these Cu-Ni 70 / 30 Woven Wire Mesh, which is among the corrosion resistant copper alloys, protecting against moisture, acids, alkalis and salt solutions, organic acids and gases such as oxygen, chlorine and carbon dioxide. Our esteemed clients can avail from us a wide gamut of our Cupro Nickel 70 / 30 Spring Steel Wire Mesh which have gained appreciation for its national and international quality standards.

Cupro Nickel 70 Wire Mesh
Cupro Nickel 70 Wire Mesh

These Copper Nickel 70 / 30 Fencing Wire Mesh has some great features such as General / Localized / Pitting and Crevice Corrosion; Stress Corrosion Cracking; Velocity Effects; Sand Erosion; Galvanic Properties; Ammonia; Sulfides; Seawater Treatments; Corrosion in Condenser and Heat Exchange Systems.

Cu-Ni 70/30 Wire mesh Specifications
Specifications : ASTM B111 / ASME SB111
Standard : ASTM, ASME and API
Length : 100 mm To 3000 mm Long & Above
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.

Cu-Ni 70/30 Wire Mesh Chemical Composition

Cu-Ni 70/30 Cu Pb Mn Fe Zn Ni
88.6 min 0.05 max 1.0 max 1.8 max 1 max 9-11 max

Copper Nickel 70/30 Wire mesh Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.1 g/cm3 1443 °C (2430 °F) Psi – 35,000, MPa – 241 Psi -80,000, MPa -551 30 %

Equivalent Grades for Cu-Ni 70/30 Wire mesh

STANDARD UNS WERKSTOFF NR.
Cupro Nickel 70/30 C71500 2.0882

Cu-Ni 70/30 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

70/30 Cu-Ni Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Cupro Nickel 70 Wire Mesh
Cupro Nickel 70 Wire Mesh Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Cupro Nickel 70 Wire Mesh, which are largely used in various industries and is also available in different sizes and shapes for clients. A large quantity of nickel in our Cu-Ni 70 / 30 Hexagonal Wire Mesh is also present in inter-dendritic regions where the dendrite structure is broken by mechanical treatments

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
CONTINUE READING
by Sachiya Steel International
December 21, 2021
Wire Mesh

Cupro Nickel 90 Wire Mesh Manufacturer

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Cupro Nickel 90 Wire Mesh, Copper Nickel 90 / 10 Hexagonal Wire Mesh has some of the attractive characteristics such as excellent resistance to uniform corrosion, remarkable resistance to localized corrosion in chlorinated seawater, and higher erosion resistance than other copper alloys and steel. This Cupro Nickel 90 / 10 Welding Wire Mesh still enjoy widespread use today not only for many navies but also in commercial shipping, floating production, storage and offloading vessels (FPSOs), and in multistage flash desalination.

Cupro Nickel 90 Wire Mesh Manufacturer In India| Cupro Nickel 90 Wire Mesh Manufacturer In Mumbai | Cupro Nickel 90 Wire Mesh Exporter In India | Cupro Nickel 90 Wire Mesh Exporter In Mumbai| Cupro Nickel 90 Wire Mesh Supplier In India| Cupro Nickel 90 Wire Mesh Supplier In Mumbai| Cupro Nickel 90 Wire Mesh Stockist In India| Cupro Nickel 90 Wire Mesh Stockist In Mumbai

Our Copper Nickel 90 / 10 Netting Wire Mesh is excellent on hot and cold workability and is resistant towards atmospheric, brackish water, sea water and non – oxidizing acid corrosion. This Cupro Nickel 90 / 10 Woven Wire Mesh resists corrosion by fast moving water, which is as well highly resistant to SCC. Our Copper Nickel 90 / 10 Spring Steel Wire Mesh is a copper – nickel alloy with an alpha phase structure, where the cast structures have alpha dendrites that contain huge quantities of nickel content.

Cupro Nickel 90 Wire Mesh
Cupro Nickel 90 Wire Mesh

These Cupro Nickel 90 / 10 Fencing Wire Mesh has undergone tests that indicate it has excellent antimicrobial properties. Our Cu-Ni 90 / 10 Wire Mesh is widely used in marine service, offshore platform sea water piping, tidewater power plants, desalination plants, oil refineries, and in the chemical process industry. Of all commercial copper alloys, these Copper Nickel 90 / 10 Wire Mesh offers the best resistance to aqueous corrosion.

Cu-Ni 90/10 Wire mesh Specifications
Specifications : ASTM B111 / ASME SB111
Standard : ASTM, ASME and API
Length : 100 mm To 3000 mm Long & Above
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.

