will 5083 Aluminium rust

Aluminium Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Aluminium Screw, which is not usually used at temperatures exceeding 800 Degree F (427 Degree C) due to quick hardening and loss of corrosion resistance. When given a high temperature final solution anneal, Aluminium 6061 Hex Head Screws exhibits dramatic creep resistance. The dual stabilization prevents carbide sensitization during welding and high temperature exposure, and makes Aluminium 6082 Socket Head Cap Screws non harden able by heat treatment. A major difference in Aluminium 5083 Socket Set Screws can be attributed to the alloy addition to control hardening which results in the need for higher heat input to achieve penetration during arc welding.

Aluminium Screw

In some of the industry sectors, Aluminium 5086 Anchors Screws can be used in include Marine Industry and Shipbuilding, Oil and Gas Industry, Power Industry and Desalination plants among others. All surfaces of Aluminium 5052 Blind Rivet Screws must be ground or polished to remove any traces of oxide and surface decarburization. The parts of Aluminium 6063 Concrete Screws should then be generally considered to be weldable by the common fusion and resistance techniques.

Aluminium 7075 Threaded Screws exhibits good corrosion resistance to atmospheric corrosion, potable water, and to mildly corrosive chemical environments because of its ability to form a tightly adherent oxide film which protects their surfaces from further attack. These Aluminium 1100 Steel Shoulder Screws has exceptional resistance to a wide variety of chemical environments.

Aluminium 6061, 6082, 5083, 5086, 5052 ,6063, 7075, 1100 Screw Specifications

Specifications : ASTM B 211 ASME SB 211
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

Aluminium Screw Chemical Composition

Grade Si Fe Cu Zn Mn Mg Ti Cr Al Others(Total)
Aluminium 0.40 – 0.80 0.70 max 0.15-0.40 0.25 max 0.15 0.8-1.2 0.15 max 0.04-0.35 Balance 0.15 max

Mechanical Properties for Aluminium Screw

Temper Tensile Hardness
Ultimate Yield Elongation Brinell
KSI MPA KSI MPA %
T6, T651 45 310 21 145 25 65

Physical Property for 6082 Aluminium Screw

Physical Property Value
Density 2,70 g/cm³
Melting Point 582 °C
Thermal Expansion 23.4 x 10^-6 /K
Modulus of Elasticity 69 GPa
Thermal Conductivity 170 W/m.K
Electrical Resistivity %43 IACS

Aluminium 6061, 6082, 5083, 5086, 5052 ,6063, 7075, 1100 Screw Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

6061, 6082, 5083, 5086, 5052 ,6063, 7075, 1100 Aluminium Screw Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-03T12:01:58+05:30March 17th, 2022|Screw|

Aluminum Pipe Manufacturer In India 

Aluminum Pipe Manufacturer In India 

Sachiya Steel International offers a wide range of aluminum pipe that helps prevent the peeling of the protective layer. These 6061 aluminum seamless tubes are a great option when there is a problem of corrosion cracking under the influence of chloride, which is resistant to pitting and crevice corrosion. Our 6082 aluminum welded pipes are also used for processing pharmaceuticals, food, gasoline, solvents, plastics, explosives, synthetic fibers, and many other products.

Sachiya Steel International is the manufacturer of these 5083 EFW aluminum pipes, where we also serve many industries. The zone of our 5086 aluminum ERW aluminum pipes quickly forms when exposed to high temperatures until it reaches a thickness of 0.001 to 0.002 inches. The oxide zone of these 5052 aluminum round tubes provides the proper diffusion conditions to form a protective layer of chromium oxide on the metal surface.

 

aluminum Pipe

Sachiya Steel International is one of the prominent suppliers and dealers of our 6063 aluminum square pipes , which also retain good strength and toughness at cryogenic temperatures. These 7075 aluminum rectangular pipe maintain nearly constant dimensions in the normal atmospheric temperature range and have a low coefficient of expansion from cryogenic temperatures to about 500 degrees Fahrenheit. Our 11000 aluminum electro-polished pipes can be hot and cold formed and processed using processes similar to austenitic stainless steels. These 6061 aluminum hexagonal pipes are welded using filler metal, which is available as bare wire for GTAW and GMAW processes.

