wire mesh manufacturers in pune

Hastelloy B2 Wire Mesh Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy B2 Wire Mesh, which offers resistance to pitting corrosion. Our Hastelloy B2 Hexagonal Wire Mesh should not be used in oxidizing media or where oxidizing contaminants are available in reducing media. Premature failure may occur if this Hastelloy B2 Welding Wire Mesh is used where iron or copper is present in a system containing hydrochloric acid. Wrought forms of our Hastelloy B2 Netting Wire Mesh are furnished in the solution heat – treated condition unless otherwise specified.

Hastelloy B2 Wire Mesh Manufacturer In India| Hastelloy B2 Wire Mesh Manufacturer In Mumbai | Hastelloy B2 Wire Mesh Exporter In India| Hastelloy B2 Wire Mesh Exporter In Mumbai | Hastelloy B2 Wire Mesh Supplier In India| Hastelloy B2 Wire Mesh Supplier In Mumbai | Hastelloy B2 Wire Mesh Stockist In India| Hastelloy B2 Wire Mesh Stockist In Mumbai

This Hastelloy B2 Woven Wire Mesh, except for bright annealed sheet and strip, is solution heat – treated at 1950 Degree F (1066 Degree C) and rapid quenched. Bright annealed products such as our Hastelloy B2 Spring Steel Wire Mesh are heat – treated at 2100 Degree F (1149 Degree C) and cooled in hydrogen. Because Hastelloy B2 Fencing Wire Mesh contains no significant chromium addition, it should NOT be used in oxidizing media or in presence of oxidizing salts, such as ferric or cupric salts.

Hastelloy B2 Wire Mesh

Hastelloy B2 Wire Mesh

Our Alloy B2 Wire Mesh may form when iron or copper is present in a system containing hydrochloric acid. Likewise, this Alloy B2 Hexagonal Wire Mesh does not withstand wet chlorine gas or hypochlorite bleach. In oxidizing gases such as air, our Alloy B2 Welding Wire Mesh may be used at temperatures up to 1000 Degree F (538 Degree C).

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy B2 Wire mesh Specifications
Specifications : ASTM / ASME B335 / SB335
Standard : ASTM, ASME
Size : 15NB to 150NB In
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy B2 Wire Mesh Chemical Composition
Hastelloy B2 Ni C Mo Mn Si Fe P S Co Cr
Balance 0.02 max 26.0-30.0 1.0 max 0.10 max 2.0 max 0.040 max 0.030 max 1.0 max 1.0 max
Alloy B2 Wire mesh Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
9.2 g/cm3 1370 °C (2500 °F) Psi – 51,000, MPa – 350 Psi -1,10,000, MPa -760 40 %
Equivalent Grades for B2 Hastelloy Wire mesh
STANDARD UNS WERKSTOFF NR.
Hastelloy B2 N10665 2.4617
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Alloy B2 Wire Mesh Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
B2 Hastelloy Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy B2 Wire Mesh
Hastelloy B2 Wire Mesh 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy B2 Wire Mesh, which offers resistance to pitting corrosion. Our Hastelloy B2 Hexagonal Wire Mesh should not be used in oxidizing media or where oxidizing contaminants are available in reducing media.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-12-17T10:48:23+05:30December 17th, 2021|

Hastelloy C276 Wire Mesh Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy C276 Wire Mesh, where an in – process anneal may be necessary with a high degree of cold working. Hastelloy C276 Hexagonal Wire Mesh should preferably be machined in the annealed condition, where a post weld heat treatment is not necessary. Since Alloy C276 Welding Wire Mesh is prone to work – hardening, only low cutting speeds should be used and the cutting tool should be engaged at all times. Hastelloy C276 Netting Wire Mesh can be readily welded by most standard processes including GTAW (TIG), PLASMA, GMAW (MIG / MAG) and SMAW (MMA).

Hastelloy C276 Woven Wire Mesh should be in the annealed condition for cold working. Hastelloy C276 Spring Steel Wire Mesh has a higher work – hardening rate than the austenitic stainless steels which should be taken into consideration. The corrosion – resistant of Hastelloy C276 Fencing Wire Mesh are widely used by the chemical processing industries.

