stainless steel wire mesh price list india

Stainless Steel 310H Wire Mesh Manufacturers In India

Stainless Steel 310H Wire Mesh Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 310H Wire Mesh, which Good resistance to mildly corrosive atmospheres, but significantly less than Grade 310H due to the Sulphur addition; the sulphide inclusions act as pit initiation sites.  Grade 310 should not be exposed to marine or other similar environments, as these will result in rapid pitting corrosion. Because the sulphide inclusions in 310 are primarily aligned along the rolling direction the corrosion resistance is particularly reduced in cross-sections.

Stainless Steel 310H Wire Mesh

It is like other common austenitic stainless steels, is subject to stress corrosion cracking in chloride containing environments above about 50°C. Good oxidation resistance in intermittent service to 760°C and in continuous service to 870°C. Not generally recommended but, if unavoidable use Grade 308L or 309 electrodes. AS 1554.6 does not pre-qualify welding of 303.  Welds must be annealed for maximum corrosion resistance, but even then poor mechanical and corrosion properties will result. For ultra-high machining rates there are also available special grade variants such as Ugima 303UX. This includes copper to reduce the work hardening rate, in addition to the usual high Sulphur and Improved Machinability steel making practices.

Nuts and bolts. Bushings. Shafts. Electrical switchgear components. Gears. In general any component that is heavily machined and where the corrosion resistance and fabrication properties of 310H are viable. Grade 310H (UNS S31009) has a carbon content restricted to exclude the lower end of the 310 range, so is the grade of choice for high temperature applications.

SS 310H Wire mesh Specifications

Specifications : ASTM A 164 ASME SA 164
Standard : DIN, ASTM, BS and all International Standards
Length : 30m to 100″
Width : 1m to 48″
Type : Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.

310H Stainless Steel Wire Mesh Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 310H 0.04 – 0.10 2 max 1.00 max 0.045 max 0.030 max 24.00 – 26.00 19.00 – 21.00 53.885 min

Stainless Steel 310H Wire mesh Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40%

Equivalent Grades for 310H Stainless Steel Wire mesh

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310H S31009

SS 310H Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

310H Steel Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-23T13:20:03+05:30December 3rd, 2021|

Stainless Steel 310 Wire Mesh Manufacturers In India

Stainless Steel 310 Wire Mesh Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 310 Wire Mesh, which contain 16 percent to 26 percent chromium and up to 35 percent nickel, which, like manganese, is a strong austenite. SS 310 Hexagonal Wire Mesh has characteristics from an invisible, self – healing chromium oxide film that forms when chromium is added at concentrations greater than 10.5 percent. The best corrosion resistance is obtained in this austenitic Stainless Steel 310S Welding Wire Mesh, where their microstructures consist of very clean crystals in which all alloying elements are held in solid solution.

Stainless Steel 310 Wire Mesh

Austenitic SS 310 Netting Wire Mesh cannot be hardened by heat treatment; they are also nonmagnetic. The ferritic and martensitic Stainless Steel 310S Woven Wire Mesh both have an excellent microstructure, where the latter has a higher carbon level and can be hardened and is used for knives and tools. Stainless Steel 310 Spring Steel Wire Mesh contain only up to 0.12 percent carbon, which also have chromium as their main alloy addition and practically no nickel.

Corrosion resistance of this Stainless Steel 310S Fencing Wire Mesh is modest, and they are ferromagnetic. SS 310 Wire Mesh is employed at high temperatures — e.g., 800 Degree C (1,450 Degree F). Solution hardening of this Stainless Steel 310S Wire Mesh is used in this group to keep the steels strong at such heat.

Stainless Steel 310 Wire Mesh Specifications

Specifications : ASTM A 164 ASME SA 164
Standard : ASTM, ASME International Standards
Length : 30m to 100″
Width : 1m to 48″
Type : Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.