Cu-Ni 90/10 Wire Mesh Chemical Composition

Cu-Ni 90/10 Cu Pb Mn Fe Zn Ni
88.6 min 0.05 max 1.0 max 1.8 max 1 max 9-11 max

Cupro Nickel 90/10 Wire mesh Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.1 g/cm3 1443 °C (2430 °F) Psi – 35,000, MPa – 241 Psi -80,000, MPa -551 30 %

Equivalent Grades for Copper Nickel 90/10 Wire mesh

STANDARD UNS WERKSTOFF NR.
Cupro Nickel 90/10 C70600 2.0872

Cu-Ni 90/10 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

90/10 Cu-Ni Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Cupro Nickel 90 Wire Mesh
Cupro Nickel 90 Wire Mesh Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Cupro Nickel 90 Wire Mesh, Copper Nickel 90 / 10 Hexagonal Wire Mesh has some of the attractive characteristics such as excellent resistance to uniform corrosion, remarkable resistance to localized corrosion in chlorinated seawater, and higher erosion resistance than other copper alloys and steel.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
CONTINUE READING
by Sachiya Steel International
December 21, 2021
Wire Mesh

Titanium Gr 2 Wire Mesh Manufacturer

 

Sachiya Steel International is one of the leading Manufacturer And Exporter Of High Quality Titanium Gr 2 Wire Mesh, which are unalloyed Commercially Pure (CP) Titanium. Our Titanium Grade 2 Hexagonal Wire Mesh is used based on the corrosion resistance, ductility and strength requirements of the specific application. Titanium Grade 2 Welding Wire Mesh is called the “workhorse” of the commercially pure titanium industry, thanks to its varied usability and wide availability. This film makes the commercially pure Titanium Grade 2 Netting Wire Mesh which are resistant to most oxidizing, neutral and inhibited reducing as well as mildly reducing environments.

Titanium Gr 2 Wire Mesh Manufacturer In India| Titanium Gr 2 Wire Mesh Manufacturer In Mumbai| Titanium Gr 2 Wire Mesh Exporter In India| Titanium Gr 2 Wire Mesh Exporter In Mumbai | Titanium Gr 2 Wire Mesh Supplier In India| Titanium Gr 2 Wire Mesh Supplier In Mumbai | Titanium Gr 2 Wire Mesh Stockist In India| Titanium Gr 2 Wire Mesh Stockist In Mumbai

Titanium Grade 2 Woven Wire Mesh is often used in Aerospace industry, Chemical and marine applications, Electroplating industry, and Medical industry. Although “commercially pure”, Titanium Grade 2 Spring Steel Wire Mesh has acceptable mechanical properties and has been used for orthopedic and dental implants.

Titanium Gr 2 Wire Mesh
Titanium Gr 2 Wire Mesh

For most applications, Titanium Grade 2 Fencing Wire Mesh is alloyed with small amounts of aluminum and vanadium, typically 6 % and 4 % respectively, by weight. Ti Alloy Gr. 2 Wire Mesh is the most commonly used Titanium worldwide and is the most commonly used alloy in the oilfield. Ti Alloy Gr. 2 Hexagonal Wire Mesh can easily be cold rolled, but cold drawing is very difficult because of frequent seizing on the die. Ti Alloy Gr. 2 Welding Wire Mesh is used in a variety of industries such as chemical, marine, medical, recreational, and aerospace.

Titanium Gr 2 Wire mesh Specifications
Specifications : ASTM B348 / ASME SB348
Standard : ASTM, ASME
Size : Dia6.0-200mm x Length1000-6000mm
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.

Titanium Gr 2 Wire Mesh Chemical Composition

Grade Ti C Fe H N O Al V
Ti Grade2 99.2 min 0.1 max 0.3 max 0.015 max 0.03 max 0.25 max – –

Ti Gr 2 Wire mesh Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 2 4.5 g/cm3 1665 °C (3030 °F) Psi – 49900 , MPa – 344 Psi – 39900 , MPa – 275 20 %

Equivalent Grades for Gr 2 Titanium Wire mesh

STANDARD WERKSTOFF NR. UNS
Titanium Grade2 3.7035 R50400

Ti Gr 2 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Gr 2 Titanium Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Titanium Gr 2 Wire Mesh
Titanium Gr 2 Wire Mesh Manufacturer

Sachiya Steel International is one of the leading Manufacturer And Exporter Of High Quality Titanium Gr 2 Wire Mesh, which are unalloyed Commercially Pure (CP) Titanium. Our Titanium Grade 2 Hexagonal Wire Mesh is used based on the corrosion resistance, ductility and strength requirements of the specific application.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
CONTINUE READING
by Sachiya Steel International
December 20, 2021
Wire Mesh