Hastelloy C276 Wire Mesh

The need for reliable performance leads to the acceptance and growth of Alloy C276 Hexagonal Wire Mesh in the areas of geothermal, solar energy, oil and gas and pharmaceutical. The benefits of process equipment of Alloy C276 Welding Wire Mesh include high resistance to uniform attack, outstanding localized corrosion resistance, excellent stress corrosion cracking resistance, and ease of welding and fabrication. Do not forge this Alloy C276 Netting Wire Mesh below 1700 Degree F (927 Degree C).

Hastelloy C276 Wire mesh Specifications

Specifications : ASTM / ASME B574 / SB574
Standard : ASTM, ASME
Size : 15NB to 150NB In
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.

Hastelloy C276 Wire Mesh Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
C276 0.010 max 1.00 max 0.08 max 0.03 max 2.50 max 50.99 min* 14.50 – 16.50 4.00 – 7.00 15.00 – 17.00 0.04 max

Alloy C276 Wire mesh Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C276 8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40 %

Equivalent Grades for C276 Hastelloy Wire mesh

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C276 2.4819 N10276 NW 0276 ХН65МВУ NiMo16Cr15W ЭП760

Alloy C276 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

C276 Hastelloy Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-01-15T19:21:51+05:30December 16th, 2021|

Hastelloy C22 Wire Mesh Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy C22 Wire Mesh, which can be welded by all common methods and are highly versatile. Displaying excellent resistance to stress corrosion cracking and non – oxidizing acids, Hastelloy C22 Hexagonal Wire Mesh have been used for numerous applications. Hastelloy C22 Welding Wire Mesh is the most versatile of the Alloys and is widely used for chemical process equipment applications due to their excellent resistance to non – oxidizing environments.

Hastelloy C22 Wire Mesh Manufacturer In India| Hastelloy C22 Wire Mesh Manufacturer In Mumbai| Hastelloy C22 Wire Mesh Exporter In India | Hastelloy C22 Wire Mesh Exporter In Mumbai | Hastelloy C22 Wire Mesh Supplier In India | Hastelloy C22 Wire Mesh Supplier In Mumbai | Hastelloy C22 Wire Mesh Stockist In India | Hastelloy C22 Wire Mesh Stockist In Mumbai

Water – base coolant should be premium quality for Hastelloy C22 Netting Wire Mesh, sulfochlorinated water soluble oil or chemical emulsion with extreme pressure additives. Water – base coolant of Hastelloy C22 Woven Wire Mesh may cause chipping and rapid failure of carbide tools in interrupted cuts. Hastelloy C22 Spring Steel Wire Mesh is an alloy that is precipitation harden able for high mechanical properties. Alloy C22 Hexagonal Wire Mesh maintains good strength and oxidation resistance at temperatures up to about 1300 Degree F (700 Degree C).

Hastelloy C22 Wire Mesh

Hastelloy C22 Wire Mesh

The high strength and excellent fabrication characteristics of Alloy C22 Welding Wire Mesh make it useful for various components of aircraft and industrial gas turbines. Alloy C22 Netting Wire Mesh has good resistance to corrosion and oxidation along with high tensile and creep-rupture properties at temperatures to 1300 Degree C. Applications of Alloy C22 Woven Wire Mesh include blades, vanes, shafts, tail cones, afterburners, springs, and fasteners.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy C22 Wire mesh Specifications
Specifications : ASTM / ASME B574 / SB574
Standard : ASTM, ASME
Size : 15NB to 150NB In
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy C22 Wire Mesh Chemical Composition
Grade C Mn Si S Co Ni Cr Fe Mo P
C22 0.010 max 0.50 max 0.08 max 0.02 max 2.50 max 50.015 min* 20.00 – 22.50 2.00 – 6.00 12.50 – 14.50 0.02 max
Alloy C22 Wire mesh Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C22 8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %
Equivalent Grades for C22 Hastelloy Wire mesh
STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C22 2.4602 N06022 NW 6022 NiCr21Mo14W
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Alloy C22 Wire Mesh Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
C22 Hastelloy Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy C22 Wire Mesh
Hastelloy C22 Wire Mesh 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy C22 Wire Mesh, which can be welded by all common methods and are highly versatile. Displaying excellent resistance to stress corrosion cracking and non – oxidizing acids, Hastelloy C22 Hexagonal Wire Mesh have been used for numerous applications.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-12-16T10:58:50+05:30December 16th, 2021|