310/310S Stainless Steel Wire Mesh Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 310 0.015 max 2 max 0.015 max 0.020 max 0.015 max 24.00 – 26.00 0.10 max 19.00 – 21.00 54.7 min
SS 310S 0.08 max 2 max 1.00 max 0.045 max 0.030 max 24.00 – 26.00 0.75 max 19.00 – 21.00 53.095 min

Stainless Steel 310S Wire mesh Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %

Equivalent Grades for 310S Stainless Steel Wire mesh

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 X15CrNi25-20
SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18 X8CrNi25-21

SS 310/310S Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

310/310S Steel Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-03-27T11:54:06+05:30December 3rd, 2021|

Stainless Steel 304H Wire Mesh Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 304H Wire Mesh, which contains niobium for stabilization against sensitization and resultant inter – granular corrosion. SS 304H Hexagonal Wire Mesh is a nickel – iron – chromium austenitic alloy that was developed for maximum resistance to acid attack, specifically sulphuric acid. SS 304H Welding Wire Mesh has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulphuric, phosphoric, and nitric acids.

Stainless Steel 304H Wire Mesh Manufacturer In India | Stainless Steel 304H Wire Mesh Manufacturer In Mumbai | Stainless Steel 304H Wire Mesh Exporter In India | Stainless Steel 304H Wire Mesh Exporter In Mumbai | Stainless Steel 304H Wire Mesh Supplier In India | Stainless Steel 304H Wire Mesh Supplier In Mumbai | Stainless Steel 304H Wire Mesh Stockist In India | Stainless Steel 304H Wire Mesh Stockist In Mumbai
Stainless Steel 304H Wire Mesh

Stainless Steel 304H Wire Mesh

Although originally designed for use in sulphuric acid related industries, Stainless Steel 304H Netting Wire Mesh is now a popular choice for a wide variety of industries including the chemical, food, pharmaceutical, and plastics industries. In addition, Stainless Steel 304H Woven Wire Mesh is used in heat exchangers, mixing tanks, metal cleaning and pickling equipment, and piping. Stainless Steel 304H Spring Steel Wire Mesh is great for corrosion resistance, which further appears to fall between both the stainless and nickel categories as it contains characteristics of both.

SS 304H Fencing Wire Mesh is often chosen to solve stress corrosion cracking problems, which may occur with other alloys. Our SS 304H Wire Mesh was designed for maximum resistance to acid attack and demonstrates superior resistance to stress – corrosion cracking in boiling 2 0% to 40 % sulphuric acid, and also has excellent general corrosion resistance to sulphuric acid and to chloride stress corrosion cracking.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
SS 304H Wire mesh Specifications
Specifications : ASTM A 164 ASME SA 164
Standard : DIN, ASTM, BS and all International Standards
Length : 30m to 100″
Width : 1m to 48″
Type : Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
304H Stainless Steel Wire Mesh Chemical Composition
Grade C Mn Si P S Cr Mo Ni N
304H min. 0.04 18.0 8.0
max. 0.010 2.0 0.75 0.045 0.030 20.0 10.5
Stainless Steel 304H Wire mesh Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304H 515 205 40 92 201
Equivalent Grades for 304H Stainless Steel Wire mesh
Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304H S30409 1.4301
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
SS 304H Wire Mesh Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
304H Steel Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Stainless Steel 304H Wire Mesh
Stainless Steel 304H Wire Mesh

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 304H Wire Mesh, which contains niobium for stabilization against sensitization and resultant inter – granular corrosion. SS 304H Hexagonal Wire Mesh is a nickel – iron – chromium austenitic alloy that was developed for maximum resistance to acid attack, specifically sulphuric acid.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-11-27T12:25:21+05:30November 27th, 2021|

Stainless Steel 304L Wire Mesh Manufacturers In India

Stainless Steel 304L Wire Mesh Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 304L Wire Mesh, which are used as they are not sensitive to inter – granular corrosion after heating within the carbide precipitation range of 425 Degree C – 850 Degree C. Our Stainless Steel 304L Hexagonal Wire Mesh is the grade of choice for applications in the temperature range of up to about 900 Degree C, combining high strength, resistance to scaling and phase stability by means of resistance to subsequent aqueous corrosion.

Stainless Steel 304L Wire Mesh

A limitation with this SS 304L Welding Wire Mesh is that titanium does not transfer well across a high temperature arc, so is not recommended as a welding consumable. Our Stainless Steel 304L Netting Wire Mesh is stabilized in contradiction of chromium carbide formation by the addition of titanium.