Super Duplex S32750 Wire Mesh Manufacturer

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Super Duplex S32750 Wire Mesh, which can readily be used down to at least -50 Degree C. Super Duplex S32750 Hexagonal Wire Mesh is extremely corrosion resistant, work harden able alloys, where their microstructures consist of a mixture of austenite and ferrite phases. As a result, Super Duplex S32760 Welding Wire Mesh display properties characteristic of both austenitic and ferritic stainless steels. Combination of austenitic and ferritic properties in Super Duplex S32750 Netting Wire Mesh can mean some compromise when compared with pure austenitic and pure ferritic grades.

Super Duplex S32750 Wire Mesh Manufacturer In India | Super Duplex S32750 Wire Mesh Manufacturer In Mumbai | Super Duplex S32750 Wire Mesh Exporter In India| Super Duplex S32750 Wire Mesh Exporter In Mumbai | Super Duplex S32750 Wire Mesh Supplier In India | Super Duplex S32750 Wire Mesh Supplier In Mumbai| Super Duplex S32750 Wire Mesh Stockist In India | Super Duplex S32750 Wire Mesh Stockist In Mumbai

Super Duplex S32760 Woven Wire Mesh is in most cases, tougher than ferritic stainless steels, where tooling and work surfaces must be thoroughly cleaned before use. Strengths of Super Duplex S32750 Spring Steel Wire Mesh can in some cases be double that for austenitic stainless steels. Whilst Super Duplex S32760 Fencing Wire Mesh is considered resistant to stress corrosion cracking, they are not as resistant to this form of attack as ferritic stainless steels.

Super Duplex S32750 Wire Mesh
Super Duplex S32750 Wire Mesh

However, the corrosion resistance of the least resistant Super Duplex S32750 Wire Mesh is greater than that for the most commonly used grades of stainless steels, i.e. Type 304 and Type 316. Super Duplex S32750 Wire Mesh are also magnetic, a property that can be used to easily differentiate them from common austenitic grades of stainless.

Super Duplex S32750/ S32760 Wire mesh Specifications
Specifications : ASTM A276, A479 / ASME SA276, SA479
Standard : ASTM, ASME
Size : 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.

Super Duplex Steel S32750 / S32760 Wire Mesh Chemical Composition

S32750 / S32760 C N P Si Mn Mo Ni Cr S Other
0.030 0.24/0.32 0.035 0.80 1.20 3.0/5.0 6.00/8.00 24.0/26.0 0.020 Cu:0.50

Super Duplex UNS S32750 / S32760 Wire mesh Mechanical Properties

S32750 / S32760 Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
7.8 g/cm3 1350 °C (2460 °F) Psi – 80000 , MPa – 550 Psi – 116000 , MPa – 800 15 %

Equivalent Grades for UNS S32750 / S32760 Wire mesh

STANDARD UNS WERKSTOFF NR.
Super Duplex S32750 S32750 1.4410
Super Duplex S32760 S32760 1.4410

Super Duplex UNS S32750 / S32760 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Super Duplex Steel Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Super Duplex S32750 Wire Mesh
Super Duplex S32750 Wire Mesh Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Super Duplex S32750 Wire Mesh, which can readily be used down to at least -50 Degree C. Super Duplex S32750 Hexagonal Wire Mesh is extremely corrosion resistant, work harden able alloys, where their microstructures consist of a mixture of austenite and ferrite phases.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
CONTINUE READING
by Sachiya Steel International
December 20, 2021
Wire Mesh

Duplex Steel S31803 Wire Mesh Manufacturer

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality of Duplex Steel S31803 Wire Mesh, which has superior corrosion resistance compares to SS 304 and SS 316. The general use for our Duplex S31803 Hexagonal Wire Mesh is in the manufacture of chemicals such as sulphuric and phosphoric acids. General corrosion resistance of this Duplex S32205 Welding Wire Mesh is characterized by uniform attack on a flat surface in contact with a corrosive media. Pitting corrosion resistance increases in our Duplex S31803 Netting Wire Mesh with increasing chromium, molybdenum, and nitrogen contents.