Incoloy 825 Wire Mesh Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 825 Wire Mesh, which has good anti – oxidation and non – oxidizing heat acid performance. Incoloy 825 Hexagonal Wire Mesh is an Austenitic Nickel – Iron – Chromium Alloy Developed for Exceptional Corrosion Resistance in Both Oxidizing and Reducing Environments. Alloy 825 Welding Wire Mesh is used in chemical process equipment, acid production piping and vessels, pickling, etc.

Incoloy 825 Wire Mesh Manufacturer In India | Incoloy 825 Wire Mesh Manufacturer In Mumbai | Incoloy 825 Wire Mesh Exporter In India | Incoloy 825 Wire Mesh Exporter In Mumbai | Incoloy 825 Wire Mesh Supplier In India | Incoloy 825 Wire Mesh Supplier In Mumbai | Incoloy 825 Wire Mesh Stockist In India | Incoloy 825 Wire Mesh Stockist In Mumbai

Incoloy 825 Netting Wire Mesh is a nickel – iron – chromium alloy with titanium, molybdenum and copper, which has good mechanical properties from cryogenic temperatures to moderately high temperatures. Incoloy 825 Woven Wire Mesh has excellent resistance to both reducing and oxidizing acids, to stress – corrosion cracking, and to localized attack such as pitting and crevice corrosion. Incoloy 825 Spring Steel Wire Mesh has useful resistance to boiling sulfuric acid up to 40 % concentration, to 60 % concentration at 176 Degree F and in all concentrations to 150 Degree F.

Incoloy 825 Wire Mesh

Incoloy 825 Wire Mesh

Incoloy 825 Fencing Wire Mesh is even used as clad steel pipe – where resistance to stress cracking or general corrosion to a range of reducing or oxidizing acids is required. For long production runs if Alloy 825 Wires, the alloy tool steels, and high – speed steels give good results, especially if hard chromium plated to reduce galling. Alloy 825 Hexagonal Wire Mesh is also used in ammonium sulfate vessels, marine exhaust systems, expansion bellows, power station ash hoppers, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 825 Wire mesh Specifications
Specifications : ASTM / ASME B425 / SB425
Standard : ASTM / ASME
Size : 15NB to 150NB In
Length : UUPTO 1 METERS
Type : Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
825 Incoloy Wire Mesh Chemical Composition
Grade C Mn Si S Cu Fe Ni Cr Al Ti
825 0.05 max 1.00 max 0.5 max 0.03 max 1.50 – 3.00 22.00 min 38.00 – 46.00 19.50 – 23.50 0.02 max 0.06 – 1.20
Alloy 825 Wire mesh Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %
Equivalent Grades for 825 Incoloy Wire mesh
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo XH38BT
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Alloy 825 Wire Mesh Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Incoloy 825 Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 825 Wire Mesh
Incoloy 825 Wire Mesh Manufacturer 2

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 825 Wire Mesh, which has good anti – oxidation and non – oxidizing heat acid performance. Incoloy 825 Hexagonal Wire Mesh is an Austenitic Nickel – Iron – Chromium Alloy Developed for Exceptional Corrosion Resistance in Both Oxidizing and Reducing Environments.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-12-15T11:24:55+05:30December 15th, 2021|

Incoloy 800 Wire Mesh Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 800 Wire Mesh for valued clienteles. This Incoloy 800 Wire Mesh is used for the similar creep resistant uses, but the mutual effects of thermal and mechanical processing of the alloy allow superior design pressures to be combined than are allowable for the conventional alloy. Incoloy 800H Hexagonal Wire Mesh is an iron – nickel – chromium alloy and is part of the 800 series family of alloy. This Incoloy 800HT Welding Wire Mesh is a mixture of chromium and nickel alloy and is organized composition imitative of INCOLOY alloy products.

