Sachiya Steel International

Stainless Steel Nipple Price List

Stainless Steel 310 Nipple Manufacturers In India

Stainless Steel 310 Nipple Manufacturers In India

Sachiya Steel International is one of the well-established distributors for high quality Stainless Steel 310 Nipple, which is made to gone through various quality checks and is trimmed at edges. The rolling mill technology was the only technique used to manufacture Stainless Steel 310 Hexagon Reducing Nipple for industrial purpose. The rolled strips of SS 310S Hexagon Nipple were formed into a circular cross section with the help of funnel rolls.

The lap welding was then done on Stainless Steel 310 One End Threaded Nipple through the forge welding process. Stainless Steel 310S Both End Threaded Nipple is manufactured with continuous tube mill using multi – torch tungsten Inert gas. The filler metal or forge welding process is not used in Stainless Steel 310 Concentric Swaged Nipple, which are then fed to the tubes mill by us.

Stainless Steel 310S Eccentric Swaged Nipple is passed through the number of rollers as per the required size. In the tubes-mill, this Stainless Steel 310 Nipple is gradually converted into the tubular shape. The fitted welding machine is then used to weld trim edges of SS 310S Nipple using TIG welding process. The scraps and inside weld bead of 310 Stainless Steel Nipple are removed instantaneously by the machine. 310S Stainless Steel Nipple is cut to the required lengths depending upon the industrial demand, which is then subjected to cleaning to remove the dirt.

Stainless Steel 310 Nipple 
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 310/310S Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 310 0.015 max 2 max 0.015 max 0.020 max 0.015 max 24.00 – 26.00 0.10 max 19.00 – 21.00 54.7 min
SS 310S 0.08 max 2 max 1.00 max 0.045 max 0.030 max 24.00 – 26.00 0.75 max 19.00 – 21.00 53.095 min

Stainless Steel 310/310S Nipple Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %

Equivalent Grades for 310/310S Stainless Steel Nipple

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 – X15CrNi25-20
SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18 – X8CrNi25-21

Stainless Steel 310 Nipple

Stainless Steel 310/310S Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 310/310S Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-03-27T18:10:03+05:30April 7th, 2021|

Stainless Steel 304H Nipple Manufactures In India

Stainless Steel 304H Nipple Manufactures In India

Sachiya Steel International is one of the reputed exporter & supplier of Stainless Steel 304H Nipple, which has carbon content and is a preferred choice for high temperature applications. Stainless Steel 304H Hexagon Reducing Nipple has good resistance to oxidation at temperatures of up to 1040 Degree C (1904 Degree F) in intermittent service and 1150 Degree C (2102 Degree F) in continuous service.

Stainless Steel 304H Hexagon Nipple is widely used in environments where Sulphur dioxide gas is present at high temperatures. However SS 304H One End Threaded Nipple is recommended that this steel should not be continuously used at 425 Degree C – 860 Degree C (797 Degree F – 1580 Degree F) range due to carbide precipitation. Stainless Steel 304H Both End Threaded Nipple does not perform in reducing, nitriding or carburizing atmospheres, but it does outperform most heat resistant stainless steels in these conditions.

Stainless Steel 304H Nipple

Stainless Steel 304H Concentric Swaged Nipple is prone to inter – granular corrosion after long term exposure at high temperatures. However, due to its high chromium content, Stainless Steel 304H Eccentric Swaged Nipple is more corrosion resistant than most heat resistant alloys. 304H Stainless Steel Nipple is quite ductile and forms in a manner very similar to 316, where good characteristics suited to all standard methods and generally recommended for fusion welding. When heated between 1202 Degree F – 1742 Degree F (650 Degree C – 950 Degree C), Grade 304H Nipple is subject to sigma phase precipitation.