Duplex Steel S31803 Wire Mesh Manufacturer In India | Duplex Steel S31803 Wire Mesh Manufacturer In Mumbai | Duplex Steel S31803 Wire Mesh Exporter In India | Duplex Steel S31803 Wire Mesh Exporter In Mumbai | Duplex Steel S31803 Wire Mesh Supplier In India| Duplex Steel S31803 Wire Mesh Supplier In Mumbai | Duplex Steel S31803 Wire Mesh Exporter In India| Duplex Steel S31803 Wire Mesh Exporter In Mumbai

As such, this Duplex S32205 Woven Wire Mesh shows higher PREN (Pitting Resistance Equivalent Number) values than the typical austenitic grades. When exposed to standard medium of H2S sour gas for duration of 720 hours, our Duplex S31803 Spring Steel Wire Mesh has results that are comparable to a super – austenitic 904L. This Duplex S32205 Fencing Wire Mesh is chemically balanced to obtain a two phase ferrite and austenite structure containing between 40 % to 60 % ferrite.

Duplex Steel S31803 Wire Mesh
Duplex Steel S31803 Wire Mesh

A typical structure of our Duplex S31803 Fencing Wire Mesh is shown when the material was hot rolled and solution annealed. This Duplex S32205 Spring Steel Wire Mesh is sensitive to the precipitation of inter – metallic phases that can degrade the corrosion resistance and mechanical properties. Meanwhile, the high strength of our Duplex S31803 Woven Wire Mesh can pose problems.

Duplex 31803 / S32205 Wire mesh Specifications
Specifications : ASTM A276, A479 / ASME SA276, SA479
Standard : ASTM, ASME
Size : 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.

Duplex Steel S31803 / S32205 Wire Mesh Chemical Composition

S31803 / S32205 C N P Si Mn Mo Fe Cr S Ni
1.0 0.03 0.02 2.0 3.0 – 3.5 22.0 – 23.0 0.03 4.5 – 6.5 0.14 – 0.2 Bal

Duplex UNS S31803 / S32205 Wire mesh Mechanical Properties

S31803 / S32205 Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
7.8 g/cm3 1350 °C (2460 °F) Psi – 80000 , MPa – 550 Psi – 116000 , MPa – 800 15 %

Equivalent Grades for UNS S31803 / S32205 Wire mesh

STANDARD UNS WERKSTOFF NR.
Duplex S31803 S31803 1.4462
Duplex S32205 S32205 1.4462

Duplex UNS S31803 / S32205 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Duplex Steel Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Duplex Steel S31803 Wire Mesh
Duplex Steel S31803 Wire Mesh Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality of Duplex Steel S31803 Wire Mesh, which has superior corrosion resistance compares to SS 304 and SS 316. The general use for our Duplex S31803 Hexagonal Wire Mesh is in the manufacture of chemicals such as sulphuric and phosphoric acids.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
CONTINUE READING
by Sachiya Steel International
December 18, 2021
Wire Mesh

Nickel Alloy 201 Wire Mesh Manufacturer

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Wire Mesh, which is the low carbon variant of Ni 200. The larger part of Nickel 201 Hexagonal Wire Mesh that is released to the environment will adsorb to sediment or soil particles and become immobile as a result. Nickel 201 Welding Wire Mesh can also end up in surface water when it is a part of waste water streams. Nickel 201 Netting Wire Mesh is primarily used for parts that require strong magnetic properties and excellent corrosion resistance. Nickel 201 Woven Wire Mesh is pure wrought Nickel with high ductile capabilities.

Nickel Alloy 201 Wire Mesh Manufacturer In India| Nickel Alloy 201 Wire Mesh Manufacturer In Mumbai| Nickel Alloy 201 Wire Mesh Exporter In India| Nickel Alloy 201 Wire Mesh Exporter In Mumbai | Nickel Alloy 201 Wire Mesh Supplier In India| Nickel Alloy 201 Wire Mesh Supplier In Mumbai| Nickel Alloy 201 Wire Mesh Stockist In India| Nickel Alloy 201 Wire Mesh Stockist In Mumbai

Nickel 201 Spring Steel Wire Mesh is ferromagnetic and has high levels of thermal and electrical conductivity. Nickel 201 Fencing Wire Mesh can be used in reducing and oxidizing environments. Alloy 201 Wire Mesh is virtually immune to stress cracking corrosion, and thus is ideal for use in both fresh and seawater processes.

Nickel Alloy 201 Wire Mesh
Nickel Alloy 201 Wire Mesh

At the end of their useful life, nickel – containing products such as Ni 201 Wire Mesh can be collected and recycled for future use and re – use. Ni 201 Hexagonal Wire Mesh is one of the most recycled materials globally, where it is collected and recycled, mostly in the form of alloys. Phenol is commonly stored and transported in steel tanks and tank cars because Ni 201 Welding Wire Mesh protects the phenol from contamination and discoloration.