Incoloy 800 Wire Mesh Manufacturer In India | Incoloy 800 Wire Mesh Manufacturer In Mumbai | Incoloy 800 Wire Mesh Exporter In India | Incoloy 800 Wire Mesh Exporter In Mumbai | Incoloy 800 Wire Mesh Supplier In India | Incoloy 800 Wire Mesh Supplier In Mumbai | Incoloy 800 Wire Mesh Stockist In India | Incoloy 800 Wire Mesh Stockist In Mumbai

Incoloy 800 Netting Wire Mesh has outstanding resistance to oxidation and tensile strength plus carburization characteristics. Meanwhile, this Incoloy 800H Woven Wire Mesh is also being offered in different sizes and shapes to our customers. Incoloy 800HT Spring Steel Wire Mesh offers superior corrosion resistance in oxidizing corrosive environments such as nitric acid or nitric acid – sulfuric acid. This Alloy 800 Fencing Wire Mesh has High temperature strength and High creep rupture strength.

Incoloy 800 Wire Mesh

Incoloy 800 Wire Mesh

We knew the importance of maintaining the aluminum and titanium contents in the upper portion of the specified material range of Alloy 800 Wire Mesh, which resulted in higher creep and stress rupture properties. Typical applications for these Alloy 800H Wires include ethylene pyrolysis, cracking furnaces for vinyl chloride, hydrocarbon cracking, diphenol and acetic acid.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 800 / 800H / 800HT Wire mesh Specifications
Specifications : ASTM / ASME B 408 / SB 408
Standard : ASTM / ASME
Size : 15NB to 150NB In
Length : UUPTO 1 METERS
Type : Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
800 / 800H / 800HT Incoloy Wire Mesh Chemical Composition
Grade C Mn Si S Cu Fe Ni Cr Al Ti
800 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60ᴬ 0.15 – 0.60ᴬ
Alloy 800 / 800H / 800HT Wire mesh Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
800 / 800H / 800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %
Equivalent Grades for 800 / 800H / 800HT Incoloy Wire mesh
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21 XH32T
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Alloy 800 / 800H / 800HT Wire Mesh Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Incoloy 800 / 800H / 800HT Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 800 Wire Mesh
Incoloy 800 Wire Mesh 2

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 800 Wire Mesh for valued clienteles. This Incoloy 800 Wire Mesh is used for the similar creep resistant uses, but the mutual effects of thermal and mechanical processing of the alloy allow superior design pressures to be combined than are allowable for the conventional alloy

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-12-15T11:07:27+05:30December 15th, 2021|

Inconel 718 Wire Mesh Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Inconel 718 Wire Mesh to the customers. This Inconel 718 Wires is an oxidation and corrosion resistant nickel alloy which is used both for its soaring potency and exceptional aqueous corrosion resistance. The power of Inconel 718 Wire Mesh is mainly a solid solution effect from columbium and molybdenum. This Inconel 718 Hexagonal Wire Mesh is a promising select for sea water uses, and so is extremely resistant in an extensive collection of mineral and organic acids.

Alloy 718 Welding Wire Mesh (UNS N07718) resists an extensive collection of sternly corrosive atmospheres and is particularly resistant to crevice and pitting corrosion. Meanwhile, this Inconel 718 Netting Wire Mesh is also being offered in different sizes and shapes to our customers.

Inconel 718 Wire Mesh

   Inconel 718 Wire Mesh

Alloy 718 Woven Wire Mesh achieves high-strength levels from the solid solution effects of Molybdenum and Niobium (Columbium) from room temperature up to 800 Degree C. For high temperature applications above 600 Degree C (1112 Degree F), this solution annealed Inconel 718 Spring Steel Wire Mesh is generally used. There is almost no attack in mild environments of Inconel 718 Fencing Wire Mesh such as fresh and sea water, alkaline media and neutral pH environment. This leads to the ability to recover creep properties of this Alloy 718 Wire Mesh to prolong the materials lifetime.