Aluminum Pipes Specification

Standard : ASTM / ASME SB 221
Size : 8 (1-1/2″ / 1.900″)
Outer Diameter : 1″ through 16″
Thickness : Schedule 40
Grade : 2024, 5083, 5086, 6061, 6063, 7075
Type : Seamless / ERW / Welded / Fabricated / LSAW Pipes
Form : Round, Square, Rectangular, Hydraulic Etc.
End : Plain End, Beveled End, Treaded
Length : Single Random, Double Random & Cut Length

Aluminium Pipe Fittings Production Range

Grades 6063, 6061T6/T651, 6082 T6/T651, 5052, 5083, 5086, 7075, 1100, 2014, 2024
Type  Seamless
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Range ½”NB to 48″NB in Sch 10s, 40s, 80s, 160s, XXS, Other Custom Sizes
Dimensions
ANSI/ASME B16.9, B16.28, MSS-SP-43

 

Aluminium Pipes Sizes (In mm)

  7×5 14×12 25×19 38×32 50×44 85×75
   8×6 19×17 32×28.5 45×25 51×25 101×91
  10×8 22×19 38×34 50×46 76×70 115×97
12.5×10 25×22 38×34 50×46 76×57 160×140

Aluminium Pipes Chemical Composition

Si Fe Cu Zn Mn Mg Ti Cr Al Others(Total)
0.40 – 0.80 0.70 max 0.15-0.40 0.25 max 0.15 0.8-1.2 0.15 max 0.04-0.35 Balance
0.15 max

Mechanical Properties for Aluminium Pipe

Temper Tensile Hardness
Ultimate Yield Elongation Brinell
KSI MPA KSI MPA %
T6, T651 45 310 21 145 25
65

Aluminium Pipe Packaging

Stainless Steel Pipe Packed 2 steel bar packing

aluminum steel pipes may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of Alloy 20 Seamless Pipe may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.

Aluminium Pipe Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Aluminium Pipe Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance with EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRITE CONTENT as per norms if requested by clients.

  • EN 10204/3.1B
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flattening Test
  • Micro and Macro Test
  • Pitting Resistance Test
  • Flaring Test
  • Intergranular Corrosion (IGC) Test

Documentation

  • Commercial Invoice which includes HS Code
  • Packing List including net weight and gross weight, number of boxes, Marks and Numbers
  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Fumigation Certificates
  • Raw Material Test Reports
  • Material Traceability Records
  • Quality Assurance Plan (QAP)
  • Heat Treatment Charts
  • Certificates certifying NACE MR0103, NACE MR0175
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Guarantee Letter
  • NABL approved Laboratory Test Reports
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • Form A for the purposes of the Generalized System of Preferences (GSP)

Country’s We Export

Venezuela, Iraq, United Kingdom, Russia, United Arab Emirates, Croatia, Indonesia, Oman, Kazakhstan, Israel, Kenya, Iran, Bahrain, Bhutan, Colombia, Serbia, Pakistan, Czech Republic, Turkey, Ukraine, Poland, Bulgaria, France, Chile, Slovakia, Belgium, Iran, Ireland, Qatar, Sri Lanka, Sweden, Brazil, Bolivia, Taiwan, Jordan, South Africa, Switzerland, Tibet, Norway, India, Ghana, Costa Rica, Hungary, New Zealand, Vietnam, Ecuador, Afghanistan, Algeria, Peru, Netherlands, Argentina, Austria, Malaysia, Thailand, Portugal, Zimbabwe, Mongolia, Lebanon, Trinidad & Tobago, Tunisia, Mexico, Greece, Angola, Hong Kong, Denmark, Nepal, Finland, Chile, Poland, Yemen, Nigeria, Italy, Bangladesh, Australia, Macau, Azerbaijan, Saudi Arabia, Japan, Gabon, Philippines, Singapore, United States, Namibia, Romania, South Korea, Germany, Puerto Rico, Estonia, Morocco, Belarus, Nigeria, Mexico, Spain, China, Canada, Libya, Lithuania, Kuwait, Gambia, Egypt.

By |2024-03-11T15:45:53+05:30December 27th, 2019|Pipes|
Go to Top