Nickel 201 Wire mesh Specifications
Specifications : ASTM / ASME B160 / SB160
Standard : ASTM, ASME
Length : 100 mm To 3000 mm Long & Above
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.

Nickel 201 Wire Mesh Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Nickel 201 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min –

Alloy 201 Wire mesh Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 201 Nickel Wire mesh

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 – LC-Ni 99

Alloy 201 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

201 Nickel Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Nickel Alloy 201 Wire Mesh
Nickel Alloy 201 Wire Mesh Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Wire Mesh, which is the low carbon variant of Ni 200. The larger part of Nickel 201 Hexagonal Wire Mesh that is released to the environment will adsorb to sediment or soil particles and become immobile as a result. Nickel 201 Welding Wire Mesh can also end up in surface water when it is a part of waste water streams.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
CONTINUE READING
by Sachiya Steel International
December 18, 2021
Wire Mesh

Nickel Alloy 200 Wire Mesh Manufacturer

 

Sachiya steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Wire Mesh, where its velocity depends on geometry and pipe diameter. In seawater, Nickel 200 Hexagonal Wire Mesh has excellent corrosion rates which remain low as long as the maximum design flow velocity is not exceeded. Nickel 200 Welding Wire Mesh has high resistance to crevice corrosion, stress corrosion cracking and hydrogen embrittlement that can be troublesome to other alloy systems. Nickel 200 Netting Wire Mesh naturally form a thin protective surface layer over the first several weeks of exposure to seawater and this provides its on-going resistance.

Nickel Alloy 200 Wire Mesh Manufacturer In India| Nickel Alloy 200 Wire Mesh Manufacturer In Mumbai | Nickel Alloy 200 Wire Mesh Exporter In India| Nickel Alloy 200 Wire Mesh Exporter In Mumbai| Nickel Alloy 200 Wire Mesh Supplier In India| Nickel Alloy 200 Wire Mesh Supplier In Mumbai | Nickel Alloy 200 Wire Mesh Stockist In India| Nickel Alloy 200 Wire Mesh In Mumbai

Additionally, Nickel 200 Woven Wire Mesh have a high inherent bio – fouling resistance to attachment by macro – foulers (e.g. sea – grasses and molluscs) living in the seawater. To use its property to full potential, Nickel 200 Spring Steel Wire Mesh needs to be free of the effects of, or insulated from, any form of cathodic protection. Our Nickel 200 Fencing Wire Mesh can show high corrosion rates in polluted or stagnant seawater when sulphide or ammonia are present.

Nickel Alloy 200 Wire Mesh
Nickel Alloy 200 Wire Mesh

Alloy 200 Hexagonal Wire Mesh is important, therefore, to avoid exposure to such conditions, particularly during commissioning and refit while the surface films are maturing. Ferrous sulphide in our Alloy 200 Welding Wire Mesh dosing to sea water systems can provide improved resistance, which is possible by both welding and brazing.

Nickel 200 Wire mesh Specifications
Specifications : ASTM / ASME B160 / SB160
Standard : ASTM, ASME
Length : 100 mm To 3000 mm Long & Above
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.

Nickel 200 Wire Mesh Chemical Composition

Nickel 200 Ni C Mo Mn Si Fe P S Cu Cr
99.0 min 0.15 max – 0.35 max 0.1 max 0.4 max – 0.01 max 0.25 max –

Alloy 200 Wire mesh Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 21500 , MPa – 148 Psi – 67000 , MPa – 462 45 %

Equivalent Grades for 200 Nickel Wire mesh

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Nickel 200 N02200 2.4066 N-100M Ni 99.2 NW 2200 NA 11 НП-2

Alloy 200 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

200 Nickel Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Nickel Alloy 200 Wire Mesh
Nickel Alloy 200 Wire Mesh Manufacturer

Sachiya steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Wire Mesh, where its velocity depends on geometry and pipe diameter. In seawater, Nickel 200 Hexagonal Wire Mesh has excellent corrosion rates which remain low as long as the maximum design flow velocity is not exceeded.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
CONTINUE READING

Older Posts

Mumbai

Headquarters


D-2, Office no. 3, Gr. Floor, Bharat Nagar Society, Grant Road (E), Mumbai – 400007.
+91 9769056007
+91 22 66518863
[email protected][email protected]
LOCATIONS

We Are Everywhere

Nickel Alloy 200 Wire Mesh Manufacturer
OUR NETWORK india
MumbaiDelhiChennai
About Us

Sachiya Steel International

We are an ISO 9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.

We are an ISO TUV  9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.