Inconel 718 Wire mesh Specifications

Specifications : ASTM / ASME B 637 / SB 637
Standard : ASTM / ASME
Size : 15NB to 150NB In
Length : UUPTO 1 METERS
Type : Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.

718 Inconel Wire Mesh Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Inconel 718 0.08 max 0.35 max 0.35 max 0.015max 0.30 max 50.00 – 55.00 17.00 – 21.00

Alloy 718 Wire mesh Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 718 8.2 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482 45 %

Equivalent Grades for 718 Inconel Wire mesh

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 718 2.4668 N07718

Alloy 718 Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Inconel 718 Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-10-03T16:43:59+05:30December 14th, 2021|

Inconel 625 Wire Mesh Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Inconel 625 Wire Mesh to the customers. This Inconel 625 Wires is an oxidation and corrosion resistant nickel alloy which is used both for its soaring potency and exceptional aqueous corrosion resistance. The power of Inconel 625 Wire Mesh is mainly a solid solution effect from columbium and molybdenum. This Inconel 625 Hexagonal Wire Mesh is a promising select for sea water uses, and so is extremely resistant in an extensive collection of mineral and organic acids.

Inconel 625 Wire Mesh Manufacturer In India | Inconel 625 Wire Mesh Manufacturer In Mumbai | Inconel 625 Wire Mesh Exporter In India | Inconel 625 Wire Mesh Exporter In Mumbai | Inconel 625 Wire Mesh Supplier In India | Inconel 625 Wire Mesh Supplier In Mumbai | Inconel 625 Wire Mesh Stockist In India | Inconel 625 Wire Mesh Stockist In Mumbai

Alloy 625 Welding Wire Mesh (UNS N06625) resists an extensive collection of sternly corrosive atmospheres and is particularly resistant to crevice and pitting corrosion. Meanwhile, this Inconel 625 Netting Wire Mesh is also being offered in different sizes and shapes to our customers. Alloy 625 Woven Wire Mesh achieves high-strength levels from the solid solution effects of Molybdenum and Niobium (Columbium) from room temperature up to 800 Degree C.

Inconel 625 Wire Mesh

Inconel 625 Wire Mesh

For high temperature applications above 600 Degree C (1112 Degree F), this solution annealed Inconel 625 Spring Steel Wire Mesh is generally used. There is almost no attack in mild environments of Inconel 625 Fencing Wire Mesh such as fresh and sea water, alkaline media and neutral pH environment. This leads to the ability to recover creep properties of this Alloy 625 Wire Mesh to prolong the materials lifetime.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel 625 Wire mesh Specifications
Specifications : ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472
Standard : ASTM / ASME
Size : M10 TO M100
Length : UUPTO 1 METERS
Type : Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
625 Inconel Wire Mesh Chemical Composition
Grade C Mn Si S Cu Fe Ni Cr
Inconel 625
0.10max 0.50 max 0.50 max 0.015max 5.0 max 58.0 min 20.0 – 23.0
Alloy 625 Wire mesh Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 625
8.4 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 517 42.5 %
Equivalent Grades for 625 Inconel Wire mesh
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 625
2.4856 N06625 NCF 625 NA 21 ХН75МБТЮ NC22DNB4M NiCr22Mo9Nb
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Alloy 625 Wire Mesh Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Inconel 625 Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel 625 Wire Mesh
Inconel 625 Wire Mesh 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Inconel 625 Wire Mesh to the customers. This Inconel 625 Wires is an oxidation and corrosion resistant nickel alloy which is used both for its soaring potency and exceptional aqueous corrosion resistance.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-12-14T13:58:35+05:30December 14th, 2021|

Inconel 601 Wire Mesh Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Inconel 601 Wire Mesh to the customers. Inconel 601 Wires has excellent soaring temperature power, which is used for applications that need resistance to heat and corrosion. Machining actions in this Inconel 601 Wire Mesh are carried out using commercial coolants. Inconel 601 Hexagonal Wire Mesh is general – purpose chromium – iron – nickel alloy and has elevated mechanical features at high temperatures. This Inconel 601 Welding Wire Mesh is often used for industrial furnaces, and as well for heat – treating machinery such as muffles, retorts and baskets.