Stainless Steel 304H Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 304H Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
304H min. 0.04 – – – – 18.0 – 8.0 –
max. 0.010 2.0 0.75 0.045 0.030 20.0 10.5 –

Stainless Steel 304H Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304H 515 205 40 92 201

Equivalent Grades for 304H Stainless Steel Nipple

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304H S30409 – – 1.4301 – – –

Stainless Steel 304H Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 304H Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-06T15:32:58+05:30April 7th, 2021|

Stainless Steel 304L Nipple Manufactures In India

Stainless Steel 304L Nipple Manufactures In India

Sachiya Steel International is one of the pioneer supplier and trader of Stainless Steel 304L Nipple, which are used because they are not sensitive to inter – granular corrosion after heating within the carbide precipitation range of 425 Degree C – 850 Degree C. A limitation with Stainless Steel 304L Hexagon Reducing Nipple is that titanium does not transfer well across a high temperature arc, so is not recommended as a welding consumable.

In general, Stainless Steel 304L Hexagon Nipple is referred as alloy steel when content of Manganese – 1.65 %, Silicon – 0.6 % & copper 0.6 % exceeds the limit. Stainless Steel 304L One End Threaded Nipple is the grade of choice for applications in the temperature range of up to about 900 Degree C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion.

Stainless Steel 304L Nipple

Elements with a lower percentage i.e. less than 5 % are added to increase the strength and harden ability of SS 304L Both End Threaded Nipple, whereas in larger percentage to achieve special properties like corrosion resistance, high temperature sustainability, and high yield and impact results. Stainless Steel 304L Concentric Swaged Nipple is heat resistant, titanium stabilized, austenitic alloy that’s commonly used for service in the 1000 Degree F – 1600 Degree F temperature range. SS 304L Eccentric Swaged Nipple is primarily used in applications that involve continuous and intermittent service temperatures within the carbide precipitation range of 800 Degree F – 1500 Degree F.

Specification Of Stainless Steel 304L Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 304L Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
304L min. – – – – – 18.0 – 8.00 –
max. 0.030 2.0 0.75 0.045 0.030 20.0 12.00 0.10

Stainless Steel 304L Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304L 485 170 40 92 201

Equivalent Grades for 304L Stainless Steel Nipple

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304L S30403 304S31 58E 1.4306 / 1.4307 X5CrNi18-10 2332 SUS 304L

Stainless Steel 304L Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 304L Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-05T18:41:09+05:30April 5th, 2021|

Stainless Steel 304 Nipple Manufactures In India

Stainless Steel 304 Nipple Manufactures In India

Sachiya Steel International is one of the renowned producer & wholesaler of Stainless Steel 304 Nipple, which is the standard molybdenum – bearing grade and second in importance to 316 amongst the austenitic stainless steels. Stainless Steel 304 Hexagon Reducing Nipple is the low carbon version of 316 and is immune from sensitization (grain boundary carbide precipitation); as a result, it is extensively used in heavy gauge welded components.

Stainless Steel 304 Hexagon Nipple is usually regarded as the standard “marine grade stainless steel”, but it is not resistant to warm sea water. Stainless Steel 304 One End Threaded Nipple has good oxidation resistance in intermittent service to 870 Degree C and in continuous service to 925 Degree C. Continuous use of Stainless Steel 304 Both End Threaded Nipple in the 425 Degree C – 860 Degree C range is not recommended if subsequent aqueous corrosion resistance is important. In many marine environments, Stainless Steel 304 Concentric Swaged Nipple does exhibit surface corrosion, usually visible as brown staining.

Stainless Steel 304 Nipple

Stainless Steel 304 Eccentric Swaged Nipple, with its higher carbon content has application at elevated temperatures. The molybdenum gives 304 Stainless Steel Nipple better overall corrosion resistant properties, particularly higher resistance to pitting and crevice corrosion in chloride environments. Alloy 304 Nipple has excellent forming and welding characteristics, which is particularly associated with crevices and rough surface finish. The austenitic structure also gives Grade 304 Nipple excellent toughness, even down to cryogenic temperatures.

Stainless Steel 304 Nipple Specification
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 304 Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
304 min. – – – – – 18.0 – 8.0 –
max. 0.08 2.0 0.75 0.045 0.030 20.0 10.5 0.10

Stainless Steel 304 Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304 515 205 40 92 201

Equivalent Grades for 304 Stainless Steel Nipple

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304 S30400 304S31 58E 1.4301 X5CrNi18-10 2332 SUS 304

Stainless Steel 304 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 304 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing


We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-08T13:06:36+05:30April 5th, 2021|

SACHIYA STEEL INTERNATIONAL

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top