These Stainless Steel 304L Woven Wire Mesh is heat resistant, titanium stabilized, austenitic alloy that’s commonly used for service in the 1000 Degree F – 1600 Degree F temperature range. Our SS 304L Spring Steel Wire Mesh is primarily used in applications that involve continuous and intermittent service temperatures within the carbide precipitation range of 800 Degree F – 1500 Degree F.  These SS 304L Fencing Wire Mesh was developed for use in the chromium carbide precipitation range of 1800 Degree F – 1500 Degree F (427 Degree C – 816 Degree C) where un – stabilized alloys are subject to inter – granular attack.

Stainless Steel 304L Wire Mesh Specifications

Specifications : ASTM A 164 ASME SA 164
Standard : DIN, ASTM, BS and all International Standards
Length : 30m to 100″
Width : 1m to 48″
Type : Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.

304L Stainless Steel Wire Mesh Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
304L min. 18.0 8.0
max. 0.03 2.0 1.00 0.045 0.03 20.0 12.0

Stainless Steel 304L Wire mesh Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304L 485 170 40 92 201

Equivalent Grades for 304L Stainless Steel Wire mesh

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304L S30403 304S11 58E 1.4301 X5CrNi18-10 2332 SUS 304L

SS 304L Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

304L Steel Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-03-27T18:34:42+05:30November 27th, 2021|

Stainless Steel 304 Wire Mesh Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 304 Wire Mesh, which allows being matched for corrosion resistance with the austenitic and ferritic steel grades. Stainless Steel 304 Hexagonal Wire Mesh is always important to assess the suitability of a particular with full knowledge of the corrosive environment. Structures of SS 304 Welding Wire Mesh in swimming pools are known to be prone to SCC. The use of standard austenitic SS 304 Netting Wire Mesh is forbidden in several applications. The advantage of high-strength Stainless Steel 304 Woven Wire Mesh immediately becomes a disadvantage when considering formability and machinability.

Stainless Steel 304 Wire Mesh Manufacturer In India | Stainless Steel 304 Wire Mesh Manufacturer In Mumbai | Stainless Steel 304 Wire Mesh Exporter In India| Stainless Steel 304 Wire Mesh Exporter In Mumbai | Stainless Steel 304 Wire Mesh Supplier In India | Stainless Steel 304 Wire Mesh Supplier In Mumbai | Stainless Steel 304 Wire Mesh Stockist In India | Stainless Steel 304 Wire Mesh Stockist In Mumbai 
Stainless Steel 304 Wire Mesh

Stainless Steel 304 Wire Mesh

The high strength of Spring Steel Wire Mesh also comes with lower ductility than austenitic grades. Due to their high chromium content, Fencing Wire Mesh offers excellent corrosion resistance in many media. SS 304 Wire Mesh has very limited use in hydrochloric acid because of the risk of uniform and localized corrosion. High–alloyed steels such as 304 SS Wire Mesh can be used in dilute hydrochloric acid.

The resistance to pitting and crevice corrosion of Hexagonal Wire Mesh increases with the content of chromium, molybdenum and nitrogen in the steel. However, Welding Wire Mesh is convenient to use the Pitting Resistance Equivalent Number to rank the grades, where there is no single measure of corrosion resistance.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
SS 304 Wire mesh Specifications
Specifications : ASTM A 164 ASME SA 164
Standard : DIN, ASTM, BS and all International Standards
Length : 30m to 100″
Width : 1m to 48″
Type : Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
304 Stainless Steel Wire Mesh Chemical Composition
Grade C Mn Si P S Cr Mo Ni N
304 min. 18.0 8.0
max. 0.08 2.0 0.75 0.045 0.030 20.0 10.5 0.10
Stainless Steel 304 Wire mesh Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304 515 205 40 92 201
Equivalent Grades for 304 Stainless Steel Wire mesh
Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304 S30400 304S31 58E 1.4301 X5CrNi18-10 2332 SUS 304
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
SS 304 Wire Mesh Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
304 Steel Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Stainless Steel 304 Wire Mesh
Stainless Steel 304 Wire Mesh 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 304 Wire Mesh, which allows being matched for corrosion resistance with the austenitic and ferritic steel grades. Stainless Steel 304 Hexagonal Wire Mesh is always important to assess the suitability of a particular with full knowledge of the corrosive environment.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-11-26T12:07:28+05:30November 26th, 2021|
Go to Top