Inconel 601 Wire Mesh Manufacturer In India | Inconel 601 Wire Mesh Manufacturer In Mumbai | Inconel 601 Wire Mesh Exporter In India| Inconel 601 Wire Mesh Exporter In Mumbai | Inconel 601 Wire Mesh Supplier In India | Inconel 601 Wire Mesh Supplier In Mumbai | Inconel 601 Wire Mesh Stockist In India| Inconel 601 Wire Mesh Stockist In Mumbai 

Inconel 601 Netting Wire Mesh (UNS N06601) improves a strongly adherent oxide scale that resists spalling even under strict thermal cycling. An outstanding characteristic of this Alloy 601 Spring Steel Wire Mesh is its resistance to high – temperature oxidation. The aluminum content gives Inconel 601 Fencing Wire Mesh excellent resistance to high temperature oxidation.

Inconel 601 Wire Mesh

Inconel 601 Wire Mesh

This Alloy 601 Wire Mesh is a Nickel based alloy with a high Chromium content with an addition of Aluminum, which is designed to resist high temperature oxidizing atmospheres in the heat treatment of metals and materials. Alloy 601 Hexagonal Wire Mesh can be used in a variety of applications, such as copper brazing, sintering and annealing. Meanwhile, this Inconel 601 Woven Wire Mesh is also being offered in different sizes and shapes to our customers.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel 601 Wire mesh Specifications
Specifications : ASTM / ASME B 166, SB 166
Standard : ASTM / ASME
Size : 15NB to 150NB In
Length : UUPTO 1 METERS
Type : Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
601 Inconel Wire Mesh Chemical Composition
Grade C Mn Si S Cu Fe Ni Cr
Inconel 601 0.10 max 1.00 max 0.50 max 0.015max 1.00 max Balance 58.0 – 63.0 21.0 – 25.0
Alloy 601 Wire mesh Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 601 8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %
Equivalent Grades for 601 Inconel Wire mesh
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Alloy 601 Wire Mesh Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Inconel 601 Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel 601 Wire Mesh
Inconel 601 Wire Mesh 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Inconel 601 Wire Mesh to the customers. Inconel 601 Wires has excellent soaring temperature power, which is used for applications that need resistance to heat and corrosion. Machining actions in this Inconel 601 Wire Mesh are carried out using commercial coolants.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-12-11T13:01:31+05:30December 11th, 2021|

Inconel 600 Wire Mesh Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the leading Manufacture and Exporter Of High Quality Inconel 600 Wire Mesh, where it is widely demanded among the clienteles because of its different uses. Inconel 600 Wire Mesh is as well a nickel – chromium alloy by means of first – rate oxidation resistance at soaring temperatures. Alloy 600 Hexagonal Wire Mesh is a nickel – base alloy by means of outstanding carburization and has outstanding cold and hot workability. Inconel 600 Welding Wire Mesh is willingly weldable and used in a number of corrosion resisting uses.

Inconel 600 Wire Mesh Manufacturer In India| Inconel 600 Wire Mesh Manufacturer In Mumbai| Inconel 600 Wire Mesh Exporter In India | Inconel 600 Wire Mesh Exporter In Mumbai| Inconel 600 Wire Mesh Supplier In India | Inconel 600 Wire Mesh Supplier In Mumbai | Inconel 600 Wire Mesh Stockist In India | Inconel 600 Wire Mesh Stockist In Mumbai

Inconel 600 Netting Wire Mesh is non – magnetic and holds an outstanding combination of soaring potency. Inconel 600 Woven Wire Mesh (UNS N06600) was considered for service temp from cryogenic to high temperatures in the array of 2000 Degree F. Alloy 600 Fencing Wire Mesh is often used in heaters, chemical process equipment, heat exchangers, heat treat furnace fixtures and components, and gas turbine components. Alloy 600 Wire Mesh also has excellent mechanical properties and has a desirable combination of high strength and good workability.

Inconel 600 Wire Mesh

Inconel 600 Wire Mesh

We offer Alloy 600 Hexagonal Wire Mesh in a range of gauges to meet any application or performance requirements. Alloy 600 Welding Wire Mesh can be defined as the perfect combination of high strength and good weld ability along with excellent mechanical properties. Meanwhile, this Inconel 600 Spring Steel Wire Mesh is also being offered in different sizes and shapes to our customers.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel 600 Wire mesh Specifications
Specifications : ASTM / ASME B 166, SB 166
Standard : ASTM / ASME
Size : M10 TO M100
Length : UUPTO 1 METERS
Type : Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
600 Inconel Wire Mesh Chemical Composition
Grade C Mn Si Fe S Cr Cu Ni
600 min. 6.0 14.0 72.0
max. 0.15 1.0 0.5 10.0 0.015 17.0 0.5
Alloy 600 Wire mesh Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
600 Psi – 95,000 , MPa -655 Psi – 45,000 , MPa – 310 40
Equivalent Grades for 600 Inconel Wire mesh
Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 600 N06600 NA 13 NiCr15Fe 2.4816 NC15FE11M МНЖМц 28-2,5-1,5 NCF 600
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Alloy 600 Wire Mesh Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
600 Inconel Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Inconel 600 Wire Mesh
Inconel 600 Wire Mesh 1

Sachiya Steel International is one of the leading Manufacture and Exporter Of High Quality Inconel 600 Wire Mesh, where it is widely demanded among the clienteles because of its different uses. Inconel 600 Wire Mesh is as well a nickel – chromium alloy by means of first – rate oxidation resistance at soaring temperatures.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-12-11T12:35:06+05:30December 11th, 2021|

Stainless Steel 904L Wire Mesh Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 904L Wire Mesh, which is a harden able high – carbon chromium steel. When put under heat treatment, Stainless Steel 904L Hexagonal Wire Mesh attains the highest hardness levels of any grade of stainless steel. Resistance to sulphuric acid is particularly exceptional, but Stainless Steel 904L Welding Wire Mesh shows useful resistance in phosphoric acid, nitric acid as well as in chloride environments. SS 904L Netting Wire Mesh has good mechanical properties at both ambient and elevated temperatures, up to approximately 930 Degree F (500 Degree C) and is readily fabricated by usual industrial processes.

Stainless Steel 904L Woven Wire Mesh is composed of carbon, chromium, copper, iron, manganese, molybdenum, nickel, phosphorous, silicon, and Sulphur. Application of SS 904L Spring Steel Wire Mesh could result in real cost savings when carefully compared to higher – cost alloys to determine if the necessary resistance is obtained in the chosen media. Post weld heat treatment of SS 904L Fencing Wire Mesh may not be required for use in some corrosive environments due to resistance to inter – granular corrosion in the as-welded condition.

Stainless Steel 904L Wire Mesh

We use a range of transport partners to ship overnight these 904L Stainless Steel Wire Mesh within foreign countries, and offer a full range of logistics solutions from priority express services to more cost – effective economy shipments all around the globe.

SS 904L Wire mesh Specifications

Specifications : ASTM A 164 ASME SA 164
Standard : ASTM, ASME International Standards
Length : 30m to 100″
Width : 1m to 48″
Type : Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.

904L Stainless Steel Wire Mesh Chemical Composition

Grade C Mn Si P S Cr MO Ni Cu
904L min. 19.0 4.0-5.0 23.0 1.0
max. 0.20 2.0 1.0 0.045 0.035 23.0 28.0 2.0

Stainless Steel 904L Wire mesh Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
446 490 220 35 70-90 typical

Equivalent Grades for 904L Stainless Steel Wire mesh

STANDARD WERKSTOFF NR. UNS JIS BS KS AFNOR EN
SS 904L 1.4539 N08904 SUS 904L 904S13 STS 317J5L Z2 NCDU 25-20 X1NiCrMoCu25-20-5

SS 904L Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

904L Steel Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-21T11:57:16+05:30December 10th, 2021|
Go to Top